PS7341B-1B

PRELIMINARY DATA SHEET 6 PIN DIP LOW OUTPUT PS7341B-1B CAPACITANCE, LOW ON-STATE PS7341BL-1B RESISTANCE, SOLID STATE RELAY FEATURES • HIGH ISOLATION VOLTAGE BV = 3,750 Vr.m.s. • 1 CHANNEL TYPE 1 B output • DESIGNED FOR AC/DC SWITCHING LINE CHANGER • SMALL PACKAGE 6 pin DIP • LOW OUTPUT CAPACITANCE Cout = 50 pF TYP • LOW ON-STATE RESISTANCE Ron2 = 35 Ω TYP • LOW LED OPERATING CURRENT I F = 2 mA • LOW OFFSET VOLTAGE • SURFACE MOUNT TYPE LEAD AVAILABLE PS7341BL-1B DESCRIPTION The PS7341B-1B and PS7341BL-1B are solid state relays containing a GaAs LED on the light emitting side (input side) and normally close (N.C.) contact MOSFETs on the output side. They are suitable for analog signal control because of their low offset and high linearity. APPLICATIONS • EXCHANGE EQUIPMENT • MEASUREMENT EQUIPMENT • FA/OA EQUIPMENT ELECTRICAL CHARACTERISTICS (TA = 25°C) PART NUMBER SYMBOLS PARAMETERS Forward Voltage, IF = 10 mA Reverse Current, VR = 5 V Off-State Leakage Current, IF = 10 mA, VD = 400 V Output Capacitance, IF = 10 mA, VD = 0 V, f = 1 MHz On-State Resistance, IL = 0 mA, IL = 10 mA On-State Resistance, IL = 0 mA, IL = 90 mA, t ≤ 10 ms Turn-On Time1 Turn-Off Time1 Isolation Resistance, VI-O = 1.0 kVDC Isolation Capacitance, V = 0 V, f = 1 MHz IF = 10 mA, VO = 5 V, PW ≥ 10 ms UNITS V µA µA pF Ω Ω ms ms Ω pF 109 1.1 50 50 35 70 55 0.2 1.5 MIN PS7341-1B, PS7341L-1B TYP 1.2 MAX 1.4 5.0 10 MOS Diode FET VF IR ILOFF COUT RON1 RON2 Coupled tON tOFF Rl-O Cl-O Notes: 1. Test Circuit for switching Time PS7341B-1B, PS7341BL-1B IF Pulse Input VL Input 50% 0 Vo = 5 V 90% 10% Input monitor Rin RL Vo monitor Output tOFF tON California Eastern Laboratories PS7341B-1B, PS7341BL-1B ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS PARAMETERS UNITS RATINGS PS7341B-1B PS7341BL-1B 5.0 50 50 1 400 90 120 180 mA mW Vr.m.s. mW °C °C 180 560 3,750 610 -40 to +125 -40 to +85 4.15±0.3 3.5±0.3 MAX MAX 3.3±0.3 MAX 0.5±0.1 1.34 ± 0.1 0.25 M 2.54 2.54 MAX 0 to 15 ˚ 7.62 6.5±0.5 1 2 3 OUTLINE DIMENSIONS (Units in mm) PS7341B-1B 1. LED Anode 3. NC 4. MOSFET Drain 6. MOSFET Drain Diode VR IF PD IFP MOSFET VL IL 2. LED Cathode 5. MOSFET Source Reverse Voltage Forward Current (DC) Power Dissipation Peak Forward Current2 Break Down Voltage Continuous Load Current3 Connection A Connection B Connection C V mA mW A V mA 9.25±0.5 (Top View) 6 5 4 ILP PD Coupled BV PT TSTG TA Pulse Load Current4 Power Dissipation Isolation Voltage5 Total Power Dissipation Storage Temperature Operating Ambient Temp. Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. PW = 100 µs, Duty Cycle = 1% 3. Conditions: IF ≥ 2 mA. The following types of loaad connections are available. 1 2 3 1 2 3 1 2 3 1 2 3 6 5 4 6 5 4 6 5 4 6 5 4 IL IL L L IL + IL PS7341BL-1B 1. LED Anode 4. MOSFET Drain 6. MOSFET Drain Connection A IL VL (AC/DC) L L + VL (DC) 9.25±0.5 MAX. 2. LED Cathode 5. MOSFET Source 3. NC IL (Top View) 6 5 4 Connection B + VL (DC) Connection C + VL (DC) - 1 2 3 IL 7.62 6.5±0.5 3.5±0.3 MAX 0.10 +0.10 -0.05 0.9±0.25 9.60±0.4 4. PW = 100 ms, 1 shot 5. AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output. RECOMMENDED OPERATING CONDITIONS (TA = 25 °C) SYMBOL IF VF PARAMETER LED Operating Current LED Off Voltage UNITS MIN TYP MAX mA V 2 0 10 20 0.5 1.34 ± 0.1 0.25 M 2.54 2.54 MAX EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM 12/11/2000 DATA SUBJECT TO CHANGE WITHOUT NOTICE