NX8562LB-CA

DATA SHEET LASER DIODE NX8562LB 1 550 nm CW LIGHT SOURCE InGaAsP STRAINED MQW-DFB LASER DIODE MODULE DESCRIPTION The NX8562LB is a 1 550 nm laser diode with Polarization Maintain Fiber (PMF). This device is designed as CW light source and ideal for transmission systems in which external modulators are used. FEATURES • Output power Pf = 20 mW MIN. • Wavelength selectable for ITU-T standards • Internal thermo-electric cooler and isolator • Hermetically sealed 14-pin butterfly package • Polarization maintain fiber pigtail PACKAGE DIMENSIONS in millimeters 15.24 2.54 8.89±0.13 10 MIN. 1.25 4– φ 2.67 22.3 TOP VIEW #7 #1 0.9 12.7±0.15 7 8 1 14 6.0 + – Cooler PD LD L Thermistor R #14 0.5 20.83±0.13 26.04±0.13 Optical Fiber (PMF) Length: 1 m MIN. Pin No. 1 2 3 4 5 6 7 #8 PIN CONNECTIONS Function Thermistor Thermistor Bias PD Anode PD Cathode Cooler Anode Cooler Cathode Pin No. 8 9 10 11 12 13 14 Function GND GND GND GND, LD Anode Signal Input GND GND 0.75 8.2±0.2 5.6 1.0 29.97±0.25 The information in this document is subject to change without notice. Document No. P13824EJ2V0DS00 (2nd edition) Date Published November 1998 NS CP(K) Printed in Japan The mark • shows major revised points. 5.15 © 1998 NX8562LB OPTICAL FIBER DIMENSIONS in millimeters φ 900 µm Nylon pipe φ 900 µm Nylon pipe -BA: FC-PC connector -CA: SC-PC connector 200 φ 400 µm Tight buffer PANDA fiber 10 1 000 MIN. Nylon pipe Cave Primary coat φ 9 µm core 125 400 500 900 (µm) 2 NX8562LB ORDERING INFORMATION Part Number NX8562LB NX8562LB-BA NX8562LB-CA Available Connector Without Connector With FC-PC Connector With SC-PC Connector ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise specified) Parameter Forward Current of LD Reverse Voltage of LD Forward Current of PD Reverse Voltage of PD Operating Case Temperature Storage Temperature Lead Soldering Temperature (10 s) Symbol IF VR IF VR TC Tstg Tsld Ratings 300 2.0 10 20 −20 to +65 −40 to +85 260 Unit mA V mA V °C °C °C ELECTRO-OPTICAL CHARACTERISTICS (TLD = 25 °C, TC = −20 to +65 °C) Parameter Laser Set Temperature Forward Voltage Threshold Current Optical Output Power from Fiber Threshold Output Power from Fiber Quantum Efficiency Peak Emission Wavelength Spectral Line Width Side Mode Suppression Ratio FM Response Relative Intensity Noise Flat frequency response Polarization Extinction Ratio *2 *1 Symbol Tset VF Ith Pf Pth Pf = 20 mW Conditions MIN. 20 0.9 TYP. MAX. 35 1.5 Unit °C V mA mW 20 IF = 167 mA, TLD = Tset IF = Ith 0.13 Pf = 20 mW, CW, TLD = Tset Pf = 20 mW, CW, 3 dB down Pf = 20 mW, CW Pf = 20 mW Pf = 20 mW, 20 MHz to 3 GHz Pf = 20 mW, +/−3 dB Pf = 20 mW, CW 1.8 15 20 30 50 1 540 1 35 70 20 40 100 µW W/A η λp 1 561 2 nm MHz dB MHz/mA ∆ν SMSR ηFM RIN fm ext −150 dB/Hz GHz dB *1 Wavelength selectable for ITU-T standards. *2 Polarization state of LD is aligned parallel to the slow axis. 3 NX8562LB ELECTRO-OPTICAL CHARACTERISTICS (Applicable to Monitor PD: TLD = 25 °C, TC = −20 to +65 °C) Parameter Monitor Current Dark Current Tracking Error Symbol Im ID γ *1 Conditions Pf = 20 mW, VR = 5 V VR = 5 V Im = const. MIN. 100 TYP. MAX. Unit µA 2 10 0.5 nA dB *1 γ = 10 log Pf 20 mW (mW) Pf TLD = TC = 25 ˚C 20 Pf TLD = 25 ˚C, TC = –20 to +65 ˚C 0 Im (@ Pf (25 ˚C) = 20 mW) Im ELECTRO-OPTICAL CHARACTERISTICS (Applicable to Thermistor and TEC: TLD = 25 °C, TC = −20 to +65 °C) Parameter Thermistor Resistance B Constant Cooler Current Cooler Voltage Symbol R B IC VC TLD = 25 °C Conditions MIN. 9.5 3 300 TYP. 10.0 3 400 MAX. 10.5 3 500 1.0 2.0 Unit kΩ K A V ∆T = 65 − Tset, Pf = 20 mW ∆T = 65 − Tset, Pf = 20 mW 4 NX8562LB DFB-LD FAMILY FOR TELECOM Absolute Maximum Ratings Part Number TC (°C) Tstg (°C) Typical Characteristics Ith (mA) TYP. NDL7603P Series NDL7620P Series NDL7701P Series NDL7705P Series NX8562LB NX8563LB Series NDL7910P −40 to +85 0 to +70 −20 to +85 −40 to +85 –20 to +65 −20 to +65 −20 to +70 −40 to +85 −40 to +85 −40 to +85 −40 to +85 –40 to +85 −40 to +85 −40 to +85 15 45 (MAX.) 15 15 20 20 7 Pf (mW) MIN. 2 2 2 2 20 10 0.5 λp (nm) TYP. 1 310 1 310 1 550 1 550 1 550 ITU-T 1 550 *1 SDH Application Package ≤ STM-4 : 622 Mb/s ≤ STM-16: 2.5 Gb/s ≤ STM-4 : 622 Mb/s ≤ STM-4 : 622 Mb/s CW Light Source for external modulator CW Light Source for external modulator ≤ STM-16: 2.5 Gb/s EA modulator integrated DFB-LD Coaxial Coaxial Coaxial Coaxial BFY BFY BFY *2 *1 *1 Wavelength selectable for ITU-T standards upon request. *2 Wavelength selectable for ITU-T standards. 5 NX8562LB REFERENCE Document Name NEC semiconductor device reliability/quality control system Quality grades on NEC semiconductor devices Semiconductor device mounting technology manual Semiconductor selection guide Document No. C11159E C11531E C10535E X10679E 6 NX8562LB [MEMO] 7 NX8562LB CAUTION Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. Please do not under any circumstances break the hermetic seal. NEC Corporation DANGER INVISIBLE LASER RADIATION AVOID DIRECT EXPOSURE TO BEAM OUTPUT POWER mW MAX WAVELENGTH nm CLASS lllb LASER PRODUCT SEMICONDUCTOR LASER NEC Building, 7-1, Shiba 5-chome, Minato-ku, Tokyo 108-01, Japan Type number: Manufactured: Serial Number: This product conforms to FDA regulations as applicable to standards 21 CFR Chapter 1. Subchapter J. AVOID EXPOSURE-Invisible Laser Radiation is emitted from this aperture The export of this product from Japan is prohibited without governmental license. To export or re-export this product from a country other than Japan may also be prohibited without a license from that country. Please call an NEC sales representative. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. Anti-radioactive design is not implemented in this product. M4 96. 5