NT2016SA-26.000000MHZ-NBG2

Specification of Quartz Crystal Controlled Oscillators 1 NDK Part Number NT2016SA-26.000000MHz-NBG2 2 Chipset Maker Please contact us 3 4 GPS on mobile phone Please contact us 5 Application Chipset Name NDK Specification Number 6 Type NT2016SA 7 7.1 Rating Nominal Frequency (f nom) 26 MHz ( 2 digits marking) 7.2 Supply Voltage Current Consumption Output Voltage Max. 1.5 mA Min. 0.8 Vp-p Clipped sine wave (DC-Coupling) 7.5 Operable Temperature Range -30 to +85 °C 7.6 Storage Temperature Range Load impedance DC-cut Capacitor -40 to +85 °C 7.3 7.4 7.7 7.8 NSA0345C +1.8 V +/-5 % DC (-Earth) 8 Electrical specification 8.1 Frequency Stability 8.1.1 Frequency / Temperature characteristics 8.1.2 Frequency temperature slope 8.1.3 Frequency / Voltage coefficient 8.1.4 Frequency / Load coefficient q y tolerance 8.1.5 Frequency 8.1.6 8.2 8.3 8.4 8.5 Long-term Frequency Stability Short-term frequency stability Start-up time 8.6 8.7 Symmetry Phase Noise Stabilization Time Harmonic distortion 10 kΩ // 10 pF DC-cut capacitor of output is not put in TCXO. Please add DC-cut capacitor (1000 pF) in output line. Max. +/-0.5 ppm / -30 to +85 °C (Based on frequency at +25 +/-2 °C) Max. +/-0.1 ppm/°C / -30 to +85°C (Minimum of one measurement every 2 °C) Max. +/-0.1 ppm / +1.8 V +/-5 % Max. +/-0.2 ppm / (10 kΩ // 10 pF) +/-10% Max. +/-2.0 pp ppm (at +25 +/-2 °C, after 2times reflow soldering, based on nominal frequency) Max. +/-1.0 ppm / year Max. 1.0 ppb (Tau=0.1s) Max. 2.0 ms (to 90% of output amplitude) Max. 2.0 ms (Within +/-0.5ppm of final frequency) Max. -5.0 dBc 40 to 60 % Max. -83 dBc/Hz (at 10 Hz offset) Max. -108 dBc/Hz (at 100 Hz offset) Max. -132 dBc/Hz (at 1k Hz offset) Max. -146 dBc/Hz (at 10k Hz offset) Max. -150 dBc/Hz (at 100k Hz offset) 9 Dimension of external (Unit: mm) Feb.17.2012