RG2-L2-3V

HIGH FREQUENCY RG RELAYS WITH 1C AND 2C CONTACTS RG-RELAYS 25 .984 19 .748 10.4 .409 25 .984 23 .906 9.9 .390 1 Form C • Excellent high frequency characteristics Isolation: Min. 65dB (at 900 MHz) Insertion loss: Max. 1.0 (at 900 MHz) • Wide selection Characteristic impedance: 50 Ω type and 75 Ω type Coil: Single side stable and latching type • 1 A 24 V DC switching capacity • Sealed construction for automatic cleaning • High sensitivity 350W (1 Form C) in small size 2 Form C mm inch SPECIFICATIONS Contact Arrangement Contact material Initial contact resistance, max. (By voltage drop 6 V DC 1 A) Max. switching power Max. switching voltage Rating (resistive) Max. switching current Nominal switching capacity High frequency characteristics (at 900 MHz) Isolation Insertion loss V.S.W.R. Mechanical Expected life (min. operations) Electrical 1 A 24 V DC 1 Form C, 2 Form C Gold-clad silver 100 mΩ 24 W 24 V DC 1A 1 A 24 V DC 50 Ω Min. 65 dB Max. 1 dB Max. 1.2 5×106 105 75 Ω Min. 65 dB Max. 1 dB Max. 2.0 Characteristics Initial insulation resistance*1 Between open contacts Initial breakdown Between contacts and coil voltage*2 Between contacts and earth terminal Operate time*3 (at nominal voltage) Release time*3 (at nominal voltage)(without diode) Set time*3 (at nominal voltage) Reset time*3 (at nominal voltage) Min. 100 MΩ at 500 V DC 1,000 Vrms 2,000 Vrms 500 Vrms Coil (polarized) (at 25°C, 68°F) Single side stable 1 coil latching 2 coil latching 1 Form C 350 mW 175 mW 350 mW 2 Form C 400 mW 200 mW 400 mW Approx. 10 ms Approx. 5 ms Approx. 7 ms Approx. 7 ms Max. 55°C with nominal coil voltage Temperature rise (at 20°C) across coil and at nominal switching capacity Functional*4 Min. 196 m/s2 {20 G} Shock resistance 5 Destructive* Min. 980 m/s2 {100 G} 10 to 55 Hz Functional*6 at double amplitude of 2 mm Vibration resistance 10 to 55 Hz Destructive at double amplitude of 2 mm Conditions for operation, Ambient –50°C to 60°C transport and storage temp. –58°F to 140°F (Not freezing and condens5 to 85%R.H. ing at low temperature) Humidity Unit weight Remarks * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as “Intial breakdown voltage” section *2 Detection current: 10mA *3 Excluding contact bounce time *4 Half-wave pulse of sine wave: 11ms; detection time: 10µs *5 Half-wave pulse of sine wave: 6ms *6 Detection time: 10µs 1 C type 2 C type Approx. 8 g .282 oz Approx. 10 g .353 oz TYPICAL APPLICATIONS • Measuring instrument • Testing equipment • CATV converter • Audio visual equipment • TV game set ORDERING INFORMATION Ex. RG 1 T L 5V Contact arrangement Characteristic impedance Nil: 75 Ω T: 50 Ω Operating function Nil: Single side Nil: stable L: 1 coil latching L2: 2 coil latching Coil voltage DC: 3, 5, 6, 9, 12, 24, 48 V 1:1 Form C 2:2 Form C Note: Standard packing; Carton: 50 pcs. Case 500 pcs. 105 RG TYPES ANE COIL DATA (at 20°C 68°F) 1 Form C Single side stable Part No. RG1-3V RG1T-3V RG1-5V RG1T-5V RG1-6V RG1T-6V RG1-9V RG1T-9V RG1-12V RG1T-12V RG1-24V RG1T-24V RG1-48V RG1T-48V Nominal voltage V DC 3 5 6 9 12 24 48 Pick-up voltage, max. V DC 2.4 4.0 4.8 7.2 9.6 19.2 38.4 Drop-out voltage, min. V DC 0.3 0.5 0.6 0.9 1.2 2.4 4.8 Coil resistance, Ω (±10%) 25.7 71.4 103 231 411 1,646 6,583 Nominal operating current, mA 117.3 70.3 58.3 38.9 29.2 14.6 7.3 Nominal operating power, mW 350 350 350 350 350 350 350 Maximum allowable voltage, V DC (40°C 104°F) 3.6 6.0 7.2 10.8 14.4 28.8 57.6 1 coil latching Part No. RG1-L-3V RG1T-L-3V RG1-L-5V RG1T-L-5V RG1-L-6V RG1T-L-6V RG1-L-9V RG1T-L-9V RG1-L-12V RG1T-L-12V RG1-L-24V RG1T-L-24V RG1-L-48V RG1T-L-48V Nominal voltage V DC 3 5 6 9 12 24 48 Set and reset voltage, V DC (max.) 2.4 4.0 4.8 7.2 9.6 19.2 38.4 Coil resistance, Ω (±10%) 51.4 142.8 206.8 462.8 822.8 3,292.8 13,166.8 Nominal operating current, mA 58.3 35.8 29.2 19.4 14.6 7.3 3.6 Nominal operating power, mW 175 175 175 175 175 175 175 Maximum allowable voltage, V DC (40°C 104°F) 3.6 6.0 7.2 10.8 14.4 28.8 57.6 2 coil latching Part No. RG1-L2-3V RG1T-L2-3V RG1-L2-5V RG1T-L2-5V RG1-L2-6V RG1T-L2-6V RG1-L2-9V RG1T-L2-9V RG1-L2-12V RG1T-L2-12V RG1-L2-24V RG1T-L2-24V RG1-L2-48V RG1T-L2-48V Nominal voltage V DC 3 5 6 9 12 24 48 Set and reset voltage, V DC (max.) 2.4 4.0 4.8 7.2 9.6 19.2 38.4 Coil resistance, Ω (±10%) Coil 1 25.7 71.4 103 231 411 1,646 6,583 Coil 2 25.7 71.4 103 231 411 1,646 6,583 Nominal operating current, mA 117.8 70.8 58.3 38.9 29.2 14.6 7.3 Nominal operating power, mW 350 350 350 350 350 350 350 Maximum allowable voltage, V DC (40°C 104°F) 3.6 6.0 7.2 10.8 14.4 28.8 57.6 2 Form C Single side stable Part No. RG2-3V RG2T-3V RG2-5V RG2T-5V RG2-6V RG2T-6V RG2-9V RG2T-9V RG2-12V RG2T-12V RG2-24V RG2T-24V RG2-48V RG2T-48V Nominal voltage V DC 3 5 6 9 12 24 48 Pick-up voltage, max. V DC 2.4 4.0 4.8 7.2 9.6 19.2 38.4 Drop-out voltage, min. V DC 0.3 0.5 0.6 0.9 1.2 2.4 4.8 Coil resistance, Ω (±10%) 22.5 62.5 90 202.5 360 1,440 5,760 Nominal operating current, mA 133.8 80.8 66.7 44.4 33.3 16.7 8.3 Nominal operating power, mW 400 400 400 400 400 400 400 Maximum allowable voltage, V DC (40°C 104°F) 3.6 6.0 7.2 10.8 14.4 28.8 57.6 106 RG 1 coil latching Part No. RG2-L-3V RG2T-L-3V RG2-L-5V RG2T-L-5V RG2-L-6V RG2T-L-6V RG2-L-9V RG2T-L-9V RG2-L-12V RG2T-L-12V RG2-L-24V RG2T-L-24V RG2-L-48V RG2T-L-48V Nominal voltage V DC 3 5 6 9 12 24 48 Set and reset voltage, V DC (max.) 2.4 4.0 4.8 7.2 9.6 19.2 38.4 Coil resistance, Ω (±10%) 45 125 180 405 720 2,880 11,520 Nominal operating current, mA 66.7 40.8 33.3 22.2 16.7 8.3 4.2 Nominal operating power, mW 200 200 200 200 200 200 200 Maximum allowable voltage, V DC (40°C 104°F) 3.6 6.0 7.2 10.8 14.4 28.8 57.6 2 coil latching Part No. RG2-L2-3V RG2T-L2-3V RG2-L2-5V RG2T-L2-5V RG2-L2-6V RG2T-L2-6V RG2-L2-9V RG2T-L2-9V RG2-L2-12V RG2T-L2-12V RG2-L2-24V RG2T-L2-24V RG2-L2-48V RG2T-L2-48V Nominal voltage V DC 3 5 6 9 12 24 48 Set and reset voltage, V DC (max.) 2.4 4.0 4.8 7.2 9.6 19.2 38.4 Coil resistance, Ω (±10%) Coil 1 22.5 62.5 90 203 360 1,440 5,760 Coil 2 22.5 62.5 90 202.5 360 1,440 5,760 Nominal operating current, mA 133.8 80.8 66.7 44.4 33.3 16.7 8.3 Nominal operating power, mW 400 400 400 400 400 400 400 Maximum allowable voltage, V DC (40°C 104°F) 3.6 6.0 7.2 10.8 14.4 28.8 57.6 DIMENSIONS 1 Form C type 21 .827 15 .591 mm inch PC board pattern (Copper-side view) 2.54 .100 11-1 DIA 11-.039 DIA. 2.54 .100 5.08 15.24 .200 .600 20.32 .800 25 .984 2.61 .103 7.62 2.54 .300 19 .100 .748 9.9 .390 0.5 .020 3.7 .146 Tolerance: ±0.1 ±.004 Schematic (Bottom view) Deenergized condition Reset condition 12 345 6 17 18 7 12 + 15 – 16 345 6 17 18 7 Set coil 3–0.5×0.4 .020×.016 Reset condition 12 – 15 + 16 345 6 17 18 7 + – Reset coil 4–0.4×0.25 .016×.010 4–0.4×0.4 .016×.016 – 15 + 16 Tolerance: ±0.3 ±.012 Single side stable 1 coil latching 2 coil latching 107 RG 2 Form C type PC board pattern (Copper-side view) 21 .827 19 .748 mm inch 2.54 .100 9.4 .370 0.5 .020 3.7 .146 2.54 .100 18-1 DIA 18-.039 DIA. 5.08 15.24 .200 .600 20.32 .800 25 .984 6–0.5×0.4 .020×.016 2.54 .100 17.78 .700 23 .906 Tolerance: ±0.1 ±.004 Schematic (Bottom view) 12 – 15 + 16 89 10 11 12 345 6 17 18 13 14 7 12 + 15 – 16 89 10 11 12 345 6 17 18 13 14 7 Set coil 12 – 15 + 16 89 10 11 12 345 6 7 Reset coil 8–0.4×0.25 .016×.010 4–0.4×0.4 .016×.016 17 + 18 – 13 14 General tolerance: ±0.3 ±.012 Single side stable Deenergized condition 1 coil latching Reset condition 2 coil latching Reset condition REFERENCE DATA 1. Isolation RG2-12V 75 Ω characteristic impedance 100 RG2T-12V 50 Ω characteristic impedance 100 Isolation, Isolation, dB Isolation, dB 50 50 0 500 Frequency, MHz 1000 0 500 Frequency, MHz 1000 2. Insertion loss RG2-12V 75 Ω characteristic impedance RG2T-12V 50 Ω characteristic impedance Insertion loss, dB 5 Insertion loss, dB 0 500 Frequency, MHz 1000 5 0 0 0 500 Frequency, MHz 1000 108 RG 3. Return loss RG2-12V 75 Ω characteristic impedance 100 RG2T-12V 50 Ω characteristic impedance 100 Return loss, dB 50 Return loss, dB 0 500 Frequency, MHz 1000 50 0 500 Frequency, MHz 1000 4-(1). Operate and release time (1C) RG1-12V 6 pcs. 4-(2). Set and reset time (1C) RG1-L2-12V 6 pcs. 4-(3). Operate and release time (Without diode) (2C) RG2-12V 6 pcs. 15 Operate and release time, ms 15 Operate and release time, ms Operate time Release time 15 Set time Reset time Set and reset time, ms Operate time Release time 10 Max. Max. x x Min. Min. 10 10 Max. Max. x x Min. Min. 5 5 Max. Max. x x Min. Min. 5 0 80 100 120 0 80 100 120 0 80 100 120 Coil voltage, %V Coil voltage, %V Coil voltage, %V 4-(4). Set and reset time (2C) RG2-L2-12V 6 pcs. 5-(1). Bounce time (2C) RG2-12V 100 pcs. Nominal voltage is applied. 100 Set time Reset time 100 15 Operate bounce Release bounce Set and reset time, ms Frequency 50 Frequency 0 0.5 1.0 1.5 2.0 2.5 Operate bounce, ms 10 50 5 Max. Max. x x Min. Min. 0 0 80 100 120 Coil voltage, %V 0 0 0.5 1.0 1.5 2.0 2.5 Release bounce, ms 5-(2). Bounce time (2C) RG2-L2-12V 100 pcs. Nominal voltage is applied. 100 100 Set bounce Reset bounce Frequency 50 Frequency 0 0.5 1.0 1.5 2.0 2.5 Set bounce, ms 50 0 0 0 0.5 1.0 1.5 2.0 2.5 Reset bounce, ms 109 RG 6-(1). Mechanical life (1C) RG1-12V 12 pcs. 6-(2). Mechanical life (1C latching type) RG1-L2-12V 6 pcs. 10 Pick-up and drop-out voltage 8 Set and reset voltage, V Max. x Min. Pick-up voltage 10 Max. Max. x x Min. Min. 8 6 6 4 Drop-out voltage 2 Max. x Min. 0 100 200 300 400 No. of operations, ×104 500 4 2 Set voltage Reset voltage 0 100 200 300 400 No. of operations, ×104 500 7-(1). Electrical life (10 mA 24 V DC resistive load) RG2-12V 6 pcs. 100 Contact resistance, mΩ 7-(2). Electrical life (1 A 24 V DC resistive load) RG2-12V 6 pcs. 100 Contact resistance, mΩ 80 80 Max. 60 x Min. 20 60 Max. x Min. 40 40 20 0 2 4 6 8 No. of operations, ×104 10 0 2 4 6 8 No. of operations, ×104 10 8-(1). Rate of change in pick-up and drop-out voltage (1C) RG1-12V 5 pcs. 40 30 Rate of change, % 20 10 0 Drop-out voltage Pick-up voltage RG1-L2-12V 5 pcs. 40 Set voltage 30 Rate of change, % 20 10 0 Reset voltage –10 –20 –30 –40 –20 0 20 40 60 80 Ambient temperature, °C –10 –20 –30 –40 –20 0 20 40 60 80 Ambient temperature, °C 8-(2). Rate of change in pick-up and dropout voltage (2C) RG2-12V 5 pcs. 40 30 Rate of change, % 20 10 0 Pick-up voltage Rate of change, % RG2-L2-12V 5 pcs. 40 30 20 10 0 –10 –20 –30 Reset voltage Set voltage –10 Drop-out voltage –20 –30 –40 –20 0 20 40 60 80 Ambient temperature, °C –40 –20 0 20 40 60 80 Ambient temperature, °C 110 RG Test condition mm inch Spectrum analyzer RG relay Measurement tool 50 Ω or 75 Ω NM type connector 1. Characteristic impedance of all the measuring devices (signal generator and cable) is 50Ω or 75Ω. 2. The PC board for the test is double side copper clad phenolic paper laminate with thickness of 1.6 mm. 3. Grounding terminal holes are plated through. 4. Grounding terminal and one of the coil terminals are soldered to the PC board to be grounded. 5. Connection with measurement instrument is made with semi-rigid cable (Uniform Tube UT 141A) and high frequency NM type connector. A 1.5 dia. .059 40 70 2.756 1.575 1.0 dia. .039 2.5 .098 3.5 .138 Expanslon of A 40 1.575 70 2.756 PC board pattern NOTES 1. Soldering Perform soldering under the conditions below. • Within 10s at 250°C 482°F • Within 5s at 300°C 572°F • Within 3s at 350°C 662°F 2. Counter voltage of DC relays If input is cut off in DC relays, a counter voltage is developed across the coil as a result of the collapse of the magnetic field. If the coil is used in a transistor circuit, the reverse voltage produced from the coil can cause a serious circuit malfunction. This counter voltage can be reduced considerably by connecting a capacitor or a diode in parallel with the coil. The level of reduction must be determined either by calculation if the coil data is available or by experiment. (1) Capacitor SW Relay Ry E E r Capacitor Relay Ry (2) Diode SW Diode 3. Latching relay In order to assure proper operating regardless of changes in the ambient usage temperature and usage conditions, nominal operating voltage should be applied to the coil for more than 40 ms to set/reset the latching type relay. For Cautions for Use, see Relay Technical Information (Page 48 to 76). 9/1/2000 All Rights Reserved, © Copyright Matsushita Electric Works, 111 Ltd. Go To Online Catalog