PS2805-4

DATA SHEET PHOTOCOUPLER PS2805-1,PS2805-4 HIGH ISOLATION VOLTAGE AC INPUT RESPONSE TYPE SOP PHOTOCOUPLER TM −NEPOC Series− DESCRIPTION The PS2805-1 and PS2805-4 are optically coupled isolators containing GaAs light emitting diodes and an NPN silicon phototransistor in a plastic SOP for high density applications. This package has shield effect to cut off ambient light. FEATURES • High isolation voltage (BV = 2 500 Vr.m.s.) • Small and thin package (4,16-pin SOP, Pin pitch 1.27 mm) • High collector to emitter voltage (VCEO = 80 V) • AC input response • High-speed switching (tr = 3 µs TYP., tf = 5 µs TYP.) • UL approved: File No. E72422 (S) • VDE0884 approved (Option): PS2805-4 only • Ordering number of taping product: PS2805-1-F3, F4, PS2805-4-F3, F4 APPLICATIONS • Programmable logic controllers • Measuring instruments • Hybrid IC The information in this document is subject to change without notice. Document No. P12278EJ6V0DS00 (6th edition) Date Published May 1998 NS CP(K) Printed in Japan The mark • shows major revised points. © 1991 PS2805-1,PS2805-4 PACKAGE DIMENSIONS (in millimeters) PS2805-1 TOP VIEW 2.7±0.3 43 10.3±0.3 PS2805-4 TOP VIEW 16 15 14 13 12 11 10 9 12 1. Anode, Cathode 2. Cathode, Anode 3. Emitter 4. Collector 7.0±0.3 12345678 1. 3. 5. 7. 2. 4. 6. 8. 9. 11. 13. 15. 10. 12. 14. 16. Anode, Cathode Cathode, Anode Emitter Collector 7.0±0.3 0.15+0.10 –0.05 2.3 MAX. 2.0 0.5±0.3 1.27 0.4±0.1 0.12 M 2.3 MAX. 0.1±0.1 2.0 0.15+0.10 –0.05 0.1±0.1 4.4 1.3 4.4 1.3 0.40+0.10 –0.05 0.12 M 1.27 0.5±0.3 MARKING PS2805-1 PS2805-4 Company & Country Name Type Number Assembly lot JAPAN 5 503 Assembly lot No. 1 pin Mark PS2805-4 N 503 Last number of type No. : 5 5 03 Weekly Serial Code Assembly Year N 5 03 Weekly Serial Code Assembly Year CTR Rank Name 2 PS2805-1,PS2805-4 ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified) Parameter Symbol Ratings PS2805-1 Diode Forward Current (DC) Power Dissipation Derating Power Dissipation Peak Forward Current Transistor *1 Unit PS2805-4 ±50 mA 0.8 80 ±1 80 6 50 1.2 120 mW/°C mW/ch A V V mA/ch mW/°C mW/ch Vr.m.s. °C °C IF ∆PD/°C PD IFP VCEO VECO IC 0.6 60 Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Derating Power Dissipation ∆PC/°C PC BV TA Tstg Isolation Voltage *2 2 500 −55 to +100 −55 to +150 Operating Ambient Temperature Storage Temperature *1 PW = 100 µs, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output 3 PS2805-1,PS2805-4 ELECTRICAL CHARACTERISTICS (TA = 25 °C) Parameter Diode Forward Voltage Terminal Capacitance Transistor Coupled Collector to Emitter Dark Current Current Transfer Ratio (IC/IF) CTR Ratio *1 Symbol VF Ct ICEO CTR CTR1/ CTR2 VCE(sat) RI-O CI-O tr tf IF = ±5 mA Conditions MIN. TYP. 1.1 60 MAX. 1.4 Unit V pF V = 0 V, f = 1.0 MHz VCE = 80 V, IF = 0 mA IF = ±5 mA, VCE = 5 V IF = 5 mA, VCE = 5 V IF = ±10 mA, IC = 2 mA VI-O = 1.0 kVDC V = 0 V, f = 1.0 MHz VCC = 5 V, IC = 2 mA, RL = 100 Ω 10 11 100 80 0.3 1.0 600 3.0 0.3 nA % Collector Saturation Voltage Isolation Resistance Isolation Capacitance Rise Time Fall Time *2 V Ω 0.4 3 5 pF µs *2 *1 CTR1 = IC1/IF1, CTR2 = IC2/IF2 IF1 IF2 IC1 VCE IC2 *2 Test circuit for switching time Pulse Input IF VCC PW = 100 µs Duty Cycle = 1/10 50 Ω VOUT RL = 100 Ω 4 PS2805-1,PS2805-4 TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) 100 120 100 80 60 40 20 TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Diode Power Dissipation PD (mW) 80 PS2805-4 PS2805-1 PS2805-4 60 PS2805-1 40 0.6 mW/˚C 20 0.8 mW/˚C 1.2 mW/˚C 0 25 50 75 100 0 25 50 75 100 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) FORWARD CURRENT vs. FORWARD VOLTAGE 100 50 TA = +100 ˚C +60 ˚C +25 ˚C 80 60 FORWARD CURRENT vs. FORWARD VOLTAGE Forward Current IF (mA) Forward Current IF (mA) 40 20 0 –20 –40 –60 10 5 0 ˚C –25 ˚C –55 ˚C 1 0.5 0.1 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 –80 –1.5 –1.0 –0.5 0 0.5 1.0 1.5 Forward Voltage VF (V) Forward Voltage VF (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE Collector to Emitter Dark Current ICEO (nA) 10 000 COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 40 Collector Current IC (mA) 1 000 VCE = 80 V 40 V 24 V 10 V 5V 10 5 IF = 50 mA 20 mA 10 mA 5 mA 2 mA 1 mA 100 1 0.5 10 1 –50 –25 0 25 50 75 100 0.1 0.0 0.2 0.4 0.6 0.8 1.0 Ambient Temperature TA (˚C) Collector Saturation Voltage VCE(sat) (V) 5 PS2805-1,PS2805-4 COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE Normalized Current Transfer Ratio CTR 70 60 NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE 1.2 1.0 Collector Current IC (mA) 50 40 30 20 10 0 2 4 6 8 10 0.8 0.6 0.4 IF =5 0 mA mA 20 mA 0 1 5 mA ,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,, Normalized to 1.0 at TA = 25 ˚C, IF = 5 mA, VCE = 5 V –50 –25 0 25 50 75 100 0.2 0 Collector to Emitter Voltage VCE (V) Ambient Temperature TA (˚C) SWITCHING TIME vs. LOAD RESISTANCE 100 CURRENT TRANSFER RATIO vs. FORWARD CURRENT Current Transfer Ratio CTR (%) 300 VCE = 5 V, n=3 250 200 150 100 50 VCC = 5 V, 50 IC = 2 mA, CTR = 236 % Switching Time t (µs) tf tr td ts 10 5 1 0.5 0.1 0.01 0.05 0.1 0.5 1 5 10 0.02 0.1 1.0 10 100 Load Resistance RL (kΩ) Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE 1 000 VCC = 5 V, IF = 5 mA, CTR = 236 % tf 1.2 1.0 LONG TERM CTR DEGRADATION Switching Time t (µs) CTR (Relative Value) 100 ts 10 tr 1 td 0.8 0.6 0.4 0.2 0.0 IF = 5 mA, TA = 25 ˚C IF = 20 mA, TA = 25 ˚C IF = 5 mA, TA = 60 ˚C 0.1 1 10 100 102 103 Time (Hr) 104 105 Load Resistance RL (kΩ) 6 PS2805-1,PS2805-4 FREQUENCY RESPONSE IF = 5 mA, VCE = 5 V 0 Normalized Gain Gv –5 –10 –15 –20 300 Ω 0.5 1 2 5 10 20 50 100 200 500 RL = 1 kΩ 100 Ω Frequency f (kHz) Remark The graphs indicate nominal characteristics. 7 PS2805-1,PS2805-4 TAPING SPECIFICATIONS (in millimeters) PS2805-1 Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.55±0.1 1.75±0.1 2.5±0.1 16.0±0.3 7.5±0.1 0.3 1.55±0.1 4.0±0.1 3.3±0.1 Tape Direction PS2805-1-F3 PS2805-1-F4 5104 5104 5104 5104 Outline and Dimensions (Reel) 2.0±0.5 φ13.0±0.5 R 1.0 φ 21.0±0.8 φ 330 φ 100 5104 7.5±0.1 5104 Packing: 3 500 pcs/reel 5104 5104 5104 5104 16.4 +2.0 –0.0 8 PS2805-1,PS2805-4 PS2805-4 Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.75±0.1 1.55±0.1 2.5±0.1 7.5±0.1 16.0±0.3 1.55±0.1 12.0±0.1 7.6±0.1 0.3 Tape Direction PS2805-4-F3 PS2805-4-F4 Outline and Dimensions (Reel) 2.0±0.5 φ13.0±0.5 φ 330 R 1.0 φ 21.0±0.8 φ 100 10.45±0.1 16.4 +2.0 –0.0 Packing: 2 500 pcs/reel 9 PS2805-1,PS2805-4 RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature • Time of temperature higher than 210 °C • Number of reflows • Flux 235 °C (package surface temperature) 30 seconds or less Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (˚C) (heating) to 10 s 235 ˚C (peak temperature) 210 ˚C to 30 s 120 to 160 ˚C 60 to 90 s (preheating) Time (s) Caution Avoid removing the residual flux with chlorine-based cleaning solvent after a reflow process. Peak temperature 235 ˚C or below (2) Dip soldering • Temperature • Time • Number of times • Flux 260 °C or below (molten solder temperature) 10 seconds or less One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) 10 PS2805-1,PS2805-4 PROGRAMMABLE LOGIC CONTROLLERS EXAMPLE Purpose: In-out interface Xaxis Ya xis Servo Motor Servo Motor Sensor Amplifier Motor Controller Heater Controller Pulse Generator Controller COM PS2805–1 PS2805–4 PD4050 AC.DC Servo Motor Driver Unit M TG PG Pulse Motor Driver Unit M CRT Computer Terminal PC Terminal Printer Power Supply Programmable Logic Controller Printer FDD Controller Memory Cassette 11 PS2805-1,PS2805-4 CAUTION Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. Please do not under any circumstances break the hermetic seal. NEPOC is a trademark of NEC Corporation. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. Anti-radioactive design is not implemented in this product. M4 96. 5