PS2503L-1-F4

PHOTOCOUPLER PS2503-1,-2,-4,PS2503L-1,-2,-4 LOW INPUT CURRENT, HIGH SPEED SWITCHING −NEPOC MULTI PHOTOCOUPLER SERIES Series− DESCRIPTION The PS2503-1, -2, -4 and PS2503L-1, -2, -4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon phototransistor. The PS2503-1, -2, -4 are in a plastic DIP (Dual In-line Package) and the PS2503L-1, -2, -4 are lead bending type (Gull-wing) for surface mount. FEATURES • High isolation voltage (BV = 5 000 Vr.m.s.) • High-speed switching (tr = 20 µs TYP., tf = 30 µs TYP.) • Ordering number of tape product: PS2503L-1-E3, E4, F3, F4, PS2503L-2-E3, E4 • Safety standards • UL approved: File No. E72422 (S) • CSA approved: No. CA 101391 APPLICATIONS • Measurement equipment • Programmable logic controller • Telephone/Telegraph Receiver • Power supply Document No. PN10227EJ01V0DS (1st edition) (Previous No. P11304EJ4V0DS00) Date Published February 2003 CP(K) The mark shows major revised points. PS2503-1,-2,-4,PS2503L-1,-2,-4 PACKAGE DIMENSIONS (UNIT : mm) DIP Type PS2503-1 4.6±0.5 4 TOP VIEW 3 1. Anode 2. Cathode 3. Emitter 4. Collector PS2503-2 9.7±0.5 8 7 TOP VIEW 6 5 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector 6.5±0.5 6.5±0.5 1 2 7.62 1 2 34 7.62 3.3±0.5 4.15±0.4 3.3±0.5 4.15±0.4 3.5±0.3 3.5±0.3 1.25±0.15 0 to 15˚ +0.1 0.25 –0.05 0.50±0.10 0.25 M 1.25±0.15 2.54 0.50±0.10 0.25 M 0 to 15˚ +0.1 0.25 –0.05 2.54 PS2503-4 19.8±0.5 TOP VIEW 16 15 14 13 12 11 10 9 6.5±0.5 1 2 3 7.62 3.3±0.5 4.15±0.4 3.5±0.3 45678 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector 1.25±0.15 2.54 0.50±0.10 0.25 M 0 to 15˚ +0.1 0.25 –0.05 2 Data Sheet PN10227EJ01V0DS PS2503-1,-2,-4,PS2503L-1,-2,-4 Lead Bending Type PS2503L-1 4.6±0.5 PS2503L-2 9.7±0.5 TOP VIEW 4 3 TOP VIEW 8 7 6 5 1, 3. Anode 2, 4. Cathode 5, 7. Emitter 6, 8. Collector 6.5±0.5 6.5±0.5 1. Anode 2. Cathode 3. Emitter 4. Collector 1 2 1 2 3 4 0.25 +0.1 –0.05 0.25 +0.1 –0.05 0.1 +0.1 –0.05 3.5±0.3 3.5±0.3 1.25±0.15 0.25 M 2.54 0.15 0.9±0.25 9.60±0.4 1.25±0.15 0.25 M 2.54 0.15 0.9±0.25 9.60±0.4 PS2503L-4 19.8±0.5 TOP VIEW 16 15 14 13 12 11 10 9 6.5±0.5 1 0.25 +0.1 –0.05 2345678 1, 3, 5, 7. Anode 2, 4, 6, 8. Cathode 9, 11, 13, 15. Emitter 10, 12, 14, 16. Collector 3.5±0.3 1.25±0.15 0.25 M 2.54 0.15 0.9±0.25 9.60±0.4 0.1 +0.1 –0.05 0.1 +0.1 –0.05 Data Sheet PN10227EJ01V0DS 3 PS2503-1,-2,-4,PS2503L-1,-2,-4 MARKING EXAMPLE PS2503-1 No. 1 pin Mark No. 1 pin Mark PS2503-2, -4 2503 M 003 Assembly Lot PS2503-2 M 003 Country Assembled Type Number Assembly Lot M 0 03 M 0 03 Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Week Assembled Year Assembled (Last 1 Digit) In-house Code CTR Rank Code Package Standard PKG New PKG Made in Japan Made in Taiwan Package Standard PKG New PKG Made in Japan Made in Taiwan Blank Blank ORDERING INFORMATION (Solder Contains Lead) Part Number PS2503-1 PS2503L-1 PS2503L-1-E3 PS2503L-1-E4 PS2503L-1-F3 PS2503L-1-F4 PS2503-2 PS2503L-2 PS2503L-2-E3 PS2503L-2-E4 PS2503-4 PS2503L-4 16-pin DIP Magazine case 20 pcs PS2503-4 Embossed Tape 1 000 pcs/reel 8-pin DIP Magazine case 45 pcs PS2503-2 Embossed Tape 2 000 pcs/reel Embossed Tape 1 000 pcs/reel Package 4-pin DIP Packing Style Magazine case 100 pcs Application Part Number PS2503-1 *1 *1 For the application of the Safety Standard, following part number should be used. 4 Data Sheet PN10227EJ01V0DS PS2503-1,-2,-4,PS2503L-1,-2,-4 ORDERING INFORMATION (Pb-Free) Part Number PS2503-1-A PS2503L-1-A PS2503L-1-E3-A PS2503L-1-E4-A PS2503L-1-F3-A PS2503L-1-F4-A PS2503-2-A PS2503L-2-A PS2503L-2-E3-A PS2503L-2-E4-A PS2503-4-A PS2503L-4-A 16-pin DIP Magazine case 20 pcs PS2503-4 Embossed Tape 1 000 pcs/reel 8-pin DIP Magazine case 45 pcs PS2503-2 Embossed Tape 2 000 pcs/reel Embossed Tape 1 000 pcs/reel Package 4-pin DIP Packing Style Magazine case 100 pcs Application Part Number PS2503-1 *1 *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherw ise specified) Ratings Parameter Symbol PS2503-1, PS2503L-1 Diode Reverse Voltage Forward Current (DC) Power Dissipation Derating Power Dissipation Peak Forward Current Transistor *1 PS2503-2,-4 PS2503L-2,-4 6 80 Unit VR IF V mA 1.2 120 mW/°C mW/ch A V V mA/ch 1.2 120 mW/°C mW/ch Vr.m.s. °C °C ∆PD/°C PD IFP VCEO VECO IC 1.5 150 1 40 0.6 30 1.5 150 5 000 −55 to +100 −55 to +150 Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Derating Power Dissipation ∆PC/°C PC BV TA Tstg Isolation Voltage *2 Operating Ambient Temperature Storage Temperature *1 PW = 100 µs, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output Data Sheet PN10227EJ01V0DS 5 PS2503-1,-2,-4,PS2503L-1,-2,-4 ELECTRICAL CHARACTERISTICS (TA = 25 °C) Parameter Diode Forward Voltage Reverse Current Terminal Capacitance Transistor Collector to Emitter Dark Current Coupled Current Transfer Ratio (IC/IF) *1 Symbol VF IR Ct ICEO IF = 1 m A VR = 5 V Conditions MIN. TYP. 1.1 MAX. 1.3 5 Unit V µA pF V = 0 V, f = 1.0 MHz VCE = 40 V, IF = 0 mA 50 100 nA CTR IF = 1 mA, VCE = 5 V 100 200 400 % Collector Saturation Voltage Isolation Resistance Isolation Capacitance Rise Time Fall Time *2 VCE(sat) IF = 1 mA, IC = 0.2 mA 11 0.25 V Ω RI-O CI-O tr tf VI-O = 1.0 kVDC V = 0 V, f = 1.0 MHz VCC = 5 V, IF = 1 mA, RL = 10 kΩ 10 0.5 20 30 pF µs *2 *1 CTR rank (only PS2503-1, PS2503L-1) K: L: M: 200 to 400 (%) 150 to 300 (%) 100 to 200 (%) *2 Test circuit for switching time Pulse Input IF VCC PW = 100 µs Duty Cycle = 1/10 VOUT RL = 10 kΩ 50 Ω 6 Data Sheet PN10227EJ01V0DS PS2503-1,-2,-4,PS2503L-1,-2,-4 TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherw ise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 150 150 Diode Power Dissipation PD (mW) PS2503-1 PS2503L-1 100 PS2503-2 PS2503L-2 PS2503-4 PS2503L-4 100 PS2503-2 PS2503L-2 PS2503-4 PS2503L-4 50 PS2503-1 PS2503L-1 1.5 mW/˚C 1.5 mW/˚C 50 1.2 mW/˚C 1.2 mW/˚C 0 25 50 75 100 125 150 0 25 50 75 100 125 150 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) FORWARD CURRENT vs. FORWARD VOLTAGE 100 50 Forward Current IF (mA) COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 12 5 mA Collector Current IC (mA) 10 5 TA = +100 ˚C +60 ˚C +25 ˚C 4 mA 3 mA 10 8 2 mA 1 0.5 0 ˚C –25 ˚C –55 ˚C 6 1.5 mA 4 2 1 mA 0.8 mA IF = 0.6 mA 0.1 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 0 2 4 6 8 10 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE Collector to Emitter Dark Current ICEO (nA) COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 30 100 50 Collector Current IC (mA) 10 mA VCE = 40 V 30 V 20 V 10 V 10 5 5 mA 2 mA 1 mA IF = 0.8 mA 10 5.0 1 0.5 1.0 0.3 –25 0 25 50 75 100 0.1 0 0.2 0.4 0.6 0.8 1.0 Ambient Temperature TA (˚C) Collector Saturation Voltage VCE(sat) (V) Data Sheet PN10227EJ01V0DS 7 PS2503-1,-2,-4,PS2503L-1,-2,-4 NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE Normalized Current Transfer Ratio CTR 400 CURRENT TRANSFER RATIO vs. FORWARD CURRENT Current Transfer Ratio CTR (%) VCE = 5 V 300 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 –30 0 25 Normalized to 1.0 at TA = 25 ˚C, IF = 1 mA, VCE = 5 V 50 75 100 200 Sample A B C 100 0 0.3 0.5 1 5 10 50 100 Ambient Temperature TA (˚C) Forward Current IF (mA) SWITCHING TIME vs. AMBIENT TEMPERATURE 500 CTR = 290 %, VCC = 5 V, IF = 1 mA, RL = 10 kΩ 50 SWITCHING TIME vs. LOAD RESISTANCE Switching Time t ( µ s) 100 50 tf ts tr td Switching Time t ( µ s) 10 5 tr td tf IF = 1 mA, VCC = 5 V, CTR = 209 %, ts IF VCC VO 50 Ω RL 50 k100 k 10 5 1 0.5 1 –50 –25 0 25 50 75 100 Ambient Temperature TA (˚C) 0.1 100 500 1 k 5 k 10 k Load Resistance RL (Ω) FREQUENCY RESPONSE 1.2 VCC = 5 V, CTR = 209 % 1.0 LONG TERM CTR DEGRADATION CTR (Relative Value) Normalized Gain GV 0 –3.0 –6.0 –9.0 –12.0 –15.0 100 1k 10 k Frequency f (Hz) 100 k 1M RL = 5.6 kΩ 1 kΩ 300 Ω 0.8 0.6 0.4 0.2 0 IF = 5 mA TA = 25˚C IF = 5 mA TA = 60˚C 102 103 Time (Hr) 104 105 Remark The graphs indicate nominal characteristics. 8 Data Sheet PN10227EJ01V0DS PS2503-1,-2,-4,PS2503L-1,-2,-4 TAPING SPECIFICATIONS (UNIT : mm) Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.75±0.1 φ 1.5 +0.1 –0 4.5 MAX. 16.0±0.3 7.5±0.1 1.55±0.1 8.0±0.1 10.3±0.1 5.3±0.1 4.0±0.1 0.4 Tape Direction PS2503L-1-E3 PS2503L-1-E4 Outline and Dimensions (Reel) 2.0±0.5 2.0±0.5 φ 13.0±0.2 R 1.0 φ 21.0±0.8 φ 80.0±1.0 φ 254±2.0 17.5±1.0 21.5±1.0 Packing: 1 000 pcs/reel 15.9 to 19.4 Outer edge of flange Data Sheet PN10227EJ01V0DS 9 PS2503-1,-2,-4,PS2503L-1,-2,-4 Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.75±0.1 φ 1.5 +0.1 –0 4.5 MAX. 16.0±0.3 7.5±0.1 1.55±0.1 8.0±0.1 10.3±0.1 5.3±0.1 4.0±0.1 0.4 Tape Direction PS2503L-1-F3 PS2503L-1-F4 Outline and Dimensions (Reel) 2.0±0.5 2.0±0.5 φ 13.0±0.2 φ 330±2.0 R 1.0 φ 21.0±0.8 φ 100±1.0 17.5±1.0 21.5±1.0 Packing: 2 000 pcs/reel 15.9 to 19.4 Outer edge of flange 10 Data Sheet PN10227EJ01V0DS PS2503-1,-2,-4,PS2503L-1,-2,-4 Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.75±0.1 1.5 +0.1 –0 4.5 MAX. 16.0±0.3 7.5±0.1 10.3±0.1 1.55±0.1 12.0±0.1 10.4±0.1 0.3 4.0±0.1 Tape Direction PS2503L-2-E3 PS2503L-2-E4 Outline and Dimensions (Reel) 2.0±0.5 330±2.0 2.0±0.5 13.0±0.2 R 1.0 21.0±0.8 17.5±1.0 21.5±1.0 100±1.0 Packing: 1 000 pcs/reel 15.9 to 19.4 Outer edge of flange Data Sheet PN10227EJ01V0DS 11 PS2503-1,-2,-4,PS2503L-1,-2,-4 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature • Time of peak reflow temperature • Time of temperature higher than 220°C • Time to preheat temperature from 120 to 180°C • Number of reflows • Flux 260°C or below (package surface temperature) 10 seconds or less 60 seconds or less 120±30 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (˚C) (heating) to 10 s 260˚C MAX. 220˚C to 60 s 180˚C 120˚C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature • Time • Preheating conditions • Number of times • Flux 260°C or below (molten solder temperature) 10 seconds or less 120°C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings. 12 Data Sheet PN10227EJ01V0DS PS2503-1,-2,-4,PS2503L-1,-2,-4 USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10227EJ01V0DS 13 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.