NX3225SA-16MHZ-EXS00A-CS10477

Document No. EXS11B-06847A 1/6 REFERENCE SPECIFICATION Customer: Item: Crystal Unit Type: NX3225SA Nominal Frequency: 16.000 MHz Customer’s Spec. No.: For your reference we submit this specification. Please study and keep in your related document file. --- NDK Spec. No.: EXS00A-CS10477 Automotive Electronic Component Revision Record Rev. Rev. Date Items Contents Approved Checked Drawn ----- 7.Jan.2017 Issue --- I.Miyahara --- K.Tsukumo A 26.May.2017 M.Sato --- R.Omomo Fast page 4. Electrical Characteristics Add: Automotive Electronic Compenent Add: Frequency versus Temperature characteristics NIHON DEMPA KOGYO CO., LTD. Form P-1E (2006.6.28) Document No. EXS11B-06847A 2/6 1. Customer Specifications Number : --- 2. NDK Specification Number : EXS00A-CS10477 3. Type : NX3225SA 4. Electrical Characteristics Parameters 1 Nominal frequency SYM. Electrical Spec. min typ max Units fnom 16.000 MHz 2 Overtone order - Fundamental - 3 Frequency tolerance - Notes -10 - +10 ppm at +25C -11 - +11 ppm at -20 to +85C The reference temperature shall be 25C -50 - +50 ppm at -40 to -125C The reference temperature shall be 25C Frequency versus 4 Temperature characteristics - 5 Equivalent resistance - - - 80 Ω IEC -Network Series CL - 8 - pF IEC -Network 7 Level of drive - - 10 200 µW 8 Insulation resistance - 500 - - MΩ 9 Operating temperature range - -40 - +125 °C 10 Storage temperature range - -40 - +125 °C 11 Air-tightness - - - 6 Load capacitance 3 1.1×10-9 Pa m /s When terminal to terminal and terminal to cover were applied at DC100V ±15V. Helium leak detector 5. Examination results document Since a performance is guaranteed, an examination results document does not submit. 6. Application drawing 6.1 External dimension 6.2 Taping and reel figure 6.3 Holder marking 6.4 Reliability assurance Item : EXD14B-00370 : EXK17B-00098 : EXH11B-00317 : EXS30B-00249 7. Notice 7.1 Order items are manufactured according to specification. As to conditions, which are not indicated in the specification and unpredictable such as applied condition and oscillation margin, please check them beforehand. 7.2 Crystal units will be damaged by ultrasonic welding process due to resonance of crystal wafer itself. NDK does not recommend using ultrasonic welding. If Ultra Sonic welding used, NDK strongly recommend verifying crystal unit damage by ultrasonic weld. 7.3 The appearance color has a different case by purchasing it more than 2 suppliers f the component, but characteristic and reliability are guaranteed. NIHON DEMPA KOGYO CO., LTD. Form P-3B Document No. EXS11B-06847A 3/6 2.5±0.1 3.2±0.1 0.55±0.05 Cover Metal (0.9) 1.2 (1) #1 #2 Terminal Tungsten Metalize （Au Plating on Ni pre-plating) C0.3 0.7 (0.9) (1) Base Alumina Ceramics #3 #4 LAND PATTERN (TYPICAL) 2.2 PIN CONNECTION（TOP VIEW) #4 #3 #1 #2 1.6 1.2 1.4 ※ #1,#3 : Xtal #2,#4 : GND (CONNECTION COVER) Date of Revise Charge Approved 4.Sep.2007 R.Shariman K.Kubota A Drawn Designed Checked Approved Date 25.Oct.2005 Add Tolerance. Third Angle Projection Tolerance Dimension:mm 0.1 Name 25.Oct.2005 S.Mizusawa S.Mizusawa 25.Oct.2005 S.Mizusawa Reason Title Drawing No. NX3225SA Dimension Drawing EXD14B-00370 Scale -/Rev. A NIHON DEMPA KOGYO CO., LTD. Form M-1 Document No. EXS11B-06847A 4/6 TOP TAPE material : polyethylene terephthalate 40.0 0.15（4×10P) 4.0 0.1 +0.1 1.5 0 2.0 0.1 8.0 0.2 3 max 0.25 0.05 3.5 0.1 3.5 0.05 1.75 0.1 PULL DIRECTION 2.8 0.1 1.15 0.05 4.0 0.1 1.0 0.1 NX3225 Crystal Unit DIRECTION OF UNIT TAPING material: Conductive PS 12600 N 09 12600 N 09 12600 N 09 2.0 0.5 13.0 0.2 60 0 0 +1 180 -1. 5 21.0 0.8 +0. 3 9.00 LABEL 11.4 1.0 Reel material: Conductive PS EIAJ standard reel Begin Start End Roll method: 2 kind of methods Close Sealing method: 2 kind of methods 3000pcs-Product Tape I Date of Revise 22 Aug. 2012 Date Charge Approved T. Shimizu K. Oguri Name Drawn 3.Sep.2001 Designed Checked 3.Sep.2001 K.Oguri K.Oguri Approved 3.Sep.2001 K.Miyashita Reason Top cover tape leader line was deleted. Third Angle Projection Dimension:mm Title NX3225 Series Taping and Reel Spec. Tolerance Drawing No. EXK17B-00098 Scale / Rev. I NIHON DEMPA KOGYO CO., LTD. Form M-1 Document No. EXS11B-06847A 5/6 #4 Marking Frequency #3 Trace code (product date and Line number) AB CD #1 #2 Month Code (See Table) Year Code (Last One Digit) Manufacture's Symbol NOTE 1. Frequency Code Marking Frequency is consist of five digits, first five digits of Nominal Frequency Example Nominal Frequency 28.636363 MHz 28.636 Frequency Code 2. Month Code Table Month Month Code 1 2 3 4 5 6 Jan. Feb. Mar. Apr. May. Jun. 1 2 3 4 5 6 7 Jul. 7 8 9 10 Aug. Sep. Oct. 8 9 X 11 12 Nov. Dec. Y Z *Marking digits are not include a decimal point and dot mark. D Date of Revise 10. Dec 2014 Charge Y.Sakurai Date Name Drawn 16.Jan.2006 Designed Checked 16.Jan.2006 Approved 16.Jan.2006 I.Miyahara I.Miyahara --K.Okamoto 16.Jan.2006 Approved Reason H.Kobayashi Added terminal number information. Third Angle Projection Tolerance Dimension:mm Title Crystal Holder Marking Drawing No. EXH11B-00317 Scale / Rev. D NIHON DEMPA KOGYO CO., LTD. Form M-1 Document No. EXS11B-06847A 6/6 Reliability assurance item No. Test Item Test Methods (page: 1/1) Specification Code 1 High Temperature +125±3C 720h Storage *1 A 2 Low Temperature -40±3C 500h Storage A 3 Temperature Humidity A 4 Temperature Cycling *1 5 Vibration 6 Shock 7 Drop 8 Solderability 9 Reflow resistance +60±3C 90~95%RH 500h -40±3C / +125±3C It is 500 cycles using 30 minutes each as 1 cycle. Frequency Range : 10~55Hz Amplitude : 1.52mm 1 cycle : 1 minutes Test time : Three mutually perpendicular axes each 2 hours. Devices are shocked to half sine wave (981m/s2) three mutually perpendicular axis each 3 times. Devices are dropped from the height 75cm onto wooden block. ( more than 30mm thickness.) Execution 3 times random drops Pre-heat temperature : +150±10C Pre-heat time : 60~120s When the temperature of the specimen is reached at +215±3C, it shall be left for 30±1sec. Peak temperature 240±5C Material: Pb-free (Sn-3.0Ag-0.5Cu) Flux : Rosin resin methyl alcohol solvent ( 1 : 4 ) Pre-heat temperature : +150~180C Pre-heat time : 90±30s Heat temperature : more than +230C Heat time : 30s±10s Peak temperature : +260±5C Peak time : less than 10s A A A A B A *1. High Temperature Storage and Temperature Cycling In case of customer spec on High temperature exceed +85C, Low temperature exceed -40C, above test according to customer spec high or low temperature will be perform and guarantee. Specification code A B Specification f/f   5 ppm CI/CI   15 % or 5  make use larger value The electrodes should be covered by a new solder at least 90% of immersed area. Reliability assurance item: EXS30B-00249O NIHON DEMPA KOGYO CO., LTD. Form M-3