SFS6-SFD

SF RELAYS ACCESSORIES Slim type (Sockets and DIN rail terminal sockets) TYPES 1. Sockets Type No. of poles 4 poles 6 poles PC board sockets Part No. SFS4-PS SFS6-PS Standard packing: Carton: 10 pcs.; Case: 100 pcs. 2. DIN rail terminal socket Type No. of poles Part No. Terminal sockets for spade and ring tongue terminals 4 poles 6 poles SFS4-SFD-R SFS6-SFD-R New Standard packing: Carton: 10 pcs.; Case: 100 pcs. Note: For previous products (spade tongue terminal dedicated terminal sockets), please order SFS4-SFD for 4 poles and SFS6-SFD for 6 poles. RATING Specifications Item Breakdown voltage (Initial) Insulation resistance (Initial) Max. carrying current Specifications Between each terminal: 2,500 Vrms for 1 min. (Detection current: 10mA) Min. 1,000MΩ (at 500V DC) Measurement at same location as “Breakdown voltage” section. 6 A (Reduce by 0.1 A/°C for temperatures 70 to 85°C 158 to 185°F) DIMENSIONS (mm inch) The CAD data of the products with a 1. PC board sockets (4 poles) (SFS4-PS) CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ External dimensions CAD Data PC board pattern (Bottom view) 50.0 1.969 10.16 4.1 .400 .161 15.0 .591 (6.93) (.273) 40.0 1.575 39.9 1.571 24.8 .976 3-3.2 .126 dia. (For M3 screw) Please use the screw with a stem length of 8 mm .315 inch. 10-1.1 .043 dia. 13.97 .550 5.08 .200 5.08 .200 11.43 .450 Tolerance: ±0.1 ±.004 (13) (.512) (13) (.512) 6.93 .273 0.8 .031 10.16 .400 0.4 .016 5.08 .200 11.43 .450 13.97 .550 5.08 .200 General tolerance: ±0.3 ±.012 Schematic (Bottom view) 1 3 4 7 8 2 5 6 9 10 1 3 4 7 8 2 5 6 9 10 Standard (When 2 Form A 2 Form B mounted) 1 3 4 7 8 2 5 6 9 10 (When 3 Form A 1 Form B mounted) 1 3 4 7 8 2 5 6 9 10 With LED indication (When 2 Form A 2 Form B mounted) 1 3 4 7 8 2 5 6 9 10 (When 3 Form A 1 Form B mounted) 1 3 4 7 8 2 5 6 9 10 With diode and LED indication type (When 2 Form A 2 Form B mounted) (When 3 Form A 1 Form B mounted) –1– ASCTB111E 201407-T SFS ACCESSORIES 2. PC board sockets (6 poles) (SFS6-PS) External dimensions CAD Data PC board pattern (Bottom view) 60.0 2.362 10.16 4.1 .400 .161 24.8 .976 49.9 1.965 3-3.2 .126 dia. (For M3 screw) Please use the screw with a stem length of 8 mm .315 inch. 15.0 .591 14-1.1 .043 dia. (6.93) (.273) 13.97 .550 5.08 .200 5.08 .200 5.08 .200 5.08 .200 11.43 .450 40.0 1.575 Tolerance: ±0.1 ±.004 (13) (.512) 6.93 .273 0.8 .031 10.16 .400 (13) (.512) 0.4 .016 5.08 .200 5.08 .200 5.08 .200 13.97 .550 5.08 .200 11.43 .450 General tolerance: ±0.3 ±.012 Schematic (Bottom view) 1 3 4 7 8 11 12 2 5 6 9 10 13 14 1 3 4 7 8 11 12 2 5 6 9 10 13 14 1 3 4 7 8 11 12 2 5 6 9 10 13 14 Standard (When 4 Form A 2 Form B mounted) 1 3 4 7 8 11 12 2 5 6 9 10 13 14 (When 5 Form A 1 Form B mounted) 1 3 4 7 8 11 12 2 5 6 9 10 13 14 (When 3 Form A 3 Form B mounted) 1 3 4 7 8 11 12 2 5 6 9 10 13 14 With LED indication (When 4 Form A 2 Form B mounted) 1 3 4 7 8 11 12 2 5 6 9 10 13 14 (When 5 Form A 1 Form B mounted) 1 3 4 7 8 11 12 2 5 6 9 10 13 14 (When 3 Form A 3 Form B mounted) 1 3 4 7 8 11 12 2 5 6 9 10 13 14 With diode and LED indication type (When 4 Form A 2 Form B mounted) (When 5 Form A 1 Form B mounted) (When 3 Form A 3 Form B mounted) 3. Terminal socket for spade and ring tongue terminals (For 4 poles finger protect type) External dimensions CAD Data Mounting hole dimensions 6.5 .256 2-M3.5 or 4 dia. hole 2-M.138 or .157 dia. hole R2.0 .079 14.5±0.2 .571±.008 M3 .118 screw 6.2±0.3 dia. .244±.012 dia. 75.0 2.953 80.0±0.2 3.150±.008 2-4×5 hole 6.3 .248 6.5 .256 +0.3 0 +.012 0 Tolerance: ±0.1 ±.004 Schematic (Top view) *62.4 58.9 *2.457 2.319 10 7 8 2 1 9 6 35.4 1.394 4.0 .157 22.4 .882 General tolerance: ±0.5 ±.020 * Reference value (when using DIN rail ATA48011) 5 4 3 Note: Ring tongue terminals cannot be used with conventional DIN rail terminal socket (SFS4-SFD). In use of a ring tongue terminals, please use SFS4-SFD-R. –2– ASCTB111E 201407-T SFS ACCESSORIES 4. Terminal socket for spade and ring tongue terminals (For 6 poles finger protect type) External dimensions CAD Data Mounting hole dimensions 2-M3.5 or 4 dia. hole 2-M.138 or .157 dia. hole 6.5 .256 22.0±0.2 .866±.008 R2.0 .079 M3 .118 screw 6.2±0.3 dia. .244±.012 dia. 75.0 2.953 2-4×5 hole 80.0±0.2 3.150±.008 6.5 .256 Tolerance: ±0.1 ±.004 6.3 +0.3 0 .248 +.012 0 Schematic (Top view) *62.4 58.9 *2.457 2.319 4.0 .157 35.4 1.394 29.8 1.173 General tolerance: ±0.5 ±.020 14 12 13 11 10 8 9 7 6 4 5 2 1 3 * Reference value (when using DIN rail ATA48011) Note: Ring tongue terminals cannot be used with conventional DIN rail terminal socket (SFS6-SFD). In use of a ring tongue terminals, please use SFS6-SFD-R. NOTES Installation 1) Attach directly to the chassis or use a DIN rail. (1) When attaching directly to chassis • Use a M3.5 screw, spring washer, and hex nut. • For the mounting pitch, refer to the dimensions. (2) When installing on a DIN rail • Use a 35 mm 1.378 inch wide DIN rail (DIN46277). • Install and remove as shown in the figures below. Pull Push Screwdriver DIN rail 2) Refer to the figure below for applicable wire-pressed terminals. Spade tongue terminal 6.3 mm max. 3 mm min. .248 inch max. .118 inch min. Ring tongue terminal 6.3 mm max. 3 mm min. .248 inch max. .118 inch min. –3– ASCTB111E 201407-T