PSA-SB-3001T-30.834MHZ

QCM sensors QCM sensor(Single electrode type) Seeking QCM sensors ? NDK is happy to provide you high quality QCM sensors , which can be used for other manufacturers' QCM analyzers and your detection unit development uisng QCM technology. 2 kinds of termination are available(FR-4 type and lead pin type)! QCM sensor (Lead pin type) QCM sensor(FR-4 type) Model name Nominal Blank Blank Diameter of Frequency Cut shape Blank Holder Electrode (MHz) Angle PSA-SL-0901T 9.176 AT cut Circle plate φ8.7 Lead type Single Au+Cr +5～+85 PSA-SB0901T 9.176 AT cut Circle plate φ8.7 FR-4 type Single Au+Cr +5～+50 PSA-SL-3001T 30.834 AT cut Circle plate φ8.7 Lead type Single Au+Cr +5～+85 PSA-SB3001T 30.834 AT cut Circle plate φ8.7 FR-4 type Single Au+Cr +5～+50 Shape (mm) Operating temperatur e (Surface+ground) range (°C) Material *1: FR-4 type is NDK's unique product with rigid PC board for Crystal chip protection at customers' handling. To use the sensor, an oscillation unit fitting to the termination should be prepared. *2 To avoid an oxidation of the electorde, each QCM sensor is shipped after vacuum packaging with desiccant. But, for your usage in the best condisions, it is recommended to use your QCM sensor within a year after the purchase. If you open the vacuum package, your QCM sensors should be stored in a desiccator and should be used within 3 months. *3: Specifications and product names described in this site are subject to change for improvement without notice. The products are subject to production stoppage without notice. Drawing for lead type QCM sensor 1 1.0 Max Electrode(Bottom) of 30MHz 6.5±0.4 1.5±0.1 7 4.3±0.1 4.1±0.1 4.5±0.1 10.8±0.1 3 Electrode(Top) 4.3±0.1 4.3±0.1 5.0±0.1 Drawing for FR-4 type QCM sensor 2.0±0.1 2-φ0.4±0.1 1.0±0.1 2 20.0±1.0 6 5 Electrode(Bottom) of 9MHz 4 4.8±0.1 No. Portions 1 Cover 　 2 Base 3 Crystal 4 Lead 6 Glue 7 Electrode *: To protect crystal chip, 　 　 　 QCM sensor is shipped with cover. NIHON DEMPA KOGYO CO., LTD. Rev. 1.1 201302014 　 　 　 QCM sensors Application area The following s show a small example of the appplication area. The area is expanding to new For more details, please visit our website ! NIHON DEMPA KOGYO CO., LTD. Contact: Sales dept.#7 Address:Sasazuka NA bldg. 1-50-1 Sasazuka, Shibya-ku, Tokyo 151-8569 , Japan NIHON DEMPA KOGYO CO., LTD . Rev. 1.1 201302014