NT2016SA-32M-END4263A

Specification of Temperature Compensated Crystal Oscillators 1. NDK Part Number 2. NDK Specification Number NT2016SA-32M-END4263A 3. Type 4. Absolute Maximum ratings NT2016SA END4263A Ratings Item Min. Max. Units Notes 1 Supply Voltage -0.6 +4.6 V - 2 Storage temp. range -40 +85 ℃ - 5. Electrical Specification Parameters 1 Nominal frequency 2 Supply voltage 3 SYM. Electrical Spec. Min. fnom Typ. Max. 32 Notes Units MHz - Vcc +1.8 +3.0 +3.0 V - Current consumption - - - 2 mA - 4 Output voltage - 0.8 - - Vp-p 5 Operating temp. rage Load impedance - -30 - +85 ℃ - - 9 10 11 kΩ - - 9 10 11 pF - 6 7 (resistance part) Load impedance (parallel capacitance) Clipped sine wave (DC-Coupling) DC-cut capacitor of output 8 DC-cut capacitor - - - - - is not put in TCXO.Please add DC-cut capacitor(1,000pF)in output line. 9 Frequency/ -30 to +85℃(Based on frequency at +25+/- - -2.5 - +2.5 ppm - -0.1 - +0.1 ppm +3.0V+/-5% - -0.1 - +0.1 ppm (10kΩ//10pF)+/-10% 12 Frequency tolerance - -1.0 - +1.0 ppm 13 Long-term frequency stabillity - -1.0 - +1.0 ppm year(at +25℃+/-2℃) - - -86 dBc/Hz @10 Hz offset - - -114 dBc/Hz @100 Hz offset - - -137 dBc/Hz @1 kHz offset - - -149 dBc/Hz @10 kHz offset - - -150 dBc/Hz @100 kHz offset 10 11 temperature characteristics Frequency/ Voltage coefficient Frequency/ Load coefficient 14 Phase noise 2℃) at +/-25℃+/-2℃,Before reflow soldering, based on nominal frequency at +25℃+/-2℃ 15 G Sensitivity 6. Dimension - - - 2 ppb/G (30 Hz to 1500 Hz random vibration in each of 3-axis) 2017.10.13