NX2016SA-32M-EXS00A-CS06465

Specification of Quartz Crystal Units 1 NDK Part Number 2 Chipset Maker NX2016SA-32M-EXS00A-CS06465 3 Application 4 Chipset Name LoRa 5 NDK Specification Number 6 Type EXS00A-CS06465 Semtech SX127x NX2016SA 7 Electrical Characteristics Parameters SYM. Electrical Spec. min Notes typ max Units 1 Nominal Frequency (fnom) fnom 32.000 2 Overtone order - Fundamental MHz 3 4 Frequency tolerance Frequency versus temperature characteristics *1. - -10 - +10 ppm at +25°C - -10 - +10 ppm at -20 to +70°C - -30 - +30 ppm at -40 to +85°C - Ω 5 Equivalent Series Resistance Rr - - 50 6 Load capacitance CL - 10 - 7 Level of drive - 10 100 mW 8 Shunt Capacitance C0 -30% 0.6 +30% pF 9 Motional Capacitance C1 -30% 1.89 +30% fF 10 11 12 Motional Inductance Pulling sensitivity Aging L1 S -30% 13.14 +30% mH -30% 8.41 +30% ppm/pF *2 - - -3 - +3 - -5 - +5 - -10 - +10 - -15 - +15 1st year (at +25ºC) ppm 5 years (at +25ºC) 10 years (at +25ºC) 20 years (at +25ºC) 13 Insulation resistance - 500 - - Ω 14 Operating temperature range - -40 - +85 °C 15 Storage temperature range - -40 - +85 °C 16 17 18 Air-tightness Recommended oscillation margin G-sensitivity - 600 - - 1.1×10^-9 Pa m^3/s 2 IEC -Network Series pF IEC -PI-Network Ω ppb/G *3 Helium leak detector *4 *5 *1. The reference temperature shall be +25°C *2. CL=10pF. This value is calculated by following formula. S=(C1×1,000)/{2(C0+CL)2} [ppm/pF] Unit C0:[pF], C1:[fF], CL:[pF] *3. When terminal to terminal and terminal to cover were applied at DC100V ±15V. *4. When the circuit does not have enough value as above, please contact us. *5. When using NDK standard osc. circuit. 11 Dimension 2018/03/26