PS7360L-1A-E3

DATA SHEET Solid State Relay OCMOS FET PS7360-1A,PS7360L-1A 6-PIN DIP, HIGH ISOLATION VOLTAGE 1-ch Optical Coupled MOS FET DESCRIPTION The PS7360-1A and PS7360L-1A are solid state relays containing GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side. They are suitable for analog signal control because of their low offset and high linearity. The PS7360L-1A has a surface mount type lead. FEATURES • High isolation voltage (BV = 3 750 Vr.m.s.) • 1 channel type (1 a output) • Low LED operating current (IF = 2 mA) • Designed for AC/DC switching line changer • Small package (6-pin DIP) • Low offset voltage • PS7360L-1A: Surface mount type • UL approved: File No. E72422 (S) • BSI approved: No. 8252/8253 • CSA approved: No. CA 101391 APPLICATIONS • Exchange equipment • Measurement equipment • FA/OA equipment The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. Document No. P11567EJ6V0DS00 (6th edition) Date Published October 1999 NS CP(K) Printed in Japan The mark • shows major revised points. © 1996, 1999 PS7360-1A,PS7360L-1A PACKAGE DIMENSIONS (in millimeters) PS7360-1A 9.25±0.5 6 5 4 TOP VIEW 1. LED Anode 2. LED Cathode 3. NC 4. MOS FET Drain 5. MOS FET Source 6. MOS FET Drain 1 2 3 7.62 6.5±0.5 3.3±0.3 4.15±0.3 3.5±0.3 0.5±0.1 1.34±0.1 0.25 M 0 to 15˚ 2.54 PS7360L-1A 9.25±0.5 6 5 4 TOP VIEW 1. LED Anode 2. LED Cathode 3. NC 4. MOS FET Drain 5. MOS FET Source 6. MOS FET Drain 1 2 3 6.5±0.5 3.5±0.3 0.10+0.10 –0.05 1.34±0.1 0.25 M 2.54 0.9±0.25 9.60±0.4 2 Data Sheet P11567EJ6V0DS00 PS7360-1A,PS7360L-1A ORDERING INFORMATION Part Number PS7360-1A PS7360L-1A PS7360L-1A-E3 PS7360L-1A-E4 Embossed Tape 1 000 pcs/reel Package 6-pin DIP Packing Style Magazine case 50 pcs Application Part Number PS7360-1A PS7360L-1A *1 *1 For the application of the Safety Standard, following part number should be used. Data Sheet P11567EJ6V0DS00 3 PS7360-1A,PS7360L-1A ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified) Parameter Diode Forward Current (DC) Reverse Voltage Power Dissipation Peak Forward Current MOS FET Break Down Voltage Continuous Load Current *2 *1 Symbol IF VR PD IFP VL Connection A Connection B Connection C IL Ratings 50 5.0 50 1 600 90 130 200 Unit mA V mW A V mA Pulse Load Current *3 ILP 250 mA (AC/DC Connection) Power Dissipation Isolation Voltage *4 PD BV PT TA Tstg 560 3 750 610 −40 to +85 −40 to +125 mW Vr.m.s. mW °C °C Total Power Dissipation Operating Ambient Temperature Storage Temperature *1 PW = 100 µs, Duty Cycle = 1 % *2 Conditions: IF ≥ 2 mA. The following types of load connections are available. 1 2 3 1 2 3 1 2 3 1 2 3 6 5 4 6 5 4 6 5 4 6 5 4 IL IL L L IL + IL IL – + VL (DC) + VL (DC) – IL VL (AC/DC) L L + VL (DC) – Connection A IL Connection B Connection C *3 PW = 100 ms, 1 shot *4 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output 4 Data Sheet P11567EJ6V0DS00 PS7360-1A,PS7360L-1A RECOMMENDED OPERATING CONDITIONS (TA = 25 °C) Parameter LED Operating Current LED Off Voltage Symbol IF VF MIN. 2 0 TYP. 10 MAX. 20 0.5 Unit mA V ELECTRICAL CHARACTERISTICS (TA = 25 °C) Parameter Diode Forward Voltage Reverse Current MOS FET Off-state Leakage Current Output Capacitance Coupled LED On-state Current On-state Resistance Symbol VF IR ILoff Cout IFon Ron1 Ron2 Turn-on Time Turn-off Time *1 Conditions IF = 10 mA VR = 5 V VD = 600 V VD = 0 V, f = 1 MHz IL = 90 mA IF = 10 mA, IL = 10 mA IF = 10 mA, IL = 90 mA, t ≤ 10 ms IF = 10 mA, VO = 5 V, PW ≥ 10 ms MIN. TYP. 1.2 MAX. 1.4 5.0 Unit V µA µA pF 0.03 110 1.0 2.0 41 33 0.6 0.03 50 45 2.0 0.2 mA Ω ton toff RI-O CI-O ms *1 Isolation Resistance Isolation Capacitance VI-O = 1.0 kVDC V = 0 V, f = 1 MHz 10 9 Ω 1.1 pF *1 Test Circuit for Switching Time IF Pulse Input VL Input 50 % 0 VO = 5 V Input monitor Rin RL VO monitor Output 90 % 10 % ton toff Data Sheet P11567EJ6V0DS00 5 PS7360-1A,PS7360L-1A TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 100 Maximum Forward Current IF (mA) Maximum Load Current IL (mA) MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE 150 125 100 75 50 25 0 –25 80 60 40 20 0 –25 0 25 50 7580 100 0 25 50 75 85 100 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE 1.6 Output Capacitance Cout (pF) OUTPUT CAPACITANCE vs. APPLIED VOLTAGE 250 f = 1 MHz 200 Forward Voltage VF (V) 1.4 IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA 150 1.2 100 1.0 50 0.8 –25 0 25 50 75 100 0 20 40 60 80 100 120 Ambient Temperature TA (˚C) Applied Voltage VD (V) OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE 10–3 Off-state Leakage Current ILoff (A) LOAD CURRENT vs. LOAD VOLTAGE 150 IF = 10 mA 100 Load Current IL (mA) 10–4 10 –5 TA = 80 ˚C 50 10–6 10 –7 –4.0 –2.0 –50 –100 –150 0 2.0 4.0 25 ˚C 10–8 10–9 0 100 200 300 400 500 600 Applied Voltage VD (V) Load Voltage VL (V) 6 Data Sheet P11567EJ6V0DS00 PS7360-1A,PS7360L-1A NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE 3.0 Normalized On-state Resistance Ron ON-STATE RESISTANCE DISTRIBTION 30 n = 50 pcs, IF = 10 mA, IL = 10 mA 2.5 2.0 1.5 1.0 0.5 0.0 –25 Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, IL = 10 mA Number (pcs) 25 20 15 10 5 0 0 25 50 75 100 40 41 Ambient Temperature TA (˚C) On-state Resistance Ron (Ω) TURN-ON TIME vs. FORWARD CURRENT 8.0 VO = 5 V Turn-on Time ton (ms) TURN-OFF TIME vs. FORWARD CURRENT 0.5 VO = 5 V Turn-off Time toff (ms) 0.4 6.0 0.3 4.0 0.2 2.0 0.1 0 10 20 30 0 10 20 30 Forward Current IF (mA) Forward Current IF (mA) TURN-ON TIME DISTRIBUTION 30 25 Number (pcs) TURN-OFF TIME DISTRIBUTION 30 n = 50 pcs, IF = 10 mA, VO = 5 V n = 50 pcs, IF = 10 mA, VO = 5 V Number (pcs) 25 20 15 10 5 0 20 15 10 5 0 0.5 0.6 0.03 0.05 Turn-on Time ton (ms) Turn-off Time toff (ms) Data Sheet P11567EJ6V0DS00 7 PS7360-1A,PS7360L-1A NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE 3.0 Normalized Turn-on Time ton NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE 3.0 Normalized Turn-off Time toff 2.5 2.0 1.5 1.0 0.5 0.0 –25 Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, VO = 5 V 2.5 2.0 1.5 1.0 0.5 0.0 –25 Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, VO = 5 V 0 25 50 75 100 0 25 50 75 100 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) Remark The graphs indicate nominal characteristics. 8 Data Sheet P11567EJ6V0DS00 PS7360-1A,PS7360L-1A TAPING SPECIFICATIONS (in millimeters) Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.75±0.1 1.55±0.1 4.3±0.2 16.0±0.3 10.3±0.1 7.5±0.1 1.55±0.1 12.0±0.1 10.4±0.1 0.3 Tape Direction PS7360L-1A-E3 PS7360L-1A-E4 Outline and Dimensions (Reel) 1.5 2.0±0.5 φ 13.0±0.5 R 1.0 φ 21.0±0.8 φ 80.0±5.0 φ 330 16.4 +2.0 –0.0 Packing: 1 000 pcs/reel Data Sheet P11567EJ6V0DS00 9 PS7360-1A,PS7360L-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature • Time of temperature higher than 210 °C • Number of reflows • Flux 235 °C (package surface temperature) 30 seconds or less One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (˚C) (heating) to 10 s 235 ˚C (peak temperature) 210 ˚C to 30 s 100 to 160 ˚C 60 to 120 s (preheating) Time (s) (2) Dip soldering • Temperature • Time • Number of times • Flux 260 °C or below (molten solder temperature) 10 seconds or less One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. • Products in dry pack After opening the dry pack, solder the products within the valid storage period specified on the label on the dry pack. 10 Data Sheet P11567EJ6V0DS00 PS7360-1A,PS7360L-1A [MEMO] Data Sheet P11567EJ6V0DS00 11 PS7360-1A,PS7360L-1A CAUTION Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. Please do not under any circumstances break the hermetic seal. • The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. • N o part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. • NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. • D escriptions of circuits, software, and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software, and information in the design of the customer's equipment shall be done under the full responsibility of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third parties arising from the use of these circuits, software, and information. • While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. • NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. M7 98. 8