NDL7001L

DATA SHEET LASER DIODE NDL7401P Series 1 310 nm InGaAsP STRAINED MQW DC-PBH LASER DIODE COAXIAL MODULE WITH SINGLE MODE FIBER DESCRIPTION NDL7401P Series is 1 310 nm laser diode coaxial module with single mode fiber. It has a strained Multiple Quantum Well (st-MQW) structure and a built-in InGaAs monitor photo diode. It is recommended for junction and access network systems. The series is also available in FC-PC and SC-PC connector. FEATURES • Center wavelength • High output power from fiber • Low threshold current • High cut-off frequency • InGaAs monitor PIN-PD • Wide operating temperature range • Based on Bellcore TA-NWT-000983 T C = −40 to +85 °C λC = 1 310 nm Pf = 2.0 mW MIN. lth = 10 mA TYP. @TC = 25 °C f C = 2.0 GHz • PACKAGE DIMENSIONS in millimeters • NDL7401P2 φ 0.9 NDL7401P Optical Fiber SM-9/125 Length: 1 m φ 3.2±0.25 φ 7±0.2 φ 0.9 NDL7401P1 Optical Fiber SM-9/125 Length: 1 m φ 3.2±0.25 φ 7±0.2 15 2– φ 2.2 27.4±1.0 φ 0.9 Optical Fiber SM-9/125 Length: 1 m φ 3.2±0.25 φ 7±0.2 5 15 27.4±1.0 5 2.0±0.2 4.0±0.2 0.5±0.2 5 15 27.7±1.0 2.5±1.0 19.5±1.0 0.3 20±1.0 φ 0.45±0.05 φ 6±1.0 12.7±0.2 17.0±0.2 20±1.0 φ 0.45±0.05 φ 6±0.1 PIN CONNECTIONS φ 7±0.2 1.0±0.1 3.7±0.3 7.2±0.3 43 12 43 12 2 3 4 7±0.2 P.C.D. = φ 2 PD 4 1 LD CASE 3 P.C.D. = φ 2 2 4 1 PD 3 2 LD φ1 6 1 P.C.D. = φ 2 2– φ 2.5 3 0.3 4– φ 0.45 ±0.05 PD 2 1 CASE CASE 12±0.15 16.0 4 LD The information in this document is subject to change without notice. Document No. P10466EJ3V0DS00 (3rd edition) Date Published June 1996 P Printed in Japan The mark • shows major revised points. © 1995 NDL7401P Series ORDERING INFORMATION Part Number NDL7401P NDL7401PC NDL7401PD NDL7401P1 NDL7401P1C NDL7401P1D NDL7401P2 NDL7401P2C NDL7401P2D Available Connector Without Connector With FC-PC Connector With SC-PC Connector Without Connector With FC-PC Connector With SC-PC Connector Without Connector With FC-PC Connector With SC-PC Connector Vertical Flange Flat Mount Flange Description No Flange ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise specified) Parameter Forward Current of LD Reverse Voltage of LD Forward Current of PD Reverse Voltage of PD Operating Case Temperature Storage Temperature Lead Soldering Temperature (10 s) Symbol IF VR IF VR TC Tstg Tsld Ratings Ith + 50 2.0 10 20 −40 to +85 −40 to +85 260 Unit mA V mA V °C °C °C 2 NDL7401P Series ELECTRO-OPTICAL CHARACTERISTICS (TC = 25 °C, unless otherwise specified) Parameter Operating Voltage Threshold Current Symbol Vop Ith TC = 85 °C Modulation Current Differential Efficiency from Fiber Imod Pf = 2.0 mW 0.100 TC = 85 °C Center Emission Wavelength λC Pf = 2.0 mW, RMS (−20 dB) TC = −40 to +85 °C Temperature Dependence of Center Emission Wavelength Spectral Width 0.075 1 290 1 260 0.4 Pf = 2.0 mW Conditions MIN. TYP. 1.1 10 25 15 0.150 0.100 1 310 1 330 1 360 0.5 nm/°C nm MAX. 1.3 25 50 20 mA W/A Unit V mA • ηd ∆λ/∆T σ TC = −40 to +85 °C Pf = 2.0 mW, RMS (−20 dB) TC = 85 °C 1.3 1.5 0.2 0.3 100 700 0.1 2.5 4.0 0.5 0.5 nm Rise Time Fall Time Monitor Current Monitor Dark Current Tracking Error tr tf Im ID 10 to 90 % 90 to 10 % VR = 5 V, Pf = 2.0 mW VR = 5 V Im = const., TC = −40 to +85 °C ns ns µA 10 1.0 nA dB γ *1 *1 Pf γ = 10 log 2.0 mW Pf (mW) 2.0 Pf Im TC = 25 ˚C TC = –40 to +85 ˚C 0 Im (@ Pf (25 ˚C) = 2.0 mW) 3 NDL7401P Series • TYPICAL CHARACTERISTICS (TC = −40 to +85 °C) OUTPUT POWER FROM FIBER vs. FORWARD CURRENT 5.0 100 TC = –40 ˚C TC = +70 ˚C TC = +85 ˚C 3.0 THRESHOLD CURRENT AND OPERATION CURRENT vs. CASE TEMPERATURE Iop Ith Output Power from Fiber Pf (mW) 4.0 Threshold Current Ith (mA) Operation Current Iop (mA) TC = +25 ˚C 50 30 20 10 5 3 2 1 –60 –40 –20 0 20 40 60 80 2.0 1.0 0 50 100 150 100 Forward Current IF (mA) TEMPERATURE DEPENDENCE OF DIFFERENTIAL EFFICIENCY FROM FIBER Case Temperature TC (˚C) TEMPERATURE DEPENDENCE OF CENTER WAVELENGTH 1 360 Differential Efficiency from Fiber η d (W/A) 0.3 Center Wavelength λ C (nm) 0 20 40 60 80 100 1 340 0.2 1 320 1 300 0.1 1 280 0 –60 –40 –20 1 260 –60 –40 –20 0 20 40 60 80 100 Case Temperature TC (˚C) Case Temperature TC (˚C) 4 NDL7401P Series TYPICAL CHARACTERISTICS (TC = 25 °C) LONGITUDINAL MODE FROM FIBER 3.0 OUTPUT POWER FROM FIBER vs. LD MONITOR CURRENT • Output Power from Fiber Pf (mW) Relative Intensity 2.0 1.0 1 300 1 310 Wavelength λ (nm) FORWARD CURRENT vs. FORWARD VOLTAGE 1 320 0 0.5 1.0 1.5 LD Monitor Current Im (mA) FREQUENCY RESPONSE 9 6 50 Forward Current IF (mA) Relative Intensity (dB) 40 3 0 –3 –6 –9 –12 30 20 10 0 1 Forward Voltage VF (V) 2 0 1 2 3 4 5 Modulation Frequency f (GHz) 5 NDL7401P Series 1.3 µm FABRY-PEROT DC-PBH LASER DIODE FAMILY Package Part Number NDL7001 NDL7001L NDL7401P Series NDL7408P Series Remarks With monitor photo diode With monitor photo diode Without TEC With monitor photo diode φ5.6 mm Small Can φ5.6 mm Small Can with Lens 4-pin Coaxial Module with SMF REFERENCE Document Name NEC semiconductor device reliability/quality control system Quality grades on NEC semiconductor devices Semiconductor device mounting technology manual Guide to quality assurance for semiconductor devices Semiconductor selection guide Document No. LEI-1201 IEI-1209 C10535E MEI-1202 X10679E 6 NDL7401P Series [MEMO] 7 NDL7401P Series CAUTION Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. Please do not under any circumstances break the hermetic seal. NEC Corporation DANGER INVISIBLE LASER RADIATION AVOID DIRECT EXPOSURE TO BEAM OUTPUT POWER mW MAX WAVELENGTH nm CLASS lllb LASER PRODUCT SEMICONDUCTOR LASER NEC Building, 7-1, Shiba 5-chome, Minato-ku, Tokyo 108-01, Japan Type number: Manufactured: Serial Number: This product conforms to FDA regulations as applicable to standards 21 CFR Chapter 1. Subchapter J. AVOID EXPOSURE-Invisible Laser Radiation is emitted from this aperture The export of this product from Japan is prohibited without governmental license. To export or re-export this product from a country other than Japan may also be prohibited without a license from that country. Please call an NEC sales representative. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customer must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices in "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact NEC Sales Representative in advance. Anti-radioactive design is not implemented in this product. M4 94. 11