RP-SDFC01DA1

RP-SDFxxxDA1 FX Series SD Memory Card, Industrial SLC Model ■ Product Outline FX series are SD/SDHC memory cards adopting built-in industrial type SLC NAND flash memory and is suitable for industrial applications where frequent writes are required. They are adequate for the applications, where large data load are written, such as security camera, factory automation, broadcast equipment and drive recorders. They are formatted complying with SD card specification. ■ Product Specification（specifications and appearances may be changed without notice.） 512MB 1GB 2GB 4GB 8GB 16GB Appearance Part Number Capacity Available user data area capacity *1) SD Physical Specification Compliant Specification Backside mark Read/Write Performance (up to) Absolute Maximum Ratings RP-SDFC51DA1 RP-SDFC01DA1 RP-SDF02GDA1 RP-SDFC04DA1 RP-SDFC08DA1 RP-SDFC16DA1 495,190,016 byte 990,576,640 byte 3,955,195,904 byte 8,048,836,608 byte 16,198,369,280 byte Ver. 3.01 SD speed class UHS speed grade --- Speed mode Default Speed mode, High Speed mode Default Speed mode, High Speed mode, UHS-I (SDR12, SDR25, DDR50, SDR50, SDR104) Control Code RABN RABN R2B9 RAB9 RABK RAB9 Read 22MB/s 22MB/s 22MB/s 90MB/s 90MB/s 95MB/s 40MB/s 25MB/s 80MB/s Write (High Speed) (High Speed) (High Speed) 20MB/s 20MB/s 20MB/s (High Speed) (High Speed) (High Speed) (SDR104) (SDR104) Supply Voltage Min : -0.3 V ; Max : +4.6 V Input Voltage Min : -0.3 V ; Max : VDD +0.3 V Output Voltage Min : -0.3 V ; Max : VDD +0.3 V Output Current Min : -24 mA ; Max : +24 mA Operating Temperature Storage Temperature Environmental Specification 2,014,445,568 byte (SDR104) (SDR104) (SDR104) (SDR104) -40 degree C to +85 degree C -40 degree C to +85 degree C Humidity 5 % RH to 95 % RH Vibration 15 Gp-p Shock 1,000 G Mating Cycles 10,000 cycles *1) Free user area capacity after formatted. Absolute Maximum Ratings are the values of limitation, which do not damage the card. So those values do not define the operational range. Products comply with EU RoHS directives. Page 1 of 2 (2019.11.11) RP-SDFxxxDA1 ■Laser Mark on the Back-side Capacity Part Number 512MB 1GB 2GB 4GB 8GB 16GB RP-SDFC51DA1 RP-SDFG01DA1 RP-SDF02GDA1 RP-SDFC04DA1 RP-SDFC08DA1 RP-SDF16GDA1 Back side marking “CE” CE Mark “0000” Control Code (Defined as product parts combination) “00000000000” Serial Number The 3rd digit last digit of Manufacture year The 4th digit Manufacture month (January->A, February->B, ) “2GB”, Card Capacity “F” Series name “RP-SDFC51”, “RP-SDFC01”, “RP-SDFC04”, “RP-SDFC08”, “RP-SDFC16” Series name “MADE IN JAPAN” Country of origin ■ System Reliability a. Powerful error detect and corrective function b. Static wear leveling c. Data recovery at power failure in writing d. Automatic refresh function to prevent uncorrectable error e. Bad block management ■ Notice and Caution If you think about the usage for which special quality or reliability of the products is needed and failure or malfunction of the products may directly threaten life or injury for the special usage (aeronautic or cosmic usage, military usage, combustion machine, life support applications or safety applications), please counsel with our contacts in advance. Write frequency and storage temperature will affect data retention time. Please make a backup for important data. ■ Warranty If the product cannot be used because of failure which is determined as defect in design or production of the product, it is replaced by same product or equivalent one within 12 months from the delivery date of product. Page 2 of 2 (2019.11.11)