PS7802-1A-F4

NEC's 4-PIN ULTRA SMALL FLAT-LEAD, LOW OUTPUT CAPACITANCE PS7802-1A 1-CH OPTICAL COUPLED MOSFET FEATURES • LOW C x R : C x R = 12.6 pF • Ω • 1 CHANNEL TYPE: 1a output • LOW ON-STATE RESISTANCE: Ron = 1.1 Ω TYP • HIGH PASS CHARACTERISTICS: ERT = 45 ps TYP • DESIGNED FOR AC/DC SWITCHING LINE CHANGER • ULTRA SMALL FLAT-LEAD PACKAGE: 4.2 (L) X 2.5 (W) X 1.85 (H) mm • LOW OFFSET VOLTAGE • ORDERING NUMBER OF TAPING PRODUCT: PS7801-1A-F3, F4 (3 500 pcs/reel) DESCRIPTION NEC's PS7802-1A is a low output capacitance solid state relay containing GaAs LEDs on the light emitting side (input side) and MOSFETs on the output side. An ultra small ßat-lead package has been provided which realizes a reduction in mounting area about 50% compared with the PS72xx series. It is suitable for high frequency signal control, due to its low C x R, low on-state resistance, and low off-state leakage current. APPLICATIONS • MEASUREMENT EQUIPMENT ELECTRICAL CHARACTERISTICS (TA = 25 °C) PART NUMBER SYMBOLS Diode VF IR MOS FET ILOFF Cout RON tON tOFF RI-O CI-O ERT PARAMETERS Forward Voltage, IF = 5 mA Reverse Current, VR = 5 V Off-State Leakage Current, VD = 40 V Output Capacitance, VD = 0 V, f = 1 MHz On-State Resistance, IF = 5 mA, IL = 250 mA Turn-on Time, IF = 5 mA, VO = 5 V, RL = 500 Ω, PW ≥ 10 ms Turn-off Time, IF = 5 mA, VO = 5 V, RL = 500 Ω, PW ≥ 10 ms Isolation Resistance, VI-O = 0.5 k VDC Isolation Capacitance, V = 0 V, f = 1 MHz Equivalent Rise Time, IF = 10 mA, tr (in) = 25.0 ps, V = 250 mV, 50 Ω termination IF Pulse Input VL PS7802-1A MIN TYP 1.1 MAX 1.4 5.0 0.1 11.5 1.1 0.1 0.08 109 0.3 45 1.6 0.5 0.50 1 UNITS V μA nA pF Ω ms ms Ω pF ps 1. Test Circuit for Switching Time Input 50% 0 Input monitor Rin RL Vo monitor VO = 5 V Output 90% 10% ton toff 2. The turn-on time and turn-off time are speciÞed as input-pulse width ≥ 10 ms. Please note that when the device operates with an input-pulse of under 10 ms, the turn-on time and turn-off time will increase California Eastern Laboratories PS7802-1A ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS IF Diode VR PD IFP VL IL ILP PD Viso PT TA TSTG PARAMETERS RATINGS UNITS mA V mW A V mA mA mW Vrms mW °C °C Forward Current (DC) 50 Reverse Voltage 5.0 Power Dissipation 50 Peak Forward Current2 1 Break Down Voltage 40 Continuous Load Current 250 Pulse Load Current3 500 Power Dissipation 100 Isolation Voltage4 500 Total Power Dissipation 150 Operating Ambient Temp. -40 to +85 Storage Temperature -40 to +100 RECOMMENDED MOUNT PAD DIMENSIONS (Units in mm) (0.35) 0.8 0.6 MOS FET 3.6 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. PW = 100 μs, Duty Cycle = 1 % 3. PW = 100 ms, 1 shot 4. AC voltage for 1 minute at TA = 25ºC, RH = 60% between input and output 24-R0.1 ORDERING INFORMATION PART NUMBER PS7802-1A-F3 PS7802-1A-F4 PACKAGE 4-PIN SSOP PACKING STYLE Embossed Tape 3 500 pcs RECOMMENDED OPERATING CONDITIONS (TA = 25°C) SYMBOL IF VF PARAMETER LED Operating Current LED Off Voltage UNITS IF VF MIN 2 0 TYP 5 MAX 20 0.5 OUTLINE DIMENSIONS (Units in mm) 2.5±0.3 4 3 0.2 MAX. TOP VIEW 4 3 1. LED Anode 2. LED Cathode 3. MOS FET 4. MOS FET 1 2 4.2 ±0.2 N 0.2 ±0.1 1 2 4.8 MAX 1.85±0.05 +0.1 -0.05 0.4±0.1 1.27 0.15 0.2±0.1 0.36 3.6 +0.3 -0.4 4.4 5.3 PS7802-1A TYPICAL CHARACTERISTICS (TA = 25ºC) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 100 300 MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE Maximum Forward Current, IF (mA) Maximum Load Current, IL (mA) 80 250 200 60 150 40 100 20 50 0 -25 0 25 50 75 85 100 0 -25 0 25 50 75 85 100 Ambient Temperature, TA (ºC) Ambient Temperature, TA (ºC) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE 1.6 25 OUTPUT CAPACITANCE vs. APPLIED VOLTAGE f = 1 MHz Output Capacitance, Cout (pF) Forward Voltage, VF (mA) 20 1.4 IF = 50 mA 1.2 30 mA 20 mA 10 mA 5 mA 1 mA 15 10 1.0 5 0.8 -25 0 25 50 75 100 0 10 20 30 40 50 60 Ambient Temperature, TA (ºC) Applied Voltage, VD (V) OFF-STATE LEAKAGE CURRENT vs. AMBIENT TEMPERATURE 10 -7 LOAD CURRENT vs. LOAD VOLTAGE IF = 5 mA Off-state Leakage, Current IF (mA) VD = 40 V 10 -8 200 Load Current, IL (mA) 10 -9 100 10 -10 -1.0 -0.5 0 -100 0.5 1.0 10 -11 10 -12 -200 10 -13 0 20 40 60 80 100 Ambient Temperature, TA (ºC) Load Voltage, VL (V) 2-92 PS7802-1A TYPICAL CHARACTERISTICS (TA = 25ºC) NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE Normalized On-state Resistance, Ron (mA) 3.0 Normalized to 1.0 at TA = 25ºC, IF = 5 mA IL = 250 mA ON-STATE RESISTANCE DISTRIBUTION 60 2.5 Maximum Load Current, IL (mA) 50 n = 50 pcs, IF = 5 mA IL = 250 mA 2.0 40 1.5 30 1.0 20 0.5 0.0 -25 10 0 25 50 75 100 0 0.5 1.0 1.5 1.10 1.15 Ambient Temperature, TA (ºC) On-state Resistance, Ron (Ω) TURN-ON TIME vs. FORWARD CURRENT 0.10 VO = 5 V, RL = 500 Ω TURN-ON TIME vs. FORWARD CURRENT 0.5 VO = 5 V, RL = 500 Ω 0.4 Turn-on Time, ton (ms) Turn-off Time, toff (ms) 0.08 0.06 0.3 0.04 0.2 0.02 0.1 0 5 10 15 20 25 30 0 5 10 15 20 25 30 Forward Current, IF (mA) Forward Current, IF (mA) TURN-ON TIME DISTRIBUTION 30 n = 50 pcs, IF = 5 mA VO = 5 V, RL = 500 Ω 30 TURN-OFF TIME DISTRIBUTION n = 50 pcs, IF = 5 mA VO = 5 V, RL = 500 Ω 25 25 Number (pcs) 15 Number (pcs) 20 20 15 10 10 5 5 0 0.05 0.075 0.100 0.125 0.150 0 0.06 0.07 0.08 0.09 0.10 Turn-on Time, Ton (ms) Turn-off Time, toff (ms) 2-93 PS7802-1A TYPICAL CHARACTERISTICS (TA = 25ºC) NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE 3.0 Normalized to 1.0 at TA = 25ºC, IF = 5 mA, VO = 5V, RL = 500 Ω 3.0 NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE Normalized to 1.0 at TA = 25ºC, IF = 5 mA, VO = 5V, RL = 500 Ω Normalized Turn-on Time, ton 2.5 Normalized Turn-off Time, toff 2.5 2.0 2.0 1.5 1.5 1.0 1.0 0.5 0.5 0.0 -25 0 25 50 75 100 0.0 -25 0 25 50 75 100 Ambient Temperature, TA (ºC) Ambient Temperature, TA (ºC) ERT (Equivalent Rate Time) measurement Input 250 mV 90% 10% tr (in) ERT = tr (out)2 – tr (in)2 Output 250 mV 90% 10% tr (out) 2-94 PS7802-1A TAPING SPECIFICATIONS (Units in mm) Outline and Dimensions (Tape) 2.0±0.05 4.0±0.1 1.5 +0.1 -0 1.75±0.1 2.9 MAX 5.5±0.05 12.0±0.2 5.3±0.1 0.3 1.55±0.05 4.0±0.1 2.9±0.1 2.4±0.1 Tape Direction PS7802-1-F3 PS7802-1-F4 N N N N Outline and Dimensions (Reel) 2.0±0.5 ∅330±2.0 ∅100±1.0 2.0±0.5 ∅13.0±0.2 R 1.0 ∅21.0±0.8 ∅13.0±0.2 13.5±1.0 17.5±1.0 Packing: 3 500 pcs/reel 11.9 to 15.4 Outer edge of flange 2-95 N N N N N PS7802-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature 260 ûC (package surface temperature) • Time of Peak reflow temperature 10 seconds or less • Time of temperature higher than 220 ˚C 60 seconds or less • Time to preheat temperature from 120 to 180 ˚C 120±30 s • Number of reflows Three • Flux Rosin ßux containing small amount of chlorine (The ßux with a max. chlorine content of 0.2 Wt % is recommended) Recommended Temperature Profile of Infrared Reflow Package Surface Temperatire T (ºC) (heating) t0 10 s 260 ºC MAX. 220 ºC to 60 s 180 ºC 120 ºC 120±30 s (preheating) (2) Wave soldering • Temperature 260 ûC or below (molten solder temperature) • Time 10 seconds or less • Preheating conditions 120ûC or below (package surface temperature) • Number of times One Time (s) • Flux Rosin ßux containing small amount of chlorine (The ßux with a max. chlorine content of 0.2 Wt % is recommended.) (3) Cautions • Fluxes Avoid removing the residual ßux with freon-based and chlorine-based cleaning solvent. Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. 03/16/2004 A Business Partner of NEC Compound Semiconductor Devices, Ltd.