XJNG2103

Pb Free Product XJNG2103 http://www.ncepower.com 200V 1A Half Bridge Driver General description: Package top view The XJNG2103 is a high voltage, high speed power MOSFET drivers with dependent high- and low-side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3 V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. The floating channel can be used to drive an N-channel power MOSFET in the high-side configuration which SOIC-8 operates up to 200 V. Features: Application  Floating channel designed for bootstrap operation  Switch Mode Power Supplies (SMPS)  Fully operational to +200 V  Small and medium- power motor driver  Tolerant to negative transient voltage, dV/dt immune  Power MOSFET driver  Gate drive supply range from 6 V to 18 V  Half / Full−Bridge Power Converters  3.3 V input logic compatible  Any Complementary Drive Converters  Typically output Source/Sink current capability 1A/1A Package Marking and Ordering Information Device Order code Device Package Device Marking XJNG2103 XJNG2103 SOIC8 XJNG2103 Typical Application Circuit RBOOT VCC VCC DBOOT VB Up to 200V CBOOT Q1 RG1 HIN C1 LIN HIN HO XJNG2103 LIN To Load VS Q2 RG2 COM Wuxi NCE Power Co., Ltd LO Page 1 v1.0 Pb Free Product XJNG2103 http://www.ncepower.com Maximum Ratings Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Symbol Definition Min. Max. Units -0.3 225 V VB High side floating supply VS High side floating supply return VB – 25 VB + 0.3 V VHO High side gate drive output VS -0.3 VB + 0.3 V VCC Low side and main power supply -0.3 25 V VLO Low side gate drive output -0.3 VCC + 0.3 V VIN Logic input of HIN & LIN -0.3 VCC + 0.3 V Allowable offset supply voltage transient — 50 V/ns PD Package Power Dissipation @ TA ≤25°C (SOIC-8) — 0.625 W RthJA Thermal Resistance Junction to Ambient (SOIC-8) — 200 °C /W TJ Junction Temperature — 150 °C TS Storage Temperature -55 150 °C TL Lead Temperature (Soldering, 10 seconds) — 300 °C HBM Model 1500 — V CDM Model 500 — V dVS/dt ESD Recommended Operating Conditions For proper operation the device should be used within the recommended conditions. The V S offset rating is tested with all supplies biased at a 15 V differential Symbol Definition Min. Max. Units VS + 6 VS + 20 V VB High side floating supply VS High side floating supply return -6 200 V VHO High side gate drive output VS VB V VCC Low side and main power supply 6 20 V VLO Low side gate drive output 0 VCC V VIN Logic input of HIN & LIN 0 VCC V TA Ambient temperature -40 125 °C Dynamic Electrical Characteristics VBIAS (VCC, VBS) = 15V, CL = 1000 pF and TA = 25°C unless otherwise specified Symbol Definition Min. Typ. Max. Units tON Turn on propagation delay — 150 250 ns tOFF Turn off propagation delay — 140 250 ns MT Delay matching time (tON, tOFF) — -- 50 ns DT Dead time — 200 -- ns tR Turn on rising time — 50 100 ns tF Turn off falling time — 40 100 ns Wuxi NCE Power Co., Ltd Page 2 v1.0 Pb Free Product XJNG2103 http://www.ncepower.com Static Electrical Characteristics VBIAS (VCC, VBS) = 15V, CL = 1000 pF and TA = 25°C unless otherwise specified. Symbol Definition Min. Typ. Max. Units VIH High level input threshold voltage 2.5 — — V VIL Low level input threshold voltage — — 0.8 V VOH High level output voltage drop, VBIAS - VO — — 0.2 V VOL Low level output voltage drop, VO — — 0.1 V ILK High-side floating supply leakage current — — 50 μA IQBS Quiescent VBS supply current — 40 120 μA IQCC Quiescent VCC supply current — 160 280 μA IIN+ Logic “1” input bias current (HIN “1” & LIN “0”) — 10 20 μA IIN- Logic “0” input bias current (HIN “0” & LIN “1”) — 15 30 μA VCCUV+ VCC supply undervoltage positive going threshold — 5.5 — V VCCUV- VCC supply undervoltage negative going threshold — 5.0 — V IO+ Output High short circuit pulsed current — 1 — A IO- Output low short circuit pulsed current — 1 — A Function Block Diagram VB UVLO PULSE GENERATE HIN LEVEL SHIFTER Output Logic HO INPUT LOGIC VS Deadtime & Shootthrough prevention VCC LIN Delay Output Logic LO COM Wuxi NCE Power Co., Ltd Page 3 v1.0 Pb Free Product XJNG2103 http://www.ncepower.com Pin Configuration 1 VCC 2 VB HIN HO Pin No. Pin Name Pin Function 1 VCC Low side and main power supply 2 HIN Logic input for high side gate driver output (HO) 3 LIN Logic input for low side gate driver output (LO) 4 COM Ground 5 LO Low side gate drive output, out of phase with LIN 6 VS High side floating supply return or bootstrap return 7 HO High side gate drive output, in phase with HIN 8 VB High side floating supply 8 7 XJNG2103 3 LIN VS 6 4 COM LO 5 Function Timing Diagram HIN HIN LIN LIN 90% HO 10% DT HO 90% LO LO DT 10% Input and output timing waveform 50% Cross Conduction Prevention Delay Time Waveform Definition 50% 50% 50% HIN LIN tON tOFF tR 90% LO 10% tON tF tOFF tR 90% 90% 10% HO 10% tF 90% 10% Switching Time Waveform Definition Wuxi NCE Power Co., Ltd Page 4 v1.0 Pb Free Product XJNG2103 http://www.ncepower.com Package Information SOIC-8 Package Dimensions Size MIN(mm) TYP(mm) MAX(mm) A - - 1.75 A1 0.10 - A2 1.30 A3 Size MIN(mm) TYP(mm) MAX(mm) D 4.70 4.90 5.10 0.225 E 5.80 6.00 6.20 1.40 1.50 E1 3.70 3.90 4.10 0.60 0.65 0.70 e 1.27BSC b 0.39 - 0.48 h 0.25 - 0.50 b1 0.38 0.41 0.43 L 0.50 - 0.80 c 0.21 - 0.26 L1 1.05BSC c1 0.19 0.20 0.21 θ 0 - 8° Symbol Symbol SOIC-8 Package Outlines Wuxi NCE Power Co., Ltd Page 5 v1.0 Pb Free Product http://www.ncepower.com XJNG2103 Attention: ■ ■ ■ ■ ■ ■ ■ ■ ■ Any and all NCE power products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your NCE power representative nearest you before using any NCE power products described or contained herein in such applications. NCE power assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all NCE power products described or contained herein. Specifications of any and all NCE power products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. NCE power Semiconductor CO.,LTD. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all NCE power products(including technical data, services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of NCE power Semiconductor CO.,LTD. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. NCE power believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the NCE power product that you intend to use. This catalog provides information as of Sep.2010. Specifications and information herein are subject to change without notice. Wuxi NCE Power Co., Ltd Page 6 v1.0