TH-12CPS

Hot Melt Glue Detector 945 TH SERIES FIBER SENSORS Related Information ■■General terms and conditions.............. F-7 ■■General precautions....................... P.1501 ■■Sensor selection guide................... P.885~ LASER SENSORS PHOTOELECTRIC SENSORS Conforming to EMC Directive (TH-12CPS only) MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS panasonic.net/id/pidsx/global STATIC ELECTRICITY PREVENTION DEVICES LASER MARKERS PLC Quick, non-contact detection of hot melt glue (infrared) HUMAN MACHINE INTERFACES ORDER GUIDE ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS Type Appearance Sensor head Controller Sensing range Set model No. Output MACHINE VISION SYSTEMS Liquid Leak Detection Liquid Level Detection Water Detection Color Mark Detection Hot Melt Glue Detection Ultrasonic Small / Slim Object Detection Obstacle Detection Other Products TH 2 3 4 6 5 7 8 9 OU T1 10 OFD SET Mode Spot NPN output Wafer Detection PNP output Selection Guide 1 Long sensing range UV CURING SYSTEMS CH . SEN S. OU T2 SIZ E EXT . RU N SYN C. TH-11CS NPN open-collector transistor TH-12CS NPN open-collector transistor TH-12CPS PNP open-collector transistor 40 ±10 mm 1.575 ±0.394 in 1 2 3 4 5 6 Mode 7 8 9 OU T1 10 OFD SET CH . RU N SEN S. OU T2 SIZ E EXT . SYN C. 10 to 300 mm 0.394 to 11.811 in (Note) Note: Teaching is possible for this sensing range. However, the sensing range varies with the size of the sensing object and its temperature, ambient temperature, etc. A sensor head and its respective controller comprise a set. Make sure to use the sensor head and the controller specified in the set model No. together as a set. [Please refer to “SPECIFICATIONS (p.946, 947)” for more details.] Hot Melt Glue Detector TH SERIES SPECIFICATIONS 946 FIBER SENSORS TH-11CS Spot type LASER SENSORS PHOTOELECTRIC SENSORS Sensor head Model No. TH-11 MICRO PHOTOELECTRIC SENSORS TH-C1 AREA SENSORS Sensing range 40 ±10 mm 1.575 ±0.394 in Sensing object ø3 mm ø0.118 in or more hot melt glue (emissivity 0.9) at +85 °C +185 °F or more, under ambient temperature of +25 °C +77 °F (Note 2) LIGHT CURTAINS / SAFETY COMPONENTS Item Applicable controller Ambient temperature Visible targeting 0 to +50 °C +32 to +122 °F (No dew condensation), Storage: –10 to +60 °C +14 to +140 °F Red LED Material Enclosure: Polycarbonate, Front cover: Sapphire glass Weight Net weight: 77 g approx. MS-TH-1 (Sensor head mounting bracket): 1 set, TH-B1 (Heat shield): 1 pc. Accessories Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F. 2) A hot melt drop at +60 °C +140 °F or higher can be detected if it is ø5 mm ø0.197 in or more. Controller PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS Model No. Item Applicable sensor head Supply voltage Current consumption Outputs (OUT 1, OUT 2) Output operation Response time (operation freq.) Warm-up time Sensitivity setting Level storage function External channel select function Timer function Ambient temperature TH-C1 MEASUREMENT SENSORS TH-11 STATIC ELECTRICITY PREVENTION DEVICES 12 to 24 V DC ±10 % Ripple P-P 10 % or less 100 mA or less NPN open-collector transistor • Maximum sink current: 100 mA • Applied voltage: 30 V DC or less (between output and 0 V) • Residual voltage: 1 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current) OUT 1: ON when hot melt adhesive in detected (Max. 1 sec. approx.), OUT 2: ON when the evaluated result is NG (Max. 1 sec. approx.) 1 ms or less (1 to 200 Hz) 40 sec. approx. Teaching method (Push-button operation) Sensitivity levels of eight channels can be stored. Incorporated LASER MARKERS PLC HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Incorporated with approx. 40 ms fixed OFF-delay timer, switchable either effective or ineffective 0 to +50 °C +32 to +122 °F (No dew condensation), Storage: –10 to +60 °C +14 to +140 °F Material Enclosure: Heat-resistant ABS, Terminal cover: Heat-resistant ABS, Front cover: Polycarbonate Weight Net weight: 200 g approx. Note: Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F. Selection Guide Wafer Detection Liquid Leak Detection Liquid Level Detection Water Detection Color Mark Detection Hot Melt Glue Detection Ultrasonic Small / Slim Object Detection Obstacle Detection Other Products TH 947 FIBER SENSORS LASER SENSORS PHOTOELECTRIC SENSORS Hot Melt Glue Detector TH SERIES SPECIFICATIONS TH-12CS  TH-12CPS Long sensing range type Sensor head Model No. MICRO PHOTOELECTRIC SENSORS Item AREA SENSORS Applicable controllers LIGHT CURTAINS / SAFETY COMPONENTS Sensing range 10 to 300 mm 0.394 to 11.811 in (Note 2) Sensing object ø6 mm ø0.236 in (equivalent to 3 × 10 mm 0.118 × 0.394 in) or more hot melt glue (emissivity 0.9) at +100 °C +212 °F or more, under ambient temperature of +25 °C +77 °F PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS TH-12 TH-C2, TH-C2P Pollution degree 3 (Industrial environment) Ambient temperature 0 to +50 °C +32 to +122 °F (No dew condensation), Storage: –10 to +60 °C +14 to +140 °F Material Enclosure: Polycarbonate, Indicator: Polycarbonate, Lens: Silicone Weight Net weight: 120 g approx. MS-TH-2 (Sensor head mounting bracket): 1 set, TH-B2 (Heat shield): 1 pc., OS-TH12 (Slit mask): 1 pc. Accessories Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F. 2) Teaching is possible for this detection range. However, the detection range varies with the size of the sensing object and its temperature, ambient temperature, etc. Controllers Type STATIC ELECTRICITY PREVENTION DEVICES Item Model No. LASER MARKERS Supply voltage NPN output (for TH-12CS) TH-C2 TH-C2P TH-12 Applicable sensor head 12 to 24 V DC ±10 % Ripple P-P 10 % or less Current consumption PLC HUMAN MACHINE INTERFACES Outputs (OUT 1, OUT 2) ENERGY CONSUMPTION VISUALIZATION COMPONENTS Utilization category FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Output operation Response time (operation freq.) 100 mA or less NPN open-collector transistor • Maximum sink current: 100 mA • Applied voltage: 30 V DC or less (between output and 0 V) • Residual voltage: 1 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current) PNP open-collector transistor • Maximum source current: 100 mA • Applied voltage: 30 V DC or less (between output and +V) • Residual voltage: 2 V or less (at 100 mA source current) – DC-12 or DC-13 OUT 1: ON when hot melt adhesive is detected (Max. 1 sec. approx.), OUT 2: OFF when the evaluated result is NG (Max. 1 sec. approx.) Sensing distance 200 mm 7.874 in or less: 1 ms or less (1 to 200 Hz), Sensing distance 300 mm 11.811 in or less: 1.5 ms or less (1 to 100 Hz) Warm-up time 40 sec. approx. Sensitivity setting Teaching method (Push-button operation) Level storage function Sensitivity levels of eight channels can be stored. External channel select function Timer function Selection Guide Wafer Detection Ambient temperature Liquid Leak Detection EMC Material Water Detection Weight Color Mark Detection Hot Melt Glue Detection Ultrasonic Incorporated Incorporated with approx. 40 ms fixed OFF-delay timer, switchable either effective or ineffective Pollution degree Liquid Level Detection – Other Products TH 3 (Industrial environment) 0 to +50 °C +32 to +122 °F (No dew condensation), Storage: –10 to +60 °C +14 to +140 °F – EN 60947-5-2 Enclosure: Heat-resistant ABS, Terminal cover: Heat-resistant ABS, Front cover: Polycarbonate Net weight: 200 g approx. Net weight: 140 g approx. Note: Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F. PRECAUTIONS FOR PROPER USE Small / Slim Object Detection Obstacle Detection PNP output (for TH-12CPS) • Never use this product as a sensing device for personnel protection. • In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. Refer to p.1501 for general precautions. Hot Melt Glue Detector TH SERIES 948 I/O CIRCUIT AND WIRING DIAGRAMS FIBER SENSORS LASER SENSORS NPN output type I/O circuit diagram Controller / TH-C1, TH-C2 Load (Black) OUT 1 ZD1 Tr2 Load 100 mA MAX. (White) OUT 2 + - 12~24V DC ±10% (Blue) 0 V External synchronization (Gray) input (Note) Low: 0 to 1 V High: 4.5 to 30 V, or open *1 Channel No. (Orange) EXT. 1 External channel select inputs (Pink) EXT. 2 (Violet) EXT. 3 Internal circuit AREA SENSORS Specifying channel with external channel select inputs 100 mA MAX. ZD2 MICRO PHOTOELECTRIC SENSORS or (Brown)+V Tr1 Sensor circuit Non-voltage contact or NPN open-collector transistor Color code D PHOTOELECTRIC SENSORS *1 Users’ circuit Note: The external synchronization input is active Low. Input EXT.1 (Orange) EXT.2 (Pink) EXT.3 (Violet) 1 L H H 2 H L H 3 L L H 4 H H L 5 L H L 6 H L L 7 L L L 8 H H H L: Low (0 to 1 V), H: High (4.5 to 30 V, or open) Notes: 1) The channel can be specified from the front panel only when all external channel select inputs (EXT.1, EXT.2, and EXT.3) are High (corresponding to Channel No. 8). 2) The external channel select inputs take precedence over the front panel channel selection (except for Channel No. 8). 3) If channel specification is changed from front panel operation to external channel select inputs and Channel No. 8 is to be selected by the external channel call inputs, make sure to specify a channel other than No. 8 before setting all the external channel select inputs (EXT.1, EXT.2, EXT.3) to High. If this operation is not done, channel specification by front panel operation gets precedence. Symbols ... D: Reverse supply polarity protection diode ZD1, ZD2 : Surge absorption zener diode Tr1, Tr2 : NPN output transistor PNP output type I/O circuit diagram Specifying channel with external channel select inputs Controller / TH-C2P Color code D E Tr1 Channel No. (Brown) +V 100 mA max. + (Black) OUT1 Sensor circuit Tr2 100 mA max. (White) OUT2 Load - 12 to 24 V DC ±10 % Load (Blue) 0 V External synchronization (Gray) input (Note) *1 (Orange) EXT.1 *2 (Pink) EXT.2 (Violent) EXT.3 Internal circuit EXT.1 (Orange) EXT.2 (Pink) EXT.3 (Violet) 1 L H H 2 H L H 3 L L H 4 H H L 5 L H L 6 H L L 7 L L L 8 H H H L: Low (0 to 1 V), H: High (4.5 to 30 V, or open) External channel select inputs Users’ circuit Note: The external synchronization input is active High. Symbols ... D: Reverse supply polarity protection diode E: Surge absorption varistor Tr1, Tr2: PNP output transistor *1 Input Notes: 1) The channel can be specified from the front panel only when all external channel select inputs (EXT.1, EXT.2, and EXT.3) are High (corresponding to Channel No. 8). 2) The external channel select inputs take precedence over the front panel channel selection (except for Channel No. 8). 3) If channel specification is changed from front panel operation to external channel select inputs and Channel No. 8 is to be selected by the external channel call inputs, make sure to specify a channel other than No. 8 before setting all the external channel select inputs (EXT.1, EXT.2, EXT.3) to High. If this operation is not done, channel specification by front panel operation gets precedence. PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC ELECTRICITY PREVENTION DEVICES LASER MARKERS PLC HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Selection Guide Wafer Detection Liquid Leak Detection Liquid Level Detection Water Detection Color Mark Detection Hot Melt Glue Detection Ultrasonic Small / Slim Object Detection Obstacle Detection Other Products *2 Non-voltage contact or PNP open-collector transistor Non-voltage contact or NPN open-collector transistor or or Low: 0 to 1 V High: +V or open LIGHT CURTAINS / SAFETY COMPONENTS Low: 0 to 1 V High: 4.5 to 30 V, or open TH 949 The CAD data in the dimensions can be downloaded from our website. TH-11CS Spot type Controller / TH-C1 18 0.709 23 0.906 17 0.669 8 0.315 3 0.118 10 0.394 33 1.299 27 1.063 Center sensing position 6 0.236 2-ø3.4 ø0.134 mounting holes 3 8 0.118 0.315 ø4.2 ø0.165 cable, 2 m 6.562 ft long WIRE-SAVING SYSTEMS TH-12CS  TH-12CPS MEASUREMENT SENSORS Sensor head /TH-12 30 1.181 15 0.591 25 0.984 ENERGY CONSUMPTION VISUALIZATION COMPONENTS 6 0.236 2-ø3.4 ø0.134 mounting holes UV CURING SYSTEMS Color Mark Detection Hot Melt Glue Detection Ultrasonic 6 0.236 Other Products TH SET Mode 1 2 3 4 5 6 SYNC. EXT. CH. SIZE RUN OUT2 Mode 6 0.236 Suitable for 35 mm 1.378 in width DIN rail 35 1.378 3.5 0.138 The drawing below shows MS-TH-1 mounted on TH-11 fitted with heat shield TH-B1 (accessory). 1.5 0.059 Heat shield [Stainless steel (SUS304)] 7 0.276 2-M3×0.5 0.020 2.5 0.098 t 1.6 t 0.063 15 5.5 0.591 0.217 2.5 0.098 19.5 0.768 4.5 0.177 16 0.630 6 0.236 t 1.6 t 0.063 3.5 2.5 0.138 27 40 0.098 1.063 1.575 Small / Slim Object Detection Obstacle Detection 21.5 0.846 Assembly dimensions 35 1.378 28 1.102 10 0.394 16 0.630 4.5 0.177 Liquid Level Detection Water Detection ø6 ø0.236 cable, 2 m 6.562 ft long (TH-C2P: 1 m 3.281 ft long) Sensor head mounting bracket for spot type (Accessory for TH-11) 4.5 0.177 Liquid Leak Detection 2-ø4.5 ø0.177 mounting holes ø5 ø0.197 cable, 2 m 6.562 ft long MS-TH-1 Wafer Detection 10 0.394 Center of sensing MACHINE VISION SYSTEMS 12 0.472 45 1.772 13 0.512 34 1.339 40 1.575 3 0.118 90 3.543 3 0.118 16 0.630 90 3.543 EXT. 5.5 0.217 43 1.693 PLC Selection Guide OFD Controller /TH-C2 TH-C2P LASER MARKERS FA COMPONENTS 10 6 0.236 Suitable for 35 mm 1.378 in width DIN rail 35 1.378 OUT 1 operation indicator (Red) ø21 ø0.827 lens aperture ø6 ø0.236 cable, 2m 6.562 ft long Long sensing range type STATIC ELECTRICITY PREVENTION DEVICES HUMAN MACHINE INTERFACES 2-ø 4.5 ø0.177 mounting holes 21.5 0.846 SYNC. SIMPLE WIRE-SAVING UNITS 45 1.772 RUN CH. SET SENSOR OPTIONS 13 0.512 TH–C2 Center of sensing 12 0.472 10 0.394 90 3.543 OUT2 PRESSURE / FLOW SENSORS PARTICULAR USE SENSORS 40 1.575 3 0.118 OFD LIGHT CURTAINS / SAFETY COMPONENTS INDUCTIVE PROXIMITY SENSORS SENS. 43 1.693 OUT1 AREA SENSORS 90 3.543 7 5.5 0.217 8 MICRO PHOTOELECTRIC SENSORS 9 Sensor head / TH-11 SENS. SIZE PHOTOELECTRIC SENSORS DIMENSIONS (Unit: mm in) OUT1 LASER SENSORS TH SERIES 10 9 8 7 6 5 4 3 2 1 FIBER SENSORS Hot Melt Glue Detector 9 0.354 t 1.6 t 0.063 16 0.630 25 0.984 Material: Cold rolled carbon steel (SPCC) Two M3 (length 25 mm 0.984 in) screws with washers are attached. 34 1.339 19 0.748 (Note) Center of sensing 15 0.591 5° 27 40 1.575 1.063 29 1.142 9 0.354 5.5 0.217 (38.2) (1.504) t 1.6 t 0.063 5° 16 0.630 25 0.984 Note: 18 mm 0.709 in when the heat shield is not used. 2.5 0.098 4.5 0.177 5.5 0.217 Hot Melt Glue Detector DIMENSIONS (Unit: mm in) Sensor head mounting bracket for long sensing range type (Accessory for TH-12) 3 0.118 20 0.787 4.5 0.177 ø3.5 ø0.138 The drawing below shows MS-TH-2 mounted on TH-12 fitted with heat shield TH-B2 (accessory) 8 0.315 Heat shield [Stainless steel (SUS304)] AREA SENSORS 27 1.063 3 0.118 t 1.2 t 0.047 34 1.339 48 1.890 3.5 0.138 t 1.4 t 0.055 30 1.181 3 0.118 20 0.787 t 1.2 t 0.047 Center of sensing 26 (Note) 40 1.575 40 1.575 32 1.260 6.5 0.256 OS-TH12 15 0.591 4.5 0.177 7.5 0.295 (47.4) (1.866) t 1.4 t 0.055 PARTICULAR USE SENSORS MEASUREMENT SENSORS Note: 25 mm 0.984 in when the heat shield is not used. STATIC ELECTRICITY PREVENTION DEVICES LASER MARKERS PLC HUMAN MACHINE INTERFACES 3 0.118 5.2 0.205 0.9 0.035 21 0.827 4 0.157 t 0.3 t 0.012 39.7 1.563 4 0.157 11.4 0.449 INDUCTIVE PROXIMITY SENSORS WIRE-SAVING SYSTEMS 30 1.181 Assembly dimensions 0.9 2 0.079 0.035 35.2 1.386 PRESSURE / FLOW SENSORS SIMPLE WIRE-SAVING UNITS Slit mask for long sensing range type (Accessory for TH-12) 24 0.945 11.4 0.449 LIGHT CURTAINS / SAFETY COMPONENTS SENSOR OPTIONS 11 0.433 Material: Cold rolled carbon steel (SPCC) Two M3 (length 30 mm 1.181 in) screws with washers are attached. 6 45 0.177 0.236 34 48 1.339 1.890 8 0.315 LASER SENSORS MICRO PHOTOELECTRIC SENSORS 2-M3 15 7.5 0.591 0.259 FIBER SENSORS PHOTOELECTRIC SENSORS Assembly dimensions 40 1.575 34 1.339 14.2 0.559 4.5 0.177 950 The CAD data in the dimensions can be downloaded from our website. MS-TH-2 6 0.236 TH SERIES Slit 21 0.827 25 0.984 15.5 0.610 25 0.984 2 0.079 16 0.630 40 1.575 34 1.339 Center of sensing (6.4) (0.252) 3 0.118 ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS 2-ø3.4 ø0.134 mounting holes Material: Stainless steel (SUS304) Selection Guide Wafer Detection Liquid Leak Detection Liquid Level Detection Water Detection Color Mark Detection Hot Melt Glue Detection Ultrasonic Small / Slim Object Detection Obstacle Detection Other Products TH