PS7241-1C-F4

8 PIN SOP 400 V BREAKDOWN VOLTAGE TRANSFER TYPE 2-CH OPTICAL COUPLED MOSFET FEATURES • 2 CHANNEL TYPE: 1a + 1b Output • DESIGNED FOR AC/DC SWITCHING LINE CHANGER • SMALL AND THIN PACKAGE: 8 PIN SOP • LOW LED OPERATING CURRENT: I F = 2 mA • LOW OFFSET VOLTAGE • AVAILABLE IN TAPE AND REEL PS7241-1C DESCRIPTION PS7241-1C is a transfer type solid state relay containing normally open (N.O.) contact and normally closed (N.C.) contact on the output side. This device is suitable for analog signal control because of its low offset and high linearity. APPLICATIONS • • • • EXCHANGE EQUIPMENT MEASUREMENT EQUIPMENT FA/OA EQUIPMENT COMMUNICATIONS EQUIPMENT • DAA (MODEM) ELECTRICAL CHARACTERISTICS (TA = 25°C) PART NUMBER SYMBOLS PARAMETERS Forward Voltage, IF = 10 mA Reverse Current, VR = 5 V Off-State Leakage Current, N.O.: IF = 0 mA, VD = 400 V N.C.: IF = 10 mA, VD = 400 V Output Capacitance N.O.: VD = 0 mA, f = 1.0 mHz N.C.: VD = 0 mA, f = 1.0 mHz, IF = 10 mA LED On-state Current NO: IL = 120 mA LED Off-state Current NC IL = 120 mA On-State Resistance, N.O.: IF = 10 mA, IL = 10 mA N.C.: IF = 0 mA, IL = 10 mA N.O.: IF = 10 mA, IL = 120 mA, t ≤10 ms N.C.: IF = 0 mA, IL = 120 mA, t ≤10 ms Turn-On Time1 Turn-Off Time1 IF = 10 mA, VO = 5 V, PW ≥ 10 ms Ω Ω ms 21 16 0.2 0.02 0.02 0.1 Ω pF/ch 109 0.4 30 25 1.0 0.2 0.2 1.0 UNITS V µA µA pF/ch 0.03 65 185 2.0 MIN PS7241-1C TYP 1.2 MAX 1.4 5 1 Diode VF IR ILoff COUT MOSFET IFon mA Coupled IFoff Ron1 Ron2 tON (N.O.) tON (N.C.) tOFF (N.O.) tOFF (N.C.) Rl-O Cl-O Isolation Resistance, VIN-OUT = 1.0 kVDC Isolation Capacitance, V = 0 V, f = 1 MHz Note: 1. Test Circuit for Switching Time: N.O. (Between Pin 5 and 6) Input 0 VO = 5 V Output VO = 5 V Output N.C. (Between Pin 7 and 8) Input 0 IF Pulse Input VL 8 PS7241-1C 7 6 5 90% 10% tON tOFF 90% 10% tOFF tON Input Monitor Rin RL VO Monitor 1 2 3 4 California Eastern Laboratories PS7241-1C ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS PARAMETERS Diode VR Reverse Voltage IF Forward Current (DC) PD Power Dissipation IF (Peak) Peak Forward Current2 MOSFET VL Break Down Voltage IL Continuous Load Current ILP Pulse Load Current4 (AC/DC Current) PD Power Dissipation Coupled BV Isolation Voltage3 PT Total Power Dissipation TSTG Storage Temperature TA Ambient Temperature UNITS V mA mW/ch A V mA mA mW/ch Vr.m.s. mW °C °C RATINGS 5 50 50 1 400 120 200 180 1500 460 -40 to +100 -40 to +80 RECOMMENDED OPERATING CONDITIONS (TA = 25 °C) SYMBOL IF VF PARAMETER LED Operating Current LED Off Voltage UNITS MIN TYP MAX mA V 2 0 10 20 0.5 OUTLINE DIMENSIONS (Units in mm) 0.4±0.3 9.08±0.5 (TOP VIEW) 8 7 6 5 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. PW = 100 µs, Duty Cycle = 1 % 3. AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output. 4. PW = 100 ms, 1 shot. 1 2 3 4 7.0±0.3 4.4 0.15 +0.10 -0.05 -0.08 2.05+0.05 -0.08 0.5 +0.05 2.54 0.40 -0.10 +0.05 ORDERING INFORMATION PART NUMBER PS7241-1C PS7241-1C-F3 PS7241-1C-F4 PACKAGE 8 pin SOP PACKING STYLE Magazine case 45 pcs Embossed tape 1500 pcs/reel 0.5 ± 0.3 1. LED Anode 2. LED Cathode 3. LED Anode 4. LED Cathode 5. MOSFET (N.O.) 6. MOSFET (N.O.) 7. MOSFET (N.C.) 8. MOSFET (N.C.) TYPICAL PERFORMANCE CURVES (TA = 25 °C) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 100 300 MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE Maximum Forward Current, IF (mA) 80 Maximum Load Current, IL (mA) 200 60 40 100 20 0 -25 0 25 50 75 80 100 0 -25 0 25 50 75 80 100 Ambient Temperature, TA (°C) Ambient Temperature, TA (°C) PS7241-1C TYPICAL PERFORMANCE CURVES (TA = 25 °C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE 1.8 200 f = 1 MHz OUTPUT CAPACITANCE vs. APPLIED VOLTAGE Forward Voltage, VF (V) 1.6 Output Capacitance, Cout (pF) 150 1.4 IF = 50 mA 1.2 30 mA 20 mA 10 mA 5 mA 1 mA 100 N.C. N.O. 50 1.0 0.8 -25 0 25 50 75 100 0 20 40 60 80 100 120 Ambient Temperature, TA (°C) Applied Voltage, VD (V) OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE 10-5 LOAD CURRENT vs. LOAD VOLTAGE 200 Off-State Leakage Current, ILoff (A) TA = 80°C 10 10 -7 Load Current, IL (mA) -6 100 25°C -4.0 -2.0 0 2.0 4.0 10 -8 -100 N.O.: IF = 0 mA, N.C.: IF = 10 mA 10 -9 N.O.: IF = 10 mA, N.C.: IF = 0 mA 500 0 100 200 300 400 -200 Applied Voltage, VD (V) Load Voltage, VL (V) TURN-ON TIME vs. FORWARD CURRENT 1.2 VO = 5 V 1.0 TURN-OFF TIME vs. FORWARD CURRENT 1.2 VO = 5 V 1.0 0.8 Turn-Off Time, tOFF (ms) Turn-On Time, tON (ms) 0.8 0.6 0.6 0.4 N.O. 0.2 N.C. 0 5 10 15 20 25 30 0.4 N.C. 0.2 N.O. 0.0 5 10 15 20 25 30 Forward Current, IF (mA) Forward Current, IF (mA) PS7241-1C TYPICAL PERFORMANCE CURVES (TA = 25 °C) NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE 3.0 3.0 NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE Normalized Turn-Off Time, tOFF Normalized Turn-On Time, tON 2.5 Normalized to 1.0 at TA = 25°C, IF = 10 mA, VO = 5 V 2.5 Normalized to 1.0 at TA = 25°C, IF = 10 mA, VO = 5V 2.0 N.O. 2.0 N.C. 1.5 N.O. 1.0 1.5 1.0 N.C. 0.5 0.5 0.0 0.0 -25 0 25 50 75 100 -25 0 25 50 75 100 Ambient Temperature, TA (°C) Ambient Temperature, TA (°C) NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE ON-STATE RESISTANCE (N.O.) DISTRIBUTION 3.0 n = 50 pcs, IF = 10 mA, IL = 10 mA Normalized On-State Resistance, RON 3.0 Normalized to 1.0 at TA = 25°C, IF = 10 mA, IL = 10 mA (N.O.), IF = 0 mA, IL = 10 mA (N.C.) 2.5 25 Number (pcs) 2.0 N.O. 1.5 N.C. 20 15 1.0 10 0.5 5 0.0 -25 0 0 25 50 75 100 19 20 21 22 23 Ambient Temperature, TA (°C) On-State Resistance, Ron (Ω) ON-STATE RESISTANCE (N.C.) DISTRIBUTION 3.0 n = 50 pcs, IF = 0 mA, IL = 10 mA 3.0 TURN-ON TIME (N.O) DISTRIBUTION n = 50 pcs, IF = 10 mA, VO = 5 V 25 25 Number (pcs) Number (pcs) 20 20 15 15 10 10 5 5 0 19 20 21 22 23 0 0.2 0.3 On-State Resistance, Ron (Ω) Turn-On Time, tON (ms) PS7241-1C TYPICAL PERFORMANCE CURVES (TA = 25 °C) TURN-ON TIME (N.C) DISTRIBUTION 3.0 n = 50 pcs, IF = 10 mA, VO = 5 V 3.0 n = 50 pcs, IF = 10 mA, VO = 5 V TURN-OFF TIME (N.O) DISTRIBUTION 25 25 Number (pcs) 15 Number (pcs) 0.02 0.04 20 20 15 10 10 5 5 0 0 0.02 0.04 Turn-On Time, tON (ms) Turn-Off Time, tOFF (ms) TURN-OFF TIME (N.C) DISTRIBUTION 3.0 n = 50 pcs, IF = 10 mA, VO = 5 V 25 Number (pcs) 20 15 10 5 0 0.1 0.2 Turn-Off Time, tOFF (ms) PS7241-1C TAPING SPECIFICATIONS (Units in mm) OUTLINE AND DIMENSIONS (TAPE) 2.0 ± 0.1 1.75 ± 0.1 4.0 ± 0.1 1.55 ± 0.1 2.8 ± 0.1 φ21.0 ± 0.8 OUTLINE AND DIMENSIONS (REEL) 7.5 ± 0.1 10.45 ± 0.1 16.0 ± 0.3 φ330 2.0 ± 0.5 0.3 1.55 ± 0.1 7.6 ± 0.1 12.0 ± 0.1 16.4 -0.0 +2.0 Packing : 1500 pcs/reel TAPING DIRECTION PS7241-1C-F3 PS7241-1C-F4 φ13.0±1.0 φ100±5.0 PS7241-1C RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature • Time of temperature higher than 210 °C • Number of reflows • Flux 235 °C or below (package surface temperature) 30 seconds or less Two Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (˚C) (heating) to 10 s 235 ˚C (peak temperature) 210 ˚C to 30 s 100 to 160 ˚C 60 to 120 s (preheating) Time (s) (2) Dip soldering • Temperature • Time • Number of times • Flux 260 °C or below (molten solder temperature) 10 seconds or less One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. • Avoid shorting between portion of frame and leads. * * *: Portion of frame EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM 07/16/2001 DATA SUBJECT TO CHANGE WITHOUT NOTICE