2SK4070-ZK-E2-AY

DATA SHEET MOS FIELD EFFECT TRANSISTOR 2SK4070 SWITCHING N-CHANNEL POWER MOS FET DESCRIPTION The 2SK4070 is N-channel MOS FET device that features a low gate charge and excellent switching characteristics, and designed for high voltage applications such as switching power supply, AC adapter. FEATURES • Low on-state resistance RDS(on) = 11 Ω MAX. (VGS = 10 V, ID = 0.5 A) • Low gate charge QG = 5 nC TYP. (VDD = 450 V, VGS = 10 V, ID = 1.0 A) • Gate voltage rating : ±30 V • Avalanche capability ratings ORDERING INFORMATION PART NUMBER 2SK4070-S15-AY Note Note Note Note LEAD PLATING PACKING Tube 70 p/tube PACKAGE TO-251 (MP-3-a) typ. 0.39 g TO-251 (MP-3-b) typ. 0.34 g TO-252 (MP-3ZK) typ. 0.27 g 2SK4070(1)-S27-AY 2SK4070-ZK-E1-AY 2SK4070-ZK-E2-AY Pure Sn (Tin) Tube 75 p/tube Tape 2500 p/reel Note Pb-free (This product does not contain Pb in external electrode.) ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Drain to Source Voltage (VGS = 0 V) Gate to Source Voltage (VDS = 0 V) Drain Current (DC) (TC = 25°C) Drain Current (pulse) Note1 (TO-251) 600 ±30 ±1.0 ±4.0 22 1.0 150 −55 to +150 0.8 38.4 V V A A W W °C °C A mJ (TO-252) VDSS VGSS ID(DC) ID(pulse) PT1 Note2 Total Power Dissipation (TC = 25°C) Total Power Dissipation (TA = 25°C) Channel Temperature Storage Temperature Single Avalanche Current Single Avalanche Energy Note3 Note3 PT2 Tch Tstg IAS EAS Notes 1. PW ≤ 10 μs, Duty Cycle ≤ 1% 2. Mounted on glass epoxy board of 40 mm × 40 mm × 1.6 mm 3. Starting Tch = 25°C, VDD = 150 V, RG = 25 Ω, VGS = 20 → 0 V The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. D18573EJ2V0DS00 (2nd edition) Date Published June 2007 NS Printed in Japan 2006 The mark shows major revised points. The revised points can be easily searched by copying an "" in the PDF file and specifying it in the "Find what:" field. 2SK4070 ELECTRICAL CHARACTERISTICS (TA = 25°C) CHARACTERISTICS Zero Gate Voltage Drain Current Gate Leakage Current Gate Cut-off Voltage Forward Transfer Admittance Note Note SYMBOL IDSS IGSS VGS(off) | yfs | RDS(on) Ciss Coss Crss td(on) tr td(off) tf QG QGS QGD TEST CONDITIONS VDS = 600 V, VGS = 0 V VGS = ±30 V, VDS = 0 V VDS = 10 V, ID = 1 mA VDS = 10 V, ID = 0.5 A VGS = 10 V, ID = 0.5 A VDS = 10 V, VGS = 0 V, f = 1 MHz VDD = 150 V, ID = 0.5 A, VGS = 10 V, RG = 10 Ω MIN. TYP. MAX. 100 ±100 UNIT μA nA V S 2.5 0.2 2.9 0.4 9.2 110 50 11 7.5 6 11 18 3.5 Drain to Source On-state Resistance Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Total Gate Charge Gate to Source Charge Gate to Drain Charge Body Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Note 11 Ω pF pF pF ns ns ns ns nC nC nC VDD = 450 V, VGS = 10 V, ID = 1.0 A IF = 1.0 A, VGS = 0 V IF = 1.0 A, VGS = 0 V, di/dt = 100 A/μs 5 1 2.8 0.86 135 285 1.5 VF(S-D) trr Qrr V ns nC Note Pulsed TEST CIRCUIT 1 AVALANCHE CAPABILITY D.U.T. RG = 25 Ω PG. VGS = 20 → 0 V BVDSS VDS VGS 0 τ Starting Tch τ = 1 μs Duty Cycle ≤ 1% VDS Wave Form TEST CIRCUIT 2 SWITCHING TIME L VDD PG. D.U.T. RL VGS VGS RG Wave Form 50 Ω 0 10% VGS 90% VDD VDS 90% 90% 10% 10% IAS ID VDD VDS 0 td(on) ton tr td(off) toff tf TEST CIRCUIT 3 GATE CHARGE D.U.T. IG = 2 mA 50 Ω RL VDD PG. 2 Data Sheet D18785EJ2V0DS 2SK4070 TYPICAL CHARACTERISTICS (TA = 25°C) DERATING FACTOR OF FORWARD BIAS SAFE OPERATING AREA 25 TOTAL POWER DISSIPATION vs. CASE TEMPERATURE 120 dT - Percentage of Rated Power - % 100 80 60 40 20 0 PT - Total Power Dissipation - W 20 15 10 5 0 0 25 50 75 100 125 150 0 25 50 75 100 125 150 Tch - Channel Temperature - °C TC - Case Temperature - °C 100 FORWARD BIAS SAFE OPERATING AREA DRAIN CURRENT vs. CASE TEMPERATURE 1.2 TC = 25°C, Single 1 ID - Drain Current - A ID(pulse) ID(DC) 1i ID - Drain Current - A 10 10 ms PW =1 i 0.8 0.6 0.4 0.2 0 00 1 μs Po w m i s er D i ss 0.1 ip RDS(on) Limited (VGS = 10 V) at io nL im it e d 0.01 1 10 100 1000 VDS - Drain to Source Voltage - V 0 25 50 75 100 125 150 TC - Case Temperature - °C 1000 TRANSIENT THERMAL RESISTANCE vs. PULSE WIDTH rth(ch-A) - Transient Thermal Resistance - °C/W 100 Rth(ch-A) = 125 °C/Wi 10 Rth(ch-C) = 5.68 °C/Wi 1 0.1 Single pulse 0.01 100 μ 1m 10 m 100 m 1 10 100 1000 PW - Pulse Width - s Data Sheet D18785EJ2V0DS 3 2SK4070 DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE FORWARD TRANSFER CHARACTERISTICS 2 1.8 ID - Drain Current - A 10 VDS = 10 V Pulsed VGS = 20 V ID - Drain Current - A 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 5 10 15 20 VDS - Drain to Source Voltage - V 1 Tch = −55°C −25°C 25°C 75°C 125°C 150°C 0 2 4 6 8 10 12 14 10 V 0.1 Pulsed 0.01 VGS - Gate to Source Voltage - V GATE CUT-OFF VOLTAGE vs. CHANNEL TEMPERATURE | yfs | - Forward Transfer Admittance - S FORWARD TRANSFER ADMITTANCE vs. DRAIN CURRENT 5 VGS(off) - Gate Cut-off Voltage - V 10 VDS = 10 V Pulsed 1 Tch = −55°C −25°C 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0 -50 0 50 100 150 Tch - Channel Temperature - °C 0.1 25°C 75°C 125°C 150°C VDS = 10 V ID = 1 m A 0.01 0.01 0.1 1 10 ID - Drain Current - A DRAIN TO SOURCE ON-STATE RESISTANCE vs. GATE TO SOURCE VOLTAGE RDS(on) - Drain to Source On-state Resistance - Ω RDS(on) - Drain to Source On-state Resistance - Ω DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT 20 18 16 14 12 10 8 6 0 5 10 15 20 VGS – Gate to Source Voltage - V 14 Pulsed 12 10 VGS = 10 V 8 20 V Pulsed 6 0.01 0.1 1 10 ID = 1.0 A 0.5 A ID - Drain Current - A 4 Data Sheet D18785EJ2V0DS 2SK4070 DRAIN TO SOURCE ON-STATE RESISTANCE vs. CHANNEL TEMPERATURE RDS(on) - Drain to Source On-state Resistance - Ω CAPACITANCE vs. DRAIN TO SOURCE VOLTAGE 1000 Ciss, Coss, Crss - Capacitance - pF 25 20 ID = 1.0 A 15 10 5 0 -50 0 50 100 150 Ciss 100 Coss 10 VGS = 0 V f = 1 MHz 1 0.1 1 10 100 Crss 0.5 A VGS = 10 V Pulsed Tch - Channel Temperature - °C VDS - Drain to Source Voltage – V SWITCHING CHARACTERISTICS 1000 DYNAMIC INPUT/OUTPUT CHARACTERISTICS 600 10 8 VGS 7 6 300 200 VDS 100 ID = 1.0 A 0 0 1 2 3 4 5 6 5 4 3 2 1 0 td(on), tr, td(off), tf - Switching Time - ns VDS – Drain to Source Voltage - V 500 400 tf 100 td(off) 10 td(on) tr 1 0.1 1 10 ID - Drain Current - A QG – Gate Chage - nC SOURCE TO DRAIN DIODE FORWARD VOLTAGE 100 REVWESE RECOVERY TIME vs. DRAIN CURRENT 1000 trr – Reverse Recovery Time - ns IF – Diode Forward Current - A 10 1 VGS = 10 V 0.1 0V Pulsed 0.01 0 0.2 0.4 0.6 0.8 1 1.2 100 di/dt = 100 A/μs VGS = 0 V 10 0.1 1 10 100 VF(S-D) – Source to Drain Voltage - V IF – Diode Forward Current - A Data Sheet D18785EJ2V0DS 5 VGS – Gate to Source Voltage - V VDD = 150 V VGS= 10 V RG = 10 Ω VDD = 450 V 250 V 150 V 9 2SK4070 SINGLE AVALANCHE CURRENT vs. INDUCTIVE LOAD 100 SINGLE AVALANCHE ENERGY DERATING FACTOR 120 Energy Derating Factor - % IAS - Single Avalanche Current - A 10 R G = 25 Ω VDD = 150 V VGS = 20 → 0 V Starting Tch = 25°C 100 80 60 40 20 0 VDD = 150 V RG = 25 Ω VGS = 20 → 0 V IAS ≤ 0.8 A IAS = 0.8 A 1 EAS = 38.4 mJ 0.1 0.01 0.1 1 10 100 25 50 75 100 125 150 L - Inductive Load - H Starting Tch - Starting Channel Temperature - °C 6 Data Sheet D18785EJ2V0DS 2SK4070 PACKAGE DRAWINGS (Unit: mm) 1) TO-251 (MP-3-a) Mold Area 2) TO-251 (MP-3-b) 0.7 TYP. 2.3 ±0.1 0.5 ±0.1 1.06 TYP. 6.6 ±0.2 5.3 TYP. 4.3 MIN. 6.6±0.2 5.3 TYP. 2.3±0.1 0.5±0.1 4 4.0 MIN. 6.1 ±0.2 4 6.1±0.2 1 9.3 TYP. No Plating 1 2 3 1.8 ±0.2 2 3 11.25 TYP. 16.1 TYP. 1.14 MAX. 1.14 MAX. 0.76±0.12 0.76 ±0.1 2.3 TYP. 2.3 TYP. 0.5 ±0.1 1.1±0.13 0.5±0.1 2.3 TYP. 2.3 TYP. 1.04 TYP. 1.02 TYP. 1. Gate 2. Drain 3. Source 4. Fin (Drain) 1.Gate 2.Drain 3.Source 4.Fin (Drain) 3) TO-252 (MP-3ZK) 1.0 TYP. EQUIVALENT CIRCUIT 2.3±0.1 0.5±0.1 No Plating 6.5±0.2 5.1 TYP. 4.3 MIN. 4 Drain 6.1±0.2 10.4 MAX. (9.8 TYP.) Gate Body Diode 4.0 MIN. 0.51 MIN. Source 1 0.8 2 3 No Plating 0 to 0.25 0.5±0.1 1.0 1.14 MAX. 2.3 2.3 0.76±0.12 1. Gate 2. Drain 3. Source 4. Fin (Drain) Remark Strong electric field, when exposed to this device, can cause destruction of the gate oxide and ultimately degrade the device operation. Steps must be taken to stop generation of static electricity as much as possible, and quickly dissipate it once, when it has occurred. 4.13 TYP. Data Sheet D18785EJ2V0DS 7 2SK4070 • T he information in this document is current as of June, 2007. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. • No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. • NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. • Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. • While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. • NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1