Automation Controls Catalog
PP/RZSUR¿OH
)RUP&DQG$ VXUIDFH
PRXQWW\SH UHOD\V
TQ RELAYS
FEATURES
)ODWFRPSDFWVL]H
14.0 (L)×9.0 (W)×5.0 (H) mm
.551 (L)×.354 (W)×.197 (H) inch
1RPLQDORSHUDWLQJSRZHU
+LJKVHQVLWLYLW\RIP: )RUP
&VLQJOHVLGHVWDEOHW\SH
2XWVWDQGLQJVXUJHUHVLVWDQFH
)&&3DUW 9îȝV
RSHQFRQWDFWV
6XUIDFHPRXQWW\SHPHHW7HOFRUGLD
7HOFRUGLD 9îȝV
FRQWDFWDQGFRLO
',/WHUPLQDODUUD\HQDEOHVXVHRI,&
VRFNHWV
/RZWKHUPDOHOHFWURPRWLYHIRUFH
DSSUR[ȝ9
>DSSUR[ȝ9 VXUIDFHPRXQWW\SH @
/DWFKLQJW\SHVDOVRDYDLODEOH
6HOIFOLQFKLQJWHUPLQDODOVR
DYDLODEOH
8. $UDQJHRIVXUIDFHPRXQWW\SHVLV
DOVRDYDLODEOH
6$ /RZSUR¿OHVXUIDFHPRXQW
terminal type
SL: High connection reliability
VXUIDFHPRXQWWHUPLQDOW\SH
66 6SDFHVDYLQJVXUIDFHPRXQW
terminal type
9. 0%%FRQWDFWW\SHVDYDLODEOH
TYPICAL APPLICATIONS
1.
2.
3.
5.
7HOHSKRQHUHODWHGHTXLSPHQW
&RPPXQLFDWLRQV
0HDVXUHPHQWHTXLSPHQW
2$HTXLSPHQW
,QGXVWULDOPDFKLQHV
ORDERING INFORMATION
TQ 2
Contact arrangement
2: 2 Form C
Terminal shape
Nil: Standard PC board terminal
H: Self-clinching terminal
SA: SA type
SL: SL type
SS: SS type
Operating function
Nil: Single side stable
L: 1 coil latching
L2: 2 coil latching
MBB function
Nil: Standard (B.B.M.) type
2M: 2M.B.B. type
Nominal coil voltage (DC)*1,2
1.5 (SMD only), 3, 4.5, 5, 6, 9, 12, 24, 48V
Packing style*3
Nil: Tube packing
X: Tape and reel (picked from 1/2/3/4/5-pin side)
W: Tape and reel packing (picked from the 1/2/3/4/5-pin side)
With humidity indicator and silica gel in moisture proof bag
Z: Tape and reel packing (picked from the 6/7/8/9/10-pin side)
Y: Tape and reel packing (picked from the 6/7/8/9/10-pin side)
With humidity indicator and silica gel in moisture proof bag
Note 1) *48 V coil type: Single side stable only
Note 2) In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.
Note 3) The “W” and “Y” at the end of the part number is only available for SA and SS.
ビパヒペハヒヒ
industrial.panasonic.com/ac/e/
ー1ー
© Panasonic Corporation 2019
ASCTB14E ビパヒペヒヒ
TQ
TYPES
Ŷ 6WDQGDUG3&ERDUGWHUPLQDODQGVHOIFOLQFKLQJWHUPLQDO
6WDQGDUG %%0 W\SH
1) Standard PC board terminal
Contact
arrangement
Nominal coil
voltage
2 Form C
3 V DC
4.5 V DC
5 V DC
6 V DC
9 V DC
12 V DC
24 V DC
48 V DC
Single side stable
Part No.
TQ2-3V
TQ2-4.5V
TQ2-5V
TQ2-6V
TQ2-9V
TQ2-12V
TQ2-24V
TQ2-48V
1 coil latching
Part No.
TQ2-L-3V
TQ2-L-4.5V
TQ2-L-5V
TQ2-L-6V
TQ2-L-9V
TQ2-L-12V
TQ2-L-24V
—
2 coil latching
Part No.
TQ2-L2-3V
TQ2-L2-4.5V
TQ2-L2-5V
TQ2-L2-6V
TQ2-L2-9V
TQ2-L2-12V
TQ2-L2-24V
—
1 coil latching
Part No.
TQ2H-L-3V
TQ2H-L-4.5V
TQ2H-L-5V
TQ2H-L-6V
TQ2H-L-9V
TQ2H-L-12V
TQ2H-L-24V
—
2 coil latching
Part No.
TQ2H-L2-3V
TQ2H-L2-4.5V
TQ2H-L2-5V
TQ2H-L2-6V
TQ2H-L2-9V
TQ2H-L2-12V
TQ2H-L2-24V
—
6WDQGDUGSDFNLQJ )RUP& 7XEH SFV &DVH SFV
2. Self-clinching terminal
Contact
arrangement
Nominal coil
voltage
2 Form C
3 V DC
4.5 V DC
5 V DC
6 V DC
9 V DC
12 V DC
24 V DC
48 V DC
Single side stable
Part No.
TQ2H-3V
TQ2H-4.5V
TQ2H-5V
TQ2H-6V
TQ2H-9V
TQ2H-12V
TQ2H-24V
TQ2H-48V
1RWH 7\SHV ³´WRWKHHQGRISDUW1R GHVLJQHGWRZLWKVWDQGVWURQJYLEUDWLRQFDXVHGIRUH[DPSOHE\WKHXVHRIWHUPLQDOFXWWHUVFDQDOVREHRUGHUHG
+RZHYHUSOHDVHFRQWDFWXVLI\RXQHHGSDUWVIRUXVHLQORZOHYHOORDG
0%%W\SH
1) Standard PC board terminal
Contact arrangement
Nominal coil voltage
2 Form C
3 V DC
4.5 V DC
5 V DC
6 V DC
9 V DC
12 V DC
24 V DC
Single side stable
Part No.
TQ2-2M-3V
TQ2-2M-4.5V
TQ2-2M-5V
TQ2-2M-6V
TQ2-2M-9V
TQ2-2M-12V
TQ2-2M-24V
6WDQGDUGSDFNLQJ 7XEH SFV &DVH SFV
2) Self-clinching terminal
Contact arrangement
Nominal coil voltage
2 Form C
3 V DC
4.5 V DC
5 V DC
6 V DC
9 V DC
12 V DC
24 V DC
Single side stable
Part No.
TQ2H-2M-3V
TQ2H-2M-4.5V
TQ2H-2M-5V
TQ2H-2M-6V
TQ2H-2M-9V
TQ2H-2M-12V
TQ2H-2M-24V
6WDQGDUGSDFNLQJ 7XEH SFV &DVH SFV
1RWHV /DWFKLQJW\SHVDUHDYDLODEOHE\UHTXHVW3OHDVHFRQVXOWXVIRUGHWDLOV
8/&6$DSSURYHG 8/¿OH1R ( &6$¿OH1R /5
7\SHV ³´WRWKHHQGRISDUW1R GHVLJQHGWRZLWKVWDQGVWURQJYLEUDWLRQFDXVHGIRUH[DPSOHE\WKHXVHRIWHUPLQDOFXWWHUVFDQDOVREHRUGHUHG
+RZHYHUSOHDVHFRQWDFWXVLI\RXQHHGSDUWVIRUXVHLQORZOHYHOORDGDQGORZWKHUPDOSRZHU
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
ー2ー
© Panasonic Corporation 2019
ASCTB14E ビパヒペヒヒ
TQ
Ŷ 6XUIDFHPRXQWWHUPLQDO
7XEHSDFNLQJ
Contact
arrangement
Nominal coil
voltage
2c
1.5 V DC
3 V DC
4.5 V DC
5 V DC
6 V DC
9 V DC
12 V DC
24 V DC
48 V DC
Single side stable
Part No.
746Ƒ9
746Ƒ9
746Ƒ9
746Ƒ9
746Ƒ9
746Ƒ 9
746Ƒ9
746Ƒ9
746Ƒ9
1 coil latching
Part No.
746Ƒ/9
746Ƒ/9
746Ƒ/9
746Ƒ/9
746Ƒ/9
746Ƒ/ 9
746Ƒ/9
746Ƒ/9
—
2 coil latching
Part No.
746Ƒ/9
746Ƒ/9
746Ƒ/9
746Ƒ/9
746Ƒ/9
746Ƒ/ 9
746Ƒ/9
746Ƒ/9
—
Ƒ )RUHDFKVXUIDFHPRXQWHGWHUPLQDOLGHQWL¿FDWLRQLQSXWWKHIROORZLQJOHWWHU6$W\SH A, SS type: S
6WDQGDUGSDFNLQJ 7XEH SFV &DVH SFV
2) Tape and reel packing
Contact
arrangement
Nominal coil
voltage
2 Form C
1.5 V DC
3 V DC
4.5 V DC
5 V DC
6 V DC
9 V DC
12 V DC
24 V DC
48 V DC
Single side stable
Part No.
746Ƒ9=
746Ƒ9=
746Ƒ9=
746Ƒ9=
746Ƒ9=
746Ƒ 9=
746Ƒ9=
746Ƒ9=
746Ƒ9=
1 coil latching
Part No.
746Ƒ/9=
746Ƒ/9=
746Ƒ/9=
746Ƒ/9=
746Ƒ/9=
746Ƒ/ 9=
746Ƒ/9=
746Ƒ/9=
—
2 coil latching
Part No.
746Ƒ/9=
746Ƒ/9=
746Ƒ/9=
746Ƒ/9=
746Ƒ/9=
746Ƒ/ 9=
746Ƒ/9=
746Ƒ/9=
—
Ƒ )RUHDFKVXUIDFHPRXQWHGWHUPLQDOLGHQWL¿FDWLRQLQSXWWKHIROORZLQJOHWWHU6$W\SH A, SS type: S
6WDQGDUGSDFNLQJ 7DSHDQGUHHO SFV &DVH SFV
Notes: 1. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/2/3/4-pin side) is also available.
2. Tape and reel packing symbol “-Y” is not marked on the relay. “W” type tape and reel packing (picked from 1/2/3/4-pin side) is also available.
3OHDVHDGG³´WRWKHHQGRIWKHSDUWQXPEHUIRU$J3GFRQWDFWV ORZOHYHOORDG
RATING
Ŷ 6WDQGDUG3&ERDUGWHUPLQDODQGVHOIFOLQFKLQJWHUPLQDO
&RLOGDWD
2SHUDWLQJFKDUDFWHULVWLFVVXFKDVµ2SHUDWHYROWDJH¶DQGµ5HOHDVHYROWDJH¶DUHLQÀXHQFHGE\PRXQWLQJFRQGLWLRQVDPELHQW
WHPSHUDWXUHHWF
7KHUHIRUHSOHDVHXVHWKHUHOD\ZLWKLQRIUDWHGFRLOYROWDJH
µ,QLWLDO¶PHDQVWKHFRQGLWLRQRISURGXFWVDWWKHWLPHRIGHOLYHU\
>6WDQGDUG %%0 W\SH@
1) Single side stable (2 Form C)
Nominal coil
voltage
3 V DC
4.5 V DC
5 V DC
6 V DC
9 V DC
12 V DC
3LFNXSYROWDJH
(at 20°C 68°F)
75%V or less of
nominal voltage*
(Initial)
'URSRXWYROWDJH
(at 20°C 68°F)
Nominal operating
FXUUHQW
[±10%] (at 20°C 68°F)
10%V or more of
nominal voltage*
(Initial)
Coil resistance
[±10%] (at 20°C 68°F)
Nominal operating
power
46.7 mA
31.1 mA
28.1 mA
23.3 mA
15.5 mA
11.7 mA
ȍ
ȍ
ȍ
ȍ
ȍ
ȍ
140 mW
0D[DSSOLHGYROWDJH
(at 20°C 68°F)
150%V of
nominal voltage
24
V DC
8.3 mA
ȍ
200 mW
48
V DC
6.25 mA
ȍ
300 mW
Coil resistance
[±10%] (at 20°C 68°F)
Nominal operating
power
0D[DSSOLHGYROWDJH
(at 20°C 68°F)
100 mW
150%V of
nominal voltage
120%V of
nominal voltage
2) 1 coil latching (2 Form C)
Nominal coil
voltage
3 V DC
4.5 V DC
5 V DC
6 V DC
9 V DC
12 V DC
24 V DC
Set voltage
(at 20°C 68°F)
75%V or less of
nominal voltage*
(Initial)
Reset voltage
(at 20°C 68°F)
75%V or less of
nominal voltage*
(Initial)
Nominal operating
FXUUHQW
[±10%] (at 20°C 68°F)
33.3 mA
22.2 mA
20 mA
16.7 mA
11.1 mA
8.3 mA
6.3 mA
ȍ
202.5 ȍ
ȍ
ȍ
ȍ
1,440 ȍ
ȍ
150 mW
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
ー3ー
© Panasonic Corporation 2019
ASCTB14E ビパヒペヒヒ
TQ
3) 2 coil latching (2 Form C)
Nominal coil
voltage
3 V DC
4.5 V DC
5 V DC
6 V DC
9 V DC
12 V DC
24
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
75%V or less of
nominal voltage*
(Initial)
75%V or less of
nominal voltage*
(Initial)
V DC
Nominal operating
FXUUHQW
[±10%] (at 20°C 68°F)
Set coil
Reset coil
66.7 mA
66.7 mA
44.4 mA
44.4 mA
40 mA
40 mA
33.3 mA
33.3 mA
22.2 mA
22.2 mA
16.7 mA
16.7 mA
12.5 mA
12.5 mA
Coil resistance [±10%]
(at 20°C 68°F)
Set coil
45 ȍ
101.2 ȍ
125 ȍ
180 ȍ
405 ȍ
720 ȍ
Reset coil
45 ȍ
101.2 ȍ
125 ȍ
180 ȍ
405 ȍ
720 ȍ
1,920 ȍ
1,920 ȍ
Nominal operating
power
0D[DSSOLHGYROWDJH
(at 20°C 68°F)
Set coil
Reset coil
200 mW
200 mW
150%V of
nominal voltage
300 mW
300 mW
120%V of
nominal voltage
>0%%W\SH@
Nominal coil
voltage
3 V DC
4.5 V DC
5 V DC
6 V DC
9 V DC
12 V DC
24 V DC
3LFNXSYROWDJH
(at 20°C 68°F)
'URSRXWYROWDJH
(at 20°C 68°F)
80%V or less of
nominal voltage*
(Initial)
10%V or more of
nominal voltage*
(Initial)
Nominal operating
FXUUHQW
[±10%] (at 20°C 68°F)
66.7 mA
44.4 mA
40 mA
33.3 mA
22.2 mA
16.7 mA
8.3 mA
Coil resistance
[±10%] (at 20°C 68°F)
ȍ
ȍ
ȍ
ȍ
ȍ
ȍ
ȍ
Nominal operating
power
0D[DSSOLHGYROWDJH
(at 20°C 68°F)
200 mW
150%V of
nominal voltage
3XOVHGULYH -,6&
6SHFL¿FDWLRQV
Characteristics
Contact
Rating
Item
Arrangement
,QLWLDOFRQWDFWUHVLVWDQFHPD[
Contact material
Nominal switching capacity
0D[VZLWFKLQJSRZHU
0D[VZLWFKLQJYROWDJH
0D[VZLWFKLQJFXUUHQW
0LQVZLWFKLQJFDSDFLW\ 5HIHUHQFHYDOXH
1
Between contact and coil
Between contact sets
6SHFL¿FDWLRQV
2 Form C, 2 Form D (M.B.B.)
0D[Pȍ %\YROWDJHGURS9'&$
$J$XFODG
1 A 30 V DC, 0.5 A 125 V AC (resistive load)
30 W (DC), 62.5 V A (AC) (resistive load)
110 V DC, 125 V AC
1A
10μA 10mV DC
Standard (B.B.M) type: 140 mW (3 to 12 V DC), 200 mW (24 V DC), 300 mW (48 V DC)
M.B.B. type: 200 mW
100 mW (3 to 12 V DC), 150 mW (24 V DC)
200 mW (3 to 12 V DC), 300 mW (24 V DC)
Min. 1,000Mȍ (at 500V DC)
0HDVXUHPHQWDWVDPHORFDWLRQDV³,QLWLDOEUHDNGRZQYROWDJH´VHFWLRQ
6WDQGDUG %%0 W\SH 9UPVIRUPLQ 'HWHFWLRQFXUUHQW P$
0%%W\SH 9UPVIRUPLQ 'HWHFWLRQFXUUHQW P$
9UPVIRUPLQ 'HWHFWLRQFXUUHQW P$
9UPVIRUPLQ 'HWHFWLRQFXUUHQW P$
Between open contacts
1,500 V (10×160μs) (FCC Part 68)
Single side stable
Nominal
operating power 1 coil latching
2 coil latching
,QVXODWLRQUHVLVWDQFH ,QLWLDO
Breakdown
voltage (Initial)
Electrical
characteristics
6XUJH
EUHDNGRZQ
YROWDJH ,QLWLDO
Between open contacts
7HPSHUDWXUHULVH DW&68°F)
Operate time [Set time] (at 20°C 68°F)
Release time [Reset time] (at 20°C 68°F)
Mechanical
characteristics
([SHFWHGOLIH
Conditions
)XQFWLRQDO
'HVWUXFWLYH
)XQFWLRQDO
Vibration
resistance
'HVWUXFWLYH
Mechanical (at 180 cpm)
Shock resistance
Electrical (at 20 cpm)
Conditions for operation, transport and
storage*2
0D[RSHUDWLQJVSHHG DWUDWHGORDG
Unit weight
0D[& %\UHVLVWLYHPHWKRGQRPLQDOFRLOYROWDJHDSSOLHGWRWKHFRLO FRQWDFWFDUU\LQJFXUUHQW $
0D[PV>0D[PV@ 1RPLQDOFRLOYROWDJHDSSOLHGWRWKHFRLOH[FOXGLQJFRQWDFWERXQFHWLPH
0D[PV>0D[PV@ 1RPLQDOFRLOYROWDJHDSSOLHGWRWKHFRLOH[FOXGLQJFRQWDFWERXQFHWLPH
ZLWKRXWGLRGH
Min. 490 m/s2 +DOIZDYHSXOVHRIVLQHZDYH PV GHWHFWLRQWLPH V
Min. 980 m/s2 +DOIZDYHSXOVHRIVLQHZDYH PV
WR+]DWGRXEOHDPSOLWXGHRIPP 'HWHFWLRQWLPH V
WR+]DWGRXEOHDPSOLWXGHRIPP
Standard (B.B.M) type: Min. 108, M.B.B. type: Min. 107
Standard (B.B.M) type: Min. 2×105 (1 A 30 V DC resistive), Min. 105 (0.5 A 125 V AC resistive)
M.B.B. type: Min. 105 (1 A 30 V DC resistive)
Standard (B.B.M) type:
$PELHQWWHPSHUDWXUH ±&WR&±)WR)
+XPLGLW\ WR5+ 1RWIUHH]LQJDQGFRQGHQVLQJDWORZWHPSHUDWXUH
M.B.B. type:
$PELHQWWHPSHUDWXUH ±&WR&±)WR)
+XPLGLW\ WR5+ 1RWIUHH]LQJDQGFRQGHQVLQJDWORZWHPSHUDWXUH
20 cpm
$SSUR[J.053 oz
1RWHV
7KLVYDOXHFDQFKDQJHGXHWRWKHVZLWFKLQJIUHTXHQF\HQYLURQPHQWDOFRQGLWLRQVDQGGHVLUHGUHOLDELOLW\OHYHOWKHUHIRUHLWLVUHFRPPHQGHGWRFKHFNWKLVZLWKWKH
DFWXDOORDG7;7;67;'UHOD\$J3GFRQWDFWW\SHDUHDYDLODEOHIRUORZOHYHOORDGVZLWFKLQJ 9'&P$PD[OHYHO
*2 Refer to “AMBIENT ENVIRONMENT” in GENERAL APPLICATION GUIDELINES.
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
ー4ー
© Panasonic Corporation 2019
ASCTB14E ビパヒペヒヒ
TQ
Ŷ 6XUIDFHPRXQWWHUPLQDO
&RLOGDWD
1) Single side stable
Nominal coil
voltage
1.5 V DC
3 V DC
4.5 V DC
5 V DC
6 V DC
9 V DC
12 V DC
24 V DC
48
3LFNXSYROWDJH
(at 20°C 68°F)
75%V or less of
nominal voltage*
(Initial)
'URSRXWYROWDJH
(at 20°C 68°F)
10%V or more of
nominal voltage*
(Initial)
Nominal operating
FXUUHQW
(at 20°C 68°F)
93.8 mA
46.7 mA
31 mA
28.1 mA
23.3 mA
15.5 mA
11.7 mA
8.3 mA
V DC
6.3 mA
Coil resistance
[±10%](at 20°C 68°F)
ȍ
ȍ
ȍ
ȍ
ȍ
ȍ
ȍ
ȍ
ȍ
Nominal operating
power
0D[DSSOLHGYROWDJH
(at 20°C 68°F)
140 mW
150%V of
nominal voltage
200 mW
300 mW
120%V of
nominal voltage
Nominal operating
power
0D[DSSOLHGYROWDJH
(at 20°C 68°F)
70 mW
150%V of
nominal voltage
2) 1 coil latching
Nominal coil
voltage
1.5 V DC
3 V DC
4.5 V DC
5 V DC
6 V DC
9 V DC
12 V DC
24 V DC
Set voltage
(at 20°C 68°F)
75%V or less of
nominal voltage*
(Initial)
Reset voltage
(at 20°C 68°F)
75%V or less of
nominal voltage*
(Initial)
Nominal operating
FXUUHQW
(at 20°C 68°F)
46.9 mA
23.3 mA
15.6 mA
14 mA
11.7 mA
7.8 mA
5.8 mA
4.2 mA
Coil resistan
[±10%](at 20°C 68°F)
ȍ
ȍ
ȍ
ȍ
ȍ
ȍ
ȍ
ȍ
100 mW
3) 2 coil latching
Nominal coil
voltage
1.5 V DC
3 V DC
4.5 V DC
5 V DC
6 V DC
9 V DC
12 V DC
24 V DC
Set voltage
(at 20°C 68°F)
75%V or less of
nominal voltage*
(Initial)
Reset voltage
(at 20°C 68°F)
75%V or less of
nominal voltage*
(Initial)
Nominal operating
FXUUHQW
(at 20°C 68°F)
Set coil
Reset coil
93.8 mA
93.8 mA
46.7 mA
46.7 mA
31 mA
31 mA
28.1 mA
28.1 mA
23.3 mA
23.3 mA
15.5 mA
15.5 mA
11.7 mA
11.7 mA
8.3 mA
8.3 mA
Coil resistance
[±10%](at 20°C 68°F)
Set coil
ȍ
ȍ
ȍ
ȍ
ȍ
ȍ
ȍ
ȍ
Reset coil
ȍ
ȍ
ȍ
ȍ
ȍ
ȍ
ȍ
ȍ
Nominal operating
power
Set coil
Reset coil
140 mW
140 mW
200 mW
200 mW
0D[DSSOLHGYROWDJH
(at 20°C 68°F)
150%V of
nominal voltage
3XOVHGULYH -,6&
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
ー5ー
© Panasonic Corporation 2019
ASCTB14E ビパヒペヒヒ
TQ
6SHFL¿FDWLRQV
Characteristics
Contact
Rating
Item
Arrangement
,QLWLDOFRQWDFWUHVLVWDQFHPD[
Contact material
Nominal switching capacity
0D[VZLWFKLQJSRZHU
0D[VZLWFKLQJYROWDJH
0D[VZLWFKLQJFXUUHQW
0LQVZLWFKLQJFDSDFLW\ 5HIHUHQFHYDOXH
1
Single side stable
Nominal operating
1 coil latching
power
2 coil latching
,QVXODWLRQUHVLVWDQFH ,QLWLDO
Breakdown voltage
(Initial)
Electrical
characteristics
6XUJHEUHDNGRZQ
voltage (Initial)
Between open contacts
Between contact and coil
Between contact sets
Between open contacts
Between contacts and coil
7HPSHUDWXUHULVH DW&68°F)
Operate time [Set time] (at 20°C 68°F)
Release time [Reset time] (at 20°C 68°F)
Mechanical
characteristics
([SHFWHGOLIH
Conditions
Shock resistance
)XQFWLRQDO
'HVWUXFWLYH
)XQFWLRQDO
Vibration resistance
'HVWUXFWLYH
Mechanical
Electrical
Conditions for operation, transport and storage*2
0D[RSHUDWLQJVSHHG DWUDWHGORDG
Unit weight
6SHFL¿FDWLRQV
2 Form C
0D[Pȍ (By voltage drop 6 V DC 1A)
$J1LW\SH$XFODG
2 A 30 V DC, 0.5 A 125 V AC (resistive load)
60 W (DC), 62.5 VA (AC) (resistive load)
220 V DC, 125 V AC
2A
10μA 10mV DC
140 mW (1.5 to 12 V DC), 200 mW (24 V DC), 300 mW (48 V DC)
70 mW (1.5 to 12 V DC), 100 mW (24 V DC)
140 mW (1.5 to 12 V DC), 200 mW (24 V DC)
Min. 1,000Mȍ (at 500V DC)
0HDVXUHPHQWDWVDPHORFDWLRQDV³,QLWLDOEUHDNGRZQYROWDJH´VHFWLRQ
9UPVIRUPLQ 'HWHFWLRQFXUUHQW P$
9UPVIRUPLQ 'HWHFWLRQFXUUHQW P$
9UPVIRUPLQ 'HWHFWLRQFXUUHQW P$
1,500 V (10×160μs) (FCC Part 68)
2,500 V (2×10μs) (7HOFRUGLD)
0D[&
%\UHVLVWLYHPHWKRGQRPLQDOFRLOYROWDJHDSSOLHGWRWKHFRLO FRQWDFWFDUU\LQJFXUUHQW $
0D[PV>0D[PV@ 1RPLQDOFRLOYROWDJHDSSOLHGWRWKHFRLOH[FOXGLQJFRQWDFWERXQFH
time.)
0D[PV>0D[PV@ 1RPLQDOFRLOYROWDJHDSSOLHGWRWKHFRLOH[FOXGLQJFRQWDFWERXQFH
WLPH ZLWKRXWGLRGH
Min. 750 m/s2 +DOIZDYHSXOVHRIVLQHZDYH PV GHWHFWLRQWLPH V
Min. 1,000 m/s2 +DOIZDYHSXOVHRIVLQHZDYH PV
WR+]DWGRXEOHDPSOLWXGHRIPP 'HWHFWLRQWLPH V
WR+]DWGRXEOHDPSOLWXGHRIPP
Min. 108 (at 180 cpm)
Min. 105 (2 A 30 V DC resistive), Min. 2×105 (1 A 30 V DC resistive),
Min. 105 (0.5 A 125 V AC resistive) (at 20 cpm)
$PELHQWWHPSHUDWXUH
±&WR&±)WR)0D[±&WR& $ 0D[±)WR) $
+XPLGLW\ WR5+ 1RWIUHH]LQJDQGFRQGHQVLQJDWORZWHPSHUDWXUH
20 cpm
$SSUR[J.071 oz
1RWHV
7KLVYDOXHFDQFKDQJHGXHWRWKHVZLWFKLQJIUHTXHQF\HQYLURQPHQWDOFRQGLWLRQVDQGGHVLUHGUHOLDELOLW\OHYHOWKHUHIRUHLWLVUHFRPPHQGHGWRFKHFNWKLVZLWKWKH
DFWXDOORDG 7;7;67;'UHOD\$J3GFRQWDFWW\SHDUHDYDLODEOHIRUORZOHYHOORDGVZLWFKLQJ>9'&P$PD[OHYHO@
*2 Refer to “AMBIENT ENVIRONMENT” in GENERAL APPLICATION GUIDELINES.
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
ー6ー
© Panasonic Corporation 2019
ASCTB14E ビパヒペヒヒ
TQ
REFERENCE DATA
Ŷ 6WDQGDUG3&ERDUGWHUPLQDODQGVHOIFOLQFKLQJWHUPLQDO
/LIHFXUYH
0D[LPXPVZLWFKLQJFDSDFLW\
3. Mechanical life
No. of operations, ×104
1.0
0.5
0.4
0.3
30 V DC resistive load
100
125 V AC resistive load
10
0.2
100
200
Switching voltage,V
0
0.5
1.0
Switching current, A
90
Min.
60
50
40
Drop-out voltage
Max.
30
20
&RQWDFWUHVLVWDQFHPȍ
Ratio against the rated voltage, %V
90
Max.
Min.
80
70
60
50
Max.
40
Min.
30
10
5
10
15
No. of operations, ×104
20
0
5
10
15
No. of operations, ×104
20
Max.
20
Min.
10
10
100
1,000
10,000
No. of operations, ×104
90
80
Pick-up voltage
70
70
80
70
60
50
40
Max.
30
Min.
Temperature rise, °C
90
Min.
60
50
40
Drop-out voltage
Min.
20
10
0
5
No. of operations, ×104
5
No. of operations, ×104
Nominal coil voltage
3 to 12 V DC type
24 V DC type
60
50
1A
40
1A
0A
30
40
30
Drop-out
20 voltage
-40 -20
0
-10
-30
100 110 120 130 140 150
Coil applied voltage, %V
-40
+LJKIUHTXHQF\FKDUDFWHULVWLFV
(Insertion loss)
0DOIXQFWLRQDOVKRFN VLQJOHVLGHVWDEOH
Tested sample: TQ2-12V, 6 pcs.
,
Insertion loss, dB
Isolation, dB
Z
Y,
Y
1.0
Deenergized
condition
Energized condition
980m/s2
Z
980m/s2
980m/s2
,
Z
980m/s2
,
X
0.8
0.4
0.2
1,000
Y
980m/s2
X
0.6
50
Pick-up voltage
60 80
Ambient
temperature,°C
-20
,Z XX
100
x
x
10
20 40
0
10
+LJKIUHTXHQF\FKDUDFWHULVWLFV
(Isolation)
100
Frequency, MHz
10
Tested sample: TQ2-12V, 5 pcs.
10
10
10
Max.
30
20
20
0
Max.
$PELHQWWHPSHUDWXUH °C 86°F
100
&RQWDFWUHVLVWDQFHPȍ
Drop-out voltage
30
$PELHQWWHPSHUDWXUHFKDUDFWHULVWLFV
&RLOWHPSHUDWXUHULVH &
Tested sample: TQ2-12V
0HDVXUHGSRUWLRQ ,QVLGHWKHFRLO
Change of contact resistance
40
100
20
10
0
50
&KDQJHRISLFNXSDQGGURSRXWYROWDJH
Change of contact resistance
100
70
Max.
Min.
60
Tested sample: TQ2-12V, 6 pcs.
Condition: 0.5 A 125 V AC resistive load, 20 cpm
100
Pick-up voltage
Pick-up voltage
70
4.-(2) Electrical life (AC load)
Tested sample: TQ2-12V, 6 pcs.
Condition: 1 A 30 V DC resistive load, 20 cpm
80
80
0
4.-(1) Electrical life (DC load)
&KDQJHRISLFNXSDQGGURSRXWYROWDJH
90
Variation ratio,%
30
100
Ratio against the rated voltage, %V
Switching current, A
DC load (cosj=1)
AC load (cosj=1)
Ratio against the rated voltage, %V
Tested sample: TQ2-12V, 10 pcs.
0
980m/s2
,
Y
10
100
Frequency, MHz
1,000
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
ー7ー
© Panasonic Corporation 2019
ASCTB14E ビパヒペヒヒ
TQ
,QÀXHQFHRIDGMDFHQWPRXQWLQJ
,QÀXHQFHRIDGMDFHQWPRXQWLQJ
10. Contact reliability
(1 mA 5 V DC resistive load)
10
ON
Pick-up voltage
Rate of change, % Rate of change, %
Rate of change, % Rate of change, %
Tested sample: TQ2-12V
Condition: Detection level 10 W
ON
0
–10
ON
OFF OFF
10
Drop-out voltage
0
OFF
–10
0
5
.197
Inter-relay distance
10
Pick-up voltage
ON
F(t), %
99.9
99.0
95.0
ON
70.0
50.0
30.0
0
–10
ON
10
10.0
5.0
OFF
Drop-out voltage
2.0
1.0
0.5
0
OFF
–10
0.2
0.1
1.0
OFF
0
5
.197
Inter-relay distance
, mm inch
m=2.15
m=2.7¥107
95% reliability limit =
7.6¥106
(Weibull probability paper)
10
, mm inch
100
No. of operations, ×106
$FWXDOORDGWHVW P$9'&ZLUHVSULQJUHOD\ORDG
&LUFXLW
&KDQJHRISLFNXSDQGGURSRXWYROWDJH
100
90
90
57 V
DC
ȍ
80
Pick-up voltage
70
Max.
Min.
60
50
40
30
Drop-out voltage
12. 0.1 A 53 V DC resistive load test
&KDQJHRISLFNXSDQGGURSRXWYROWDJH
Max.
Min.
20
10
0
Wire spring relay Circuit diagram
&RQWDFWUHVLVWDQFHPȍ
ȍ
10
20
30
40
No. of operations, ×104
80
70
60
50
40
Max.
30
Min.
20
10
0
50
10
20
30
40
No. of operations, ×104
50
Change of contact resistance
100
90
80
Pick-up voltage
Max.
Min.
70
60
50
40
30
Drop-out voltage
20
Max.
Min.
10
0
500
1,000
1,500
&RQWDFWUHVLVWDQFHPȍ
100
Ratio against the rated voltage, %V
100
Ratio against the rated voltage, %V
20Hz
Change of contact resistance
90
80
70
60
Max.
50
40
30
Min.
20
10
0
2,000
500
No. of operations, ×104
1,000
1,500
2,000
No. of operations, ×104
'LVWULEXWLRQRI0%%WLPH
Tested sample: TQ2-2M-5V, 85 pcs.
50
40
30
20
26
19
15
21
Terminal Nos. 2-3-4: ON
-x:
105.6 ms
3sn-1: 163.8 ms
Min.: 23 ms
Max.: 243 ms
Terminal Nos. 7-8-9: ON
-x:
115.6 ms
3sn-1: 167.3 ms
30
Min.: 35 ms
Max.: 254 ms
19
Terminal Nos. 2-3-4: OFF
-x:
71.6 ms
3sn-1: 127.1 ms
Min.: 17 ms
Max.: 187 ms
Terminal Nos. 7-8-9: OFF
-x:
80.7 ms
3sn-1: 156.7 ms
Min.: 29 ms
Max.: 298 ms
50
41
40
35
31
30
27
20
17
12
11
10
60
10
6
7
4
10
150
200
250
300
350 ms max.
2
100 150
~
~
100
10
1
50
~
~
50
0
~
~
300 ms min.
~
~
4
200 250
~
100 150
~
50
10
~
~
0
~
2
200 250
300 ms min.
50
100
150
200
250
300
350 ms max.
~
60
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
ー8ー
© Panasonic Corporation 2019
ASCTB14E ビパヒペヒヒ
TQ
Ŷ 6XUIDFHPRXQWWHUPLQDO
0D[LPXPVZLWFKLQJFDSDFLW\
/LIHFXUYH
0HFKDQLFDOOLIH PRXQWLQJE\,56PHWKRG
Ratio against the rated voltage, %V
Tested sample: TQ2SA-12V, 10 pcs.
No. of operations, × 104
Switching current, A
3.0
2.0
100
DC resistive load
1.0
AC resistive load
0.5
0.4
0.3
50
30
20
125V AC
resistive load
30V DC
resistive load
10
0.2
100
90
80
Pick-up voltage
70
60
Min.
50
40
Drop-out voltage
30
20
0
50
100
200 300
Contact voltage, V
0
1.0
2.0
Switching current, A
4.-(1) Electrical life (2 A 30 V DC resistive load)
100
90
90
Pick-up voltage
Max.
Min.
60
50
40
Drop-out voltage
30
Max.
20
0
IRS 1
2
80
70
60
50
Max.
40
Min.
30
20
Min.
10
100
10
0
3 4 5 6 7 8 9 10
4
No. of operations, ×10
IRS 1
2
70
80
70
60
50
Max.
40
Temperature rise, °C
&RQWDFWUHVLVWDQFHPȍ
90
Coil voltage
DC 12V type
DC 48V type
0A
2A
0A
30
20
Max.
60
Min.
50
40
Drop-out voltage
30
Max.
20
Min.
10
IRS 1
2
3 4 5 6 7 8 9 10
4
No. of operations, ×10
5
2A
50
40
Pick-up voltage
70
Tested sample: TQ2SA-12V, 6 pcs.
20
Min.
30
60
80
6. Operate/release time
Tested sample: TQ2SA-12V, 6 pcs.
3RLQWPHDVXUHG ,QVLGHWKHFRLO
$PELHQWWHPSHUDWXUH °C 77°F
100
90
0
3 4 5 6 7 8 9 10
No. of operations, ×104
&RLOWHPSHUDWXUHULVH
Change of contact resistance
PRXQWLQJE\,56PHWKRG
Ratio against the rated voltage, %V
100
70
10
100
1,000 10,000
4
No. of operations, ×10
Tested sample: TQ2SA-12V, 6 pcs
Operating speed: 20 cpm
&KDQJHRISLFNXSDQGGURSRXWYROWDJH
PRXQWLQJE\,56PHWKRG
Change of contact resistance
PRXQWLQJE\,56PHWKRG
80
IRS 1
4.-(2) Electrical life (0.5 A 125 V AC resistive load)
&RQWDFWUHVLVWDQFHPȍ
Ratio against the rated voltage, %V
Tested sample: TQ2SA-12V, 6 pcs.
Operating speed: 20 cpm
&KDQJHRISLFNXSDQGGURSRXWYROWDJH
PRXQWLQJE\,56PHWKRG
Operate and release time, ms
20 30
Max.
Min.
10
0
Max.
Operate time
Release time
4
Max.
Min.
3
2
Max.
Min.
1
10
10
0
IRS 1
2
3
4
5
6
7
8
9 10
No. of operations, ×104
$PELHQWWHPSHUDWXUHFKDUDFWHULVWLFV
0
+LJKIUHTXHQF\FKDUDFWHULVWLFV
(Isolation)
70
80
90
100 110 120
Coil applied voltage, %V
+LJKIUHTXHQF\FKDUDFWHULVWLFV
(Insertion loss)
40
20
Pick-up voltage
x
Drop-out voltage
20 40 60 80
Ambient
temperature, °C
–20
Isolation, dB
–40 –20
Rate of change, %
Tested sample: TQ2SA-12V, 5 pcs.
0
100 110 120 130 140 150
Coil applied voltage, %V
Insertion loass, dB
0
100
1.0
0.8
0.6
50
0.4
0.2
–40
10
100
Frequency, MHz
1,000
10
100
Frequency, MHz
1,000
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
ー9ー
© Panasonic Corporation 2019
ASCTB14E ビパヒペヒヒ
TQ
Z'
1000m/s 2
1000m/s 2
Z
1000m/s 2
X'
1000m/s 2
Y'
ON
0
ON
–10
OFF OFF
10
Drop-out voltage
0
OFF
–10
0
3XOVHGLDOLQJWHVW
(35 mA 48 V DC wire spring relay load)
Tested sample: TQ2SA-12V, 6 pcs.
&LUFXLW
ȍ
0.08
ȝ)
48 V DC
–
0.08
ȝ)
TQ-SMD
3 relay
2
ȍ
Wire spring relay
Pick-up voltage
0
ON
–10
ON
OFF
10
Drop-out voltage
0
OFF
–10
0
100
100
90
90
80
Pick-up voltage
70
Max.
60
Min.
50
40
Drop-out voltage
30
Max.
Min.
20
0
OFF
1
2 3
4 5
6
.039 .079 .118 .157 .197 .236
Inter-relay distance , mm inch
Change of contact resistance
PRXQWLQJE\,56PHWKRG
80
70
60
50
40
Max.
30
Min.
20
10
DIMENSIONS (mm inch)
ON
10
1
2 3
4 5
6
.039 .079 .118 .157 .197 .236
Inter-relay distance , mm inch
&KDQJHRISLFNXSDQGGURSRXWYROWDJH
PRXQWLQJE\,56PHWKRG
Ratio against the rated voltage, %V
+
ON
Pick-up voltage
&RQWDFWUHVLVWDQFHPȍ
X
1000m/s2
10
,QÀXHQFHRIDGMDFHQWPRXQWLQJ
Tested sample: TQ2SA-12V, 6 pcs.
Rate of change, %
Deenergized
condition
Energized
condition
X'
Y
1000m/s 2
Rate of change, %
Z X
Rate of change, %
Z'
Y
Y'
,QÀXHQFHRIDGMDFHQWPRXQWLQJ
Tested sample: TQ2SA-12V, 5 pcs.
Rate of change, %
0DOIXQFWLRQDOVKRFN VLQJOHVLGHVWDEOH
Tested sample: TQ2SA-12V, 6 pcs
10
IRS
10
20
30
40
4
No. of operations, ×10
0
50
IRS
10
20
30
40
No. of operations, ×104
50
7KH&$'GDWDRIWKHSURGXFWVZLWKDCAD Data PDUNFDQEHGRZQORDGHGIURPKWWSV LQGXVWULDOSDQDVRQLFFRPDFH
6WDQGDUG3&ERDUGWHUPLQDODQG6HOIFOLQFKLQJWHUPLQDO
CAD Data
([WHUQDOGLPHQVLRQV
PC board pattern (Bottom view)
Standard PC board terminal
(4.75)
(.187)
14
.551
2.54
.100
9
.354
10.16
.400
10-1.0 dia.
10-.039 dia.
5 +0.4
-0.2
.197 +.016
-.008
2.54
.100 7.62
.300
3.5
.138
0.25
.010
2.54
.100
0.5
.020
7.62
.300
0.25
.010
Tolerance: ±0.1 ±.004
Self-clinching terminal
(4.75)
(.187)
14
.551
9
.354
Schematic (Bottom view)
5 +0.4
-0.2
.197 +.016
-.008
Single side stable
3.5
.138
+
0.25
.010
2.54
.100
0.5
.020
7.62
.300
1
2
3
4
5
1-coil latching
-
1
2
3
4
5
2-coil latching
1
2
3
4
+
0.25
.010
-
General tolerance: ±0.3 ±.012
10 9
8 7
6
Direction indication
(Deenergized condition)
+
-
+
10 9
8
7
6
Direction indication
(Reset condition)
10 9
5
8
7
6
Direction indication
(Reset condition)
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
ー 10 ー
© Panasonic Corporation 2019
ASCTB14E ビパヒペヒヒ
TQ
6XUIDFHPRXQWWHUPLQDO
CAD Data
Type
([WHUQDOGLPHQVLRQV *HQHUDOWROHUDQFH ±0.12)
14
.551
9
.354
0.5
.020
Max.7.5
.295
14
.551
2.54
.100
0.25
.010
9.56
.376
1
.039
0.25
.010
4.9
.193
2.54
.100
1.84
.072
8.46
.333
7.62
.300
9.3±0.5
.366±.020
0.5
.020
2.54
.100
2.94
.116
9
.354
Max.7.5
.295
SS type
1
.039
7.62
.300
11.5±0.5
.453±.020
0.5
.020
2.54
.100
9.56
.376
9
.354
4.9
.193
2.54
.100
2.94
.116
7.62
.300
11.5±0.5
.453±.020
0.2
.008
14
.551
SL type
1
.039
0.25
.010
4.9
.193
5.6
.220
SA type
2.54
.100
6XJJHVWHGPRXQWLQJSDG 7RSYLHZ 7ROHUDQFH ±.004)
6FKHPDWLF 7RSYLHZ
Single side stable
-
+
10 9
8
7
6
1-coil latching
+
1
2
3
4
5
Direction indication
(Deenergized condition)
10 9
8
2-coil latching
7
6
10 9
8
7
+
-
+
1
2
3
4
5
1
6
2
3
4
Direction indication
Direction indication
(Reset condition)
(Reset condition)
5
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
ー 11 ー
© Panasonic Corporation 2019
ASCTB14E ビパヒペヒヒ
TQ
NOTES
3DFNLQJVW\OH
7KHUHOD\LVSDFNHGLQDWXEHZLWKWKH
relay orientation mark on the left side, as
VKRZQLQWKH¿JXUHEHORZ
Orientation (indicates PIN No.1) stripe
(ii) SL, SS type
mm inch
0.4
.016
Relay polarity bar
2.0
(Z type)
1.5 +0.1
0 dia. .079
.059 +.004
dia.
0
16.0
.630
TQ-SMD relays
Note) *SS type
0.4
.016
Relay polarity bar
2.0
(Z type)
1.5 +0.1
0 dia. .079
.059 +.004
dia.
0
4.0
.157
A
(2) Dimensions of plastic reel
21 dia.
.827 dia.
1.75
.069
14.6
.575
TQ-SMD relays
16.0
.630
80 ±1 dia.
3.150 ±.039 dia.
330 ±2 dia.
12.992 ±.079 dia.
12.3
24.0 ±0.3
.484 .945
±.012
Tape coming out direction
C
B
mm inch
2.0
.079
11.5
.453
6.3 ±0.2
.248 ±.008
12.3
24.0 ±0.3
.484 .945 ±.012
(10.1
.398)*
Tape coming out direction
Stopper (green)
7DSHDQGUHHOSDFNLQJ VXUIDFHPRXQW
terminal type)
(1) Tape dimensions
(i) SA type
mm inch
.575
11.5
.453
7.8 ±0.2
.307 ±.008
Stopper (gray)
1.75
4.0
.069
.157 14.6
$XWRPDWLFLQVHUWLRQ
7RPDLQWDLQWKHLQWHUQDOIXQFWLRQRIWKH
UHOD\WKHFKXFNLQJSUHVVXUHVKRXOGQRW
H[FHHGWKHYDOXHVEHORZ
&KXFNLQJSUHVVXUHLQWKHGLUHFWLRQ$
9.8 N {1 kgf} or less
&KXFNLQJSUHVVXUHLQWKHGLUHFWLRQ%
9.8 N {1 kgf} or less
&KXFNLQJSUHVVXUHLQWKHGLUHFWLRQ&
9.8 N {1 kgf} or less
3OHDVHFKXFNWKHSRUWLRQ
$YRLGFKXFNLQJWKHFHQWHURIWKHUHOD\
,QDGGLWLRQH[FHVVLYHFKXFNLQJSUHVVXUH
WRWKHSLQSRLQWRIWKHUHOD\VKRXOGEH
avoided.
13 dia.
.512 dia.
$PELHQW(QYLURQPHQW
8VDJH7UDQVSRUWDQG6WRUDJH&RQGLWLRQV
'XULQJXVDJHVWRUDJHRUWUDQVSRUWDWLRQDYRLGORFDWLRQVVXEMHFWHG
WRGLUHFWVXQOLJKWDQGPDLQWDLQQRUPDOWHPSHUDWXUHKXPLGLW\DQG
SUHVVXUHFRQGLWLRQV
7HPSHUDWXUH+XPLGLW\
:KHQWUDQVSRUWLQJRUVWRULQJUHOD\VZKLOHWKH\DUHWXEH
SDFNDJHGWKHUHDUHFDVHVWKHWHPSHUDWXUHPD\GLႇHU
IURPWKHDOORZDEOHUDQJH,QWKLVFDVHEHVXUHWRFKHFNWKH
LQGLYLGXDOVSHFL¿FDWLRQV
$OVRDOORZDEOHKXPLGLW\OHYHOLVLQÀXHQFHGE\WHPSHUDWXUH
SOHDVHFKHFNFKDUWVVKRZQEHORZDQGXVHUHOD\VZLWKLQ
PHQWLRQHGFRQGLWLRQV $OORZDEOHWHPSHUDWXUHYDOXHV
6XUIDFHPRXQWWHUPLQDO
PC board terminal
Humidity (%RH)
Humidity (%RH)
85
85
Allowable range
Allowable range
Avoid icing
when used at
temperatures
lower than 0°C
Avoid condensation when
used at temperatures higher
than 0°C
5
-40
0
Temperature(°C)
Avoid condensation when
used at temperatures higher
than 0℃
Avoid icing
when used at
temperatures
lower than 0℃
5
85
-40
0
Temperature(°C)
70
Please refer to WKHODWHVWSURGXFWVSHFL¿FDWLRQV
ZKHQGHVLJQLQJ\RXUSURGXFW
5HTXHVWVWRFXVWRPHUV
KWWSV LQGXVWULDOSDQDVRQLFFRPDFHVDOHVSROLFLHV
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
ー 12 ー
© Panasonic Corporation 2019
ASCTB14E ビパヒペヒヒ
GUIDELINES FOR RELAY USAGE
For cautions for use, please read "GUIDELINES FOR RELAY USAGE".
https://industrial.panasonic.com/ac/e/control/relay/cautions_use/index.jsp
PRECAUTIONS FOR COIL INPUT
Long term current carrying
Maximum allowable voltage and temperature rise
A circuit that will be carrying a current continuously for
long periods without relay switching operation. (circuits for
emergency lamps, alarm devices and error inspection that, for
example, revert only during malfunction and output warnings
with form B contacts)
Continuous,long-term current to the coil will facilitate
deterioration of coil insulation and characteristics due to
heating of the coil itself. For circuits such as these, please use
a magnetic-hold type latching relay. If you need to use a single
stable relay, use a sealed type relay that is not easily affected
by ambient conditions and make a failsafe circuit design that
considers the possibility of contact failure or disconnection.
Proper usage requires that the rated coil voltage be impressed
on the coil.
Note, however, that if a voltage greater than or equal to the
maximum continuous voltage is impressed on the coil, the coil
may burn or its layers short due to the temperature rise.
Furthermore, do not exceed the usable ambient temperature
range listed in the catalog.
Temperature rise due to pulse voltage
When a pulse voltage with ON time of less than 2 minutes is
used, the coil temperature rise bares no relationship to the ON
time.
This varies with the ratio of ON time to OFF time, and
compared with continuous current passage, it is rather small.
The various relays are essentially the same in this respect.
DC Coil operating power
Current passage time
%
For continuous passage
Temperature rise value is 100%
Coil connection
When connecting coils of polarized relays, please check coil
polarity(+,-) at the internal connection diagram (Schematic).
If any wrong connection is made, it may cause unexpected
malfunction, like abnormal heat, fire and so on, and circuit do
not work.
Avoid impressing voltages to the set coil and reset coil at the
same time.
ON : OFF = 3 : 1
About 80%
ON : OFF = 1 : 1
About 50%
ON : OFF = 1 : 3
About 35%
ON : OFF = 1 : 1
Voltage
Steady state DC current should be applied to the coil.
The wave form should be rectangular. If it includes ripple, the
ripple factor should be less than 5%. However, please check
with the actual circuit since the electrical characteristics may
vary.
The rated coil voltage should be applied to the coil and the
set/reset pulse time of latching type relay differs for each
relays, please refer to the relay's individual specifications.
Time
Operate voltage change due to coil temperature rise (hot start)
In DC relays, after continuous passage of current in the coil, if
the current is turned OFF, then immediately turned ON again,
due to the temperature rise in the coil, the operate voltage will
become somewhat higher. Also, it will be the same as using it
in a higher temperature atmosphere.
The resistance/temperature relationship for copper wire is
about 0.4% for 1°C, and with this ratio the coil resistance
increases.
That is, in order to operate of the relay, it is necessary that the
voltage be higher than the operate voltage and the operate
voltage rises in accordance with the increase in the resistance
value.
However, for some polarized relays, this rate of change is
considerably smaller.
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
ー 13 ー
Panasonic Corporation 2021
ASCTB414E 202102
GUIDELINES FOR RELAY USAGE
NOTES
Usage, Storage, and Transport Conditions
During usage, storage, or transportation, avoid locations
subject to direct sunlight and maintain normal temperature,
humidity, and pressure conditions.
The allowable specifications for environments suitable for
usage, storage, and transportation are given below.
1) Temperature: The allowable temperature range differs for
each relay, so refer to the relay’s individual specifications.
In addition, when transporting or storing relays while they are
tube packaged, there are cases when the temperature may
differ from the allowable range. In this situation, be sure to
consult the individual specifications.
2) Humidity: 5 to 85% RH
The humidity range varies with the temperature.
Use within the range indicated in the graph.
(The allowable temperature depends on the relays.)
Icing
Condensation or other moisture may freeze on relays when
the temperature become lower than 0°C.
This icing causes the sticking of movable portion, the operation
delay and the contact conduction failure etc.
Panasonic Corporation does not guarantee the failures caused
by the icing.
The heat conduction by the equipment may accelerate the
cooling of relay itself and the icing may occur.
Please conduct product evaluations in the worst condition of
the actual usage.
Humidity (％ RH)
85
Allowable range
Avoid icing
when used at
temperatures
lower than 0°C
Avoid condensation when
used at temperatures higher
than 0°C
5
-40
0
Ambient temperature (℃)
Condensation
Condensation occurs when the ambient temperature drops
suddenly from a high temperature and humidity, or the relay
and microwave device is suddenly transferred from a low
ambient temperature to a high temperature and humidity.
Condensation causes the failures like insulation deterioration,
wire disconnection and rust etc.
Panasonic Corporation does not guarantee the failures caused
by condensation.
The heat conduction by the equipment may accelerate the
cooling of device itself, and the condensation may occur.
Please conduct product evaluations in the worst condition of
the actual usage. (Special attention should be paid when high
temperature heating parts are close to the device. Also please
consider the condensation may occur inside of the device.)
85
Low temperature and low humidity
The plastic becomes brittle if the switch is exposed to a low
temperature, low humidity environment for long periods of
time.
3) Pressure: 86 to 106 kPa
High temperature and high humidity
Storage for extended periods of time (including transportation
periods) at high temperature or high humidity levels or in
atmospheres with organic gases or sulfide gases may cause a
sulfide film or oxide film to form on the surfaces of the contacts
and/or it may interfere with the functions.
Check out the atmosphere in which the units are to be stored
and transported.
Package
In terms of the packing format used, make every effort to keep
the effects of moisture, organic gases and sulfide gases to the
absolute minimum.
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
ー 14 ー
Panasonic Corporation 2021
ASCTB414E 202102
GUIDELINES FOR RELAY USAGE
Storage requirements
Since the surface-mount terminal type is sensitive to humidity
it is packaged with tightly sealed anti-humidity packaging.
However, when storing, please be careful of the following.
1) Please use promptly once the anti-humidity pack is opened.
(within 72 hours, Max. 30°C / 70% RH).
If left with the pack open, the relay will absorb moisture which
will cause thermal stress when reflow mounting and thus
cause the case to expand. As a result, the seal may break.
2) If relays will not be used within 72 hours, please store relays
in a humidity controlled desiccator or in an anti-humidity bag
to which silica gel has been added.
4) The following cautionary label is affixed to the anti-humidity
pack.
* If the relay is to be soldered after it has been exposed to excessive humidity
atmosphere, cracks and leaks can occur.
Be sure to mount the relay under the required mounting conditions.
3) When relays (which is packaged with humidity indicator and
silica gel) meeting one of below criteria, please bake (dry)
before use.
When the storage conditions specified in 1) are exceeded.
When humidity indicator is in Ⅲ or Ⅳ status according to
judgement standard.
Silicon
When a source of silicone substances (silicone rubber, silicone
oil,silicone coating materials and silicone filling materials
etc.) is used around the relay, the silicone gas (low molecular
siloxane etc.) may be produced
This silicone gas may penetrate into the inside of the relay.
When the relay is kept and used in this condition, silicone
compound may adhere to the relay contacts which may cause
the contact failure.
Do not use any sources of silicone gas around the relay
(Including plastic seal types).
Please check humidity indicator color and decide if baking is
necessary or not.
● : indicate brown, ○ : Other than brown (blueish color)
Ⅰ
Ⅱ
Ⅲ
Ⅳ
5%
10%
60%
●
○
○
○
●
●
○
○
●
●
●
○
Bake treatment
necessity judgment
NOx Generation
When relay is used in an atmosphere high in humidity to
switch a load which easily produces an arc, the NOx created
by the arc and the water absorbed from outside the relay
combine to produce nitric acid.
This corrodes the internal metal parts and adversely affects
operation.
Avoid use at an ambient humidity of 85% RH or higher (at
20°C).
If use at high humidity is unavoidable, please contact our sales
representative.
No need to bake
No need to bake
Need to bake
Need to bake
Spot
5%
10%
60%
Humidity indicator card
With reel : 45°C, 96 hours or more.
Without reel (including relay only) : 60°C, 35 hours or more.
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
ー 15 ー
Panasonic Corporation 2021
ASCTB414E 202102
GUIDELINES FOR RELAY USAGE
OTHERS
Cleaning
1) Although the environmentally sealed type relay (plastic sealed
type,etc.) can be cleaned, avoid immersing the relay into cold
liquid (such as cleaning solvent) immediately after soldering.
Doing so may deteriorate the sealing performance.
2) Surface-mount terminal type relay is sealed type and it can be
cleaned by immersion.
Use pure water or alcohol-based cleaning solvent.
3) Cleaning with the boiling method is recommended (The
temperature of cleaning liquid should be 40°C or lower). Avoid
ultrasonic cleaning on relays.
Use of ultrasonic cleaning may cause breaks in the coil or
slight sticking of the contacts due to the ultrasonic energy.
Please refer to "the latest product specifications"
when designing your product.
•Requests to customers:
https://industrial.panasonic.com/ac/e/salespolicies/
Panasonic Corporation Electromechanical Control Business Division
industrial.panasonic.com/ac/e/
ー 16 ー
Panasonic Corporation 2021
ASCTB414E 202102
Please contact ..........
Electromechanical Control Business Division
1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8506, Japan
industral.panasonic.com/ac/e/
©Panasonic Corporation 2019
㻭㻿㻯㼀㻮㻝㻠㻱㻌㻌㻞㻜㻝㻥㻝㻝
Specifications are subject to change without notice.
工商网监
湘ICP备2023018690号
