PS7241E-1A-A

DATA SHEET Solid State Relay OCMOS FET PS7241E-1A 4-PIN SOP 400 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE −NEPOC Series− 1-ch Optical Coupled MOS FET DESCRIPTION The PS7241E-1A is an optically coupled element that combines a GaAs infrared LED on the input side with a normally-open MOS FET on the output side to realize an excellent cost performance. The small, thin package and high sensitivity of this element makes it ideal for battery-driven mobile devices, and its small offset voltage at power-on and good linearity are also make it suitable for controlling micro analog signals. FEATURES • Small and thin package (4-pin SOP, Height = 2.1 mm) • 1 channel type (1 a output) • Designed for AC/DC switching line changer • Low offset voltage • Ordering number of taping product: PS7241E-1A-E3, E4, F3, F4 • Pb-Free product • Safety standards • UL approved: No. E72422 • BSI approved: No. 8241/8242 1 4 PIN CONNECTION (Top View) 3 1. LED Anode 2. LED Cathode 3. MOS FET 4. MOS FET 2 APPLICATIONS • Laptop PC, PDA • Modem card • Telephone, FAX • Measurement equipment The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. PN10459EJ03V0DS (3rd edition) Date Published October 2008 NS Printed in Japan The mark shows major revised points. 2004, 2008 The revised points can be easily searched by copying an "" in the PDF file and specifying it in the "Find what:" field. PS7241E-1A PACKAGE DIMENSIONS (UNIT: mm) 4.0±0.5 7.0±0.3 4.4 0.15+0.10 –0.05 2.05+0.08 –0.05 0.05+0.08 –0.05 2.54 0.40+0.10 –0.05 0.25 M 0.5±0.3 MARKING EXAMPLE 41EA N 801 No. 1 pin Mark Initial of NEC (Engraved mark) N Assembly Lot *1 N 8 01 Week Assembled Year Assembled (Last 1 Digit) Rank Code *1 Bar : Pb-Free 2 Data Sheet PN10459EJ03V0DS PS7241E-1A ORDERING INFORMATION Part Number Order Number Solder Plating Specification PS7241E-1A PS7241E-1A-E3 PS7241E-1A-E4 PS7241E-1A-F3 PS7241E-1A-F4 PS7241E-1A-A PS7241E-1A-E3-A PS7241E-1A-E4-A PS7241E-1A-F3-A PS7241E-1A-F4-A Embossed Tape 3 500 pcs/reel Pb-Free Magazine case 100 pcs Embossed Tape 900 pcs/reel Packing Style Safety Standard Approval Standard products (UL, BSI approved) Application Part Number *1 PS7241E-1A *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Parameter Diode Forward Current (DC) Reverse Voltage Power Dissipation Peak Forward Current MOS FET Break Down Voltage Continuous Load Current Pulse Load Current (AC/DC Connection) Power Dissipation Isolation Voltage *3 *2 *1 Symbol IF VR PD IFP VL IL ILP PD BV PT TA Tstg Ratings 50 5.0 50 1 400 120 240 300 1 500 350 −40 to +85 −40 to +100 Unit mA V mW A V mA mA mW Vr.m.s. mW °C °C Total Power Dissipation Operating Ambient Temperature Storage Temperature *1 PW = 100 μs, Duty Cycle = 1% *2 PW = 100 ms, 1 shot *3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output. Pins 1-2 shorted together, 3-4 shorted together. Data Sheet PN10459EJ03V0DS 3 PS7241E-1A RECOMMENDED OPERATING CONDITIONS (TA = 25°C) Parameter LED Operating Current LED Off Voltage Symbol IF VF MIN. 4 0 TYP. 10 MAX. 20 0.5 Unit mA V ELECTRICAL CHARACTERISTICS (TA = 25°C) Parameter Diode Forward Voltage Reverse Current MOS FET Off-state Leakage Current Symbol VF IR ILoff IF = 10 mA VR = 5 V VD = 400 V Conditions MIN. TYP. 1.2 MAX. 1.4 5.0 1.0 Unit V μA μA pF Coupled Output Capacitance LED On-state Current On-state Resistance Cout IFon Ron1 Ron2 VD = 0 V, f = 1 MHz IL = 120 mA IF = 10 mA, IL = 10 mA IF = 10 mA, IL = 120 mA, t ≤ 10 ms IF = 10 mA, VO = 5 V, RL = 500 Ω, PW ≥ 10 ms VI-O = 1.0 kVDC V = 0 V, f = 1 MHz 10 9 18 4.0 22 17 0.5 0.07 35 23 1.0 0.2 mA Ω Turn-on Time Turn-off Time *1, 2 ton toff RI-O CI-O ms *1, 2 Isolation Resistance Isolation Capacitance Ω 0.5 pF *1 Test Circuit for Switching Time IF Pulse Input VL Input 50% 0 VO = 5 V Input monitor Rin RL VO monitor 90% Output 10% ton toff *2 The turn-on time and turn-off time are specified as input-pulse width ≥ 10 ms. Be aware that when the device operates with an input-pulse width less than 10 ms, the turn-on time and turn-off time will increase. 4 Data Sheet PN10459EJ03V0DS PS7241E-1A TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 100 Maximum Forward Current IF (mA) Maximum Load Current IL (mA) MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE 300 80 200 60 40 100 20 0 –25 0 25 50 75 85 100 0 –25 0 25 50 75 85 100 Ambient Temperature TA (°C) Ambient Temperature TA (°C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE 1.8 Output Capacitance Cout (pF) OUTPUT CAPACITANCE vs. APPLIED VOLTAGE 200 f = 1 MHz Forward Voltage VF (V) 1.6 1.4 IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA 150 100 1.2 1.0 50 0.8 –25 0 25 50 75 100 0 20 40 60 80 100 120 Ambient Temperature TA (°C) Applied Voltage VD (V) OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE 10–6 Off-state Leakage Current ILoff (A) LOAD CURRENT vs. LOAD VOLTAGE 200 IF = 10 mA 10 –7 TA = 85°C Load Current IL (mA) 100 10–8 10–9 25°C –4.0 –2.0 –100 0 2.0 4.0 10 –10 10–11 10–12 0 –200 Load Voltage VL (V) 100 200 300 400 500 Applied Voltage VD (V) Remark The graphs indicate nominal characteristics. Data Sheet PN10459EJ03V0DS 5 PS7241E-1A ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE 40 35 30 25 20 15 10 5 0 –50 –25 0 25 50 75 100 ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE 40 35 30 25 20 15 10 5 0 –50 –25 0 25 50 75 100 IF = 10 mA, IL = 10 mA IF = 10 mA, IL = 120 mA On-state Resistance Ron1 (Ω) Ambient Temperature TA (°C) On-state Resistance Ron2 (Ω) Ambient Temperature TA (°C) TURN-ON TIME vs. AMBIENT TEMPERATURE 1 000 900 TURN-OFF TIME vs. AMBIENT TEMPERATURE 200 180 Turn-on Time ton (μ s) 700 600 500 400 300 200 100 0 –50 –25 0 25 50 75 100 Turn-off Time toff (μs) 800 IF = 10 mA, VL = 5 V, RL = 500 Ω 160 140 120 100 80 60 40 20 0 –50 –25 0 25 50 IF = 10 mA, VL = 5 V, RL = 500 Ω 75 100 Ambient Temperature TA (°C) Ambient Temperature TA (°C) TURN-ON TIME vs. FORWARD CURRENT 3.0 2.5 VL = 5 V, RL = 500 Ω TURN-OFF TIME vs. FORWARD CURRENT 0.30 0.25 VL = 5 V, RL = 500 Ω 2.0 TA = +85°C Turn-off Time toff (ms) Turn-on Time ton (ms) 0.20 0.15 0.10 0.05 TA = –40°C 1.5 1.0 0.5 +25°C –40°C +25°C +85°C 0 5 10 15 20 25 0 5 10 15 20 25 Forward Current IF (mA) Forward Current IF (mA) Remark The graphs indicate nominal characteristics. 6 Data Sheet PN10459EJ03V0DS PS7241E-1A ON-STATE RESISTANCE DISTRIBUTION 30 25 Number (pcs) ON-STATE RESISTANCE DISTRIBUTION 30 25 Number (pcs) n = 50 pcs, IF = 10 mA, IL = 10 mA n = 50 pcs, IF = 10 mA, IL = 120 mA 20 15 10 5 0 20 15 10 5 0 21.6 21.8 22 22.2 22.4 22.6 22.8 23 17 17.2 17.4 17.6 17.8 18 On-state Resistance Ron1 (Ω) On-state Resistance Ron2 (Ω) TURN-ON TIME DISTRIBUTION 40 35 30 Number (pcs) TURN-OFF TIME DISTRIBUTION 40 35 30 Number (pcs) n = 50 pcs, IF = 10 mA, VO = 5 V, RL = 500 Ω n = 50 pcs, IF = 10 mA, VO = 5 V, RL = 500 Ω 25 20 15 10 5 0 0.2 0.3 0.4 0.5 0.6 0.7 25 20 15 10 5 0 0.03 0.04 0.05 0.06 0.07 0.08 Turn-on Time ton (ms) Turn-off Time toff (ms) Remark The graphs indicate nominal characteristics. Data Sheet PN10459EJ03V0DS 7 PS7241E-1A TAPING SPECIFICATIONS (in millimeters) Outline and Dimensions (Tape) 2.0±0.05 4.0±0.1 1.75±0.1 1.5+0.1 –0 2.9 MAX. 12.0±0.2 5.5±0.05 1.55±0.1 8.0±0.1 7.4±0.1 4.6±0.1 2.4±0.1 0.3 Tape Direction PS7241E-1A-E3 PS7241E-1A-E4 Outline and Dimensions (Reel) 2.0±0.5 2.0±0.5 φ13.0±0.2 φ 180+0 –1.5 R 1.0 φ 21.0±0.8 13.5±1.0 17.5±1.0 φ 60 +1 –0 Packing: 900 pcs/reel 11.9 to 15.4 Outer edge of flange 8 Data Sheet PN10459EJ03V0DS PS7241E-1A Outline and Dimensions (Tape) 2.0±0.05 4.0±0.1 1.75±0.1 1.5+0.1 –0 2.9 MAX. 12.0±0.2 5.5±0.05 1.55±0.1 8.0±0.1 7.4±0.1 4.6±0.1 2.4±0.1 0.3 Tape Direction PS7241E-1A-F3 PS7241E-1A-F4 Outline and Dimensions (Reel) 2.0±0.5 φ 330±2.0 2.0±0.5 φ13.0±0.2 φ 100±1.0 R 1.0 φ 21.0±0.8 φ 13.0±0.2 13.5±1.0 17.5±1.0 Packing: 3 500 pcs/reel 11.9 to 15.4 Outer edge of flange Data Sheet PN10459EJ03V0DS 9 PS7241E-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature • Time of peak reflow temperature • Time of temperature higher than 220°C • Time to preheat temperature from 120 to 180°C • Number of reflows • Flux 260°C or below (package surface temperature) 10 seconds or less 60 seconds or less 120±30 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (°C) (heating) to 10 s 260°C MAX. 220°C to 60 s 180°C 120°C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature • Time • Preheating conditions • Number of times • Flux 260°C or below (molten solder temperature) 10 seconds or less 120°C or below (package surface temperature) One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron • Peak temperature (lead part temperature) • Time (each pins) • Flux 350°C or below 3 seconds or less Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100°C. (4) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 10 Data Sheet PN10459EJ03V0DS PS7241E-1A USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10459EJ03V0DS 11 PS7241E-1A • T he information in this document is current as of October, 2008. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. • No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. • NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. • Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. • While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. • NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1 12 Data Sheet PN10459EJ03V0DS PS7241E-1A Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. • Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. • Do not burn, destroy, cut, crush, or chemically dissolve the product. • Do not lick the product or in any way allow it to enter the mouth.