PS7142L-2A

8 PIN DIP SOLID STATE RELAY PS7142-2A PS7142L-2A FEATURES • 2 CHANNEL TYPE (1 A + 1 A Output) • DESIGNED FOR AC/DC SWITCHING LINE CHANGER • SMALL PACKAGE (8 pin DIP) • LOW OFFSET VOLTAGE • PS7142L-2A: SURFACE MOUNT TYPE • UL BSI APPROVED DESCRIPTION PS7142-2A and PS7142L-2A are solid state relays containing GaAs LED on the light emitting side (input side) and MOSFETs on the output side. APPLICATIONS • TELECOMMUNICATIONS EQUIPMENT • MEASUREMENT EQUIPMENT • FA/OA EQUIPMENT ELECTRICAL CHARACTERISTICS (TA = 25°C) PART NUMBER SYMBOLS PARAMETERS Forward Voltage, IF = 10 mA Reverse Current, VR = 5 V Off-State Leakage Current, VD = 400 V Output Capacitance, V = 0 V, f = 1 MHz On-State Resistance, IF = 10 mA, IL = 10 mA On-State Resistance, IF = 10 mA, IL = 200 mA Turn-On Time Turn-Off Time IF = 10 mA, VL = 5 V, RL = 500 Ω PW ≥ 10 ms UNITS V µA µA pF/ch Ω Ω ms ms Ω pF/ch 109 1.1 0.05 140 7.5 7.0 0.5 0.03 12 10 2.0 0.2 MIN PS7142-2A, PS7142L-2A TYP 1.2 MAX 1.4 5.0 1.0 Mosfet Diode VF IR ILoff Cout Ron1 Ron2 Coupled ton toff Rl-O Cl-O Isolation Resistance, Vin-out = 1.0 kVDC Isolation Capacitance, V = 0 V, f = 1 MHz California Eastern Laboratories PS7142-2A, PS7142L-2A ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS PARAMETERS UNITS RATINGS PS7142-2A PS7142L-2A 5 50 50 1 400 200 375 1500 850 -40 to +100 -40 to +80 RECOMMENDED OPERATING CONDITIONS (TA = 25 °C) SYMBOL IF VF PARAMETER LED Operating Current LED Off Voltage UNITS MIN TYP MAX mA V 2 0 10 20 0.5 Diode VR IF PD IF (Peak) MOSFET VL IL PD Coupled BV PT TSTG TA Reverse Voltage Forward Current (DC) Power Dissipation Peak Forward Current2 Break Down Voltage Continuous Load Current Power Dissipation Isolation Voltage3 Total Power Dissipation Storage Temperature Operating Ambient Temp. V mA mW/ch A V mA mW/ch VRMS mW °C °C Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. PW = 100 µs, Duty Cycle = 1 % 3. AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output. OUTLINE DIMENSIONS (Units in mm) PS7142-2A 1. LED Anode 2. LED Cathode 3. LED Anode 4. LED Cathode 5. MOSFET 6. MOSFET 7. MOSFET 8. MOSFET PS7142L-2A 1. LED Anode 2. LED Cathode 3. LED Anode 4. LED Cathode 5. MOSFET 6. MOSFET 7. MOSFET 8. MOSFET 10.16 MAX. 8 7 6 5 10.16 MAX. 8 7 6 5 1 2 3 4 1 2 3 4 7.62 7.62 6.5±0.5 3.8 4.55 MAX MAX 2.8 MAX 0.65 1.34 ± 0.10 0.25 M 2.54 1.27 MAX 0 to 15 ˚ 1.34 ± 0.10 0.25 M 2.54 1.27 MAX 3.8 MAX 6.5±0.5 0.05 to 0.2 0.9±0.25 9.60±0.4 PS7142-2A, PS7142L-2A TYPICAL PERFORMANCE CURVES (TA = 25 °C) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 100 300 MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE Maximum Forward Current, IF (mA) 80 Maximum Load Current, IL (mA) 200 60 40 100 20 0 -25 0 25 50 75 80 100 0 -25 0 25 50 75 80 100 Ambient Temperature, TA (°C) Ambient Temperature, TA (°C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE 1.8 200 OUTPUT CAPACITANCE vs. SUPPLY VOLTAGE f = 1 MHz 1.6 Output Capacitance , Cout (pF) Forward Voltage, VF (V) 150 1.4 IF = 50 mA 1.2 30 mA 20 mA 10 mA 5 mA 1 mA 100 50 1.0 0.8 -25 0 25 50 75 100 0 20 40 60 80 100 120 Ambient Temperature, TA (°C) OFF-STATE LEAKAGE CURRENT vs. SUPPLY VOLTAGE 10-6 Supply Voltage, VCC (V) LOAD CURRENT vs. LOAD VOLTAGE 300 IF = 10 mA 200 Off-State Leakage Current, ILoff (A) TA = 80°C 10 Load Current, IL (mA) -7 100 10-8 25°C -2.0 -1.0 -100 0 1.0 2.0 10-9 -200 10 -10 -300 0 100 200 300 400 500 Supply Voltage, VCC (V) Load Voltage, VL (V) PS7142-2A, PS7142L-2A TYPICAL PERFORMANCE CURVES (TA = 25 °C) NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE ON-STATE RESISTANCE DISTRIBUTION 3.0 n = 50 pcs, IF = 10 mA, IL = 10 mA Normalized On-State Resistance, RON 3.0 Normalized to 1.0 at TA = 25°C, IF = 10 mA, IL = 10 mA 2.5 25 1.5 Number (pcs) 2.0 20 15 1.0 10 0.5 5 0.0 -25 0 0 25 50 75 100 6.5 7.0 7.5 8.0 8.5 Ambient Temperature, TA (°C) On-State Resistance, RON (Ω) TURN-ON TIME vs. FORWARD CURRENT 12 VL = 5V, RL = 500 kΩ 0.30 TURN-OFF TIME vs. FORWARD CURRENT VL = 5 V, RL = 500 Ω 0.25 Turn-on Time, Ton (ms) 10 Turn-off Time, Toff (ms) 8 0.20 6 0.15 4 0.10 2 0.05 0 5 10 15 20 25 30 0 5 10 15 20 25 30 Forward Current, IF (mA) Forward Current, IF (mA) TURN-ON TIME DISTRIBUTION 3.0 n = 50 pcs, IF = 10 mA, VL = 5 V, RL = 500 Ω 3.0 TURN-OFF TIME DISTRIBUTION n = 50 pcs, IF = 10 mA, VL = 5 V, RL = 500 Ω 25 25 Number (pcs) 15 Number (pcs) 20 20 15 10 10 5 5 0 0.3 0.4 0.5 0.6 0.7 0 0.03 0.04 Turn-on Time, Ton (ms) Turn-off Time, Toff (ms) PS7142-2A, PS7142L-2A TYPICAL PERFORMANCE CURVES (TA = 25 °C) NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE 3.0 NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE 3.0 Normalized to 1.0 at TA = 25°C, IF = 10 mA, VL = 5V, RL = 500 Ω Normalized Turn-on Time, Ton Normalized Turn-off Time, Toff 2.5 Normalized to 1.0 at TA = 25°C, IF = 10 mA, VL = 5V, RL = 500 Ω 2.5 2.0 2.0 1.5 1.5 1.0 1.0 0.5 0.5 0.0 -25 0 25 50 75 100 0.0 -25 0 25 50 75 100 Ambient Temperature, TA (°C) Ambient Temperature, TA (°C) PS7142-2A, PS7142L-2A TAPING SPECIFICATIONS (Units in mm) OUTLINE AND DIMENSIONS (TAPE) 2.0 ± 0.1 4.0 ± 0.1 1.75 ± 0.1 1.55 ± 0.1 4.3 ± 0.2 OUTLINE AND DIMENSIONS (REEL) 2.0 ± 0.5 7.5 ± 0.1 10.3 ± 0.1 16.0 ± 0.3 R1.0 φ13.0 ± 0.5 φ80.0 ± 5.0 φ21.0 ± 0.8 0.3 1.55 ± 0.1 10.4 ± 0.1 12.0 ± 0.1 16.4 -0.0 +2.0 Notes: 1. Packing : 1000 pcs/reel TAPE DIRECTION PS7142L-2A-E3 PS7142L-2A-E4 φ330 PS7142-2A, PS7142L-2A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature 235 ˚C (package surface temperature) • Time of temperature higher than 210 ˚C 30 seconds or less • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended). Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (˚C) (heating) to 10 s 235 ˚C (peak temperature) 210 ˚C to 30 s 120 to 160 ˚C 60 to 90 s (preheating) Time (s) Peak temperature 235˚ C or below (2) Dip soldering • Temperature 260 ˚C or below (molten solder temperature) • Time 10 seconds or less • Number of times One • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended). EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM 8/99 DATA SUBJECT TO CHANGE WITHOUT NOTICE