ideas for life
Type 4 PLe SIL3
LIGHT CURTAIN
SF4B SERIES Ver.2
Conforming to Machine
& EMC Directive
Certified
Certified
(SF4B- only)
Protection structure
IP67
New
ew version with improved environmental
environmenta
resistance performance
Robust type SF4B-□G
2012.02
panasonic.co.jp/id/pidsx/global
Approved Listing
Conforming to
OSHA / ANSI
(SF4B- -03 only)
Conforming to 4584
Excluding SF4B- -03
and SF4B- G
GB
Advanced light curtains
at the forefront of the industry
Protection structure IP67 is achieved in such size
Improved environmental resistance
performance and easier operability New structure
A seamless structure with least seam area possible is newly
developed. The inner unit is protected by a cylindrical inner case.
Seams such as unit and lens surfaces have been greatly reduced, so
that particles such as oil mists and dust are prevented from getting in,
rising its environmental resistance performance.
SF4B series has passed the tests of IP65 and IP67 as
specified by IEC / JIS standards. (Ver.2 only)
IEC / JIS
Description
IP65
No harmful effect due to direct
water jet from any direction
IP67
No water penetration due to immersion
in water under specified conditions
* Refer to each standard for details of test conditions.
Inner case
Cylindrical inner case
protects the internal unit.
This new structure does not use adhesive
or double-sided tape on the joints like
with the previous models. There is no
need to worry about water immersion
or corrosion such as a coolant causing
the adhesive to strip off.
Error details can be understood at a glance
Equipped with a digital error indicator
The system constantly checks the light curtain for problems
such as incorrect cable wiring, disconnection, short-circuits,
internal circuit problems, and incoming light problems. Details
of any electrical problems such as at equipment startup will
appear on the digital display. The inconvenience of the
previous method of counting the number of LED blinks is no
longer needed.
Angle of view is wider and
indicators are even more visible
Error number notification means
smooth support via telephone
Normal operation
Digital error
indicator
Breaking out error
Slim
28 mm 1.102 in
Achieving protection structure IP67 while keeping its slim body.
Locate problems easily and quickly
Light curtain diagnosis software
Free download available from our website.
Simply select the error no. that is displayed on the light curtain on the PC screen, and the section of error will be displayed
visually. Coping process is also displayed for a quick resolution of the problem.
STEP
1
Select the number of connected light curtains (1, 2, 3)
STEP
2
Enter the error condition (error no.) (0, 1…9, F)
Diagnosis starts!
Section of error blinks
Coping process is displayed
● No need to connect to light curtain
● Software can diagnose as many light curtains as possible
● Diagnosis on the spot to ensure maintenance
● Misconnection can also be diagnosed, which contributes to
shortened start-up time
[Diagnosis software operation conditions]
Operable in Windows Vista / XP / XP embedded (Jap / Eng).
Approx. 1.5 MB of free space is required.
* Windows® is a registered trademark of Microsoft Corporation in the United States and other countries.
Resistant to impact, lessening damage to workpiece
Robust type SF4B-□G
Thick and robust housing resistant to impact
The SF4B-G series light curtain is enclosed in a 5 mm (0.197 in) thick robust
metal case, protecting the workpiece from various types of impact, such as
collision or being stepped on.
Average
thickness
5 mm
0.197 in
Stepped on - Kicked
Collision - Impact
Loads applied - Dropped
No guard needed
Front protection cover
The robust light curtain can be used without an L-shape or U-shape guard,
reducing installation and maintenance.
The front protection cover
protects the sensing surface from
welding spatter and other grime,
and reduces damage due to
collisions. The beam axis adjuster
can be attached without removing
the front protection cover.
Front protection
cover
U-shape /
L-shape guard
Fully protected sensing surface
IP67 protected structure
The sensing surface is fully protected by narrowing and deepening the exposed
area of the sensing surface.
The seamless structure protects
the sensor from being exposed to
water.
Previous product
SF4B-G SERIES
Collision with
sensing surface
Sensing surface
protected
Narrow
Deep
Robust
The inner unit is fully protected with a thick metal case. Impact
between the workpiece and the sensor is prevented by narrowing
and deepening the exposed area of the sensing surface.
Round design minimizes damage to the workpiece
Mounting bracket for simple & secure installation
The case is designed so that shock upon impact is dissipated
alleviating potential damage to the workpiece in the event of a collision.
The light curtain and the mounting bracket are firmly
secured with just two bolts.
The light curtain is situated in the center of the mounting
bracket, preventing beam axis deviation. The dimple
structure makes alignment easy to adjust.
Previous product
SF4B-G SERIES
Large impact on collision
Small impact on collision
Workpiece not contaminated with paint
The body has a alumite-treated case whereby paint does
not stick to the workpiece in the event of a collision.
M5 beam axis
adjustment bolt
Thickness
Dimple structure
0.157 in
M8 center
attachment bolt
4 mm
M5 bolt × 2
Enables series connection with standard type possible
Black and yellow caution tape
The mating cable is standard, allowing the robust and
standard types to be connected in series. The mating
cable can be removed or attached while the mounting
bracket is fixed, allowing easy maintenance.
Black and yellow striped attention tape is attached to the
side of the light curtain, alerting workers to use caution.
Hazardous openings are very obvious.
Caution tape
• SF-TP-BG10
Standard type
Robust type
Standard type
Use robust type only for required sections
The cylindri
cylindrical frame
fram construction allows mechanical shock to dissipate
upon impact, minimizing
nimi
severe damage in the event of a collision.
This unique design
n minimizes
m
the possibility of beam axis
xis misalignment
and provides a saferr workplace.
w
Special tape
• Fit to width of light curtain
• Made of fabric, making it easy to cut
• Prevents scratches in the event of a collision
Impact-friendly
structure
A universal design that can be used anywhere in the world
In Europe, America and Japan
PNP output and NPN output
in a single model!
Europe
IEC 61496-1/2, EN ISO
55011,
13849-1
EN 61496-1
and EN 55011, etc,
North
America
UL 61496-1/2,
ANSI/UL
61496-1/2,
UL 1998,
UL 1998,
CSA, CSA
OSHA/ANSI
and OSHA/ANSI, etc,
South
Korea
Sl-G-35-2005, S2-W-11-2003 (Note)
China
GB 4584 (Note)
Note: Except for SF4B-□G
Supports both PNP and NPN polarities in a single model
The SF4B series combines PNP transistor output and NPN transistor output in a single model. Overseas equipment that uses
PNP, replacement with NPN sensors, factories that are positively grounded, and transfer of equipment overseas are all
situations where the control circuits for a single model are suitable for use worldwide.
■ Polarity can be changed easily by changing wiring
When the output polarity setting wire (shielded) is
connected to 0 V, PNP output is selected, and when it
is connected to 24 V, it switches to NPN output.
PNP circuit
0V
Output polarity setting wire (Shield)
NPN circuit
24 V
Output polarity setting wire (Shield)
Control output (OSSD)
Connect to 0 V
Connect to 24 V
Not connected / open
PNP output
NPN output
Error
PNP / NPN polarity indicator
Either PNP or NPN side lights
depending on which is selected.
Global support for press machine / shear (paper cutting machine) safety
Can be widely used for press machines and other types of equipment from Japan, Europe, North America, South Korea,
and China.
●: Available
Type
Model No.
SF4B-□
SF4B-□-01
Light
curtains SF4B-□G
SF4B-□-03
SF-C11
SF-C12
Control
SF-C13
units
SF-C14EX
SF-C14EX-01
Machinery EMC
UL
Japanese Press
Japanese Shear
S-mark
Korean Press / Chinese GB
Directive Directive Certified Machine Support (Paper Cutter) Support certification Cutting Machine Compatibility
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
● (No.TA347)
● (No.TA348) (Note 1)
● (No.TA349) (Note 1)
● (No.TA350) (Note 1)
Note: In combination with SF4B-□-01. Please inquire for the details.
● (No.TA363)
-
●
●
●
-
● (No.09-AV4BI-0001 to 0009)
-
●
●
-
A unified response time of 14 ms for all models
makes setup easy
A fast response time of 14 ms has been achieved regardless of the number of beam
channels, the beam axis pitches and the number of units connected in series. This reduces
calculation work required for the safety distance.
Safety distance
Same response
time of
14 ms
Safety distance
Characteristic distance for the machinery’s
maximum stopping time
Finger protection type
28 mm* 1.102 in
Hand protection type
or
116 mm*4.567 in
Dangerous source
Safety distance
Characteristic
distance for
light curtain
Characteristic distance
for the machinery’s
maximum stopping time
SF4B series
Characteristic distance
for SF4B series
14 ms even in case of 3 units connected in series!
28 mm* 1.102 in
(Finger protection type)
* This is the characteristic safety distance for the light curtain as defined by ISO 13855.
Calculate the safety distance by including the machinery’s maximum stopping time.
Furthermore refer to the relevant standards of the region where this device is to be used,
and then install this device.
* Series connection allows max. 3 sets or a total of
up to 192 beam channels.
It is possible to select from among each three types of standard/Robust types according to the worksite
A wide range of variations are available with protective heights of 230 to 1,910 mm 9.055 to 75.197 in (1,270 mm 50.000 in
for the finger protection type). Mixing six types in a series connection is also possible.
Finger protection type
SF4B-F□(G)
Hand protection type
SF4B-H□(G)
Arm / Foot protection type
SF4B-A□(G)
Minimum sensing object
Minimum sensing object
Minimum sensing object
ø0.551 in
ø0.984 in
ø1.772 in
ø14mm
mm
(10 mm 0.394 in beam pitch)
ø25mm
mm
(20 mm 0.787 in beam pitch)
ø45mm
mm
(40 mm 1.575 in beam pitch)
Muting control function is built into light curtain
Safety circuits are selectable
A muting control function is provided to increase both safety and productivity
(excluding SF4B-□-03)
The light curtain is equipped with a
muting control function that causes the
line to stop only when a person passes
through the light curtain, and does not
stop the line when an object passes
through. The muting sensors and
muting lamps can be connected
directly to the light curtain so that a
exclusive controller is not required for
muting. This both reduces costs and
increases safety and productivity.
Muting sensors
Muting
lamps
Muting lamps
Light curtain
SF4B series
SF4B
series
External device
(Force-guided relay, etc.)
Muting sensors
CX-400 series
Motor, etc.
Override function allows the line to be restarted smoothly after it has stopped while muting control was active
In case the power turns off while the
light curtain has been interrupted by an
object or in case the line stops before
the muting conditions have been
established (if only one muting sensor
has been interrupted), the line can be
restarted smoothly without having to
remove the object that is interrupting
the light curtain.
(excluding SF4B-□-03)
(e.g.) When power turns off while light curtain was interrupted
SF4B series
Previous model
Removal
operation
unnecessary
Removal
operation
required
Object must be removed before restart
Smooth restart
Equipped with a safety circuit that does not require an exclusive safety relay unit
The light curtain has a built-in external
device monitoring function (such as for
fused relay monitoring) and an
interlock function. The safety circuit is
constructed so that a separate safety
relay unit is not needed, and the
control board has become smaller to
help to contribute to lower costs.
Previous model
Reset input
Monitor
Light curtain
Safety relay unit
External devices
(Force-guided relay, etc.)
Motor, etc.
SF4B series
Reset input
No safety relay
unit needed
Smaller
control board
Monitor
SF4B series
Built-in external
device monitoring
function
●Safety relay
Panasonic Corporation
SF series
External devices
(Force-guided relay, etc.)
Safety relay
DIN terminal block
Note: Contact the manufacturers for details on the recommended products.
Motor, etc.
A commitment to design that is easy to use
Beam-axis alignment indicators show the incident light position at a glance
Beam-axis alignment indicators display the beam channels of the light curtain in four blocks. When the beam channel at the
bottommost channel (or topmost channel), which is used as a reference for beam-axis alignments, is correctly aligned, the
LED blinks red. After this, each block lights red as the beam axes successively become aligned. When all channel beam axes
are aligned, all LEDs light green. The display also has a stability indicator (STB) added so that setup can be carried out with
greater stability.
The bottommost channel
beam axis is aligned
Only the beam axes of the
two lower blocks are aligned
All channel beam axes
are aligned
4 block
Beam channels are
displayed in 4 blocks
3 block
Blinking
OSSD
STB
1 block
OSSD
STB
A
B
C
D
A
B
C
D
Light
up
OSSD
STB
Light
up
Light
up
OSSD
STB
2 block
A
B
C
D
A
B
C
D
The bottommost LED ‘D’
is blinking red
The bottom two LEDs ‘C, D’
light up in red
All LEDs ‘A to D’
light up in green
Furthermore, STB display
allows the most stable incident
light status* to be confirmed.
* 140 % or more incident light intensity
of control output operation level
Laser alignment tool for easy installation
Greatly improved ease of installation
The tool performs beam-axis alignment using a laser
beam spot. As the tool is battery-operated, it is possible
to perform beam-axis alignment before actual powering
on the equipment.
The hexagon-socket head bolts used for aligning the
beam axis can be tightened from the front of the light
curtain. Beam adjustment can be carried out easily while
checking on
360° rotation
Hexagon-socket
the bolts.
when used with M5 hexagon-socket
head bolt for beam-axis
Also, the
head bolt for alignment
alignment (up to ±15˚)
beam-axis
alignment
part is directly
fixed by M5
bolts to
prevent beam
Hexagon-socket
misalignment.
head bolt for alignment
Laser alignment tool
The topmost channel beam axis
is correctly aligned
Visible red spot!
(excluding SF4B-□G)
(360˚ rotation for every 30˚)
Mode
Made of die-cast!
Align from the front!
Direct fixing to prevent misalignment!
Few number of bolts!
Hexagonal wrench
The bottommost channel beam axis
is correctly aligned
Easy to distinguish receiver and emitter
Emitter is in gray; receiver is in black. Whether during
startup or maintenance, troubles due to incorrect wiring
or false recognition can be greatly reduced. Moreover,
model No. can be confirmed from the front face of the
light curtain.
Black connector Gray cable with black line Black cover
Receiver
RECEIVER
SF-4B-00 V2 RECEILVER Type4
Model No. is shown on the front face of the sensor
Emitter
SF-4B-00 V2 EMITTER Type4
Gray connector
Gray cable
Gray cover
EMITTER
Mutual interference is reduced without
needing for interference prevention lines
Reducing the number of malfunctions
caused by extraneous light
The light curtain is equipped with the ELCA (Extraneous
Light Check & Avoid) function. Because it automatically
shifts the scan timing of the light curtain in order to avoid
interference, it is not necessary to wire interference
prevention lines between machineries.
Double scanning method and retry processing are two
new functions exclusive to our company, which are
effective in eliminating the effects of momentary
extraneous light from peripheral equipment. The
reduction in operating errors caused by extraneous light
reduces frequent stopping of machinery.
Options exclusive for light curtain are available
for an easy construction of safety circuit
Handy-controller SFB-HC* that enables
the user to select a variety of settings
SFB-HC
Separate muting control function for each beam channel
The handy-controller SFB-HC* (optional) can be used to
carry out muting control for specified beam channels
only. Because individual beam channel can be specified
to suit the object, separate guards to prevent entry do
not need to be set up.
While muting control is active (line operating)
Line stopped
SFB-HC
For example, depending on the height of the object, the muting function
can be activated for 10 beam channels starting from the bottom, so that
if the 11th or subsequent beam channels are interrupted, it is judged that
a person has entered the area and the line stops.
* A handy-controller cannot be used with the SF4B-□-01,
SF4B-□-03 and the SF-C14EX-01.
Any valid beam channels can be selected
The SF4B series incorporates a fixed blanking function.
Non-specified beam channels can be deactivated
The SF4B series incorporates a floating blanking function.
The SF4B series is equipped with a fixed blanking function which
allows specific beam channels to be selectively interrupted without
causing the control output (OSSD) to output the OFF signal. This
function is convenient for use with applications in which certain
fixed obstacles tend to block specific beam channels.
Furthermore, this function provides greater safety as the control
output (OSSD) will automatically output the OFF signal if the fixed
obstacles are subsequently removed from the sensing area.
1, 2 or 3 non-specified beam channels can be deactivated. If the
number of beam channels that are blocked is less than or equal to
the set number of beam channels, then the control output (OSSD)
will not output the OFF signal. This function is useful in the event
when the positions of obstacles within the sensing area must be
changed during object rearrangement, or when an object passes
through the light curtain’s sensing area.
Note: When the floating blanking function is used, the size of the
min. sensing object is changed. Refer to “PRECAUTIONS
FOR PROPER USE” (p.36) for details.
Auxiliary output has selectable output configuration
Mode No.
Description
0
1
2
3
4
5
6
7
8
9
Negative logic of the control output (OSSD 1, OSSD 2) (factory setting)
Positive logic of the control output (OSSD 1, OSSD 2)
For emission: output ON, For non-emission: output OFF
For emission: output OFF, For non-emission: output ON
For unstable incident beam: OFF (Note 1)
For unstable incident beam: ON (Note 1)
For muting: ON
For muting: OFF
For beam received: ON, For beam interrupted: OFF (Note 2)
For beam received: OFF, For beam interrupted: ON (Note 2)
Notes: 1) The output cannot be used while the fix blanking
function, floating blanking function or the muting
function is activated.
2) This device outputs the beam received / interrupted
state under activating the auxiliary output switching
function using the handy controller irrespective of
activating other functions, fixed blanking function,
floating blanking function, and muting function.
A variety of other functions can be selected
Emission intensity control function
This function reduces the amount of emitting light. The two modes,
normal mode and short mode, can be selected. The factory setting
is set to the normal mode for the emission intensity control function.
Setting monitoring function
This function allows the user to confirm the details of
each light curtain setting.
Protection function
Unless the password is not input, any setting change
of the light curtain cannot be allowed. The factory
setting is set to invalid for the protect function.
Copy function
Allows settings details to be copied into other light
curtains. In the event that the same setting must be
input into several different light curtains, this function
will reduce the time required for the input of settings.
Muting lamp diagnosis setting
When the muting lamp diagnosis is disabled, the muting
function will continue to operate even if the lamp is blown.
* Refer to the SF4B manual for details.
10
SF4B
Lineup of exclusive control units
SF-C10 series
SF-CL1T264T
Supports both PNP and NPN polarities SF-C10 series
Slim type control unit
A single unit can be used for PNP / NPN input switching,
reducing the number of parts that need to be registered.
Having a thickness of 22.5 mm 0.886 in, it can be
inserted even into narrow spaces inside panels.
Plug-in connector type control unit SF-C11
Application expansion unit SF-C14EX(-01)
Connecting to the light curtain is done using plug-in
connector connections, which shorten setup and
replacement time.
Three safety circuit systems (Light curtain output, Muting
control and Emergency stop button) are collected into a
single unit.
SF-C12
Robust type control unit
The strong metal enclosure has a built-in safety relay.
It has an IP65 protection structure, so that it can be set
up individually without the need to be inserted into a
control panel.
Remote I/O unit
SF-C13
SF-CL1T264T
Connect light curtain and safety components to the
safety field network, CC-Link Safety, and a single
network is complete while achieving wire-saving.
* Refer to our website or general catalog for details.
PRODUCT CONFIGURATION
Mounting bracket and mating
cable are optional.
Muting control components (12-core cable, with interference prevention wire)
Standard components (8-core cable)
7
7
1
1
3
4
2
5
6
2
Component parts
Component parts
1 Light curtain
Required
2 Mounting bracket (Optional)
1 Light curtain
Required
2 Mounting bracket (Optional)
3 8-core bottom cap cable (Optional)
5 12-core bottom cap cable (Optional)
4 8-core extension cable
6 12-core extension cable
7 Cable for series connection
7 Cable for series connection
(Optional, use for cable extension)
(Optional, use for connection in series)
(Optional, use for cable extension)
(Optional, use for connection in series)
11
SF4B
ORDER GUIDE
1 Light curtains Mounting bracket and bottom cap cable are not supplied with the light curtain. Be sure to order them separately.
Min. sensing object ø14 mm ø0.551 in
(10 mm 0.394 in beam pitch)
Min. sensing object ø25 mm ø0.984 in
(20 mm 0.787 in beam pitch)
Hand protection type
Finger protection type
Type
Beam
channel
No.
5 mm
0.197 in
Protective height
0.3 to 7 m
0.984 to 22.966 ft
Beam pitch 5 mm
10 mm
0.197 in
0.394 in
Beam
channel
No.
5 mm
0.197 in
0.3 to 9 m
0.984 to 29.528 ft
Protective height
Beam pitch 5 mm
20 mm
0.197 in
0.787 in
Min. sensing object ø45 mm ø1.772 in
(40 mm 1.575 in beam pitch)
Arm / Foot protection type
0.3 to 7 m
0.984 to 22.966 ft
Beam
channel
No.
Model No. (Note 2)
Number of
Protective height
SFB-HC
Korean Press compliant beam
(mm in)
non‑compatible (SFB-HC non-ompatible) channels
Operating range
(Note 1)
Appearance
15 mm
0.591 in
0.3 to 9 m
0.984 to 29.528 ft
Protective height
Beam pitch
40 mm 1.575 in
15 mm
0.591 in
0.3 to 7 m
0.984 to 22.966 ft
SF4B-F23
SF4B-F23-01
SF4B-F23-03
23
230 9.055
SF4B-F31
SF4B-F31-01
SF4B-F31-03
31
310 12.205
SF4B-F39
SF4B-F39-01
SF4B-F39-03
39
390 15.354
SF4B-F47
SF4B-F47-01
SF4B-F47-03
47
470 18.504
SF4B-F55
SF4B-F55-01
SF4B-F55-03
55
550 21.654
SF4B-F63
SF4B-F63-01
SF4B-F63-03
63
630 24.803
SF4B-F71
SF4B-F71-01
SF4B-F71-03
71
710 27.953
SF4B-F79
SF4B-F79-01
SF4B-F79-03
79
790 31.102
SF4B-F95
SF4B-F95-01
SF4B-F95-03
95
950 37.402
SF4B-F111 SF4B-F111-01 SF4B-F111-03
111
1,110 43.701
SF4B-F127 SF4B-F127-01 SF4B-F127-03
127
1,270 50.000
SF4B-H12
SF4B-H12-01
SF4B-H12-03
12
230 9.055
SF4B-H16
SF4B-H16-01
SF4B-H16-03
16
310 12.205
SF4B-H20
SF4B-H20-01
SF4B-H20-03
20
390 15.354
SF4B-H24
SF4B-H24-01
SF4B-H24-03
24
470 18.504
SF4B-H28
SF4B-H28-01
SF4B-H28-03
28
550 21.654
SF4B-H32
SF4B-H32-01
SF4B-H32-03
32
630 24.803
SF4B-H36
SF4B-H36-01
SF4B-H36-03
36
710 27.953
SF4B-H40
SF4B-H40-01
SF4B-H40-03
40
790 31.102
SF4B-H48
SF4B-H48-01
SF4B-H48-03
48
950 37.402
SF4B-H56
SF4B-H56-01
SF4B-H56-03
56
1,110 43.701
SF4B-H64
SF4B-H64-01
SF4B-H64-03
64
1,270 50.000
SF4B-H72
SF4B-H72-01
SF4B-H72-03
72
1,430 56.299
SF4B-H80
SF4B-H80-01
SF4B-H80-03
80
1,590 62.598
SF4B-H88
SF4B-H88-01
SF4B-H88-03
88
1,750 68.898
SF4B-H96
SF4B-H96-01
SF4B-H96-03
96
1,910 75.197
SF4B-A6
SF4B-A6-01
–
6
230 9.055
SF4B-A8
SF4B-A8-01
–
8
310 12.205
SF4B-A10
SF4B-A10-01
–
10
390 15.354
SF4B-A12
SF4B-A12-01
–
12
470 18.504
SF4B-A14
SF4B-A14-01
–
14
550 21.654
SF4B-A16
SF4B-A16-01
–
16
630 24.803
SF4B-A18
SF4B-A18-01
–
18
710 27.953
SF4B-A20
SF4B-A20-01
–
20
790 31.102
SF4B-A24
SF4B-A24-01
–
24
950 37.402
SF4B-A28
SF4B-A28-01
–
28
1,110 43.701
SF4B-A32
SF4B-A32-01
–
32
1,270 50.000
SF4B-A36
SF4B-A36-01
–
36
1,430 56.299
SF4B-A40
SF4B-A40-01
–
40
1,590 62.598
SF4B-A44
SF4B-A44-01
–
44
1,750 68.898
SF4B-A48
SF4B-A48-01
–
48
1,910 75.197
Notes: 1) The operating range is the possible setting distance between the emitter and the receiver. The light curtain can detect an object less than 0.3 m 0.984 ft away.
Receiver cannot be
placed in this range
Emitter
0.3 m
0.984 ft
Actual operating range
of the light curtain
Receiver
Setting range of
the receiver
9 m 29.528 ft
SF4B-F□, SF4B-H72/H80/H88/H96□, SF4B-A36/A40/A44/A48□,
SF4B-F□G, SF4B-H72G/H80G/H88G/H96G, SF4B-A36G/A40G/A44G/A48G: 7 m 22.966 ft
Receiver
2) The model No. with “E” shown on the label affixed to the product is the emitter, “D” shown on the label is the receiver.
(e.g.) Emitter of SF4B-F23: SF4B-F23E, Receiver of SF4B-F23: SF4B-F23D.
12
SF4B
ORDER GUIDE
1 Light curtains (Robust type) Mounting bracket and bottom cap cable are not supplied with the light curtain. Be sure to order them separately.
Min. sensing object ø14 mm ø0.551 in
(10 mm 0.394 in beam pitch)
Min. sensing object ø25 mm ø0.984 in
(20 mm 0.787 in beam pitch)
Hand protection type
Finger protection type
Type
Appearance
Beam
channel
No.
Operating range
11.8 mm
0.465 in
Protective height
0.3 to 7 m
0.984 to 22.966 ft
Beam pitch 11.8 mm
10 mm
0.465 in
0.394 in
Beam
channel
No.
11.8 mm
0.465 in
Protective height
0.3 to 9 m
0.984 to 29.529 ft
Beam pitch 11.8 mm
20 mm
0.465 in
0.787 in
Min. sensing object ø45 mm ø1.772 in
(40 mm 1.575 in beam pitch)
Arm / Foot protection type
0.3 to 7 m
0.984 to 22.966 ft
Beam
channel
No.
21.8 mm
0.858 in
Protective height
0.3 to 9 m
0.984 to 29.529 ft
Beam pitch
40 mm 1.575 in
21.8 mm
0.858 in
0.3 to 7 m
0.984 to 22.966 ft
Model No.
Number of
beam channels
Protective height
(mm in)
SF4B-F23G
23
244 9.606
SF4B-F31G
31
324 12.756
SF4B-F39G
39
404 15.906
SF4B-F47G
47
484 19.055
SF4B-F55G
55
564 22.205
SF4B-F63G
63
644 25.354
SF4B-F71G
71
724 28.504
SF4B-F79G
79
804 31.654
SF4B-F95G
95
964 37.953
SF4B-F111G
111
1,124 44.252
SF4B-F127G
127
1,284 50.551
SF4B-H12G
12
244 9.606
SF4B-H16G
16
324 12.756
SF4B-H20G
20
404 15.906
SF4B-H24G
24
484 19.055
SF4B-H28G
28
564 22.205
SF4B-H32G
32
644 25.354
SF4B-H36G
36
724 28.504
SF4B-H40G
40
804 31.654
SF4B-H48G
48
964 37.953
SF4B-H56G
56
1,124 44.252
SF4B-H64G
64
1,284 50.551
SF4B-H72G
72
1,444 56.850
SF4B-H80G
80
1,604 63.150
SF4B-H88G
88
1,764 69.449
SF4B-H96G
96
1,924 75.748
SF4B-A6G
6
244 9.606
SF4B-A8G
8
324 12.756
SF4B-A10G
10
404 15.906
SF4B-A12G
12
484 19.055
SF4B-A14G
14
564 22.205
SF4B-A16G
16
644 25.354
SF4B-A18G
18
724 28.504
SF4B-A20G
20
804 31.654
SF4B-A24G
24
964 37.953
SF4B-A28G
28
1,124 44.252
SF4B-A32G
32
1,284 50.551
SF4B-A36G
36
1,444 56.850
SF4B-A40G
40
1,604 63.150
SF4B-A44G
44
1,764 69.449
SF4B-A48G
48
1,924 75.748
Differences from standard type
The Robust type SF4B-□G is different from the standard type SF4B-□ in the following ways:
• Sensing width (protective height) • Profile • Net weight • Mounting bracket
• Large alignment tool • Noncompliant with Japanese and Korean press standard
• Noncompliant with Korean regulations • Noncompliant with Chinese GB standard (acquisition planned)
Other specifications, input/output circuits, and options are common to the standard type.
13
SF4B
ORDER GUIDE
2 Mounting brackets Mounting bracket is not supplied with the light curtain. Be sure to order it separately.
Designation
Model No.
Description
M8 rear mounting
bracket
MS-SFB-7-T
For rear direction. Allows the light curtain to be mounted at the rear with one M8
hexagon-socket-head bolt. (4 pcs. per set for emitter and receiver)
M8 side mounting
bracket
MS-SFB-8-T
For side direction. Allows the light curtain to be mounted at the side with one M8
hexagon-socket-head bolt. (4 pcs. per set for emitter and receiver)
M8 rear / side mounting
bracket set
MS-SFB-1-T2
Can be used as either a rear mounting bracket MS-SFB-7-T or a side mounting
bracket MS-SFB-8-T depending on mounting direction. (4 pcs. per set for emitter and
receiver)
Standard mounting
bracket
MS-SFB-1
Used to mount the light curtain on the rear surface and side surface.
(4 pcs. per set for emitter and receiver)
MS-SFB-1-T
Allows the light curtain to be mounted at the rear and side with one M8 hexagonsocket-head bolt. (4 pcs. per set for emitter and receiver)
MS-SFB-4
Used as the mounting bracket when changing over a previous light curtain with a
protective height of 200 mm 7.874 in or more to the SF4B series. It is installed using
two M5 hexagon-socket-head bolts. (4 pcs. per set for emitter and receiver)
MS-SFB-4-T
Used as the mounting bracket when changing over a previous light curtain with a
protective height of 200 mm 7.874 in or more to the SF4B series. It is installed using
one M8 hexagon-socket-head bolt. (4 pcs. per set for emitter and receiver)
Standard L mounting bracket (For SF4B-□G)
MS-SF4BG-1
Mounting is possible behind or at the side of the light curtain.
Mount with two M5 bolts or one M8 bolt. (4 pcs. per set for emitter and receiver)
Dead zoneless mounting bracket
(Material: Die-cast zinc alloy)
MS-SFB-3
Mounting with no dead zone is possible so that the mounting bracket does not project
past the protective height. (4 pcs. per set for emitter and receiver)
Dead zoneless mounting bracket (For SF4B-□G)
Material:
Mounting bracket ...SPCC (Trivalent chrome plated)
Supporting bracket ...PPS
MS-SF4BG-3
Allows light curtains to be installed cose together, or in locations with installation
restrictions due to equipment columns or jigs. (4 pcs. per set for emitter and receiver)
Rear / side
mounting bracket
(Material: Iron)
M8 mounting
bracket
360° mounting
bracket
Material:
Die-cast zinc alloy
Pitch adapter bracket
* Light curtain can
revolve 360°
horizontally.
M8 pitch adapter
bracket
M8 rear mounting bracket
M8 side mounting bracket
Standard mounting bracket
• MS-SFB-7-T
• MS-SFB-1-T2 (Rear mounting)
• MS-SFB-8-T
• MS-SFB-1-T2 (Side mounting)
• MS-SFB-1
M8 rear mounting bracket
MS-SFB-7-T
MS-SFB-1-T2 (Rear mounting)
M5 (length: 18 mm 0.709 in)
hexagon-socket-head bolt
(Accessory for MS-SFB-7-T
MS-SFB-1-T2 )
M8 mounting hole (for center mounting)
Standard mounting bracket
MS-SFB-1
M5 (length: 18 mm 0.709 in)
hexagon-socket-head bolt
(Accessory for MS-SFB-8-T
MS-SFB-1-T2 )
Light
curtain
Light
curtain
Sensing
surface
Sensing
surface
Four bracket set
Four M5 (length: 18 mm 0.709 in)
hexagon-socket-head bolts are
attached.
14
M8 side mounting bracket
MS-SFB-8-T
MS-SFB-1-T2 (Side mounting)
Four bracket set
Four M5 (length: 18 mm 0.709 in)
hexagon-socket-head bolts are
attached.
M5 mounting hole
(for two-point mounting)
Light
curtain
M5 (length: 18 mm 0.709 in)
hexagon-socket-head bolt
(Accessory for MS-SFB-1)
Sensing
surface
Four bracket set
Four M5 (length: 18 mm 0.709 in)
hexagon-socket-head bolts are
attached.
SF4B
ORDER GUIDE
M8 mounting bracket
Pitch adapter bracket
M8 pitch adapter bracket
Dead zoneless mounting bracket
• MS-SFB-1-T
• MS-SFB-4
• MS-SFB-4-T
• MS-SFB-3
M5 (length: 18 mm 0.709 in)
hexagon-socket-head bolt
(Accessory for MS-SFB-1-T)
M8 mounting
bracket
MS-SFB-1-T
M5 (length: 18 mm 0.709 in)
hexagon-socket-head bolt
(Accessory for MS-SFB-4)
Pitch adapter
bracket
MS-SFB-4
M8 pitch adapter bracket
MS-SFB-4-T
M5 (length: 18 mm 0.709 in)
hexagon-socket-head bolt
(Accessory for MS-SFB-4-T)
Dead zoneless mounting bracket MS-SFB-3
Spacer (Accessory for MS-SFB-3)
Light
curtain
Sensing
surface
Four bracket set
Four M5 (length: 18 mm 0.709 in)
hexagon-socket-head bolts are
attached.
Standard L mounting bracket
(For SF4B-□G)
• MS-SF4BG-1
M5 (length: 10 mm 0.394 in)
hexagon-socket-head bolt (Accessory)
M5 mounting hole
Standard L
mounting bracket
(MS-SF4BG-1)
Light
curtain
Light
curtain
Sensing
surface
Sensing
surface
Four bracket set
Four M5 (length: 18 mm 0.709 in)
hexagon-socket-head bolts are
attached.
Four bracket set
Four M5 (length: 18 mm 0.709 in)
hexagon-socket-head bolts are
attached.
M5 (length: 25 mm 0.984 in)
hexagon-socket-head bolt
(Accessory for MS-SFB-3)
Light
curtain
Sensing
surface
Four bracket set
Four M5 (length: 25 mm 0.984 in)
hexagon-socket-head bolts and
four spacers are attached.
Dead zoneless mounting bracket
(For SF4B-□G)
• MS-SF4BG-3
When using M5 hexagonsocket-head bolt
(Rear mounting)
M5 hexagonsocket-head bolt
(Parchase separately.)
When using M8 hexagon bolt
(Rear mounting)
M8 hexagon bolt
(Parchase separately.)
M8 mounting hole
(For mounting in center)
Light
curtain
Four bracket set
Eight M5 (length: 10 mm 0.394 in)
hexagon-socket-head bolts are attached.
Light curtain
Dead zoneless supporting bracket
Accessory for dead zoneless
mounting bracket
Dead zoneless mounting bracket
MS-SF4BG-3
Light curtain
Dead zoneless supporting bracket
Accessory for dead zoneless
mounting bracket
Dead zoneless mounting bracket
MS-SF4BG-3
Four bracket set
Twelve M5 (length: 8 mm 0.315 in) hexagon-socket-head bolts
and four nut slots are attached.
15
SF4B
ORDER GUIDE
3
4
5
6
Discrete wire
Bottom cap cable
Connector
3
For emitter
With connectors on both ends
For receiver
Discrete
wire
With connectors on both ends With connector
Connector
on one end
For receiver For emitter
3
Exclusive
mating
cable for
SF-C14EX
Adapter cable
3
Model No.
SFB-CCB3
SFB-CCB7
SFB-CCB10
SFB-CCB15
With
connector
on one end
Extension cable
Bottom cap cable
5
Extension cable
6
Appearance
Cable for series
7 connection
Muting control components (12-core cable, with interference prevention wire)
4
Standard components (8-core cable)
Type
7 Mating cable / Extension cable / Cables for series connection Mating cable is not supplied with the light curtain. Be sure to order it separately.
For SF4-AH□
(PNP type)
For SF4-AH□-N
(NPN type)
For SF2-EH□
(PNP type)
For SF2-EH□-N
(NPN type)
SFB-CB05
SFB-CB5
SFB-CB10
SFB-CC3
SFB-CC10
SFB-CCJ3E
SFB-CCJ10E
SFB-CCJ3D
SFB-CCJ10D
SFB-CCB3-MU
SFB-CCB7-MU
SFB-CB05-MU
Description
Length: 3 m 9.843 ft
Net weight: 370 g approx. (2 cables)
Length: 7 m 22.966 ft
Net weight: 820 g approx. (2 cables)
Length: 10 m 32.808 ft
Net weight: 1,160 g approx. (2 cables)
Length: 15 m 49.213 ft
Net weight: 1,710 g approx. (2 cables)
Length: 0.5 m 1.640 ft
Net weight: 95 g approx. (2 cables)
Length: 5 m 16.404 ft
Net weight: 620 g approx. (2 cables)
Length: 10 m 32.808 ft
Net weight: 1,200 g approx. (2 cables)
Length: 3 m 9.843 ft
Net weight: 380 g approx. (2 cables)
Length: 10 m 32.808 ft
Net weight: 1,200 g approx. (2 cables)
Length: 3 m 9.843 ft
Net weight: 190 g approx. (1 cables)
Length: 10 m 32.808 ft
Net weight: 580 g approx. (1 cable)
Length: 3 m 9.843 ft
Net weight: 210 g approx. (1 cables)
Length: 10 m 32.808 ft
Net weight: 600 g approx. (1 cable)
Length: 3 m 9.843 ft
Net weight: 420 g approx. (2 cables)
Length: 7 m 22.966 ft
Net weight: 930 g approx. (2 cables)
SFB-CB05-A-P
SFB-CB05-A-N
SFB-CB05-B-P
SFB-CB05-B-N
Used for connecting to the light curtain and to an extension
cable or the SF-C11 control unit.
Two cables per set for emitter and receiver
Connector outer diameter: ø14 mm ø0.551 in max.
Used for cable extension or connecting to the SF-C13 control
unit.
Two cables per set for emitter and receiver
Connector outer diameter: ø14 mm ø0.551 in max.
Used for cable extension or connecting to the SF-C11 and
the SF-C14EX control unit.
One each for emitter and receiver
Connector outer diameter: ø14 mm ø0.551 in max.
Connector color: Gray (for emitter), Black (for receiver)
Connector outer diameter: ø14 mm ø0.551 in max.
Used for connecting to the light curtain and to other cables or
the SF-C13 control unit.
Two cables per set for emitter and receiver
Used for connecting to the light curtain and to an extension
Length: 0.5 m 1.640 ft
cable or the SF-C12 control unit.
Net weight:
Two cables per set for emitter and receiver
110 g approx. (2 cables)
Connector outer diameter: ø16 mm ø0.630 in max.
Length: 3 m 9.843 ft
Net weight: 430 g approx. (2 cables)
Length: 7 m 22.966 ft
SFB-CC7-MU
Net weight: 1,000 g approx. (2 cables)
Length: 10 m 32.808 ft
SFB-CC10-MU
Net weight: 1,300 g approx. (2 cables)
Length: 3 m 9.843 ft
SFB-CCJ3E-MU Net weight: 190 g approx. (1 cables)
Length: 10 m 32.808 ft
SFB-CCJ10E-MU Net weight: 660 g approx. (1 cable)
Length: 3 m 9.843 ft
SFB-CCJ3D-MU Net weight: 210 g approx. (1 cables)
Length: 10 m 32.808 ft
SFB-CCJ10D-MU Net weight: 680 g approx. (1 cable)
Length: 0.1 m 0.328 ft
SFB-CSL01
Net weight: 45 g approx. (2 cables)
Length: 0.5 m 1.640 ft
SFB-CSL05
Net weight: 95 g approx. (2 cables)
Length: 1 m 3.281 ft
SFB-CSL1
Net weight: 150 g approx. (2 cables)
Length: 5 m 16.404 ft
SFB-CSL5
Net weight: 630 g approx. (2 cables)
Length: 0.5 m 1.640 ft
SFB-CB05-EX
Net weight: 95 g approx. (2 cables)
Length: 5 m 16.404 ft
SFB-CB5-EX
Net weight: 620 g approx. (2 cables)
Length: 10 m 32.808 ft
SFB-CB10-EX
Net weight: 1,200 g approx. (2 cables)
SFB-CC3-MU
Used for connecting to the light curtain and to other cables or
the SF-C13 control unit.
Two cables per set for emitter and receiver
Used for connecting to an extension cable or the SF-C13
control unit.
Two cables per set for emitter and receiver
Connector outer diameter: ø16 mm ø0.630 in max.
Used for connecting to an extension cable or the SF-C12
control unit.
One each for emitter and receiver
Connector color: Gray (for emitter), Black (for receiver)
Connector outer diameter: ø16 mm ø0.630 in max.
Used to connect light curtains in series
Two cables per set for emitter and receiver (common for
emitter and receiver)
Cable color: Gray (common for emitter and receiver)
Used for connecting to the light curtain and to SF-C14EX
control unit or 8-core extension cable with connectors on
both ends
Two cables per set for emitter and receiver
Connector outer diameter: ø14 mm ø0.551 in max.
8-core bottom cap cable specifications. Used to allow
connector cables connected to previous light curtains (at the
control circuit side) to be smoothly adapted to the SF4B series.
Length: 0.5 m 1.640 ft
Also, SFB-CB05-A-P and SFB-CB05-A-N are usable even
Net weight:
when external device input is not used as the polarity of PNP
110 g approx. (2 cables)
output or NPN output is fixed.
Two cables per set for emitter and receiver
Connector outer diameter: ø14 mm ø0.551 in max.
Note: Where the cable color has not been specified precisely, it is black for emitter, gray with black line for receiver, outer diameter is ø6 mm ø0.236 in, min.
bending radius is R6 mm R0.236 in.
For details of mating cable of CC-Link Safety system remote I/O unit with connectors for light curtain SF-CL1T264T, refer to website.
16
SF4B
ORDER GUIDE
Intermediate supporting bracket
Spare parts (Accessories for light curtain)
Designation
Model No.
Description
Intermediate
supporting
bracket (Note 1)
MS-SFB-2
Used to mount the light curtain on the intermediate position.
(2 pcs. per set for emitter and receiver)
Mounting is possible behind or at the side of the light curtain.
Intermediate
supporting
bracket (Note 2)
(For SF4B-□G)
MS-SF4BG-2
Used to mount the light curtain in the intermediate position.
(2 pcs. per set for emitter and receiver)
Mounting is possible behind or at the side of the light curtain.
Test rod ø14
SF4B-TR14
Min. sensing object for regular checking (ø14 mm ø0.551 in), with
finger protection type (min. sensing object ø14 mm ø0.551 in)
Test rod ø25
SF4B-TR25
Min. sensing object for regular checking (ø25 mm ø0.984 in), with
hand protection type (min. sensing object ø25 mm ø0.984 in)
Notes: 1) T
he number of sets required varies depending on the product.
1 set: SF4B-F□.............................. Light curtain with 79 to 111 beam channels
SF4B-H□.............................. Light curtain with 40 to 56 beam channels
SF4B-A□.............................. Light curtain with 20 to 28 beam channels
2 sets: SF4B-F127□
SF4B-H□.............................. Light curtain with 64 to 80 beam channels
SF4B-A□.............................. Light curtain with 32 to 40 beam channels
3 sets: SF4B-H□.............................. Light curtain with 88 to 96 beam channels
SF4B-A□.............................. Light curtain with 44 to 48 beam channels
2) The number of sets required varies depending on the product.
1 set: SF4B-F□G........................... Light curtain with 79 to 127 beam channels
SF4B-H□G........................... Light curtain with 40 to 64 beam channels
SF4B-A□G........................... Light curtain with 20 to 32 beam channels
2 set: SF4B-H□G........................... Light curtain with 72 to 96 beam channels
SF4B-A□G........................... Light curtain with 36 to 48 beam channels
• MS-SFB-2
Light curtain
Intermediate supporting
bracket
MS-SFB-2
M5 hexagonsocket-head bolt
Purchase
separately.
Sensing surface
M5 hexagonsocket-head bolt
Purchase
separately.
Intermediate supporting
bracket
MS-SFB-2
Light curtain
Sensing surface
• MS-SF4BG-2
M5 hexagonsocket
-head bolt
Purchase
separately.
(
)
Material: SPCC
M5 hexagonsocket
-head bolt
Purchase
separately.
(
)
Material: SPCC
17
SF4B
OPTIONS
Exclusive control units
Designation
Appearance
Model No.
Application cable
Description
Connector
connection type
control unit
SF-C11
Use 8-core cable with connector to connect to the light
curtain.
Bottom cap cable: SFB-CB□
Compatible with up to Control Category 4.
Extension cable:
SFB-CCJ10□ Interference prevention wires and muting function cannot
be used.
Robust type
control unit
SF-C12
Bottom cap cable:
SFB-CB05-MU
Extension cable:
SFB-CCJ10□-MU
Use 12-core cable with connector to connect to the light
curtain. Interference prevention wires can be used.
Compatible with up to Control Category 4.
Muting function cannot be used.
Slim type
control unit
SF-C13
Bottom cap cable:
SFB-CCB□(-MU)
Extension cable:
SFB-CC□(-MU)
Use a discrete wire cable to connect to the light curtain.
Muting function and interference prevention wires can be
used.
Compatible with up to Control Category 4.
Application
expansion unit
for SF4B series
SF-C14EX
Bottom cap cable:
SFB-CB□-EX
Extension cable:
SFB-CCJ10□
The muting control function and emergency stop input
expand the applications of the light curtains.
Use exclusive cable to connect to the light curtain.
Compatible with up to Control Category 4.
The handy-controller SFB-HC cannot be used with
SF‑C14EX‑01.
Bottom cap cable:
SFB-CB□-CL
Extension cable:
SFB-CCJ10□-CL
This is a remote I/O unit that allows the safety field network
“CC-Link Safety” to be connected to the light curtains or the
safety components.
Use exclusive cable to connect to the light curtain.
Compatible with up to Control Category 4.
Please contact our office for details.
Handy-controller
non-compatible
type
CC-Link Safety
system
remote I/O unit
for light curtain
(Note)
SF-C14EX-01
SF-CL1T264T
Note: Refer to the our website for details of the remote I/O unit SF-CL1T264T.
SF-C12 spare relay set
A set of spare relays (2 safety relays and 1 removal tool) is available for the safety relay that is built into the SF-C12.
Model No.: SF-C12-RY
●Recommended safety relay
Safety relay
Panasonic Corporation
SF series
Safety relay
SFS3-L-DC24V (AG1S132)
SFS4-L-DC24V (AG1S142)
DIN terminal block
SFS4-SFD (AG1S847)
Note: Contact Panasonic Corporation for details on the
recommended products.
18
Item
Type
Model No.
Contact arrangement
Rated nominal
switching capacity
Min. switching capacity
Coil rating
Rated power
consumption
Operation time
Release time
Ambient temperature
Applicable standards
With LED indicator
SFS3-L-DC24V
SFS4-L-DC24V
3a1b
4a2b
6 A / 250 V AC, 6 A / 30 V DC
1 mA / 5 V DC
15 mA / 24 V DC
20.8 mA / 24 V DC
360 mW
500 mW
20 ms or less
20 ms or less
-40 to +85 °C -40 to +185 °F (Humidity: 5 to 85 % RH)
UL, C-UL, TÜV
SF4B
OPTIONS
Handy-controller
Designation
Appearance
Model No.
Pigtailed type
In case of 8-core
Bottom cap cable
(Note)
Extension cable
8-core
Fix
ed
Floa bla
ting nki
Aux blan ng
Lig iliary king
ht out
con
em put
trol issi
on
Handycontroller
Co
de
Mo
nit
Pr or
ote
Co ct
FU
py
NC
TIO
N
CA
NC
SFB-HC
In case of 12-core
FUNCTION
12-core → 8-core
EL
EN
8-core
TE
R
8-core → 12-core
CANCEL
Bottom cap
cable (Note)
* Includes 2 adapter cables
Cable set for
cable type
connection
SFC-WNC1
Note: A handy-controller cannot be used with the SF4B-□-01, the
SF4B-□-03 and the SF-C14EX-01.
Adapter cable
(Accessory)
ENTER
Handy-controller
Adapter cable
(Accessory)
Extension cable
Note: If using a bottom cap cable with discrete wire, please order the
SFB-CC3/CC10 separately. Refer to the instruction manual for the
light curtain for details on wiring.
Cable type
Cable set
+V 0V
Synchronization Not used
Control
circuit
Synchronization +
FUNCTION
CANCEL
Terminal
block
ENTER
Handy-controller
Light curtain diagnosis software
Simply input the error number of the light curtain on the screen, and the section of maintenance needed will be located
and coping process will be displayed.
* Free download aviable from our website.
Light curtain diagnosis software
Y-shaped connector
Type
Appearance
Wire-saving
Y-shaped
connector
Model No.
Description
SFB-WY1
Wire-saving connector for standard components (8-core cable). Cables of
emitter and receiver are consolidated into one cable for wire-saving.
Wiring has +24 V, 0 V, OSSD 1, OSSD 2, output polarity setting wire (shield).
Power wire and synchronization wire are connected inside the connector.
Interlock is disabled (automatic reset).
WY1-CCN3
Cable with
connector
on one side
WY1-CCN10
Cable length: 3 m 9.843 ft
Net weight: 200 g approx.
(1 cable)
Mating cable for Y-shaped connector
Cable color: Gray (with black line)
Connector color: Black
Cable length: 10 m 32.808 ft
The min. bending radius: R6 mm R0.236 in
Net weight: 620 g approx.
(1 cable)
By using the Y-shaped connector, the least required wires such as power or safety output are consolidated into one cable. Man-hours taken
for wiring is eliminated to the minimum. Construction times as well as wiring mistakes are greatly reduced.
Previous
A total of 16 wires
Y-shaped connector
SF4B series
SF4B series
Only 5 wires
Less wiring mistakes! Reduced wiring time!
Easy wiring to Safety PLC, etc.
Y-shapcd connector
8 wires
5 wires
8 wires
Safety PLC / Remote I/O
Safety relay unit SF-C13
Safety PLC / Remote I/O
Safety relay unit SF-C13
19
SF4B
OPTIONS
Product configuration
Emitter
Receiver
Extension cable
(1 cable for receiver)
Extension cable
SFB-CCJ3D (3 m 9.843 ft)
SFB-CCJ10D (10 m 32.808 ft)
Y-shaped connector
SFB-WY1
Extension cable
(1 cable for emitter)
Bottom cap cable
(2 cables for emitter and
receiver)
SFB-CCJ3D (3 m 9.843 ft)
SFB-CCJ10D (10 m 32.808 ft)
WY1-CCN3 (3 m 9.843 ft)
WY1-CCN10 (10 m 32.808 ft)
SFB-CCJ3E (3 m 9.843 ft)
SFB-CCJ10E (10 m 32.808 ft)
SFB-CB05 (0.5 m 1.64 ft)
SFB-CB5 (5 m 16.404 ft)
SFB-CB10 (10 m 32.808 ft)
Cable with connector on one side
(Common for all models)
Connector
pin No.
Connector pin layout
Black connector
2
1
8
3
Receiver
7
Emitter
6
4
5
Gray connector
Description
1
OSSD 2
2
+24 V
3
OSSD 1
4
Not used
5
Not used
6
Not used
7
0V
8
Output polarity setting wire (Shield)
Wiring diagram of control unit SF-C13
• Connect the light curtain control outputs OSSD 1 and OSSD 2 to S1 and
S2 respectively.
• Connect the light curtain control outputs OSSD 1 and
OSSD 2 to S4 and S2 respectively and ground the + side.
Light curtain
(SF4B series)
Light curtain
(SF4B series)
Y-shaped connector
WY1-CCN□
+24 V DC
+24 V DC
Not used (Yellow-green)
+24 V (Brown)
Y-shaped connector
WY1-CCN□
Not used (Yellow-green)
+24 V (Brown)
Large multi-purpose indicator input 1 (Gray)
0V
(Blue)
Large multi-purpose indicator input 1 (Gray)
Large multi-purpose indicator input 2 (Gray / Black)
Output
polarity
setting wire
(Shield)
OSSD 2 (White)
OSSD 1 (Black)
OSSD 2 (White)
A1
S1
OSSD 1 (Black)
L1
RESET
(Note 1)
(Note 1) FUSE1
FUSE2
(Note 2)
S2 S3 S4 X1 X2 X3
13 23 33 41
F
Ui
Large multi-purpose indicator input 2 (Gray / Black)
Output
polarity
setting wire 0 V
(Shield)
(Blue)
(Note 1) FUSE1
A1
F.G.
K1
S1
S2 S3 S4
X1
X2
F
Ui
SF-C13 control circuit
A2
0V
INTER_LOCK
AUX
KA, KB: Force-guided relay
F.G.
or magnet contactor
KA
N
34 42
L1L2L3
33 41
SF-C13 control circuit
KB
OUT
KB
KA
M
3~
Notes: 1) The above diagram is when using manual reset. If automatic reset
is used, disconnect the lead from X2 and connect it to X3.
In this case, a reset (RESET) button is not needed.
2) Use a momentary-type switch as the reset (RESET) button.
3) Unused wires must be insulated.
20
FUSE2
RESET
(Note 1)
(Note 2)
K2
FAULT
14 24
X3 13 23
K1
K2
OUT
L1
A2
0V
INTER_LOCK
FAULT
14 24 34 42
AUX
KA, KB: Force-guided relay
KB
or magnet contactor KA
N
L1L2L3
KB
KA
M
3~
Notes: 1) T
he above diagram is when using manual reset. If automatic reset
is used, disconnect the lead from X2 and connect it to X3.
In this case, a reset (RESET) button is not needed.
2) Use a momentary-type switch as the reset (RESET) button.
3) Unused wires must be insulated.
SF4B
OPTIONS
Front protection cover (Except for SF4B-□G) / Protection bar set (Except for SF4B-□G) / Corner mirror
Designation
Applicable
beam channels
Front protection
cover
Protection bar set
Rear / side
protection bar set
Corner mirror
Finger
Hand
Arm / Foot
Model No.
Model No.
Model No.
Model No.
23
12
6
Effective reflective surface
31
16
8
39
20
10
47
24
12
55
28
14
63
32
16
71
36
18
79
40
20
95
48
24
111
56
28
127
64
32
–
72
36
–
80
40
–
88
44
–
96
48
FC-SFBH-12
FC-SFBH-16
FC-SFBH-20
FC-SFBH-24
FC-SFBH-28
FC-SFBH-32
FC-SFBH-36
FC-SFBH-40
FC-SFBH-48
FC-SFBH-56
FC-SFBH-64
FC-SFBH-72
FC-SFBH-80
FC-SFBH-88
FC-SFBH-96
MC-SFBH-12
MC-SFBH-16
MC-SFBH-20
MC-SFBH-24
MC-SFBH-28
MC-SFBH-32
MC-SFBH-36
MC-SFBH-40
MC-SFBH-48
MC-SFBH-56
MC-SFBH-64
MC-SFBH-72
MC-SFBH-80
MC-SFBH-88
MC-SFBH-96
MC-SFBH-12-T
MC-SFBH-16-T
MC-SFBH-20-T
MC-SFBH-24-T
MC-SFBH-28-T
MC-SFBH-32-T
MC-SFBH-36-T
MC-SFBH-40-T
MC-SFBH-48-T
MC-SFBH-56-T
MC-SFBH-64-T
MC-SFBH-72-T
MC-SFBH-80-T
MC-SFBH-88-T
MC-SFBH-96-T
RF-SFBH-12
RF-SFBH-16
RF-SFBH-20
RF-SFBH-24
RF-SFBH-28
RF-SFBH-32
RF-SFBH-36
RF-SFBH-40
RF-SFBH-48
RF-SFBH-56
RF-SFBH-64
RF-SFBH-72
RF-SFBH-80
RF-SFBH-88
RF-SFBH-96
236 × 72 mm 9.291 × 2.835 in
316 × 72 mm 12.441 × 2.835 in
396 × 72 mm 15.591 × 2.835 in
476 × 72 mm 18.740 × 2.835 in
556 × 72 mm 21.890 × 2.835 in
636 × 72 mm 25.039 × 2.835 in
716 × 72 mm 28.189 × 2.835 in
796 × 72 mm 31.339 × 2.835 in
956 × 72 mm 37.638 × 2.835 in
1,116 × 72 mm 43.937 × 2.835 in
1,276 × 72 mm 50.236 × 2.835 in
1,436 × 72 mm 56.535 × 2.835 in
1,596 × 72 mm 62.835 × 2.835 in
1,756 × 72 mm 69.134 × 2.835 in
1,916 × 72 mm 75.433 × 2.835 in
Note: The model Nos. given above denote a single unit, not a pair of units. 2 units are required for use in mounting to the emitter / receiver. (Except for corner mirror)
Front protection cover
Protection bar set
Front protection
cover
• FC-SFBH-□
Rear / side protection bar set
• MC-SFBH-□
* It is not available for SF4B-□G.
Protects sensing surface of the light
curtain from flying objects such as
welding spatter.
The operating range reduces when
the front protection cover is used.
M5 hexagonsocket-head bolt
with washers
• MC-SFBH-□-T
* It is not available for SF4B-□G.
M5 hexagonsocket-head bolt
Note: It is not available for SF4B-□G.
Material: Polycarbonate
Protection bar
mounting
bracket
M5 hexagonsocket-head bolt
Sensing range
Light curtain
SF4B-H□
SF4B-A□
SF4B-F□ 12 to 64 beam 72 to 96 beam 6 to 32 beam 36 to 48 beam
channels type channels type channels type channels type
0.3 to 6 m
Only emitter installed 0.984 to 19.685 ft
0.3 to 6 m
Only receiver installed 0.984 to 19.685 ft
0.3 to 5.5 m
Both emitter and receiver installed 0.984 to 18.045 ft
0.3 to 7.5 m
0.984 to 24.606 ft
0.3 to 7.5 m
0.984 to 24.606 ft
0.3 to 7 m
0.984 to 22.966 ft
0.3 to 6 m
0.984 to 19.685 ft
0.3 to 6 m
0.984 to 19.685 ft
0.3 to 5.5 m
0.984 to 18.045 ft
0.3 to 7.5 m
0.984 to 24.606 ft
0.3 to 7.5 m
0.984 to 24.606 ft
0.3 to 7 m
0.984 to 22.966 ft
0.3 to 6 m
0.984 to 19.685 ft
0.3 to 6 m
0.984 to 19.685 ft
0.3 to 5.5 m
0.984 to 18.045 ft
Protection bar
intermediate
supporting bracket
MS-SFB-6 (Optional)
(Note 2)
Protection
bar
M5 hexagonsocket-head bolt
Note: The operating range is the possible setting distance between the emitter and the
receiver.
Corner mirror
M5 hexagonsocket-head bolt
• RF-SFBH-□
• Parts List
Normally for L-shaped or U-shaped installation,
2 or 3 sets of light curtains are needed. With the
use of a corner mirror reflecting the light, one set of
light curtain is possible for L-shaped or U-shaped
installation.
Designation
Protection bar
MC-SFBH-□
Number
Remarks
MC-SFBH-□-T
Number
Remarks
1 pc. Material: Aluminum 1 pc. Material: Aluminum
1 pc. each Material: Iron
Protection bar mounting bracket 1 pc. Material:
(For left side, for right side) each Die-cast zinc alloy (Note 1) (Trivalent chrome plated)
Hexagon-socket-head
M5
M5
2 pcs.
2 pcs.
(length: 20 mm 0.787 in)
(length: 20 mm 0.787 in)
bolt with washers
Percent decline of the sensing range
Corner mirror
RF-SFBH-□
With 1 mirror
Declined to 90 %
With 2 mirrors Declined to 80 %
Hexagon-socket-head bolt 2 pcs.
M5
M5
2 pcs.
(length: 16 mm 0.630 in)
(length: 18 mm 0.709 in)
Protection bar intermediate
supporting bracket
MS-SFB-6
(Optional) (Note 2)
Material: Iron
Trivalent
chrome plated
1 pc.
1 pc.
Material: Iron
Trivalent
chrome plated
Notes: 1) A
vailable as a spare part. Model No.: MS-MCSFB-1-T
2) T
he protection bar intermediate supporting bracket MS-SFB-6
(optional) is installed to protection bars that are longer than the
MC-SFBH-48(-T). Use if there is much flexure bending in the
protection bar. Please contact our office for details.
21
SF4B
OPTIONS
Front protection cover (For SF4B-□G)
Designation
Applicable
beam channels
Front protection cover
Front protection
cover
Finger
Hand
Arm / Foot
Model No.
23
12
6
31
16
8
39
20
10
47
24
12
55
28
14
63
32
16
71
36
18
79
40
20
95
48
24
111
56
28
127
64
32
–
72
36
–
80
40
–
88
44
–
96
48
FC-SF4BG-H12
FC-SF4BG-H16
FC-SF4BG-H20
FC-SF4BG-H24
FC-SF4BG-H28
FC-SF4BG-H32
FC-SF4BG-H36
FC-SF4BG-H40
FC-SF4BG-H48
FC-SF4BG-H56
FC-SF4BG-H64
FC-SF4BG-H72
FC-SF4BG-H80
FC-SF4BG-H88
FC-SF4BG-H96
Note: The model Nos. given above denote a single unit,
not a pair of units. 2 units are required for use in
mounting to the emitter / receiver.
Designation
Side stopper
(Accessory for a front protection cover)
Bottom stopper
Accessory for a
front protection cover
Bottom cap cable
Material: Front protection cover ... Polycarbonate
Top / Side / Bottom stopper ... Stainless steel (SUS304)
Sensing range
SF4B-H□G
SF4B-A□G
SF4B-F□G 12 to 64 beam 72 to 96 beam 6 to 32 beam 36 to 48 beam
channels type channels type channels type channels type
Only emitter installed
Only receiver installed
Note: The operating range is the possible setting distance between the emitter and the receiver.
Description
Test rod ø45
SF4B-TR45
Min. sensing object for regular checking (ø45 mm ø1.772 in),
with arm / foot protection type (min. sensing object ø45 mm ø1.772 in)
Laser alignment
tool
SF-LAT-2N
Allows easy beam axis alignment using easy-to-see laser beam
Laser alignment tool
(For SF4B-□G)
SF-LAT-4BG Allows easy beam axis alignment using easy-to-see laser beam
Caution tape
SF-TP-BG10
• SF-LAT-2N
Attached to the side of the light curtain to alert workers to hazards
(10 m 32.8 ft long)
Laser alignment tool
(For SF4B-□G)
• SF-LAT-4BG
* Illustration shows standard
type light curtain.
22
0.3 to 6 m
0.3 to 7.5 m
0.3 to 6 m
0.3 to 7.5 m
0.3 to 6 m
0.984 to 19.685 ft 0.984 to 24.606 ft 0.984 to 19.685 ft 0.984 to 24.606 ft 0.984 to 19.685 ft
0.3 to 5.5 m
0.3 to 7 m
0.3 to 5.5 m
0.3 to 7 m
0.3 to 5.5 m
Both emitter and receiver installed 0.984 to 18.045 ft 0.984 to 22.966 ft 0.984 to 18.045 ft 0.984 to 22.966 ft 0.984 to 18.045 ft
Model No.
Laser alignment tool
Top stopper
(Accessory for a front protection cover)
Caution tape
• SF-TP-BG10
SF4B
OPTIONS
Designation
Model No.
Large display unit for light curtain
Description
• SF-IND-2
With the auxiliary output of the light curtain, the operation is easily
observable from various directions.
Specifications
• Supply voltage: 24 V DC ±15 %
• Current consumption: 12 mA or less
• Indicators: Orange LED (8 pcs. used)
[Light up when external contact is ON]
• Ambient temperature: –10 to +55 °C +14 to +131 °F
(No dew condensation or icing allowed)
• Material: POM (Enclosure)
Polycarbonate (Cover)
Cold rolled carbon steel (SPCC) (Bracket)
• Cable: 0.3 mm2 2-core cabtyre cable, 3 m 9.843 ft long
• Weight: 70 g approx. (including bracket)
I/O circuit diagrams
Large display
unit for
light curtain
Color code
(Brown) +V
SF-IND-2
Attaches to top of light curtain.
Tighten together the mounting bracket
provided with the light curtain MS-SFB-1/4,
MS-SFBG-1 and the attached mounting
bracket of SF-IND-2.
*1
Non-voltage contact or
NPN open-collector transistor
+ 24 V DC
– ±15 %
Internal circuit
M5 hexagon-sockethead bolt
(length: 10 mm
0.394 in or more)
Purchase
separately.
or
(Blue) – V
*1
Users’ circuit
Color code
(Brown) +V
*1
*1
Non-voltage contact or
PNP open-collector transistor
+ 24 V DC
– ±15 %
or
(Blue) – V
Internal circuit
Users’ circuit
Introduction to sensors that can be used as muting sensors
Compact Photoelectric Sencer
Ultra-slim Photoelectric Sensor
U-shaped Micro Photoelectric Sensor
Rectangular-shaped Inductive Proximity Sensor
• World standard size
• Wide variation
• 3.5 mm 0.138 in thickness
• Long sensing range:1 m 3.281 ft
(thru-beam type:EX-19)
*The EX-20 series that is compatible with
M3 mounting screws is also available.
• Extremely compact and space
saving
• A lineup of quick fitting-up
connector type
• Industry longest in stable
sensing range
• 10 times the durability
(Compared to previous models)
• IP68g protective construction
CX-400 Ver.2 SERIES
EX-10 Ver.2 SERIES
PM-64 SERIES
GX-F/H SERIES
* Check the specifications for the muting sensors before making a selection. Refer to “PRECAUTIONS FOR USE” (p.35~) for details on
specifications and installation conditions.
●Recommended muting lamps
Manufactured by Maruyasu Dengyo Co.,Ltd.
Model No.: BLR-30O-C
Manufactured by IDEC Corporation
Model No.: HW1P-5Q7A
Note: Contact the manufacturers for details on the recommended products.
●Recommended safety relays
Manufactured by Panasonic Corporation
Model No.: SF series (Safety Relay)
Note: Contact the manufacturers for details on the
recommended products.
23
SF4B
SPECIFICATIONS
Light curtain individual specifications
SF4B-F□(G)
Type
Item
Min. sensing object ø14 mm ø0.551 in type (10 mm 0.394 in beam pitch)
Model No. (Note 2) SF4B-F23□ SF4B-F23□G SF4B-F31□ SF4B-F31□G SF4B-F39□ SF4B-F39□G SF4B-F47□ SF4B-F47□G SF4B-F55□ SF4B-F55□G
No. of beam channels
23
31
230 mm
9.055 in
Protective height
244 mm
9.606 in
Current consumption
310 mm
12.205 in
39
324 mm
12.756 in
47
404 mm
15.906 in
2.56×10–9
2.96×10–9
MTTFd
470 mm
18.504 in
55
484 mm
19.055 in
550 mm
21.654 in
564 mm
22.205 in
Emitter: 100 mA or less, Receiver: 160 mA or less
Emitter: 80 mA or less, Receiver: 120 mA or less
PFHd
3.36×10–9
3.75×10–9
4.15×10–9
100 years or more
Net weight (Total of emitter and receiver)
Type
Item
390 mm
15.354 in
510 g
approx.
980 g
approx.
660 g
approx.
1,340 g
approx.
810 g
approx.
1,700 g
approx.
960 g
approx.
2,000 g
approx.
1,100 g
approx.
2,400 g
approx.
Min. sensing object ø14 mm ø0.551 in type (10 mm 0.394 in beam pitch)
Model No. (Note 2) SF4B-F63□ SF4B-F63□G SF4B-F71□ SF4B-F71□G SF4B-F79□ SF4B-F79□G SF4B-F95□〉 SF4B-F95□G
No. of beam channels
63
630 mm
24.803 in
Protective height
Current consumption
71
644 mm
25.354 in
710 mm
27.953 in
79
724 mm
28.504 in
790 mm
31.102 in
95
804 mm
31.654 in
950 mm
37.402 in
964 mm
37.953 in
Emitter: 100 mA or less, Receiver: 160 mA or less Emitter: 115 mA or less, Receiver: 190 mA or less
PFHd
4.95×10–9
4.55×10–9
MTTFd
5.35×10–9
6.15×10–9
100 years or more
Net weight (Total of emitter and receiver)
1,260 g
approx.
2,800 g
approx.
1,420 g
approx.
3,200 g
approx.
1,570 g
approx.
3,400 g
approx.
1,870 g
approx.
4,200 g
approx.
Type Min. sensing object ø14 mm ø0.551 in type (10 mm 0.394 in beam pitch)
Item
Model No. (Note 2) SF4B-F111□ SF4B-F111□G SF4B-F127□ SF4B-F127□G
No. of beam channels
111
1,110 mm
43.701 in
Protective height
Current consumption
127
1,124 mm
44.252 in
1,270 mm
50.000 in
1,284 mm
50.551 in
Emitter: 135 mA or less, Receiver: 230 mA or less
PFHd
6.94×10–9
MTTFd
7.74×10–9
100 years or more
Net weight (Total of emitter and receiver)
2,170 g
approx.
5,000 g
approx.
2,470 g
approx.
5,600 g
approx.
Notes: 1) W
here measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F. The model No. with “G“ is a robust type.
2) The models with the “-01” or “-03” cannot be used with the handy-controller SFB-HC.
SF4B-H□(G)
Type
Item
Min. sensing object ø25 mm ø0.984 in type (20 mm 0.787 in beam pitch)
Model No. (Note 2) SF4B-H12□ SF4B-H12□G SF4B-H16□ SF4B-H16□G SF4B-H20□ SF4B-H20□G SF4B-H24□ SF4B-H24□G SF4B-H28□ SF4B-H28□G
No. of beam channels
12
230 mm
9.055 in
Protective height
16
244 mm
9.606 in
Current consumption
310 mm
12.205 in
20
324 mm
12.756 in
2.01×10–9
2.21×10–9
MTTFd
470 mm
18.504 in
28
484 mm
19.055 in
550 mm
21.654 in
564 mm
22.205 in
Emitter: 80 mA or less, Receiver: 115 mA or less
2.41×10–9
2.61×10–9
2.81×10–9
100 years or more
Net weight (Total of emitter and receiver)
510 g
approx.
980 g
approx.
Type
660 g
approx.
1,340 g
approx.
810 g
approx.
1,700 g
approx.
960 g
approx.
2,000 g
approx.
1,100 g
approx.
2,400 g
approx.
Min. sensing object ø25 mm ø0.984 in type (20 mm 0.787 in beam pitch)
Model No. (Note 2) SF4B-H32□ SF4B-H32□G SF4B-H36□ SF4B-H36□G SF4B-H40□ SF4B-H40□G SF4B-H48□ SF4B-H48□G SF4B-H56□ SF4B-H56□G
No. of beam channels
32
36
644 mm
25.354 in
Protective height
Current consumption
Emitter: 80 mA or less, Receiver: 115 mA or less
3.01×10–9
710 mm
27.953 in
40
630 mm
24.803 in
PFHd
724 mm
28.504 in
3.21×10–9
MTTFd
Net weight (Total of emitter and receiver)
24
24
404 mm
15.906 in
Emitter: 70 mA or less, Receiver: 95 mA or less
PFHd
Item
390 mm
15.354 in
790 mm
31.102 in
48
804 mm
31.654 in
950 mm
37.402 in
56
964 mm
37.953 in
Emitter: 90 mA or less, Receiver: 140 mA or less
3.41×10–9
3.80×10–9
1,110 mm
43.701 in
1,124 mm
44.252 in
Emitter: 100 mA or less,
Receiver: 160 mA or less
4.20×10–9
100 years or more
1,260 g
approx.
2,800 g
approx.
1,420 g
approx.
3,200 g
approx.
1,570 g
approx.
3,400 g
approx.
1,870 g
approx.
4,200 g
approx.
2,170 g
approx.
5,000 g
approx.
SF4B
SPECIFICATIONS
Type
Item
Min. sensing object ø25 mm ø0.984 in type (20 mm 0.787 in beam pitch)
Model No. (Note 2) SF4B-H64□ SF4B-H64□G SF4B-H72□ SF4B-H72□G SF4B-H80□ SF4B-H80□G SF4B-H88□ SF4B-H88□G SF4B-H96□ SF4B-H96□G
No. of beam channels
64
1,270 mm
50.000 in
Protective height
72
1,284 mm
50.551 in
1,430 mm
56.299 in
80
1,444 mm
56.850 in
1,590 mm
62.598 in
88
1,604 mm
63.150 in
1,750 mm
68.898 in
96
1,764 mm
69.449 in
1,910 mm
75.197 in
1,924 mm
75.748 in
Emitter: 100 mA or less,
Emitter: 110 mA or less, Receiver: 180 mA or less Emitter: 120 mA or less, Receiver: 200 mA or less
Receiver: 160 mA or less
Current consumption
PFHd
5.00×10–9
4.60×10–9
MTTFd
5.40×10–9
5.80×10–9
6.20×10–9
100 years or more
Net weight (Total of emitter and receiver)
2,470 g
approx.
5,600 g
approx.
2,770 g
approx.
6,400 g
approx.
3,070 g
approx.
7,000 g
approx.
3,370 g
approx.
7,800 g
approx.
3,670 g
approx.
8,400 g
approx.
Notes: 1) W
here measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F. The model No. with “G“ is a robust type.
2) The models with the “-01” or “-03” cannot be used with the handy-controller SFB-HC.
SF4B-A□(G)
Type
Item
Min. sensing object ø45 mm ø1.772 in type (40 mm 1.575 in beam pitch)
Model No. (Note 2) SF4B-A6□ SF4B-A6□G SF4B-A8□ SF4B-A8□G SF4B-A10□ SF4B-A10□G SF4B-A12□ SF4B-A12□G SF4B-A14□ SF4B-A14□G
6
No. of beam channels
8
230 mm
9.055 in
Protective height
244 mm
9.606 in
Current consumption
10
310 mm
12.205 in
324 mm
12.756 in
1.71×10
1.81×10
–9
–9
MTTFd
470 mm
18.504 in
14
484 mm
19.055 in
550 mm
21.654 in
564 mm
22.205 in
Emitter: 70 mA or less, Receiver: 95 mA or less
1.91×10
–9
2.01×10–9
2.11×10–9
100 years or more
Net weight (Total of emitter and receiver)
510 g
approx.
980 g
approx.
Type
660 g
approx.
1,340 g
approx.
810 g
approx.
1,700 g
approx.
960 g
approx.
2,000 g
approx.
1,100 g
approx.
2,400 g
approx.
Min. sensing object ø45 mm ø1.772 in type (40 mm 1.575 in beam pitch)
Model No. (Note 2) SF4B-A16□ SF4B-A16□G SF4B-A18□ SF4B-A18□G SF4B-A20□ SF4B-A20□G SF4B-A24□ SF4B-A24□G SF4B-A28□ SF4B-A28□G
16
No. of beam channels
18
Protective height
Current consumption
Emitter: 70 mA or less, Receiver: 95 mA or less
PFHd
644 mm
25.354 in
2.21×10–9
710 mm
27.953 in
20
630 mm
24.803 in
724 mm
28.504 in
2.31×10–9
MTTFd
790 mm
31.102 in
24
804 mm
31.654 in
950 mm
37.402 in
28
964 mm
37.953 in
Emitter: 75 mA or less, Receiver: 105 mA or less
2.41×10–9
1,110 mm
43.701 in
1,124 mm
44.252 in
Emitter: 80 mA or less,
Receiver: 120 mA or less
2.61×10–9
2.81×10–9
100 years or more
Net weight (Total of emitter and receiver)
1,260 g
approx.
2,800 g
approx.
Type
Item
12
404 mm
15.906 in
Emitter: 65 mA or less, Receiver: 85 mA or less
PFHd
Item
390 mm
15.354 in
1,420 g
approx.
3,200 g
approx.
1,570 g
approx.
3,400 g
approx.
1,870 g
approx.
4,200 g
approx.
2,170 g
approx.
5,000 g
approx.
Min. sensing object ø45 mm ø1.772 in type (40 mm 1.575 in beam pitch)
Model No. (Note 2) SF4B-A32□ SF4B-A32□G SF4B-A36□ SF4B-A36□G SF4B-A40□ SF4B-A40□G SF4B-A44□ SF4B-A44□G SF4B-A48□ SF4B-A48□G
32
No. of beam channels
Protective height
Current consumption
PFHd
1,270 mm
50.000 in
36
1,284 mm
50.551 in
1,430 mm
56.299 in
40
1,444 mm
56.850 in
1,604 mm
63.150 in
Emitter: 80 mA or less,
Emitter: 85 mA or less, Receiver: 130 mA or less
Receiver: 120 mA or less
3.01×10–9
3.21×10–9
MTTFd
Net weight (Total of emitter and receiver)
1,590 mm
62.598 in
44
3.41×10–9
1,750 mm
68.898 in
48
1,764 mm
69.449 in
1,910 mm
75.197 in
1,924 mm
75.748 in
Emitter: 95 mA or less, Receiver: 140 mA or less
3.61×10–9
3.80×10–9
100 years or more
2,470 g
approx.
5,600 g
approx.
2,770 g
approx.
6,400 g
approx.
3,070 g
approx.
7,000 g
approx.
3,370 g
approx.
7,800 g
approx.
3,670 g
approx.
8,400 g
approx.
Notes: 1) W
here measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F. The model No. with “G“ is a robust type.
2) The models with the “-01” or “-03” cannot be used with the handy-controller SFB-HC.
25
SF4B
SPECIFICATIONS
Light curtain common specifications
Type Min. sensing object ø14 mm ø0.551 in type Min. sensing object ø25 mm ø0.984 in type Min. sensing object ø45 mm ø1.772 in type
Model No.
SF4B-H□(G)
SF4B-A□(G)
SF4B-A□-01
SF4B-F□-01
SF4B-H□-01
SF4B-F□-03
SF4B-H□-03
Applicable standards (Note 2)
SFB-HC non-compatible
Item Korean press compliant (Note 3)
International standard
Japan
Europe (EU)
North America
IEC 61496-1/2 (Type 4), ISO 13849-1 (Category 4, PLe), IEC 61508-1 to 7 (SIL3)
JIS B 9704-1/2 (Type 4), JIS B 9705-1 (Category 4), JIS C 0508-1 to 7 (SIL3)
EN 61496-1 (Type 4), EN ISO 13849-1 (Category 4, PLe), EN 61508-1 to 7 (SIL3), EN 55011, EN 50178, EN 61000-6-2
ANSI/UL 61496-1/2 (Type 4), ANSI/UL 508, UL 1998 (Class 2), CAN/CSA 61496-1/2 (Type 4), CAN/CSA C22.2 No.14,
OSHA 1910.212, OSHA 1910.217(C), ANSI B11.1 to B11.19, ANSI/RIA 15.06
South Korea (S-Mark)
S1-G-35-2005, S2-W-11-2003 (SF4B-□ only)
China (GB)
Operating range (Note 3)
Min. sensing object (Note 4)
Effective aperture angle
Supply voltage
Control outputs
(OSSD 1, OSSD 2)
Operation mode
Protection circuit
Response time
Auxiliary output
(Non-safety output)
Operation mode
Protection circuit
Responce time
GB 4584 (SF4B-□, SF4B-□-01 only)
0.3 to 7 m 0.984 to 22.966 ft
ø14 mm ø0.551 in opaque object
12 to 64 beam channels type: 0.3 to 9 m 0.984 to 29.528 ft 6 to 32 beam channels type: 0.3 to 9 m 0.984 to 29.528 ft
72 to 96 beam channels type: 0.3 to 7 m 0.984 to 22.966 ft 36 to 48 beam channels type: 0.3 to 7 m 0.984 to 22.966 ft
ø25 mm ø0.984 in opaque object
ø45 mm ø1.772 in opaque object
±2.5° or less [for an operating range exceeding 3 m 9.843 ft (conforming to IEC 61496-2 / UL 61496-2)]
24 V DC ±10 % Ripple P-P 10 % or less
PNP open-collector transistor / NPN open-collector transistor (switching method)
• When selecting PNP output: Max. source current 200 mA, When selecting NPN output: Max. sink current 200 mA
• Applied voltage: same as supply voltage When selecting PNP output: between the control output and +V,
When selecting NPN output: between the control output and 0 V
• Residual voltage: 2.5 V or less (When selecting PNP output: source current 200 mA, when selecting NPN output: sink current 200 mA)
(when using 20 m 65.617 ft length cable)
ON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the light curtain or the synchronization signal)(Note 5,6)
Incorporated
OFF response: 14 ms or less, ON response: 80 to 90 ms
PNP open-collector transistor / NPN open-collector transistor (switching method)
• When selecting PNP output: Max. source current 60 mA, When selecting NPN output: Max. sink current 60 mA
• Applied voltage: same as supply voltage When selecting PNP output: between the auxiliary output and +V,
When selecting NPN output: between the auxiliary output and 0 V
• Residual voltage: 2.5 V or less (When selecting PNP output: source current 60 mA, when selecting NPN output: sink current 60 mA)
(when using 20 m 65.617 ft length cable)
OFF when control outputs are ON, ON when control outputs are OFF (Factory setting, operating mode can be changed using the SFB-HC handy-controller).
Incorporated
OFF replay: 34 ms or less, ON replay 110 ms or less
Interference prevention function
Incorporated (Note 7) (Available only when in series connection for SF4B-□-03)
Emission halt function / Interlock function
Incorporated / Incorporated [Manual reset / Auto reset (Note 8)]
External device monitoring function
Incorporated
Override function / Muting function
Incorporated (Note 7) (excluding SF4B-□-03) / Incorporated (Note 7) (excluding SF4B-□-03)
Environmental resistance
Optional functions (Note 9)
Fixed blanking, floating blanking, auxiliary output switching, interlock setting changing, external relay monitor setting changing,
muting setting changing, protecting, light emitting amount control
Degree of protection
IP67 / IP65 (IEC)
Ambient temperature
–10 to +55 °C +14 to +131 °F (No dew condensation or icing allowed), Storage: –25 to +70 °C –13 to +158 °F
Ambient humidity
Ambient illuminance
Dielectric strength voltage
30 to 85 % RH, Storage: 30 to 95 % RH
Incandescent light: 3,500 ℓx or less at the light-receiving face
1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance
20 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
Vibration resistance
10 to 55 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each
Shock resistance
Emitting element
Material
Connecting method / Cable length
Accessories
26
SF4B-F□(G)
300 m/s2 acceleration (30 G approx.) in X, Y and Z directions for three times each
Infrared LED (Peak emission wavelength: 870 nm 0.034 mil)
Enclosure: Aluminium, Upper / lower case: Aluminium, Sensing surface: Polycarbonate and Polyester resin, Cap: PBT
Connector / Total length up to 50 m 164.042 ft is possible for both emitter and receiver, with optional mating cables (Note 10)
MS-SFB-2 (Intermediate supporting bracket): (Note 11) MS-SFB-2 (Intermediate supporting bracket): (Note 11) MS-SFB-2
MS-SF4BG-2 (Intermediate supporting bracket): (Note 12) MS-SF4BG-2 (Intermediate supporting bracket): (Note 12) (Intermediate supporting bracket): (Note 11)
SF4B-TR14 (Test rod): 1 No.
SF4B-TR25 (Test rod): 1 No.
MS-SF4BG-2 (Intermediate supporting bracket): (Note 12)
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F.
2) PLe SIL3 compliant from production in August 2009.
3) The operating range is the possible setting distance between the emitter and the receiver.
4) When the floating blanking function is used, the size of the min. sensing object is changed. For details, refer to “Safety distance” (p.36~).
5) The outputs are not “OFF” when muting function is active even if the beam channel is interruped.
6) In case the blanking function is valid, the operation mode is changed. For details, refer to “Safety distance” (p.36~).
7) Please use 12-core cable.
8) The manual reset and auto reset are possible to be switched depending on the wiring status.
9) In case of using optional function, the handy-controller (SFB-HC) (optional) is required. However, a handy-controller cannot be used with the SF4B-□-01,
SF4B-□-03 and the SF-C14EX-01.
10) The cable can be extended within 30 m 98.425 ft (for emitter / receiver) when two light curtains are connected in series, within 20 m 65.617 ft when three light curtains are
connected in series. Furthermore, when the muting lamp is used, the cable can be extended within 40 m 131.234 ft (for emitter / receiver).
11) The intermediate supporting bracket (MS-SFB-2) is enclosed with the following models. The number of sets required varies depending on the product.
1 set: SF4B-F□............... Light curtain with 79 to 111 beam channels, SF4B-H□............... Light curtain with 40 to 56 beam channels,
SF4B-A□.............. Light curtain with 20 to 28 beam channels
2 sets: SF4B-F127, SF4B-H□ ...Light curtain with 64 to 80 beam channels, SF4B-A□...Light curtain with 32 to 40 beam channels
3 sets: SF4B-H□.............. Light curtain with 88 to 96 beam channels, SF4B-A□................. Light curtain with 44 to 48 beam channels
12) The intermediate supporting bracket (MS-SF4BG-2) is enclosed with the following models.
1 set: SF4B-F□G............ Light curtain with 79 to 127 beam channels, SF4B-H□G............ Light curtain with 40 to 64 beam channels
SF4B-A□G............ Light curtain with 20 to 32 beam channels
2 sets: SF4B-H□G............ Light curtain with 72 to 96 beam channels, SF4B-A□G.............. Light curtain with 36 to 48 beam channels
SF4B
SPECIFICATIONS
Control units
Connectable light curtains
Control category
Supply voltage / Current consumption
Fuse (rating)
Enabling path
Utilization category
Rated operation voltage
(Ue) /
Rated operation current (le)
Contact resistance
Contact protection fuse rating
Pick-up delay (Auto reset / Manual reset)
Response time
Auxiliary output
Rated operation voltage / current
Contact protection fuse rating
Semiconductor auxiliary output
(AUX)
Output operation
Excess voltage category
Polarity selection function
(Note 4)
Pollution degree
Protection
Ambient temperature
Enclosure material
Weight
SF-C11 (Note 2)
SF-C12
Notes: 1) W
here measurement conditions have not been specified precisely, the
conditions used were an ambient temperature of +20 °C +68 °F.
2) SF-C11 and SF-C13 have acqusred the Korea S-mark.
3) If several SF-C11 or SF-C13 units are being used in a line together, leave
a space of 5 mm 0.197 in or more between each unit. If the units are
touching each other, reduce the rated operating current for safety output
in accordance with the ambient operating temperature as shown in the
graphs at right.
4) Please switch the sliding switch to the PNP side for minus ground and to
the NPN side for plus ground.
5) For details of control unit SF-C1□ (SF-C10 series), refer to the website or
general catalog.
Item
Model No.
SF-C13 (Note 2)
SF4B / SF2B series
SF4B series
Light curtains manufactured by Panasonic
ISO 13849-1 (EN ISO 13849-1, JIS B 9705-1) compliance up to Category 4, PLe standards
24 V DC ±10 % Ripple P-P 10 % or less / 100 mA or less (excluding light curtain)
Built-in electronic fuse, Triggering current: 0.5 A or more, Reset after power down
NO contact × 3 (13-14, 23-24, 33-34)
NO contact × 2 (13-14, 23-24)
NO contact × 3 (13-14, 23-24, 33-34)
AC-15, DC-13 (IEC 60947-5-1)
30 V DC / 6 A, 230 V AC / 6 A, resistive load 24 V DC / 1 A, resistive load
30 V DC / 4 A, 230 V AC / 4 A, resistive load
(For inductive load, during contact protection) (For inductive load, during contact protection) (For inductive load, during contact protection)
Min. applicable load: 10 mA (at 24 V DC) (Note 3) Min. applicable load: 15 mA (at 24 V DC) Min. applicable load: 10 mA (at 24 V DC) (Note3)
100 mΩ or less (initial value)
50 mΩ or less (initial value)
100 mΩ or less (initial value)
6 A (slow blow)
3 A (slow blow)
4 A (slow blow)
80 ms or less / 90 ms or less
30 ms or less / 30 ms or less
80 ms or less / 90 ms or less
10 ms or less
14 ms or less
10 ms or less
Safety relay contact (NC contact) ×1 (41-42) (Related to enabling path) Safety relay contact (NC contact) × 1 (31-32) (Related to enabling path) Safety relay contact (NC contact) × 1 (41-42) (Related to enabling path)
24 V DC / 2 A, Min. applicable load: 10 mA (at 24 V DC) 30 V DC / 3 A, Min. applicable load: 15 mA (at 24 V DC) 24 V DC / 2 A, Min. applicable load: 10 mA (at 24 V DC)
2 A (slow blow)
3 A (slow blow)
2 A (slow blow)
–
PNP open‑collector transistor
PNP open-collector transistor NPN open-collector transistor
–
ON when the light curtain is interrupted
Related to auxiliary output of light curtain
Ⅱ
Ⅲ
Ⅱ
Incorporated (Cable connection allows selection of plus / minus ground)
Incorporated (Sliding switch allows selection of plus / minus ground)
Minus ground: Correspond to PNP output light curtain
Minus ground: Correspond to PNP output light curtain
Plus ground: Correspond to NPN output light curtain
Plus ground: Correspond to NPN output light curtain
2
Enclosure: IP40, Terminal: IP20
IP65
Enclosure: IP40, Terminal: IP20
–10 to +55 °C +14 to +131 °F (No dew condensation or icing allowed), Storage: –25 to +70 °C –13 to +158 °F
ABS
Die-cast aluminum
ABS
Net weight: 320 g approx.
Net weight: 1 kg approx.
Net weight: 200 g approx.
Dilating when SF-C11 units
are mounted close together
6
5
4
3
2
1
0
32
Dilating when SF-C13 units
are mounted close together
Rated operation current (A)
Model No.
Rated operation current (A)
Item
35 40 45 50 55
95 104 113 122 131
Ambient temperature (°C °F)
6
5
4
3
2
1
0
32
35 40 45 50 55
95 104 113 122 131
Ambient temperature (°C °F)
SF-C14EX(-01) (Note 2)
Connectable light curtains
SF4B series
Control category
ISO 13849-1 (EN ISO 13849-1, JIS B 9705-1) compliance up to Category 4, PLe standards
Supply voltage / Current consumption
24 V DC ±10 % Ripple P-P 10 % or less / 0.2 A or less (Excluding light curtain and other external connecting device)
Enabling path (Enabling path 1, 2, 3) PNP open-collector transistor 2 outputs × 3 or NPN open-collector transistor 2 outputs × 3 (selectable using a slider switch)
Enabling path 1: ON when the light curtain is in light receiving condition, OFF when the light curtain is in light interrupted condition (Note 3)
Operation mode
Enabling path 2: ON when the light curtain is in light receiving condition or the muting function is valid
(Output operation)
OFF when the light curtain is in light interrupted condition and the muting function is invalid (Note 3)
Enabling path 3: ON when the emergency stop is invalid, OFF when the emergency stop is valid
OFF response: 14 ms or less (Enabling path 1 and 2: including the response time of the light curtain)
Response time
ON response: 90 ms or less (auto-reset) / 140 ms or less (manual reset) (Note 4)
PNP open-collector transistor × 3 or NPN open-collector transistor × 3 (selectable using a slider switch)
Auxiliary outputs
Auxiliary output 1, 2, 3, 4
• Maximum source current: 60 mA or less
• Maximum sink current: 60 mA or less
(Note 5)
• Applied voltage: same as supply voltage (between the auxiliary output and +V)
• Applied voltage: same as supply voltage (between the auxiliary output and 0 V)
• Residual voltage: 2 V or less (at 60 mA source current)
• Residual voltage: 2 V or less (at 60 mA sink current)
Auxiliary output 1: ON when the muting function is invalid, OFF when the muting function is valid
Auxiliary output 2: ON when the override function is invalid, OFF when the override function is valid
Operation mode
Auxiliary output 3: ON when the muting lamp is normal, OFF when the muting lamp is error
(Output operation)
Auxiliary output 4: ON when the light curtain is in light interrupted condition, OFF when the light curtain is in light receiving condition (Note 5)
Muting lamp output
Applicable muting lamp: 24 V DC, 3.6 to 30 W (L1, L2 of each unit)
Protection
Enclosure: IP40, Terminal: IP20
Ambient temperature
–10 to +55 °C +14 to +131 °F (No dew condensation or icing allowed), Storage: –25 to +70 °C –13 to +158 °F
Material
Enclosure: ABS
Connection terminal
Detachable spring-cage terminal
Weight
Net weight: 250 g approx.
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F.
2) S
F-C14EX-01 is Handy-controller non-compatible type.
3) Both enabling path 1 and 2 are OFF when the emergency stop is valid regardless of whether the light curtain is in the light receiving or light interrupted condition.
4) The auto-reset cannot be used with enabling path 3.
5) The auxiliary output incorporated in the SF4B series is outputed.
6) For details of control unit SF-C14EX(-01), refer to the website or general catalog.
27
SF4B
SPECIFICATIONS
Handy-controller
Model No.
Item
Supply voltage
SFB-HC
24 V DC ±10 % Ripple P-P10 % or less (common to light curtain power supply)
Current consumption
Communication method
Digital display
65 mA or less
RS-485 two-way communications (Specific procedure)
4-digit red LED display × 2 (Selected beam channels, setting contents etc. are displayed.)
Function indicator
Green LED × 9 (set function is displayed.)
Fixed blanking (Factory setting: Disabled) / Floating blanking (Factory setting: Disabled) /
Auxiliary output change (Factory setting: Negative Logic of OSSD) /
Light emitting amount control (Factory setting: Disabled) /
Muting setting change [Factory setting: All beam channels enabled, A = B, Setting of the muting lamp diagnosis
function enabled (Ver. 2 or later), Muting sensor output operation setting N.O. / N.O. (Ver. 2.1 or later)]
Interlock setting change (Factory setting: start / restart) /
External device monitoring setting change (Factory setting: Enabled, 300 ms) / Override setting changing function
60 sec. (Ver. 2.1 or later) / Setting detail monitoring /
Protecting (Factory setting: Disabled)(Factory password setting: 0000) / Initialization / Copy
Functions
Ambient temperature
Ambient humidity
–10 to +55 °C +14 to +131 °F (No dew condensation or icing allowed), Storage: –25 to +70 °C –13 to +158 °F
30 to 85 % RH, Storage: 30 to 85 % RH
Voltage withstandability
Insulation resistance
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure
Cable
8-core shielded cable, 0.5 m 1.640 ft long, with a connector at the end (2 cables)
Weight
Net weight: 200 g approx.
Accessories
Adapter cable: 2 cables
Note: Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F.
Laser alignment tool
Model No.
Item
Supply voltage
SF-LAT-2N / SF-LAT-4BG (For SF4B-□G)
3 V (LR6 battery × 2 pcs.)
Battery
1.5 V (LR6 battery) × 2 pcs. (replaceable)
Battery lifetime
30 hours approx. of continuous operation (LR6 battery, at +25 °C +77 °F ambient temperature)
Red semiconductor laser: Class 2 (IEC / JIS / FDA) (Max. output: 1 mW, Peak emission wavelength: 650 nm 0.026 mil) (Note 2)
Light source
Spot diameter
10 mm 0.394 in approx. (at 5 m 16.404 ft distance)
Ambient temperature
Ambient humidity
0 to +40 °C +32 to +104 °F (No dew condensation), Storage: 0 to +55 °C +32 to +131 °F
35 to 85 % RH, Storage: 35 to 85 % RH
Material
Enclosure: ABS, Mounting part: Aluminum
Weight
Net weight: 200 g approx. (including batteries)
Accessories
LR6 battery: 2 pcs.
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F.
2) A
s for FDA regulation, the product complies with 21 CFR 1040.10 and 1040.11 based on Laser Notice No. 50, dated June 24, 2007, issued by CDRH
under the FDA.
Corner mirror
Model No.
Item
RF-SFBH-□
With one mirror: Declined to 90 %, With two mirrors: Declined to 80 % (When used in combination with the SF4B series)
Ambient temperature
–10 to +55 °C +14 to +131 °F (No dew condensation or icing allowed), Storage: –25 to +70 °C –13 to +158 °F
Environmental
resistance
Attenuation rate of sensing range
Ambient humidity
Vibration resistance
Shock resistance
Material
Accessories
30 to 85 % RH, Storage: 30 to 95 % RH
10 to 55 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each
300 m/s2 acceleration (30 G approx.) in X, Y and Z directions for three times each
Enclosure: Alminium, Mounting bracket: Stainless steel, Mirror (rear surface mirror): Glass, Side cover: EPDM
Intermediate supporting bracket: 1 set (RF-SFBH-40/48/56/64), 2 sets (RF-SFBH-72/80/88/96)
Note: Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F.
28
SF4B
I/O CIRCUIT AND WIRING DIAGRAMS
I/O circuit diagram
Emitter
Emitter
Color code of mating cable
Color code of mating cable
(Brown) +V
(Red) Muting lamp output
* S1
(Brown) +V
(Shield) Output polarity setting wire
* S1
* S1
+
–
(Gray) Interference prevention +
(Gray / Black) Interference prevention –
0.22 μF
470 Ω
0.22 μF
470 Ω
0.22 μF
470 Ω
(Yellow) Override input
(Pale purple) Interlock setting input
24 V DC
±10 %
Load
470 Ω
0.22 μF
470 Ω
0.22 μF
470 Ω
(Pink) Emission halt input / Reset input
Load
(Gray) Interference prevention +
(Gray / Black) Interference prevention –
Sensor circuit
Sensor circuit
(Yellow-green / Black)
Auxiliary output
0.22 μF
(Yellow) Override input
(Pale purple) Interlock setting input
(Yellow-green / Black)
Auxiliary output
* S1
(Pink) Emission halt input / Reset input
+
–
* S1
24 V DC
±10 %
* S1
(Red) Muting lamp output
(Shield) Output polarity setting wire
Internal circuit
Receiver
(Blue) 0 V
(Blue) 0 V
(Orange) Synchronization +
(Orange) Synchronization +
(Orange / Black)
Synchronization –
Users’ circuit
Receiver
(Orange / Black)
Synchronization –
(Orange) Synchronization +
* S1
(Brown) +V
(Gray) Interference prevention +
(Gray / Black) Interference prevention –
0.047 μF 1 kΩ
Users’ circuit
(Orange / Black)
Synchronization –
(Orange) Synchronization +
(Brown) +V
* S1
(Shield) Output polarity setting wire
K1
(Light blue / White) Muting input A
(Light blue / Black) Muting input B
K1
(Black) OSSD 1
K2
K2
(Yellow-green) External device monitoring input
Sensor circuit
0.047 μF 1 kΩ
Sensor circuit
(Orange / Black) Synchronization –
Internal circuit
0.22 μF 470 Ω
(Black) OSSD 1
(White) OSSD 2
(Gray) Interference prevention +
(Gray / Black) Interference prevention –
(White) OSSD 2
(Shield) Output polarity setting wire
K1
K2
(Blue) 0 V
0.22 μF
470 Ω
0.047 μF
1 kΩ
0.047 μF
1 kΩ
K1, K2: Force-guided relay or magnet contactor
Internal circuit
(Yellow-green) External device monitoring input
(Light blue / White) Muting input A
K1
* S1
(Light blue / Black) Muting input B
K2
* S1
(Blue) 0 V
K1, K2: Force-guided relay or magnet contactor
Users’ circuit
Internal circuit
Users’ circuit
Note: The above diagram is when using a 12-core cable. If an 8-core cable
is used, the red, yellow, gray, gray / black, light blue / white and light
blue / black lead wires are absent.
Note: The above diagram is when using a 12-core cable. If an 8-core cable
is used, the red, yellow, gray, gray / black, light blue / white and light
blue / black lead wires are absent.
* S1
* S1
Switch S1
• Emission halt input / Reset input
For manual reset
Vs to Vs – 2.5 V (sink current 5 mA or less): Emission halt (Note 1)
Open: Emission
For automatic reset
Vs to Vs – 2.5 V (sink current 5 mA or less): Emission (Note 1)
Open: Emission halt
• Interlock setting input, Override input, Muting input A / B,
External device monitoring input
Vs to Vs – 2.5 V (sink current 5 mA or less): Enabled (Note 1)
Open: Disabled
Switch S1
• Emission halt input / Reset input
For manual reset
0 to +1.5 V (source current 5 mA or less): Emission halt
Open: Emission
For automatic reset
0 to +1.5 V (source current 5 mA or less): Emission
Open: Emission halt
• Interlock setting input, Override input, Muting input A / B,
External device monitor input
0 to +1.5 V (source current 5 mA or less): Enabled
Open: Disabled
Note: Vs is the applying supply voltage.
29
SF4B
I/O CIRCUIT AND WIRING DIAGRAMS
Refer to the manual on our website for details.
Connection example
Standard components (8-core cable): Interlock function “enabled (manual reset)”, external device monitoring function “enabled”
Emitter
Color code of mating cable
(Brown) +V
The diagram at left shows the configuration when using PNP
output, interlock function “enabled (manual reset)” and external
device monitoring function “enabled”.
* S1
(Yellow-green / Black) Auxiliary output
Cable color: Gray
(Pale purple) Interlock setting input
(Pink) Emission halt input / Reset input
Load
(Shield) Output polarity setting wire
(Blue) 0 V
(Orange) Synchronization +
Receiver
+
–
24 V DC
±10 %
In case of setting the interlock function to “disabled (automatic reset)”
Emitter
(Orange / Black) Synchronization –
(Pink) Emission halt input / Reset input
(Orange / Black) Synchronization –
(Pale purple) Interlock setting input
(Orange) Synchronization +
Cable color: Gray
with black line
+24 V DC
* S1
Open
(Brown) +V
* Refer to the SF4B manual for details of the interlock function.
K1
(Yellow-green) External device monitoring input
K2
In case of setting the external device monitoring function to “disabled”
(Black) OSSD 1
(White) OSSD 2
(Shield) Output polarity setting wire
Emitter
K1
K2
(Blue) 0 V
* S1
K1, K2: Forced-guided relay or magnet contactor
Switch S1
• Emission halt input / Reset input
For manual reset
Vs to Vs – 2.5 V (sink current 5 mA or less): Emission halt (Note)
Open: Emission
For automatic reset
Vs to Vs – 2.5 V (sink current 5 mA or less): Emission (Note)
Open: Emission halt
* Refer to the SF4B manual for details of the external device monitoring
function.
Cable color: Gray
The diagram at left shows the configuration when using NPN
output, interlock function “enabled (manual reset)” and external
device monitoring function “enabled”.
Color code of mating cable
(Brown) +V
(Shield) Output polarity setting wire
(Pale purple) Interlock setting input
(Pink) Emission halt input / Reset input
(Yellow-green / Black) Auxiliary output
* S1
Receiver
(Yellow-green) External device monitoring input
Note: Vs is the applying supply voltage.
Emitter
(Yellow-green / Black) Auxiliary output
Load
In case of setting the interlock function to “disabled (automatic reset)”
+
–
24 V DC
±10 %
Emitter
(Blue) 0 V
(Orange) Synchronization +
Receiver
(Orange / Black) Synchronization –
(Pale purple) Interlock setting input
(Orange / Black) Synchronization –
(Pink) Emission halt input / Reset input
* S1
(Orange) Synchronization +
Cable color: Gray
with black line
(Brown) +V
(Shield) Output polarity setting wire
0V
K1
K2
(Black) OSSD 1
(White) OSSD 2
(Yellow-green) External device monitoring input
(Blue) 0 V
* S1
Open
* Refer to the SF4B manual for details of the interlock function.
In case of setting the external device monitoring function to “disabled”
K1
K2
Emitter
K1, K2: Forced-guided relay or magnet contactor
Switch S1
• Emission halt input / Reset input
For manual reset
0 to +1.5 V (source current 5 mA or less): Emission halt
Open: Emission
For automatic reset
0 to +1.5 V (source current 5 mA or less): Emission
Open: Emission halt
(Yellow-green / Black) Auxiliary output
Receiver
(Yellow-green) External device monitoring input
* Refer to the SF4B manual for details of the external device monitoring
function.
30
SF4B
I/O CIRCUIT AND WIRING DIAGRAMS
Refer to the manual on our website for details.
Connection example
Muting control components (12-core cable, with interference prevention wires): Interlock function “disabled (automatic reset)”, external device monitoring function “disabled”
Color code of mating cable
Emitter
(Red) Muting lamp output
Cable color: Gray
The diagram at left shows the configuration when using PNP
output, interlock function “disabled (automatic reset)” and external
device monitoring function “disabled”.
(Brown) +V
* S1
(Gray) Interference prevention +
Uses when the interference
prevention function is used
(Gray / Black) Interference prevention –
(Yellow) Override input
(Pale purple) Interlock setting input: Open
(Pink) Emission halt input / Reset input
(Shield) Output polarity setting wire
(Blue) 0 V
(Orange) Synchronization +
Receiver
Cable color: Gray
with black line
* S1
In case of setting the interlock function to “enabled (manual reset)”
* S1
(Yellow-green / Black) Auxiliary output
• When the interlock function is “enabled (manual reset)”,
the override function cannot be used.
+
–
24 V DC
±10 %
Emitter
(Pink) Emission halt input / Reset input
(Orange / Black) Synchronization –
(Orange / Black) Synchronization –
(Orange) Synchronization +
(Brown) +V
+24 V DC
* S1
(Pale purple) Interlock setting input
* Refer to the SF4B manual for details of the interlock function.
* S1
(Gray) Interference prevention +
Uses when the interference
* S1
prevention function is used
(Gray / Black) Interference prevention –
(Light blue / White) Muting input A
(Light blue / Black) Muting input B
(Yellow-green) External device monitoring input
(Black) OSSD 1
(White) OSSD 2
K1, K2: ForcedK1
(Shield) Output polarity setting wire
guided relay or
K2
(Blue) 0 V
magnet contactor
Switch S1
• Emission halt input / Reset input
For manual reset
Vs to Vs – 2.5 V (sink current 5 mA or less): Emission halt (Note), Open: Emission
For automatic reset
Vs to Vs – 2.5 V (sink current 5 mA or less): Emission (Note), Open: Emission halt
• Override input, Muting input A / B, External device monitoring input
Vs to Vs – 2.5 V (sink current 5 mA or less): Enabled (Note), Open: Disabled
In case of setting the external device monitoring function to “enabled”
+24 V DC
K1
Receiver
K2
(Yellow-green)
External device monitoring input
(Black) OSSD 1
K1
(White) OSSD 2
K2
K1, K2: External device 0 V
* Refer to the SF4B manual for details of the external device monitoring
function.
Note: Vs is the applying supply voltage.
Color code of mating cable
Emitter
Cable color: Gray
The diagram at left shows the configuration when using NPN
output, interlock function “disabled (automatic reset)” and external
device monitoring function “disabled”.
(Brown) +V
(Shield) Output polarity setting wire
(Yellow) Override input
* S1
(Pale purple) Interlock setting input: Open
(Pink) Emission halt input / Reset input
(Gray) Interference prevention +
Uses when the interference
prevention function is used
(Gray / Black) Interference prevention –
(Yellow-green / Black) Auxiliary output * S1
+
–
24 V DC
±10 %
In case of setting the interlock function to “enabled (manual reset)”
• When the interlock function is “enabled (manual reset)”,
the override function cannot be used.
(Red) Muting lamp output
Emitter
(Blue) 0 V
(Orange) Synchronization +
Receiver
Cable color: Gray
with black line
(Pink) Emission halt input / Reset input
* S1
(Orange) Synchronization +
(Brown) +V
K1
(Shield) Output polarity setting wire
K2
(Black) OSSD 1
(White) OSSD 2
(Gray) Interference prevention +
Uses when the interference
prevention function is used
(Gray / Black) Interference prevention –
(Yellow-green) External device monitoring input
(Light blue / White) Muting input A
* S1
(Light blue / Black) Muting input B
* S1
(Pale purple) Interlock setting input
(Orange / Black) Synchronization –
(Orange / Black) Synchronization –
(Blue) 0 V
* S1
0V
* Refer to the SF4B manual for details of the interlock function.
In case of setting the external device monitoring function to “enabled”
+24 V DC
K1, K2: Forcedguided relay or
magnet contactor
Switch S1
• Emission halt input / Reset input
For manual reset
0 to +1.5 V (source current 5 mA or less): Emission halt, Open: Emission
For automatic reset
0 to +1.5 V (source current 5 mA or less): Emission, Open: Emission halt
• Override input, Muting input A / B, External device monitoring input
0 to +1.5 V (source current 5 mA or less): Enabled, Open: Disabled
K1
Receiver
K2
(Black) OSSD 1
(White) OSSD 2
(Yellow-green)
External device monitoring input
K1
K2
0V
K1, K2: External device
* Refer to the SF4B manual for details of the external device monitoring
function.
31
SF4B
I/O CIRCUIT AND WIRING DIAGRAMS
SF-C11
SF4B series wiring diagram (Control Category 4)
When SF-C11 is connected to the light curtain, be sure to
use the following mating cable.
SFB-CB□, SFB-CCJ10□
For PNP output (minus ground)
• Set the light curtain input polarity selection switch to the
PNP side and ground the 0 V line.
Light curtain input polarity selection switch
+24 V DC
A1
RESET
(Note 1)
(Note 1)
A B
(Note 2) X1 X2 X3
F
Receiver side
connector
L1
FUSE1
Terminal
FUSE2
13 23
33 41
K1
NPN
SF-C11 control circuit PNP
Ui
Terminal arrangement diagram
F.G.
OUT
AUX
0V
T2
TEST
(Note 3)
INTER_LOCK
FAULT
T1
KA, KB: Force-guided relay or
magnet contactor
F.G.
14 24
34 42
L1 L2 L3
KB
KA
N
X1 X2
Reset output terminal
Reset input terminal (Manual)
KB
X3
Reset input terminal (Automatic)
KA
A
T1
2
1
3
SF-C11 control circuit
OUT
A2
7
4
6
AUX
T2
NPN
PNP
INTER_LOCK
Test input terminal
AUX
Semiconductor auxiliary output
Connector
pin No.
8
5
Ui
Test output terminal
T2
Pin layout for light curtain connectors
B
F
Receiver side
connector
Emitter side
connector
A
Not used
B
M
X3
Auxiliary output (NC contact × 1)
X2
RESET
A1
0V
X1
Light curtain input polarity
selection switch
For NPN output (plus ground)
+24 V DC
A2
41-42
Notes: 1) T
he above diagram is when using manual reset. If
3
automatic reset is used, disconnect the lead from X2 and
connect it to X3. In this case, a reset (RESET) button is not needed.
2) Use a momentary-type switch as the reset (RESET) button.
3) Emission halt occurs when the test (TEST) button is open, and
emission occurs when the test (TEST) button is short-circuited. If
not using the test (TEST) button, short-circuit T1 and T2.
• In the above
diagram,
set the light
curtain input
polarity
selection
switch to the
NPN side and
ground the +
side.
+24 V DC
13-14, 23-24, 33-34 Enabling path (NO contact × 3)
K2
Emitter side
connector
A2
Function
A1
FAULT
T1
Emitter side
connector
Receiver side
connector
1
Interlock
OSSD 2
2
+24 V DC
+24 V DC
3
Emission halt
OSSD 1
4
Auxiliary output
EDM (External relay monitor)
5
Synchronization wire + Synchronization wire +
6
Synchronization wire – Synchronization wire –
7
0V
0V
8
Shield wire
Shield wire
0 V TEST
SF-C12
SF4B series wiring diagram (Control Category 4)
• Set the two light curtain input polarity select switches to
the PNP side and connect the FG terminal to the 0 V line.
Emission halt input switch
(Note)
(Note)
Interference
prevention wire
Emitter side connector
MPCE1
MPCE2
FUSE
PNP
FUSE
Light curtain input
polarity selection switch
NPN
Receiver side connector
X1
X2
T1
T2
E–
E+
R–
R+
FB1
FB2
FB3
FB4
32
31
24
23
14
13
A1
A2
FG
Terminal arrangement
diagram
Enabling path Auxiliary Power input
output
24 V DC ±10 %
Note: The above diagram is when using manual reset. If automatic reset is
used, connect a normally closed type pushbutton switch between T1
and T2 and leave between X1 and X2 open.
Terminal
FG
A2
A1
13-14, 23-24
31-32
FB4
FB3
FB2
FB1
Function
Frame ground (F.G.) terminal
0V
+24 V DC
Enabling path (NO contact × 2)
Auxiliary output (NC contact × 1)
External relay
monitor terminal 2
External relay
monitor terminal 1
• In the above diagram, set the two light curtain input
polarity selection switches to the NPN side and connect
the F.G. terminal to the + side.
32
Terminal
R+
R–
E+
E–
T2
T1
X2
X1
Function
Interference prevention wire – (Receiver side)
Interference prevention wire + (Receiver side)
Interference prevention wire – (Emitter side)
Interference prevention wire + (Emitter side)
Emission halt input
terminal
Automatic reset / manual reset selection terminal
Manual reset: X1 – X2 short-circuited
Pin layout for light curtain connectors
1
10
2
9
3
12
11
8
For NPN output (plus ground)
X1
X2
T1
T2
E–
E+
R–
R+
FB1
FB2
FB3
FB4
32
31
24
23
14
13
A1
A2
FG
When SF-C12 is connected to the light curtain, be sure to
use the following maing cable.
SFB-CB05-MU, SFB-CCJ10□-MU
For PNP output (minus ground)
7
6
5
4
Note: Input and output
for pin Nos. 11
and 12 are not
used by this
product.
Connector
pin No.
1
2
3
4
5
6
7
8
9
10
11
12
Emitter side
connector
Interlock
+24 V DC
Emission halt
Auxiliary output
Synchronization wire +
Synchronization wire –
0V
Shield wire
Interference prevention wire +
Interference prevention wire –
(Override input)
(Muting lamp output)
Receiver side
connector
OSSD 2
+24 V DC
OSSD 1
EDM (External relay monitor)
Synchronization wire +
Synchronization wire –
0V
Shield wire
Interference prevention wire +
Interference prevention wire –
(Muting input 1)
(Muting input 2)
SF4B
I/O CIRCUIT AND WIRING DIAGRAMS
SF-C13
SF4B series wiring diagram (Control Category 4)
For PNP output (minus ground)
For NPN output (plus ground)
• Connect the light curtain control outputs OSSD 1 and
OSSD 2 to S1 and S2 respectively.
• Connect the light curtain control outputs OSSD 1 and
OSSD 2 to S4 and S2 respectively and ground the + side.
(Orange / Black) Synchronization –
Emitter
Receiver
Cable color:
Gray with black line
Cable color: Gray
(Orange)
Synchronization +
+V (Brown)
+24 V DC
Output Emission
halt Auxiliary output Interlock setting
polarity
setting wire input / Reset (Yellow-green / input (Pale purple)
Black) Open +V (Brown)
(Shield) input (Pink)
Load
0 V (Blue)
0 V (Blue)
(Orange / Black) Synchronization –
Emitter
(Orange)
Synchronization +
+V (Brown)
+24 V DC
Output
Emission halt Auxiliary output Interlock setting
polarity
input / Reset input (Yellow-green / input (Pale purple)
setting wire
(Pink)
Black) Open
(Shield)
0V
Load +V (Brown)
(Blue)
Output
polarity
setting wire
(Shield)
External device monitoring input (Yellow-green)
OSSD 2 (White)
OSSD 1 (Black)
OSSD 2 (White)
L1
L1
A1
S1
S2 S3
(Note 1) FUSE1
S4 X1 X2
X3
F
13 23
(Note 1) FUSE1
FUSE2
33 41
A1
F.G.
S1
S2 S3 S4
X1
X2
F
K1
Ui
A2
0V
AUX
F.G.
KA, KB: Force-guided relay or
magnet contactor
KA
N
33 41
RESET
(Note 1,2)
K2
FAULT
14 24
FUSE2
SF-C13 control circuit
K2
INTER_LOCK
X3 13 23
K1
Ui
SF-C13 control circuit
OUT
Output
polarity
setting wire
(Shield)
0 V (Blue)
External device monitoring input (Yellow-green)
OSSD 1 (Black)
RESET
(Note 1,2)
Receiver
Cable color:
Gray with black line
Cable color: Gray
34 42
L1 L2 L3
KB
OUT
KB
KA
M
3
Notes: 1) The above diagram is when using manual reset. If automatic reset
is used, disconnect the lead from X2 and connect it to X3. In this
case, a reset (RESET) button is not needed.
2) Use a momentary-type switch as the reset (RESET) button.
A2
0V
AUX
INTER_LOCK
FAULT
14 24
KA, KB: Force-guided relay or
magnet contactor
KA
N
34 42
L1 L2 L3
KB
KB
KA
M
3
Notes: 1) T
he above diagram is when using manual reset. If automatic reset
is used, disconnect the lead from X2 and connect it to X3. In this
case, a reset (RESET) button is not needed.
2) Use a momentary-type switch as the reset (RESET) button.
Terminal arrangement diagram
A1
A2
S1
S2
S3
S4
AUX
X1
X2
X3
13
14
23
24
33
34
41
42
Terminal
Function
A1
+24 V DC
A2
0V
S1 to S4
Light curtain control output (OSSD) input terminal
AUX
Semiconductor auxiliary output
X1
Reset output terminal
X2
Reset input terminal (Manual)
X3
Reset input terminal (Automatic)
13-14, 23-24, 33-34
Enabling path (NO contact × 3)
41-42
Auxiliary output (NC contact × 1)
When SF-C13 is connected to the light curtain, be sure
to use the following descrete wire mating cable.
SFB-CCB□(-MU), SFB-CC□(-MU)
Use a separate terminal block to carry out
wiring for light curtains that cannot be
connected to the SF-C13.
33
SF4B
I/O CIRCUIT AND WIRING DIAGRAMS
SF-C14EX(-01)
SF4B series wiring diagram (Control Category 4)
For PNP output (minus ground)
• Set the output polarity selection switch to the PNP side and ground the 0 V line.
Emergency
stop button
+24 V DC
(Note 1)
KA
RESET
KB (Note 2)
(Note 1)
KC
RESET
KD (Note 2)
PLC etc.
KE RESET
KF (Note 2)
• When SF-C14EX is connected to
the light curtain, be sure to use the
following mating cable.
SFB-CB□-EX, SFB-CCJ10□
• If the NO (Normally Open) contact
switch is used as a muting sensor,
wire it as shown in the figure below.
S3+ S3 S3– S4+ S4 S4–
A1 S11 S12 S21 S22 X11 X12 X13 X21 X22 X23 X31 X32 AUX1 AUX2 AUX3 AUX4 IE+ IE– IR+ IR–
Receiver side NPN
Output polarity
connector
selection switch
PNP
SF-C14EX(-01) control circuit
• If the emergency stop button is
not used, short-circuit between the
terminals S11 to S12 and S21 to
S22 directly.
Emitter side
connector
A2 S3+ S3 S3– S4+ S4 S4– T1 T2 O1 O2 L1+ L1– L2+ L2– 14 24 34 44 54 64
KB
KD
KF
+V OUT 0 V +V OUT 0 V
0V
F.G.
KA
KC
KE
Muting sensor 1
(PNP output type)
Muting sensor 2
(NPN output type)
Override input
TEST
Muting lamp
output 1
3.6 to 30 W
0V
Muting lamp
output 2
3.6 to 30 W
KA to KF: Force-guided relay or
magnet contactors.
Notes: 1) The above diagram is when using manual reset. If automatic reset is used, disconnect the lead from X12 and X22, and connect them to X13 and X23,
as shown by the dotted lines. In this case, a reset (RESET) button is not needed. Terminals X31 to X32 are for manual reset only.
2) Use a momentary-type switch for the reset (RESET) button.
For NPN output (plus ground)
• Set the output polarity selection switch to the NPN side and ground the side of the power supply input.
Emergency
stop button
+24 V DC
(Note 1)
KA
RESET
KB (Note 2)
(Note 1)
KC
RESET
KD (Note 2)
KE RESET
KF (Note 2)
PLC etc.
F.G.
A1 S11 S12 S21 S22 X11 X12 X13 X21 X22 X23 X31 X32 AUX1 AUX2 AUX3 AUX4 IE+ IE– IR+ IR–
Receiver side NPN
Output polarity
connector
selection switch
PNP
Emitter side
connector
SF-C14EX(-01) control circuit
A2 S3+ S3 S3– S4+ S4 S4– T1 T2 O1 O2 L1+ L1– L2+ L2– 14 24 34 44 54 64
KB
KD
KF
+V OUT 0 V +V OUT 0 V
0V
KA
Muting sensor 1
(PNP output type)
KC
TEST
Muting sensor 2
(NPN output type)
Override input
Terminal arrangement Terminal
diagram
Muting lamp
output 1
3.6 to 30 W
Function
Muting lamp
output 2
3.6 to 30 W
Terminal
KE
+24 V DC
KA to KF: Force-guided relay or
magnet contactors.
Function
14 Enabling path 1, Beam received / Beam S11 Emergency stop
24 interrupted output of the light curtain
S12 contact input
2 NC input
34 Enabling path 2, light curtain output S21 Between S11 and S12
44 including the muting function
S22 Between S21 and S22
54
X11 Enabling path 1 reset input
Enabling path 3
64 Emergency stop output X12 X11 - X12: Manual reset
S3+ Muting sensor input 1 X13 X11 - X13: Automatic reset
(PNP output type)
S3
X21 Enabling path 2 reset input
S3+, S3–: Power supply
S3– S3: Sensor output
X22 X21 - X22: Manual reset
S4+ Muting sensor input 2 X23 X21 - X23: Automatic reset
S4
S4–
T1
T2
O1
O2
34
(NPN output type)
S4+, S4–: Power supply
S4: Sensor output
Test input terminal
Open: Test mode
Short-circuit: Normal operation
Override input terminal
Open: Invalid
Short-circuit: Valid
X31 Enabling path 3 reset input
X32 X31 - X32: Manual reset
Connector
pin No.
8
7
4
Receiver
side
connector
1
Interference prevention Interference prevention
wire +
wire +
2
+24 V DC
3
Interference prevention Interference prevention
wire –
wire –
4
Auxiliary output
Not used
Synchronization
wire +
Synchronization
wire –
Synchronization
wire +
Synchronization
wire –
6
5
Emitter
side
connector
5
6
+24 V DC
0V
0V
8
Shield wire
Shield wire
AUX3 Auxiliary output 3, Blown lamp output
AUX4 Auxiliary output 4, Light curtain auxiliary output
IR+ Interference prevention terminal, Receiver side +
0V
1
7
L2+ Muting lamp
L2– output 2
A2
2
3
AUX2 Auxiliary output 2, Override output
IE+ Interference prevention terminal, Emitter side +
+24 V DC
Pin layout for light curtain connectors
AUX1 Auxiliary output 1, Muting output
L1+ Muting lamp
L1– output 1
A1
Notes: 1) T
he left diagram is when using manual reset. If automatic reset
is used, disconnect the lead from X12 and X22, and connect
them to X13 and X23, as shown by the dotted lines. In this
case, a reset (RESET) button is not needed. Terminals X31 to
X32 are for manual reset only.
2) Use a momentary-type switch for the reset (RESET) button.
IE– Interference prevention terminal, Emitter side –
IR– Interference prevention terminal, Receiver side –
SF4B
PRECAUTIONS FOR PROPER USE
Interlock function
• The selection of manual reset / automatic reset is
available by applying the interlock input wiring. The
interlock becomes available by selecting manual reset.
(Refer to the SF4B manual for details.)
Emission halt function
• This function stops the emission process of the emitter.
You can select whether emission is on or halted by
means of the connection status for the emission halt
input / reset input wire (pink).
• During emission halt, the control outputs (OSSD 1,
OSSD 2) become OFF status.
• By using this function, malfunction due to extraneous
noise or abnormality in the control outputs (OSSD 1,
OSSD 2) and the auxiliary output can be determined
even from the machinery side.
• Normal operation is restored when the emission halt
input / reset input wire (pink) is connected to 0 V or +V.
(Refer to the SF4B manual for details.)
Auxiliary output (Non-safety output)
• This light curtain incorporates the auxiliary output
(yellowgreen / black) for the non-safety output. The
auxiliary output is incorporated with the emitter.
(Refer to the SF4B manual for details.)
External device monitoring function
• This is the function for checking whether the external safety
relay connected to the control outputs (OSSD 1, OSSD 2) perform
normally in accordance with the control outputs (OSSD 1, OSSD 2)
or not. Monitor the contacting point “b” of the external safety relay,
and if any abnormality such as deposit of the contacting point, etc.
is detected, change the status of the light curtain into lockout one,
and turn OFF the control outputs (OSSD 1, OSSD 2).
(Refer to the SF4B manual for details.)
Muting function
• This function turns the safety function of this light curtain
into disabled temporarily. When the control outputs
(OSSD 1, OSSD 2) are ON, this function is available for
passing the workpiece through the sensing area of the
light curtain without stopping the machinery.
The muting function becomes valid when all the
conditions listed below are satisfied.
However, this function connot be used with the
SF4B-□-03.
1 The control outputs (OSSD 1, OSSD 2) shall be ON.
2 The incandescent lamp with 3 to 10 W shall be
connected to the muting lamp output (red).
3 The output of the muting sensors A and B shall be
changed from OFF (open) to ON. At this time, the
time difference occurred by changing the output of the
muting sensors A and B into ON status shall be within
0.03 to 3 sec.
• The following devices, photoelectric sensor with
semiconductor output, inductive proximity sensor,
position switch on N.O. (Normally open) contact, etc. are
available for applying to the muting sensor.
• In case of using the muting function, please order 12-core
cable.
(Refer to the SF4B manual for details.)
Refer to the manual on our website for details.
Override function
• This function sets the safety function of this light curtain
enabled forcibly. When using the muting function, the
override function can be used to start the machinery at
times such as when the control outputs (OSSD 1 and
OSSD 2) are OFF or when the muting sensors are ON
when the line is to be started.
The override function becomes valid when all the
conditions listed below are satisfied.
However, this function cannot be used with the
SF4B-□-03.
(Refer to the SF4B manual for details.)
Series connection
Connectable up to 3 sets of light curtains (however, 192 beam channels max.)
(Refer to the SF4B manual for details.)
Parallel connection
Connectable up to 3 sets of light cartains
(Refer to the SF4B manual for details.)
Series and parallel mixed connection
Connectable up to 3 sets of light curtains (however, 192 beam channels max.)
(Refer to the SF4B manual for details.)
Wiring
Refer to the applicable regulations for the region where this
device is to be used when setting up the device. In addition,
make sure that all necessary measures are taken to prevent
possible dangerous operating errors resulting from earth faults.
• Make sure to carry out the wiring in the power supply off
condition.
• Verify that the supply voltage variation is within the rating.
• If power is supplied from a commercial switching
regulator, ensure that the frame ground (F.G.) terminal of
the power supply is connected to an actual ground.
• In case noise generating equipment (switching regulator,
inverter motor, etc.) is used in the vicinity of this sensor,
connect the frame ground (F.G.) terminal of the
equipment to an actual ground.
• Do not run the wires together with high-voltage lines or
power lines or put them in the same raceway. This can
cause malfunction due to induction.
Part description and function
• (Refer to the SF4B manual for details.)
Others
• Do not use during the initial transient time (2 sec.) after
the power supply is switched on.
• Avoid dust, dirt and steam.
• Take care that the light curtain does not come in direct
contact with water, oil, grease, or organic solvents, such
as, thinner, etc.
• Take care that the light curtain is not directly exposed
to fluorescent light from a rapid-starter lamp or a high
frequency lighting device, as it may affect the sensing
performance.
35
SF4B
PRECAUTIONS FOR PROPER USE
• When this device is used in the “PSDI
mode”, an appropriate control circuit must
be configured between this device and the
machinery. For details, be sure to refer to the
standards or regulations applicable in each
region or country.
• To use this product in the U.S.A., refer to
OSHA 1910. 212 and OSHA 1910. 217 for
installation, and in Europe, refer to EN 999
as well. Observe your national and local
requirements before installing this product.
Safety distance
• Calculate the safety distance correctly, and
always maintain a distance which is equal to
or greater than the safety distance, between
the sensing area of this light curtain and the
dangerous parts of the machinery. (Please
check the latest standards for the equation.)
If the safety distance is miscalculated or if
sufficient distance is not maintained, there is
a danger of serious injury or death.
• Before designing the system, refer to the
relevant standards of the region where this
device is to be used and then install this device.
Also, the below calculation is valid only when
the intrusion direction is perpendicular to the
sensing area. In case the intrusion direction
is not perpendicular to the sensing area, be
sure to refer to the relevant standard (regional
standard, specification of the machine, etc.)
for details of the calculation.
• This catalog is a guide to select a suitable product. Be
sure to read instruction manual attached to the product
prior to its use.
• Both emitter and receiver are combined adjusted on
factory setting, please apply both emitter and receiver
with the same serial No. The serial No. is indicated on
the plates of both emitter and receiver.
(Indicated under model No.)
• Make sure to carry out the test run before regular operation.
• This safety system is for use only on machinery in which the dangerous
parts can be stopped immediately, either by an emergency stop unit
or by disconnecting the power supply. Do not use this system with
machinery which cannot be stopped at any point in its operation cycle.
Sensing area
Emitter
S
Beam axis
Receiver
S: Safety distance
• Make sure to install this product such that
any part of the human body must pass
through its sensing area in order to reach
the dangerous parts of the machinery. If
the human body is not detected, there is a
danger of serious injury or death.
• Do not use any reflective type or
retroreflective type arrangement.
• Furthermore, facing several receivers
towards one emitter, or vice versa, could
produce a non‑sensing area or cause mutual
interference, which may result in serious
injury or death.
Sensing area
The sizes of the minimum sensing objects
for this device vary depending on whether
or not the floating blanking function is being
used. Calculate the safety distance with the
proper size of the minimum sensing object and
appropriate equation.
Size of minimum sensing object when applying floating blanking function
Min. sensing object when applying floating blanking function
Setting (Note)
Invalid
1 beam channel 2 beam channels 3 beam channels
SF4B-F□(G) (Min. sensing object ø14 mm ø0.551 in) ø14 mm ø0.551 in ø24 mm ø0.945 in ø34 mm ø1.339 in ø44 mm ø1.732 in
SF4B-H□(G) (Min. sensing object ø25 mm ø0.984 in) ø25 mm ø0.984 in ø45 mm ø1.772 in ø65 mm ø2.559 in ø85 mm ø3.346 in
Correct mounting method
Dangerous part
Dangerous part
of machine
Protective structure
SF4B-A□(G) (Min. sensing object ø45 mm ø1.772 in) ø45 mm ø1.772 in ø85 mm ø3.346 in ø125 mm ø4.921 in ø165 mm ø6.496 in
Note: R
efer to p.10 for details of the floating blanking function. However, the
floating blanking function cannot be used with the SF4B-□-01, the
SF4B-□-03 and SF-C14EX-01.
For use in Europe (EU) (as EN 999)] (Also applicable to ISO 13855 / JIS B 9715)
Dangerous part
Sensing area
Wrong mounting method
Dangerous part
Sensing area
Dangerous part
Sensing
area
36
For intrusion direction perpendicular to the sensing area
• Equation 1
S=K×T+C
S: S
afety distance (mm)
Minimum required distance between the sensing area
surface and the dangerous parts of the machine
K: Intrusion velocity of operator’s body or object (mm/sec.)
Normally taken as 2,000 (mm/sec.) for calculation
T: R
esponse time of total equipment (sec.)
T = Tm + TSF4B
Tm: Maximum halting time of machinery (sec.)
TSF4B: Response time of the SF4B series (sec.)
C: Additional distance calculated from the size of the
minimum sensing object of the light curtain (mm)
However, the value of “C” cannot be less than 0.
C = 8 × (d – 14)
d: Minimum sensing object diameter (mm)
SF4B
PRECAUTIONS FOR PROPER USE
• For calculating the safety distance “S”, there are the
following five cases.
First calculate by substituting the value K = 2,000
(mm/sec.) in the equation above. Then, classify the
obtained value of “S” into three cases, 1) S < 100, 2)
100 ≤ S ≤ 500, and 3) S > 500. For Case 3) S > 500,
recalculate by substituting the value K = 1,600 (mm/
sec.). After that, classify the calculation result into
two cases, 4) S ≤ 500 and 5) S > 500. For details,
refer to the instruction manual enclosed with this
product. For calculating “Tm” (maximum halt time of
the machinery), use a special device called a “brake
monitor”.
When this device is used in the “PSDI mode”, an
appropriate safety distance “S” must be calculated.
For details, be sure to refer to the standards or
regulations applicable in each region or country.
• Equation
S=K×T+C
S: Safety distance (mm)
K: Intrusion velocity of operator’s body or object (mm/sec.)
Taken as 1,600 (mm/sec.) for calculation
T: Response time of total equipment (sec.)
T = Tm + TSF4B
Tm: Maximum halting time of machinery (sec.)
TSF4B: Response time of the SF4B series (sec.)
C: Additional distance calculated from the size of the
minimum sensing object of the light curtain (mm)
C = 850 (mm) (Constant)
For use in the United States of America (as per ANSI B11.19)
• Equation 2
S = K× (TS + TC + TSF4B + Tbm) + Dpf
S: Safety distance (mm)
Minimum required distance between the sensing area
surface and the dangerous parts of the machine
K: Intrusion velocity {Recommended value in OSHA is 63
(inch/sec.) ≈ 1,600 (mm/sec.)}
ANSI B11.19 does not define the intrusion velocity
“K”. When determining “K”, consider possible factors
including physical ability of operators.
TS: Halting time calculated from the operation time of the
control element (air valve, etc.) (sec.)
TC: Maximum response time of the control circuit required
for functioning the brake (sec.)
TSF4B: Response time of light curtain (sec.)
Tbm: Additional halting time tolerance for the brake
monitor (sec.)
The following equation holds when the machine is
equipped with a brake monitor.
Tbm = Ta – (Ts + Tc)
Ta: Setting time of brake monitor (sec.)
When the machine is not equipped with a brake
monitor, it is recommended that 20 % or more of
(Ts + Tc) is taken as additional halting time.
Dpf: Additional distance calculated from the size of the
minimum sensing of the
SF4B-F□(G): Dpf = 23.8 mm 0.937 in
SF4B-H□(G): Dpf = 61.2 mm 2.409 in
SF4B-A□(G): Dpf = 129.2 mm 5.087 in
Dpf =
3.4 × (d – 0.276) (inch)
≈ 3.4 × (d – 7) (mm)
d: Minimum sensing object diameter 0.552 (inch) ≈ 14 (mm) SF4B-F□(G)
Minimum sensing object diameter 0.985 (inch) ≈ 25 (mm) SF4B-H□(G)
Minimum sensing object diameter 1.772 (inch) ≈ 45 (mm) SF4B-A□(G)
Output waveform [Control outputs (OSSD 1, OSSD 2) ON]
• Refer to the SF4B manual for details.
Influence of reflective surfaces
Refer to the manual on our website for details.
Handy-controller
This device enables to set each function
using the handy-controller SFB-HC (optional).
(However, a handy-controller cannot be used
with the SF4B-□-01, the SF4B-□-03
and the SF-C14EX-01.) Among the functions,
the contents related to the safety distance such
as the size of the minimum sensing object and
response time are varied depending on the
setting condition. When setting each function,
re-calculate the safety distance, and make
enough space larger than the calculated safety
distance. Failure to do so might cause the
accident that the device cannot stop quickly
before reaching the dangerous area of the
machinery, resulting in the serious injury or
death.
• Refer to the instruction manual enclosed with the
handy-controller for details of the function settings for
using handy-controller SFB-HC (optional).
Troubleshooting
• Refer to the SF4B manual for details.
Corner mirror
• Be sure to carry out maintenance while
referring to the instruction manual for the
SF4B series of light curtains.
• Do not use if dirt, water, or oil, etc. is
attached to the reflective surface of this
product. Appropriate sensing range may not
be maintained due to diffusion or refraction.
• Make sure that you have read the instruction
manual for the corner mirror thoroughly
before setting up the corner mirrors and
light curtains, and follow the instructions
given. If the equipment is not set up correctly
as stipulated in the instruction manual,
incident light errors may result in unexpected
situations which may result in serious injury
or death.
• Please download the instruction manuals
from our website.
• Light curtain SF4B series cannot be used
as a retroreflective type. Avoid installing the
light curtain as a retroreflective type when
this product is applied.
• The mirror part of this product is made of
glass. Note that if it is broken, the glass
shards may fly apart.
• Do not use if crack or breakage appears on
the reflective surface of this product. Proper
sensing range may not be maintained due to
diffusion or refraction.
If crack or breakage appears on the
reflective surface of this product, replace the
product.
• When adjusting beam channels with a laser
alignment tool, etc., take sufficient care that
the laser beam reflected by this product does
not enter the eyes.
• Failure to follow the above items may result
in death or serious injury.
• Refer to the SF4B manual for details.
37
SF4B
DIMENSIONS (Unit: mm in)
The CAD data in the dimensions can be downloaded from our website.
SF4B-□
Not available for the robust type SF4B-□G Light curtain
Assembly dimensions
Mounting drawing for the light curtains using the standard mounting brackets MS-SFB-1 (optional) and the intermediate
supporting brackets.
43
1.693
42
1.654
30 1.181
15 0.591
28 1.102
18 0.709
5.5 0.217
28 1.102
18 0.709
5.5 0.217
42
1.654
43
1.693
30 1.181
15 0.591
5.5
1.5 0.217
0.059
50
1.969
5.5
0.217 1.5
0.059
50
1.969
30 1.181
18 0.709
A BC
Display
section
50
1.969
E
2
0.079
D
G
19
0.748
H 5
0.197
50
1.969 86.6
E 3.409
2
0.079
D
70.5
2.776
5
0.197
Emitter
Model No.
SF4B-F31□ SF4B-H16□ SF4B-A8□
SF4B-F39□ SF4B-H20□ SF4B-A10□
SF4B-F47□ SF4B-H24□ SF4B-A12□
SF4B-F55□ SF4B-H28□ SF4B-A14□
SF4B-F63□ SF4B-H32□ SF4B-A16□
SF4B-F71□ SF4B-H36□ SF4B-A18□
SF4B-F79□ SF4B-H40□ SF4B-A20□
SF4B-F95□ SF4B-H48□ SF4B-A24□
SF4B-F111□ SF4B-H56□ SF4B-A28□
SF4B-F127□ SF4B-H64□ SF4B-A32□
38
BC A
–
SF4B-H72□ SF4B-A36□
–
SF4B-H80□ SF4B-A40□
–
SF4B-H88□ SF4B-A44□
–
SF4B-H96□ SF4B-A48□
34.2
1.346
230
9.055
310
12.205
390
15.354
470
18.504
550
21.654
630
24.803
710
27.953
790
31.102
950
37.402
1,110
43.701
1,270
50.000
1,430
56.299
1,590
62.598
1,750
68.898
1,910
75.197
B
270
10.630
350
13.780
430
16.929
510
20.079
590
23.228
670
26.378
750
29.528
830
32.677
990
38.976
1,150
45.276
1,310
51.575
1,470
57.874
1,630
64.173
1,790
70.472
1,950
76.772
Total
length
C
286
11.260
366
14.406
446
17.559
526
20.709
606
23.858
686
27.008
766
30.157
846
33.307
1,006
39.606
1,166
45.905
1,326
52.505
1,486
58.504
1,646
64.803
1,806
71.102
1,966
77.401
Display
section
F
86.6
3.409
70.5
2.776
5 0.197
50
1.969
AC B
86.6
3.409
Receiver
A
SF4B-F23□ SF4B-H12□ SF4B-A6□
2
0.079
D
Protective
height
Mounting
Main body pitch
length
5.5
0.217
28
1.102
Display
section
50
1.969
E
19
0.748
30 1.181
18 0.709
5.5 0.217
50
1.969
F
F
43
1.693
1.5
0.059
Display
section
F
27
1.063
50
1.969
50
1.969
50
1.969
C BA
28
1.102
28 1.102
14 0.551
1.5
0.059
30
1.181
50
1.969
70.5
2.776
28
1.102
28 1.102
14 0.551
5.5 0.217
5.5
0.217
30
28
1.181 1.102
86.6
3.409
27
1.063
43
1.693
G
70.5
2.776
H
5
0.197
50
1.969
E
2
0.079
D
34.2
1.346
Emitter
Receiver
Intermediate supporting
bracket mounting pitch
Beam
pitch
First
beam
channel
position
G
H
10
0.394
20
0.787
40
1.575
5
0.197
5
0.197
15
0.591
D
E
Model No.
F
-
-
-
SF4B-F□
-
-
-
SF4B-H□
-
-
-
SF4B-A□
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
390
15.354
470
18.504
550
21.654
418
16.457
472
18.583
525
20.669
433
17.047
473
18.622
842
33.150
948
37.323
1,055
41.535
870
34.252
950
37.402
-
1,308
51.496
1,428
56.220
SF4B
DIMENSIONS (Unit: mm in)
The CAD data in the dimensions can be downloaded from our website.
SF4B-□
Not available for the robust type SF4B-□G Light curtain
Assembly dimensions
Mounting drawing for the light curtains using the dead zoneless brackets MS-SFB-3 (optional) and the intermediate
supporting brackets.
43
1.693
34
1.339
50
1.969
42
1.654
3
15
0.591 0.118
21 0.827
26 1.024
1.5 3 0.118
0.059
50 1.969
30
1.181
28 1.102
25 0.984
5.5
0.217
50
1.969
43
42
1.693
34
28 1.102 1.654
1.339
15
3
25 0.984
0.118 0.591
21 0.827
26 1.024
5.5
0.217
28
1.102
N
Display
section
Display
section
L
19
0.748
50
1.969
14.5 0.571
Emitter
Model No.
SF4B-F23□ SF4B-H12□ SF4B-A6□
SF4B-F31□ SF4B-H16□ SF4B-A8□
SF4B-F39□ SF4B-H20□ SF4B-A10□
SF4B-F47□ SF4B-H24□ SF4B-A12□
SF4B-F55□ SF4B-H28□ SF4B-A14□
SF4B-F63□ SF4B-H32□ SF4B-A16□
SF4B-F71□ SF4B-H36□ SF4B-A18□
SF4B-F79□ SF4B-H40□ SF4B-A20□
SF4B-F95□ SF4B-H48□ SF4B-A24□
SF4B-F111□ SF4B-H56□ SF4B-A28□
SF4B-F127□ SF4B-H64□ SF4B-A32□
–
SF4B-H72□ SF4B-A36□
–
SF4B-H80□ SF4B-A40□
–
SF4B-H88□ SF4B-A44□
–
SF4B-H96□ SF4B-A48□
38
1.496
19
0.748
Protective
height
Main body
length
MS-SFB-3
Mounting pitch
A
J
K
230
9.055
310
12.205
390
15.354
470
18.504
550
21.654
630
24.803
710
27.953
790
31.102
950
37.402
1,110
43.701
1,270
50.000
1,430
56.299
1,590
62.598
1,750
68.898
1,910
75.197
209
8.228
289
11.378
369
14.528
449
17.677
529
20.827
609
23.976
689
27.126
769
30.276
929
36.575
1,089
42.874
1,249
49.173
1,409
55.472
1,569
61.772
1,729
68.071
1,889
74.370
201
7.913
281
11.063
361
14.213
441
17.362
521
20.512
601
23.661
681
26.811
761
29.961
921
36.260
1,081
42.559
1,241
48.858
1,401
55.157
1,561
61.457
1,721
67.756
1,881
74.055
25
14
0.551 0.984
50
1.969
43
1.693
50
5.5 1.969
0.217
2 0.079
34.2
1.346
50
1.969
Display
section
N
50
1.969
M
L
70.5
2.776
70.5
2.776
G
30 1.181
3 0.118
21 0.827
26 1.024
3 0.118
86.6
3.409
86.6
3.409
14.5
38 H0.571
1.496
Receiver
27
1.063
A JK
Display
section
L
19
0.748
28
1.102
33
1.299
KJ A
50
1.969
M
70.5
2.776
28
1.102
33 1.299
14 0.551
5.5
0.217
1.5
0.059
N
86.6
3.409
L
G
38 H 14.5
1.496 0.571
50
1.969
N
50
86.6 1.969
3.409 M
70.5
2.776
50
1.969 5.5
0.217
2 0.079
34.2
1.346
50
1.969
AJ K
27
1.063
30 1.181
25 0.984
5.5
0.217
1.5
0.059
3 0.118
5.5 50 1.969
0.217
2 0.079
19 0.748
KJ A
3
0.118
21 0.827
26 1.024
3 0.118 1.5
0.059
5.5 0.217
50
1.969
50
1.969
43
1.693
14.5 0.571 38
1.496
19
0.748
Emitter
Receiver
Intermediate supporting
bracket mounting pitch
Beam
pitch
First
beam
channel
position
G
H
10
0.394
20
0.787
40
1.575
5
0.197
5
0.197
15
0.591
L
M
Model No.
N
-
-
-
SF4B-F□
-
-
-
SF4B-H□
-
-
-
SF4B-A□
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
370
14.567
450
17.717
530
20.866
398
15.669
452
17.795
505
19.882
413
16.260
453
17.835
822
32.362
928
36.535
1,035
40.748
850
33.465
930
36.614
-
1,288
50.709
1,408
55.433
39
SF4B
DIMENSIONS (Unit: mm in)
The CAD data in the dimensions can be downloaded from our website.
SF4B-□G
Not available for the robust type SF4B-□G Light curtain
Assembly dimensions
Mounting drawing for light curtains using the standard mounting brackets MS-SF4BG-1 (optional) and the intermediate
supporting brackets.
34.5 1.358
36 1.417
18 0.709
15 0.591
55.5
2.185
42
1.654
4
0.158
55.5
5 2.185
0.197
4
0.158
5 0.197
10
0.394
45
1.772
6
0.236
46
1.811
Protective
height
6
0.236
5.4
0.213
5.4
0.213 6
EDCB A
0.236
G
F
M
46
J1.811
6
0.236
5.4
0.213
H
N
45
1.772
57
2.244
10
0.394
5.4
5.4
0.213 0.213
9
9
0.354 0.354
6.5
0.256
8
0.315
9
0.354
K
6 0.236
5.4
0.213
5.4
0.213
6.5
0.256
8
0.315
6 0.236
A BCDE
46 G
1.811J
46
J1.811
6 0.236
5.4
0.213
K
5.4
0.213
5.4
0.213
6 0.236
6 0.236
6.5
0.256
8
0.315
5.4
0.213
6
0.236
F
M
H
6
0.236
5.4
0.213
N
Emitter
Protective
height
6.5
0.256
8
0.315
B CDE E DCB
A
A
6.5
0.256
F
N
Beam
pitch
Mounting
pitch
F
M
M
57
2.244
45 1.772
57
2.244
46
1.811
6.5
0.256
6 0.236
9
G 0.354
L
6 0.236
6.5
0.256
6 0.236
5.4
0.213
5.4
0.213
8
0.315
9
0.354 G
L
8 0.315
6
0.236
46
1.811J
5.4
0.213
8
0.315
H
K
N
45 1.772
5.5
0.217
24
0.945
Receiver
Total
length
Intermediate supporting
bracket mounting pitch
A
SF4B-F□G
SF4B-A□G
SF4B-H□G
B
C
D
E
F
G
H
J
K
L
SF4B-F23G SF4B-H12G SF4B-A6G
220 8.661
200 7.874
244 9.606 279 10.984 313 12.323 334 13.150
-
-
-
-
-
-
SF4B-F31G SF4B-H16G SF4B-A8G
300 11.811
280 11.024
324 12.756 359 14.134 393 15.472 414 16.299
-
-
-
-
-
-
SF4B-F39G SF4B-H20G SF4B-A10G
380 14.961
360 14.173
404 15.906 439 17.283 473 18.622 494 19.449
-
-
-
-
-
-
SF4B-F47G SF4B-H24G SF4B-A12G
460 18.110
440 17.323
484 19.055 519 20.433 553 21.772 574 22.598
-
-
-
-
-
-
SF4B-F55G SF4B-H28G SF4B-A14G
540 21.260
520 20.472
564 22.205 599 23.583 633 24.921 654 25.748
-
-
-
-
-
-
SF4B-F63G SF4B-H32G SF4B-A16G
620 24.409
600 23.622
644 25.354 679 26.732 713 28.071 734 28.898
-
-
-
-
-
-
SF4B-F71G SF4B-H36G SF4B-A18G
700 27.559
680 26.772
724 28.504 759 29.882 793 31.220 814 32.047
-
-
-
-
-
-
SF4B-F79G SF4B-H40G SF4B-A20G
780 30.709
760 29.921
804 31.654 839 33.031 873 34.370 894 35.197 441 17.362
-
414 16.299
-
419 16.496
-
SF4B-F95G SF4B-H48G SF4B-A24G
940 37.008
920 36.220
964 37.953 999 39.331 1,033 40.669 1,054 41.496 521 20.512
-
494 19.449
-
499 19.646
-
SF4B-F111G SF4B-H56G SF4B-A28G 1,100 43.307 1,080 42.520 1,124 44.252 1,159 45.630 1,193 46.968 1,214 47.795 601 23.661
-
574 22.598
-
579 22.795
-
SF4B-F127G SF4B-H64G SF4B-A32G 1,260 49.606 1,240 48.819 1,284 50.551 1,319 51.929 1,353 53.268 1,374 54.094 681 26.811
-
654 25.748
-
659 25.945
-
-
SF4B-H72G SF4B-A36G 1,420 55.905 1,400 55.118 1,444 56.850 1,479 58.228 1,513 59.567 1,534 60.394 520 20.472 1,001 39.409 493 19.409 974 38.346 498 19.606 979 38.543
-
SF4B-H80G SF4B-A40G 1,580 62.205 1,560 61.417 1,604 63.150 1,639 64.528 1,673 65.866 1,694 66.693 573 22.559 1,108 43.622 546 21.496 1,081 42.559 551 21.693 1,086 42.756
-
SF4B-H88G SF4B-A44G 1,740 68.504 1,720 67.716 1,764 69.449 1,799 70.827 1,833 72.165 1,854 72.992 627 24.685 1,215 47.835 600 23.622 1,188 46.772 605 23.819 1,193 46.968
-
SF4B-H96G SF4B-A48G 1,900 74.803 1,880 74.016 1,924 75.748 1,959 77.126 1,993 78.464 2,014 79.291 680 26.772 1,321 52.008 653 25.709 1,294 50.945 658 25.906 1,289 50.748
Model No.
SF4B-F□G
40
9
0.354
Emitter
Distance between beam axes Protective height
(Top / Bottom channels) (Main body length)
55.5 5 0.197
2.185
5.4
45
1.772 0.213
9
0.354
45
1.772
Receiver
Model No.
57
2.244
4
0.158
10
0.394
5.5
24
0.217
0.945
45
1.772
57
2.244
34.5 1.358
10
0.394
K
H
34.5 1.358
36 1.417 36 1.417
18 0.709 18 0.709
15 0.591 15 0.591
57
2.244
4
0.158
5
0.197 55.5
2.185
46
1.811
46
1.811
9
0.354
L L
6.5
0.256
8
0.315
45
1.772
6
0.236
5.5
5.5
0.217 0.217
Beam
pitch
34.5 1.358
36 1.417
18 0.709
15 0.591
42
1.654
Beam pitch
First beam
channel position
M
N
10 0.394
11.8 0.465
SF4B-H□G
20 0.787
11.8 0.465
SF4B-A□G
40 1.575
21.8 0.858
SF4B
DIMENSIONS (Unit: mm in)
The CAD data in the dimensions can be downloaded from our website.
SF4B-□G
Not available for the robust type SF4B-□G Light curtain
Assembly dimensions
Mounting drawing for light curtains using the Dead zoneless mounting brackets MS-SF4B-3 (optional) and the intermediate
supporting brackets.
9
0.354
55.5
2.185
42
1.654
6
0.236
34.5
1.358
55.5
2.185
42
1.654
9
0.354
10.5
0.413
6
0.236 5.4
0.213
6
0.236
55.5
2.185
42
1.654
8 0.315
6.7
0.264
55.5
2.185
42
1.654
9 0.354
8
0.315
6.5
0.256
C
G
8
0.315
6.5
0.256
6 0.236
6
0.236
46
1.811
9
0.354
5.4 0.213 C
5.4 0.213
8
0.315
6.5
0.256
6 0.236
J
C
Protective
height
E
E
A B B A
5.4 H
0.213
5.4
0.213
9
103 0.354
4.055
16
0.630
D
Beam
pitch
K
5.3 107
0.209 4.213
34.3
1.350
48
1.890
L
34.5
1.358
68.8
2.709
(
K
6 0.236
6
0.236 J
46
1.811
5.4
0.213 H
5.4
0.213
34.3
1.350
(
5.4
6 0.213
0.236
8
0.315
Q
6
0.236
5.4
0.213
46
1.811
P
6
0.236
5.4
0.213
6.5
0.256 C
9
0.354
Protective
height
E
BA
AB
E
5.4
0.213
8 0.315
6.5
C 0.256
9
0.354 N
9
0.354
9
0.354 103
4.055
5.4
0.213
6
0.236
5.4
T
0.213
6 50.5
0.236 1.988
R
Beam
pitch
D
D
K
9
0.354
K
53
2.087
34.5
1.358
L
68.8 )
(2.709
34.3
1.350
34.3
1.350
L
68.8 )
(2.709
Emitter
Distance between beam axes Protective height Mounting
(Top / Bottom channels) (Main body length) pitch
U
5.4 6 0.236 C
0.213
6
46
0.236
1.811
S
6.5 0.256
8 0.315
M
50.5
1.988
5.4
0.213
5.4 6 0.236
0.213
6
46
0.236
1.811
6.5
0.256
Receiver
Model No.
6
0.236
9 0.354
6.7
0.264
8
0.315
48
1.890
)
Emitter
6
0.236
5.4
0.213
50.5
1.988
5.3 107
0.209 4.213
57
6 5.4
2.244 0.236
0.213
9
103 0.354
4.055
16
0.630
34.5
1.358
68.8
2.709
)
5.4 0.213
5.4 0.213
9
0.354
F 24
0.945
5.4
0.213
D
L
9
0.354
8
G
0.315
6.5
0.256
6
0.236
46
1.811
9
0.354
24
F 0.945
5.4
0.213
5.4
0.213 C
6 5.4
6 0.236
C 0.236 0.213
6 5.4
6
0.236 0.213
0.236
46
1.811 46
1.811
10.5
0.413
6
5.4
0.213 0.236
9
0.354
50.5
1.988
5.4 0.213
34.5
1.358
8
0.315
6.7
0.264
5.4
0.213
6.7
34.3 0.264
1.350
48
1.890
8
0.315
Receiver
Intermediate supporting
bracket mounting pitch
A
SF4B-F□G
SF4B-A□G
SF4B-H□G
SF4B-F23G SF4B-H12G SF4B-A6G
220 8.661
SF4B-F31G SF4B-H16G SF4B-A8G
B
C
D
E
F
G
H
J
M
N
P
Q
R
S
T
U
200 7.874
244 9.606
64.5 2.539
-
-
-
-
-
-
-
-
-
-
-
-
-
-
300 11.811
280 11.024
324 12.756
144.5 5.689
-
-
-
-
-
-
-
-
-
-
-
-
-
-
SF4B-F39G SF4B-H20G SF4B-A10G 380 14.961
360 14.173
404 15.906
224.5 8.839
-
-
-
-
-
-
-
-
-
-
-
-
-
-
SF4B-F47G SF4B-H24G SF4B-A12G
460 18.110
440 17.323
484 19.055 304.5 11.988
-
-
-
-
-
-
-
-
-
-
-
-
-
-
SF4B-F55G SF4B-H28G SF4B-A14G 540 21.260
520 20.472
564 22.205 384.5 15.138
-
-
-
-
-
-
-
-
-
-
-
-
-
-
SF4B-F63G SF4B-H32G SF4B-A16G 620 24.409
600 23.622
644 25.354 464.5 18.287
-
-
-
-
-
-
-
-
-
-
-
-
-
-
SF4B-F71G SF4B-H36G SF4B-A18G
700 27.559
680 26.772
724 28.504 544.5 21.437
-
-
-
-
-
-
-
-
-
-
-
-
-
-
SF4B-F79G SF4B-H40G SF4B-A20G 780 30.709
760 29.921
804 31.654 624.5 24.587 414 16.299
-
333 13.110
-
288 11.339
-
289 11.378
-
330 12.992
-
383 15.079
-
347 13.661
-
SF4B-F95G SF4B-H48G SF4B-A24G 940 37.008
920 36.220
964 37.953 784.5 30.886 494 19.449
-
413 16.260
-
368 14.488
-
369 14.528
-
410 16.142
-
463 18.228
-
427 16.811
-
SF4B-F111G SF4B-H56G SF4B-A28G 1,100 43.307 1,080 42.520 1,124 44.252 944.5 37.185 574 22.598
-
493 19.409
-
448 17.638
-
449 17.677
-
490 19.291
-
543 21.378
-
507 19.961
-
SF4B-F127G SF4B-H64G SF4B-A32G 1,260 49.606 1,240 48.819 1,284 50.551 1,104.5 43.484 654 25.748
-
573 22.559
-
528 20.787
-
529 20.827
-
570 22.441
-
623 24.528
-
587 23.110
-
-
SF4B-H72G SF4B-A36G 1,420 55.905 1,400 55.118 1,444 56.850 1,264.5 49.783 493 19.409 974 38.346 412 16.220 893 35.157 367 14.449 848 33.386 368 14.488 849 33.425 409 16.102 890 35.039 462 18.189 943 37.126 426 16.772 907 35.709
-
SF4B-H80G SF4B-A40G 1,580 62.205 1,560 61.417 1,604 63.150 1,424.5 56.083 546 21.496 1,081 42.559 465 18.307 1,000 39.370 420 16.535 955 37.598 421 16.575 956 37.638 462 18.189 997 39.252 515 20.276 1,050 41.339 479 18.858 1,014 39.921
-
SF4B-H88G SF4B-A44G 1,740 68.504 1,720 67.716 1,764 69.449 1,584.5 62.382 600 23.622 1,188 46.772 519 20.433 1,107 43.583 474 18.661 1,062 41.811 475 18.701 1,063 41.850 516 20.315 1,104 43.465 569 22.402 1,157 45.551 533 20.984 1,121 44.134
-
SF4B-H96G SF4B-A48G 1,900 74.803 1,880 74.016 1,924 75.748 1,744.5 68.681 653 25.709 1,294 50.945 572 22.520 1,213 47.756 527 20.748 1,168 45.984 528 20.787 1,169 46.024 569 22.402 1,210 47.638 622 24.488 1,263 49.724 586 23.071 1,227 48.307
Model No.
SF4B-F□G
Beam pitch
First beam
channel position
K
L
10 0.394
11.8 0.465
SF4B-H□G
20 0.787
11.8 0.465
SF4B-A□G
40 1.575
21.8 0.858
41
SF4B
DIMENSIONS (Unit: mm in)
The CAD data in the dimensions can be downloaded from our website.
SF4B-□
Not available for the robust type SF4B-□G Light curtain
Protection bar set MC-SFBH-□ assembly dimensions
Mounting drawing for the light curtain on which the front protection
unit (MC-SFBH-□) is mounted.
MC-SFBH-□(L)
Protection bar set for rear / side mounting
MC-SFBH-□-T assembly dimensions
MC-SFBH-□(R)
Mounting drawing for the light curtain on which the front
protection unit (MC-SFBH-□-T) is mounted.
Rear mounting
MC-SFBH-□-T(L)
D
A B C
C B A
5
0.197
10
0.394
10
0.394
43.5
1.713
57.5
2.264
43
1.693
43.5
1.713
57.5
2.264
72.7
2.862
72.7
2.862
10
0.394
43
1.693
Applicable light curtain model No.
MC-SFBH-12(-T) SF4B-F23□ SF4B-H12□ SF4B-A6□
MC-SFBH-16(-T) SF4B-F31□ SF4B-H16□ SF4B-A8□
MC-SFBH-20(-T) SF4B-F39□ SF4B-H20□ SF4B-A10□
MC-SFBH-24(-T) SF4B-F47□ SF4B-H24□ SF4B-A12□
MC-SFBH-28(-T) SF4B-F55□ SF4B-H28□ SF4B-A14□
MC-SFBH-32(-T) SF4B-F63□ SF4B-H32□ SF4B-A16□
MC-SFBH-36(-T) SF4B-F71□ SF4B-H36□ SF4B-A18□
MC-SFBH-40(-T) SF4B-F79□ SF4B-H40□ SF4B-A20□
MC-SFBH-48(-T) SF4B-F95□ SF4B-H48□ SF4B-A24□
MC-SFBH-56(-T) SF4B-F111□ SF4B-H56□ SF4B-A28□
MC-SFBH-64(-T) SF4B-F127□ SF4B-H64□ SF4B-A32□
MC-SFBH-72(-T)
–
SF4B-H72□ SF4B-A36□
MC-SFBH-80(-T)
–
SF4B-H80□ SF4B-A40□
MC-SFBH-88(-T)
–
SF4B-H88□ SF4B-A44□
MC-SFBH-96(-T)
–
SF4B-H96□ SF4B-A48□
D
D
A B C
5
0.197
5
0.197
10
0.394 10
0.394
13 Material: Mounting bracket ···Die-cast zinc alloy 13
Protection bar·········Aluminum
0.512
0.512
Two brackets (one pc. each of R type and L type),
one protection bar
Two pcs. each of M5 (length 16 mm 0.630 in)
hexagon-socket-head bolts, M5 (length 20 mm 0.787 in)
hexagon-socket-head bolt are attached.
Model No.
MC-SFBH-□-T(R)
10
0.394
60.9
2.398
46.9
1.846
73.7
2.902
44.2
1.740
B
C
D
230
9.055
310
12.205
390
15.354
470
18.504
550
21.654
630
24.803
710
27.953
790
31.102
950
37.402
1,110
43.701
1,270
50.000
1,430
56.299
1,590
62.598
1,750
68.898
1,910
75.197
279
10.984
359
14.134
439
17.283
519
20.433
599
23.583
679
26.732
759
29.882
839
33.031
999
39.331
1,159
45.630
1,319
51.929
1,479
58.228
1,639
64.527
1,799
70.827
1,959
77.126
296
11.654
376
14.803
456
17.953
536
21.102
616
24.252
696
27.402
776
30.551
856
33.701
1,016
40.000
1,176
46.299
1,336
52.598
1,496
58.898
1,656
65.197
1,816
71.496
1,976
77.795
250
9.843
330
12.992
410
16.142
490
19.291
570
22.441
650
25.591
730
28.740
810
31.890
970
38.189
1,130
44.488
1,290
50.787
1,450
57.087
1,610
63.386
1,770
69.685
1,930
75.984
C B A
D
E
44.2
1.740
D
10
0.394
A B C
5
0.197
F
73.7
2.902
73.7
2.902
View E
10
0.394
MC-SFBH-□-T(R)
5
0.197
27.7
1.091
60.9
2.398
73.7
2.902
Side mounting
MC-SFBH-□-T(L)
A
10
0.394
46.9
1.846
10
0.394
10
0.394
View F
10
0.394
46.9
1.846
61.9
61.9
2.437
2.437
Material: Mounting bracket ···Iron (Trivalent chrome plated)
Protection bar·········Aluminum
46.9
1.846
Two brackets (one pc. each of R type and L type),
one protection bar
Two pcs. each of M5 (length 18 mm 0.709 in)
hexagon-socket-head bolts, M5 (length 20 mm 0.787 in)
hexagon-socket-head bolt are attached.
42
27.7
1.091
SF4B
DIMENSIONS (Unit: mm in)
The CAD data in the dimensions can be downloaded from our website.
RF-SFBH-□
Corner mirror (Optional)
17.5
6
0.689 0.236
18 0.709
6 0.236
t3
t 0.118
29
1.142
t 3 t 0.118
13
26
1.024 0.512
80
3.150
Effective
reflective
surface
29
1.142
ABC
18
0.709
6
0.236
RF-SFBH-32
RF-SFBH-36
E
RF-SFBH-40
RF-SFBH-48
(
RF-SFBH-56
)
46
1.811
72 2.835
RF-SFBH-64
45°
109 )
(4.219
104 )
(4.094
46
28
1.811
1.102
< When mounting at an angle of 45° >
Standard mounting bracket (Optional)
RF-SFBH-96
MS-SFB-1-T
E
F
Net weight
-
-
-
-
-
-
-
-
-
-
-
-
-
-
458 ±50
18.031 ±1.969
538 ±50
21.181 ±1.969
618 ±50
24.331 ±1.969
698 ±50
27.480 ±1.969
538 ±50
21.181 ±1.969
591 ±50
23.268 ±1.969
645 ±50
25.394 ±1.969
698 ±50
27.480 ±1.969
-
272
10.709
352
13.858
432
17.008
512
20.157
592
23.307
672
26.457
752
29.606
832
32.756
992
39.055
1,152
45.354
1,312
51.653
1,472
57.953
1,632
64.252
1,792
70.551
1,952
76.850
970 g
approx.
1,170 g
approx.
1,370 g
approx.
1,570 g
approx.
1,770 g
approx.
1,970 g
approx.
2,170 g
approx.
2,660 g
approx.
3,060 g
approx.
3,460 g
approx.
3,890 g
approx.
4,550 g
approx.
4,950 g
approx.
5,350 g
approx.
5,750 g
approx.
1,018 ±50
40.079 ±1.969
1,125 ±50
44.291 ±1.969
1,231 ±50
48.464 ±1.969
1,338 ±50
52.677 ±1.969
M8 mounting bracket (Optional)
8.4 0.331
3
33
1.299 0.118
24.5
0.965
30°
M5 (length
14 0.551)
10
0.394
5.5 0.217
28
1.102
R8.5 R0.335
M5 (length
6 0.236)
60°
6.2
0.244
10.8
0.425
28
1.102
14
0.551
28
1.102
6.1
0.240
8.7
0.343
3 0.118
M5
8.1
0.319
11
0.433
9.6
0.378
It is not available for the robust type SF4B-□G.
15
0.591
24.5
0.965
R8.5 R0.335
M5 (length
6 0.236)
10.8
0.425
15
0.591
M5 (length
14 0.551)
R16.6
R0.654
10
0.394
28
27.4 1.102
1.079
14
0.551
28
1.102
3
0.118
6.2
0.244
6.1
8.7 0.240
0.343
29
1.142
M5
11
0.433
8.1
0.319
9.6
0.378
Material: Die-cast zinc alloy
Four bracket set
Four M5 (length 18 mm 0.709 in)
hexagon-socket-head bolts are attached.
34.5
1.358
17.5
0.689
30°
R18.4
R0.724
Material: Die-cast zinc alloy
MS-SFBG-1
R
R
4-R2.8 R0.110
15 0.591
R18.4 R0.724
Four bracket set
Four M5 (length 18 mm 0.709 in)
hexagon-socket-head bolts are attached.
It is not available for the robust type SF4B-□G.
Standard L mounting bracket (Optional)
5 0.197
5.5 0.217
18
36
0.709 1.417
40°
2
0.079
55.5
2.185
RF-SFBH-88
R4.1 R0.161 (for sensor mounting)
8.2
5 0.197
0.323
5.5 0.217
18
0.709
28
1.102
10
0.394
RF-SFBH-80
D
8 0.315
20 15
28 0.787 0.591
1.102
R16.6 R0.654
RF-SFBH-72
8.4 0.331
3
0.118
60°
RF-SFBH-12
298
11.732
378
14.882
458
18.031
538
21.181
618
24.331
698
27.480
778
30.630
858
33.779
1,018
40.079
1,178
46.378
1,338
52.677
1,498
58.976
1,658
65.275
1,818
71.575
1,978
77.874
RF-SFBH-28
F
ø8.5
ø0.335
8 0.315
C
246
9.685
326
12.835
406
15.984
486
19.134
566
22.283
646
25.433
726
28.583
806
31.732
966
38.031
1,126
44.331
1,286
50.630
1,446
56.929
1,606
63.228
1,766
69.527
1,926
75.827
RF-SFBH-24
ø8.5
ø0.335
17.5
6
0.689 0.236
MS-SFB-1
B
236
9.291
316
12.441
396
15.591
476
18.740
556
21.890
636
25.039
716
28.189
796
31.339
956
37.638
1,116
43.937
1,276
50.236
1,436
56.535
1,596
62.835
1,756
69.134
1,916
75.433
RF-SFBH-20
D
64
2.520
A
RF-SFBH-16
26
13
1.024 0.512
106
4.173
Model No.
Material: SPCC
ø25
Four bracket set
ø0.984
40°
ø9.8
ø0.386
34.5
1.358
45
1.772
5.2
0.205
Eight M5 (length: 10
mm 0.394 in)
hexagon-socket-head
bolts are attached.
It is only available for
the robust
SF4B-□G.
43
SF4B
DIMENSIONS (Unit: mm in)
MS-SFB-2
The CAD data in the dimensions can be downloaded from our website.
Not available for the robust type SF4B-□G Intermediate supporting bracket (Accessory for light curtain)
9.5
0.374
5.8
0.228
12
0.472
4-R2.8
0.110
55
(2.165
)
2
0.079
43
1.693
15
0.591
9
0.354
24.8
0.976 14.8
0.583
5.5
0.217
5.5 0.217
33 1.299
50 1.969
60 2.362
32
1.260
13 0.512
8.3 0.327
2 0.079
R21.4 R0.843
30°
31
28
(1.220
) (1.102
)
12.5
0.492
2
0.079
4-R2.8
R0.110
2 0.079
8.8
0.346
22.2
0.874
M4
(length
12 0.472)
40 1.575
37 1.457
5.5
5.5
0.217 0.217
50 1.969
Material: Die-cast zinc alloy
52
2.047 41
1.614
13
0.512
10.5
0.413
Note: T
he intermediate supporting bracket (MS-SFB-2) is enclosed
with the following products. The quantity differs depending on
the product as shown below:
1 set: SF4B-F□ … Light curtain with 79 to 111 beam channels
SF4B-H□ … Light curtain with 40 to 56 beam channels
SF4B-A□ … Light curtain with 20 to 28 beam channels
2 sets: S
F4B-F127
SF4B-H□ … Light curtain with 64 to 80 beam channels
SF4B-A□ … Light curtain with 32 to 40 beam channels
3 sets: SF4B-H□ … Light curtain with 88 to 96 beam channels
SF4B-A□ … Light curtain with 44 to 48 beam channels
MS-SF4BG-2
Intermediate supporting bracket (Accessory for light curtain)
Rear mounting
ø5.4 ø0.213
mounting hole
Side mounting
18
0.709
5.4
0.213
23
0.906
8
0.315
26.5
1.043
34.5
1.358
43
1.693
(51.5)
(2.028)
8
0.315
9
10 0.354
0.394
5.4
0.213
10.5
0.413
ø5.4 ø0.213
mounting hole
10
0.394
43 (46.1)
34.5 1.693 (1.815)
1.358
18
0.709 8
0.315
5.4
0.213
23
0.906
56
8
2.205
0.315 32
1.260
9
10 0.354
0.394
44
8.5
0.335
9
0.354
9
0.354
10
0.394
26.5
1.043
5.4
0.213
10.5
0.413
(51.5)
43
34.5 1.693 (2.028)
1.358
18
0.709
18
0.709
56
2.205
32
1.260
34.5
1.358
43
1.693
(46.1)
(1.815)
Material: SPCC
Note: T
he intermediate supporting bracket MS-SF4BG-2 is enclosed
with the following products. The quantity differs depending on
the product as shown below:
1 set: SF4B-F□G … Light curtain with 79 to 127 beam channels
SF4B-H□G … Light curtain with 40 to 64 beam channels
SF4B-A□G … Light curtain with 20 to 32 beam channels
2 sets: S
F4B-H□G … Light curtain with 72 to 96 beam channels
SF4B-A□G … Light curtain with 36 to 48 beam channels
SF4B
DIMENSIONS (Unit: mm in)
The CAD data in the dimensions can be downloaded from our website.
MS-SFB-3
Not available for the robust type SF4B-□G Dead zoneless mounting bracket (Optional)
Main body
4-R4
6.8 R0.157
0.268
2-R4 4-R2.8
R0.157 R0.110
2-R3.3
R0.130
5.5
0.217
2-M5
19
0.748 15 10.8
50 41.2 25
0.591 0.425
1.969 1.622 0.984
9.5 0.374
55 2.165
9
5 0.354
0.197
34 1.339
2 0.079
8.5 0.335
11.6 0.457
12 0.472
2-M5
12
0.472
20 0.787
59.5 2.343
2-R3 R0.118
8.4 0.331
Mounting adjustment range
23
0.906
17 0.669
Note: T
he finger protection type has a beam pitch of 10 mm 0.394 in, which produces a dead
zone. Additional measures will be required, such as using a protection cover.
Dead zoneless mounting bracket (Optional)
It is only available for the robust SF4B-□G.
5.4
0.213
68.8 2.709
58.5 2.303
42.5 1.673
34.5 1.358
26.5 1.043
25
0.984
MS-SFB-4
8 0.315
10.5
0.413
5.4
0.213
3
0.118
63.5
2.500
74.5
2.933
85.5
3.366
18
69
7 0.709
2.717
0.276
45.5
1.791
(Sliding range)
Material: Die-cast zinc alloy
t 3.2
t 0.126
10.5
0.413
5.4
0.213
10
0.394
18
0.709
28
1.102
60°
20°
20°
10°
10°
18.1
0.713
8 0.315
52.5 2.067
5.5
0.217
ø5.4 ø0.213
62.6 2.465
66.7 2.626
60.5 2.382
50.7 1.996
10.5
0.413
Pitch adapter bracket (Optional)
Not available for the robust type SF4B-□G
8.4
0.331
26
1.024 13
0.512
5.4
0.213
43.2
1.701
26.5
1.043
15° 15°
The adjustment
range of the light
curtain angle is up to
±15 degrees.
38 1.496
50 1.969
9 0.354
9.5 0.374
9.5
0.374
R3
R0.118
8.4
0.331
ø5.5 ø0.217
20 0.787 (Note)
26
1.024
Main body
3
0.118
26
1.024
Spacer
3
21 0.118
0.827
MS-SF4BG-3
5.5
0.217
3
0.118
3-R1 R0.039
9
4.5
0.354 0.177
L-shaped mounting
5.5
0.217
M4
(length
10 0.394)
39 1.535
51 2.008
59.5 2.343
68 2.677
26
1.024 17.3 13
0.681 0.512
Four bracket set
Four M5 (length 25 mm 0.984 in)
hexagon-socket-head
bolts and four spacers are attached.
5.5
0.217
38
1.496
4 0.157
Material: Die-cast zinc alloy
26
1.024
40°
60°
Material: Dead zoneless mounting bracket ··· SPCC (Trivalent chrome plated)
Dead zoneless supporting bracket ··· PPS
34.5
1.358
30°
R8.5 R0.335
M5 (length
6 0.236)
15
0.591
M5 (length
14 0.551)
R18.4 R0.724
R16.6 R0.654
4-R2.8 R0.110
Four bracket set
Four M5 (length 18 mm 0.709 in)
hexagon-socket-head bolts are
attached.
6.1
10.8 0.240
0.425
6.2
0.244
28
1.102
14
0.551
28
1.102
8.1
0.319
8.7
0.343
4.7
0.185
M5
11
0.433
9.6
0.378
Mounting adjustment range
The adjustment
range of the light
curtain angle is up to
±10 degrees.
10° 10°
hexagon-socket-head bolts
[M5 (length 8 mm 0.315 in)]
45
SF4B
DIMENSIONS (Unit: mm in)
The CAD data in the dimensions can be downloaded from our website.
MS-SFB-4-T
Not available for the robust type SF4B-□G M8 pitch adapter bracket (Optional)
8.4
0.331
8 0.315
3
0.118
63.5
78 2.500
3.071
85.5
3.366
18
69
7 0.709
2.717
45.5
0.276
1.791
(Sliding range)
10
0.394
Material: Die-cast zinc alloy
10
0.394
28
1.102
60°
R8.5 R0.335
M5 (length
6 0.236)
30°
M5 (length
14 0.551)
15
0.591
R18.4 R0.724
28
1.102
R16.6 R0.654
14
0.551
28
1.102
Four bracket set
Four M5 (length 18 mm 0.709 in)
hexagon-socket-head bolts are attached.
2-R5 R0.197
10.8
0.425
6.1
0.240
8.7
0.343
4.7
0.185
11
0.433
M5
MS-SFB-7-T MS-SFB-1-T2 (Rear mounting)
Not available for the robust type SF4B-□G
2-R5
R0.197
Mounting adjustment range
25.25
0.994
15°
10
10
0.394 0.394
27.2
1.071
7.6
0.299
M5 (length
10 0.394)
8.1
0.319
9.6
0.378
M8 rear mounting bracket (Optional) M8 rear / side mounting brackets set (Optional)
8.5
0.335
40.6
(1.598
)
6.2
0.244
(
)
26
1.024
28
1.102
8
0.315
2.3
0.091
29
1.142
15°
17
0.669
The adjustment
range of the light
curtain angle is up
to ±15 degrees.
28
(1.811
)
R20.2
(R0.795
)
M5
Material: Iron (Trivalent chrome plated)
Four bracket set
Four M5 (length 18 mm 0.709 in)
hexagon-socket-head bolts are attached.
MS-SFB-8-T MS-SFB-1-T2 (Side mounting)
MS-SFB-8-T(R)
M5
4 0.157
M8 side mounting bracket (Optional) M8 rear / side mounting brackets set (Optional)
Not available for the robust type SF4B-□G
MS-SFB-8-T(L)
10.75
0.423
8
0.315
10.75
0.423
8
0.315
10
0.394
29
40.6
(1.598
) 1.142
10
7.6 0.394
0.299
2-R5 R0.197
(
28.35
1.116
(14.75
0.581 )
)
10
0.394
(
(
10
0.394
)
M5 (length
10 0.394)
28
1.811
46
2.3
0.091
33.5
1.319
2.3
0.091
15°
The adjustment
range of the light
curtain angle is up
to ±15 degrees.
7.6
0.299
(14.75
0.581 )
M5 (length
10 0.394)
33.5
1.319
15°
)
29
40.6
1.142 1.598
2-R5 R0.197
28.35
1.116
Mounting adjustment range
M5
4 0.157
R20.2
(R0.795
)
28
(1.811
)
Material: Iron (Trivalent chrome plated)
28
1.811
Four bracket
(two pcs. each of R type and L type) set
Four M5 (length 18 mm 0.709 in)
hexagon-socket-head bolts are attached.
SF4B
DIMENSIONS (Unit: mm in)
SF-C11
The CAD data in the dimensions can be downloaded from our website.
Control unit (Optional)
54.1
2.130
4
0.157
13
0.512
40
1.575
25
0.984
35
1.378
67.3
2.650
46
1.811
23
0.906
48.8
1.921
Control unit (Optional)
127
5.000
80
3.150
30
1.181
2-ø6 ø0.236
2-ø10 ø0.394
6
7 0.276 0.236
11.5
0.453
Receiver
side
connector
130
5.118
28
114
1.102
4.488 8
0.315
6
0.236
10
0.394
6.5
0.256
80
3.150
100
3.937
(
)
6.75
0.266
5
0.197
SF-C14EX(-01)
Application expansion unit (Optional)
6
0.236
34.5
1.358
35
1.378
67.3
2.650
4 0.157
3 × 5 = 15
3 × 0.197 = 0.591
130
5.118
36.5
1.437
36.5 34.2
1.437 1.346
Control unit (Optional)
4
0.157
81.4
135 3.205
(5.315
)
6
19.5 0.236
0.768
22 24.5 30.5
0.866 0.965 1.201
Suitable for 35 mm 1.378 in width DIN rail
SF-C13
21
0.827
8 0.315
54.1
2.130
40
1.575
Emitter side
connector
25
34.1
0.984 1.343
35
1.378
67.3
2.650
91.6
3.606
46
1.811
38.4 1.512
18 18.4
0.709 0.724
23 0.906
6.5
0.256
80
3.150
80.8
3.181
13
0.512
22.5
0.886
11
0.433
5
0.197
Suitable for 35 mm 1.378 in width DIN rail
SFB-HC
Receiver
side
connector
31.1
1.224
13
0.512
130
5.118
10
0.394
13.5
0.531
67.5
2.657
6.5
0.256
Emitter side
connector
3 × 6 = 18
3 × 0.236 = 0.709
130
5.118
SF-C12
10
0.394
Handy-controller (Optional)
80
3.150
99
3.898
Suitable for 35 mm 1.378 in width DIN rail
6.5
0.256
(
)
SFB-WY1
Y-shaped connector
65 2.559
30
1.181
23
0.906
25.4
1.000
ø6 ø0.236 cables,
0.5 m 1.640 ft long
ø9
ø0.354
FUNCTION
140
5.512
CANCEL
ENTER
66 2.598
22.5
0.886
13.5
0.531
41
1.614
ø14 45.8 31
ø0.551 1.803 1.220
Net weight: 35 g approx.
47
SF4B
DIMENSIONS (Unit: mm in)
SF-LAT-2N
The CAD data in the dimensions can be downloaded from our website.
Laser alignment tool (Optional)
SF-LAT-4BG
Laser alignment tool (Optional)
21
22.2
(0.827
) 0.874
ø12
ø0.472
(21)
22
(0.827) 0.866
66.5
2.618
18.75
0.738
28
1.102
20
0.787
5.3
0.209
ø12
ø0.472
31
1.220
20
0.787
48
1.890
66.5
2.618
1 0.039
15.8
0.622
62
2.441
92
3.622
92
3.622
It is not available for the robust SF4B-□G.
SF-IND-2
48
1.890
28
1.102
38
1.496
28
1.102
It is only available for the robust SF4B-□G.
Large display unit for light curtain (Optional)
22.8
0.898
18.3
0.720
25
0.984
35.5
40.1 1.398 23
1.579
0.906
4.6
0.181
18
0.709
28
1.102
5.5 0.217
ø3.6 ø0.142 cable,
3m 9.843 ft long
25.4
1.000
t 1.6 t 0.063
6.6 0.260
10.4 0.409
Material: Bracket ··· C
old rolled carbon steel
(SPCC)(Black chromate)
Enclosure ··· POM
Cover ··· Polycarbonate
Please contact ..........
Panasonic Electric Works SUNX Co., Ltd.
2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan
Telephone: +81-568-33-7211
Facsimile: +81-568-33-2631
Global Sales & Marketing Division
Telephone: +81-568-33-7861
Facsimile: +81-568-33-8591
panasonic.co.jp/id/pidsx/global
All Rights Reserved ©Panasonic Electric Works SUNX Co., Ltd. 2012
No. CE-SF4BV2-2-6 February, 2012
Specifications are subject to change without notice.
PRINTED IN JAPAN