PS9552L2-V

DATA SHEET PHOTOCOUPLER PS9552,PS9552L1,PS9552L2,PS9552L3 2.5 A OUTPUT CURRENT, HIGH CMR IGBT GATE DRIVE PHOTOCOUPLER 8-PIN DIP PHOTOCOUPLER DESCRIPTION The PS9552, PS9552L1, PS9552L2 and PS9552L3 are optically coupled isolators containing a GaAlAs LED on the input side and a photo diode, a signal processing circuit and a power output transistor on the output side on one chip. The PS9552 Series is designed specifically for high common mode transient immunity (CMR), high output current and high switching speed. The PS9552 Series is suitable for driving IGBTs and MOS FETs. The PS9552 Series is in a plastic DIP (Dual In-line Package). The PS9552L1 is lead bending type for long creepage distance. The PS9552L2 is lead bending type for long creepage distance (Gull-wing) for surface mount. The PS9552L3 is lead bending type (Gull-wing) for surface mounting. −NEPOC Series− FEATURES • Long creepage distance (8 mm MIN.: PS9552L1, PS9552L2) • Large peak output current (2.5 A MAX., 2.0 A MIN.) • High speed switching (tPLH, tPHL = 0.5 μs MAX.) • UVLO (Under Voltage Lock Out) protection with hysteresis • High common mode transient immunity (CMH, CML = ±25 kV/μs MIN.) • Ordering number of tape product: PS9552L2-E3: 1 000 pcs/reel : PS9552L3-E3: 1 000 pcs/reel • Safety standards • UL approved: No. E72422 • CSA approved: No. CA 101391 • BSI approved: No. 8937, 8938 • SEMKO approved: No. 615433 • NEMKO approved: No. P06207243 • DEMKO approved: No. 314091 • FIMKO approved: No. FI 22827 • DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40019182 (Option) 1 2 3 4 SHIELD PIN CONNECTION (Top View) 8 7 6 5 1. NC 2. Anode 3. Cathode 4. NC 5. VEE 6. VO 7. VO 8. VCC APPLICATIONS • IGBT, Power MOS FET Gate Driver • Industrial inverter • IH (Induction Heating) The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. PN10589EJ06V0DS (6th edition) Date Published October 2008 NS Printed in Japan The mark shows major revised points. 2006, 2008 The revised points can be easily searched by copying an "" in the PDF file and specifying it in the "Find what:" field. PS9552,PS9552L1,PS9552L2,PS9552L3 PACKAGE DIMENSIONS (UNIT: mm) DIP Type PS9552 9.25–0.25 8 5 +0.5 1 1.01 +0.4 –0.2 4 7.62 6.5–0.1 +0.5 3.5±0.2 0.5±0.15 2.54 0 to 15˚ Lead Bending Type (Gull-wing) For Surface Mount 9.25–0.25 8 5 +0.5 PS9552L3 1 4 9.65±0.4 3.5±0.2 0.5±0.15 2.54 0.74±0.25 2 Data Sheet PN10589EJ06V0DS 0.635±0.15 1.01 +0.4 –0.2 6.5–0.1 +0.5 PS9552,PS9552L1,PS9552L2,PS9552L3 Lead Bending Type For Long Creepage Distance PS9552L1 9.25–0.25 8 5 +0.5 1 1.01 +0.4 –0.2 4 10.16 6.5–0.1 +0.5 3.5±0.2 0.5±0.15 2.54 0 to 15˚ Lead Bending Type (Gull-wing) For Long Creepage Distance (Surface Mount) PS9552L2 9.25–0.25 8 5 +0.5 1 1.01 +0.4 –0.2 4 11.8±0.4 6.5–0.1 +0.5 3.5±0.2 0.5±0.15 2.54 0.9±0.25 0.25±0.2 Data Sheet PN10589EJ06V0DS 3 PS9552,PS9552L1,PS9552L2,PS9552L3 FUNCTIONAL DIAGRAM 8 (Tr. 1) 2 7 (Tr. 2) 3 6 5 SHIELD Input H L LED ON OFF Tr. 1 ON OFF Tr. 2 OFF ON Output H L MARKING EXAMPLE No. 1 pin Mark 9552 NT831 Type Number Assembly Lot N T 8 31 Week Assembled Year Assembled (Last 1 Digit) In-house Code Rank Code PHOTOCOUPLER CONSTRUCTION Parameter Air Distance (MIN.) Outer Creepage Distance (MIN.) Isolation Distance (MIN.) PS9552, PS9552L3 7 mm 7 mm 0.4 mm PS9552L1, PS9552L2 8 mm 8 mm 0.4 mm 4 Data Sheet PN10589EJ06V0DS PS9552,PS9552L1,PS9552L2,PS9552L3 ORDERING INFORMATION Part Number Order Number Solder Plating Specification PS9552 PS9552L1 PS9552L2 PS9552L3 PS9552L2-E3 PS9552L3-E3 PS9552-V PS9552L1-V PS9552L2-V PS9552L3-V PS9552L2-V-E3 PS9552L3-V-E3 PS9552-AX PS9552L1-AX PS9552L2-AX PS9552L3-AX PS9552L2-E3-AX PS9552L3-E3-AX PS9552-V-AX PS9552L1-V-AX PS9552L2-V-AX PS9552L3-V-AX PS9552L2-V-E3-AX PS9552L3-V-E3-AX Embossed Tape 1 000 pcs/reel Magazine case 50 pcs DIN EN60747-5-2 (VDE0884 Part2) Approved (Option) Embossed Tape 1 000 pcs/reel Pb-Free (Ni/Pd/Au) Magazine case 50 pcs Packing Style Safety Standard Approval Standard products (UL, CSA, BSI, SEMKO, NEMKO, DEMKO, FIMKO approved) Application Part Number* PS9552 PS9552L1 PS9552L2 PS9552L3 PS9552L2 PS9552L3 PS9552 PS9552L1 PS9552L2 PS9552L3 PS9552L2 PS9552L3 1 *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10589EJ06V0DS 5 PS9552,PS9552L1,PS9552L2,PS9552L3 ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Parameter Diode Forward Current Peak Transient Forward Current (Pulse Width < 1 μs) Reverse Voltage Detector Symbol IF IF (TRAN) Ratings 25 1.0 Unit mA A VR IOH (PEAK) 5 2.5 V A High Level Peak Output Current *1 Low Level Peak Output Current *1 IOL (PEAK) 2.5 A Supply Voltage Output Voltage Power Dissipation Isolation Voltage *3 *2 (VCC - VEE) VO PC BV 0 to 35 0 to VCC 250 5 000 300 50 −40 to +100 −55 to +125 V V mW Vr.m.s. mW kHz °C °C Total Power Dissipation Operating Frequency *5 *4 PT f TA Tstg Operating Ambient Temperature Storage Temperature *1 Maximum pulse width = 10 μs, Maximum duty cycle = 0.2% *2 Reduced to 4.8 mW/°C at TA = 70°C or more. *3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output. Pins 1-4 shorted together, 5-8 shorted together. *4 Reduced to 5.4 mW/°C at TA = 70°C or more. *5 IOH (PEAK) ≤ 2.0 A (≤ 0.3 μs), IOL (PEAK) ≤ 2.0 A (≤ 0.3 μs) RECOMMENDED OPERATING CONDITIONS Parameter Supply Voltage Forward Current (ON) Forward Voltage (OFF) Operating Ambient Temperature Symbol (VCC - VEE) IF (ON) VF (OFF) TA MIN. 15 7 −2 −40 10 TYP. MAX. 30 16 0.8 100 Unit V mA V °C 6 Data Sheet PN10589EJ06V0DS PS9552,PS9552L1,PS9552L2,PS9552L3 ELECTRICAL CHARACTERISTICS (TA = −40 to +100°C, VCC = 15 to 30 V, IF (ON) = 7 to 16 mA, VF (OFF) = −2 to 0.8 V, VEE = GND, unless otherwise specified) Parameter Diode Forward Voltage Input Capacitance Detector High Level Output Current Symbol VF CIN IOH Conditions IF = 10 mA, TA = 25°C f = 1 MHz, VF = 0 V, TA = 25°C VO = (VCC − 4 V) *2 MIN. 1.3 TYP. *1 MAX. 2.1 Unit V pF A 1.65 60 0.5 *3 2.0 VO = (VCC − 15 V) Low Level Output Current IOL 2.0 0.5 2.0 VCC − 3.5 VCC − 2.5 VCC − 1.5 0.1 2.0 2.0 11.0 9.5 12.3 10.7 1.6 2.0 5.0 0.5 5.0 5.0 13.5 12.0 V mA V V mA mA V 2.0 A VO = (VEE + 2.5 V) VO = (VEE + 15 V) *2 *3 High Level Output Voltage Low Level Output Voltage High Level Supply Current Low Level Supply Current UVLO Threshold VOH VOL ICCH ICCL VUVLO+ VUVLO− IO = −100 mA IO = 100 mA *4 VO = open, IF = 7 to 16 mA VO = open, VF = −2 to +0.8 V VO > 5 V, IF = 10 mA UVLO Hysteresis Coupled Threshold Input Current (L → H) Threshold Input Voltage (H → L) UVLOHYS VO > 5 V, IF = 10 mA IFLH IO = 0 mA, VO > 5 V VFHL IO = 0 mA, VO < 5 V 0.8 V *1 Typical values at TA = 25°C. *2 Maximum pulse width = 50 μs, Maximum duty cycle = 0.5%. *3 Maximum pulse width = 10 μs, Maximum duty cycle = 0.2% *4 VOH is measured with the DC load current in this testing (Maximum pulse width = 2 ms, Maximum duty cycle = 20%). Data Sheet PN10589EJ06V0DS 7 PS9552,PS9552L1,PS9552L2,PS9552L3 SWITCHING CHARACTERISTICS (TA = −40 to +100°C, VCC = 15 to 30 V, IF (ON) = 7 to 16 mA, VF (OFF) = −2 to 0.8 V, VEE = GND, unless otherwise specified) Parameter Propagation Delay Time (L → H) Propagation Delay Time (H → L) Pulse Width Distortion (PWD) Propagation Delay Time (Difference Between Any Two Products) Rise Time Fall Time UVLO (Turn On Delay) UVLO (Turn Off Delay) Common Mode Transient Immunity at High Level Output *3 Symbol tPLH tPHL |tPHL−tPLH| tPHL−tPLH Conditions Rg = 10 Ω, Cg = 10 nF, f = 10 kHz, Duty Cycle = 50% , IF = 7 to 16 mA *2 MIN. 0.1 0.1 TYP. 0.3 0.3 *1 MAX. 0.5 0.5 0.3 Unit μs μs μs μs μs μs μs μs kV/μs kV/μs −0.35 0.35 tr tf tUVLO ON VO > 5 V, IF = 10 mA 0.1 0.1 0.8 0.6 25 tUVLO OFF VO < 5 V, IF = 10 mA |CMH| TA = 25°C, IF = 10 to 16 mA, VCC = 30 V, VO (MIN.) = 26 V, VCM = 1.5k V |CML| TA = 25°C, IF = 0 mA, VCC = 30 V, VO (MAX.) = 1 V, VCM = 1.5k V 25 Common Mode Transient Immunity at Low Level Output *3 *1 Typical values at TA = 25°C. *2 This load condition is equivalent to the IGBT load at 1 200 V/75 A. *3 Connect pin 1 and pin 4 to the LED common. 8 Data Sheet PN10589EJ06V0DS PS9552,PS9552L1,PS9552L2,PS9552L3 TEST CIRCUIT Fig. 1 IOH Test Circuit Fig. 2 IOL Test Circuit 1 2 3 IF = 7 to 16 mA 4 SHIELD 8 7 0.1 μF 6 5 IOH VCC = 15 to 30 V 4V 1 2 3 4 SHIELD 8 7 0.1 μF 6 5 IOL VCC = 15 to 30 V 2.5 V Fig. 3 VOH Test Circuit Fig. 4 VOL Test Circuit 1 2 IF = 7 to 16 mA 3 4 SHIELD 8 7 0.1 μF 6 5 100 mA VOH VCC = 15 to 30 V 1 2 3 4 SHIELD 8 7 6 5 0.1 μF VCC = 15 to 30 V VOL 100 mA Fig. 5 IFLH Test Circuit Fig. 6 UVLO Test Circuit 1 2 IF 3 4 SHIELD 8 7 6 5 0.1 μF VO > 5 V VCC = 15 to 30 V 1 IF = 10 mA 2 3 4 SHIELD 8 7 6 5 0.1 μF VCC VO > 5 V Data Sheet PN10589EJ06V0DS 9 PS9552,PS9552L1,PS9552L2,PS9552L3 Fig. 7 tPLH, tPHL, tr, tf Test Circuit and Wave Forms 1 2 IF = 7 to 16 mA 500 Ω 3 10 kHz 50% DUTY 4 CYCLE SHIELD 8 7 6 5 0.1 μF VO 10 Ω 10 nF IF VCC = 15 to 30 V tr tf 90% 50% 10% tPLH tPHL VOUT Fig. 8 CMR Test Circuit and Wave Forms 1 IF A B 2 3 4 SHIELD 8 7 6 5 0.1 μF VO VCC = 30 V VCM VCM δV = Δt δt 0V VO (Switch A: IF = 10 to 16 mA) VO (Switch B: IF = 0 mA) Δt VOH 26 V 1V VOL VCM = 1.5 kV Remark CMR Test : Connect pin 1 and pin 4 to the LED common. 10 Data Sheet PN10589EJ06V0DS PS9552,PS9552L1,PS9552L2,PS9552L3 TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 30 Detector Power Dissipation PC (mW) Maximum Forward Current IF (mA) 25 20 15 10 5 300 250 200 150 100 50 DETECTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 0 20 40 60 80 100 120 0 20 40 60 80 100 120 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) TOTAL POWER DISSIPATION vs. AMBIENT TEMPERATURE 350 Total Power Dissipation PT (mW) 300 Forward Current IF (mA) 250 200 150 100 50 0 20 40 60 80 100 120 0.01 1.0 10 100 FORWARD CURRENT vs. FORWARD VOLTAGE 1 0.1 TA = +100˚C +85˚C +50˚C +25˚C 0˚C –20˚C –40˚C 1.2 1.4 1.6 1.8 2.0 2.2 2.4 Ambient Temperature TA (˚C) Forward Voltage VF (V) THRESHOLD INPUT CURRENT vs. AMBIENT TEMPERATURE 5.0 Threshold Input Current IFHL (mA) VCC = 30 V, VEE = GND, VO > 5 V Output Voltage VO (V) 35 30 25 20 15 10 5 0 –40 –20 0 20 40 60 80 100 0 OUTPUT VOLTAGE vs. FORWARD CURRENT 4.0 3.0 2.0 1.0 1 2 3 4 5 Ambient Temperature TA (˚C) Forward Current IF (mA) Remark The graphs indicate nominal characteristics. Data Sheet PN10589EJ06V0DS 11 PS9552,PS9552L1,PS9552L2,PS9552L3 HIGH LEVEL OUTPUT VOLTAGE – SUPPLY VOLTAGE vs. HIGH LEVEL OUTPUT CURRENT –1 LOW LEVEL OUTPUT VOLTAGE vs. LOW LEVEL OUTPUT CURRENT 4 High Level Output Voltage – Supply Voltage VOH – VCC (V) –2 Low Level Output Voltage VOL (V) VCC = 30 V, VEE = GND, IF = 10 mA VCC = 30 V, VEE = GND, IF = 0 mA 3 –3 2 –4 –5 1 –6 0 0.5 1 1.5 2 2.5 0 0.5 1 1.5 2 2.5 High Level Output Current IOH (A) Low Level Output Current IOL (A) PROPAGATION DELAY TIME, PULSE WIDTH DISTORTION vs. FORWARD CURRENT Propagation Delay Time tPHL, tPLH (ns), Pulse Width Distortion (PWD) tPHL – tPLH (ns) Propagation Delay Time tPHL, tPLH (ns), Pulse Width Distortion (PWD) tPHL – tPLH (ns) 500 VCC = 30 V, VEE = GND, Rg = 10 Ω, Cg = 10 nF, f = 10 kHz, Duty cycle = 50% 500 PROPAGATION DELAY TIME, PULSE WIDTH DISTORTION vs. SUPPLY VOLTAGE VEE = GND, IF = 10 mA, Rg = 10 Ω, Cg = 10 nF, f = 10 kHz, Duty cycle = 50% 400 400 300 tPLH tPHL 300 tPLH tPHL 200 200 100 PWD 0 6 8 10 12 14 16 18 100 PWD 0 15 20 25 30 Forward Current IF (mA) Supply Voltage VCC (V) Propagation Delay Time tPHL, tPLH (ns), Pulse Width Distortion (PWD) tPHL – tPLH (ns) Propagation Delay Time tPHL, tPLH (ns), Pulse Width Distortion (PWD) tPHL – tPLH (ns) PROPAGATION DELAY TIME, PULSE WIDTH DISTORTION vs. AMBIENT TEMPERATURE 500 VCC = 30 V, VEE = GND, IF = 10 mA, Rg = 10 Ω, Cg = 10 nF, f = 10 kHz, Duty cycle = 50% tPLH tPHL 200 PROPAGATION DELAY TIME, PULSE WIDTH DISTORTION vs. LOAD CAPACITANCE 500 VCC = 30 V, VEE = GND, IF = 10 mA, Rg = 10 Ω, f = 10 kHz, Duty cycle = 50% 400 400 300 300 tPLH tPHL 200 100 PWD 0 –40 –20 0 20 40 60 80 100 100 PWD 0 20 40 60 80 100 120 Ambient Temperature TA (˚C) Load Capacitance Cg (nF) Remark The graphs indicate nominal characteristics. 12 Data Sheet PN10589EJ06V0DS PS9552,PS9552L1,PS9552L2,PS9552L3 SUPPLY CURRENT vs. AMBIENT TEMPERATURE 3.5 High Level Supply Current ICCH (mA), Low Level Supply Current ICCL (mA) SUPPLY CURRENT vs. AMBIENT TEMPERATURE 3.5 High Level Supply Current ICCH (mA), Low Level Supply Current ICCL (mA) 3 VCC = 30 V, VEE = GND, VO = OPEN VEE = GND, VO = OPEN 3 2.5 ICCH (IF = 10 mA) 2.5 ICCH (IF = 10 mA) ICCL (IF = 0 mA) 2 ICCL (IF = 0 mA) 2 1.5 –40 –20 0 20 40 60 80 100 1.5 15 20 25 30 Ambient Temperature TA (˚C) Supply Voltage VCC (V) HIGH LEVEL OUTPUT VOLTAGE – SUPPLY VOLTAGE vs. AMBIENT TEMPERATURE 0 High Level Output Voltage – Supply Voltage VOH – VCC (V) Low Level Output Voltage VOL (V) LOW LEVEL OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE 0.25 VCC = 30 V, VEE = GND, IF = 0 mA, IO = 100 mA VCC = 30 V, VEE = GND, IF = 10 mA, IO = –100 mA –1 0.20 0.15 –2 0.10 –3 0.05 –4 –40 –20 0 20 40 60 80 100 0 –40 –20 0 20 40 60 80 100 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) HIGH LEVEL OUTPUT CURRENT vs. AMBIENT TEMPERATURE 3 High Level Output Current IOH (A) Low Level Output Current IOL (A) LOW LEVEL OUTPUT CURRENT vs. AMBIENT TEMPERATURE 4 VCC = 30 V, VEE = GND, IF = 0 mA, VO = 2.5 V VCC = 30 V, VEE = GND, IF = 10 mA, VCC–VO = 4 V 2.5 3 2 2 1.5 1 1 –40 –20 0 20 40 60 80 100 0 –40 –20 0 20 40 60 80 100 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) Remark The graphs indicate nominal characteristics. Data Sheet PN10589EJ06V0DS 13 PS9552,PS9552L1,PS9552L2,PS9552L3 PROPAGATION DELAY TIME, PULSE WIDTH DISTORTION vs. LOAD RESISTANCE Propagation Delay Time tPHL, tPLH (ns), Pulse Width Distortion (PWD) tPHL – tPLH (ns) OUTPUT VOLTAGE vs. SUPPLY VOLTAGE 14 12 Output Voltage VO (V) 500 400 VCC = 30 V, VEE = GND, IF = 10 mA, Cg = 10 nF, f = 10 kHz, Duty cycle = 50% 10 8 UVLOHYS 6 4 2 VUVLO– (10.7 V) VUVLO+ (12.3 V) 300 tPLH tPHL 200 100 PWD 0 0 10 20 30 40 50 60 0 5 10 15 20 Load Resistance Rg (Ω) Supply Voltage VCC – VEE (V) Remark The graphs indicate nominal characteristics. 14 Data Sheet PN10589EJ06V0DS PS9552,PS9552L1,PS9552L2,PS9552L3 TAPING SPECIFICATIONS (UNIT: mm) Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.75±0.1 1.5 +0.1 –0 4.5 MAX. 11.5±0.1 24.0±0.3 12.8±0.1 2.05±0.05 12.0±0.1 10.7±0.1 4.1±0.1 0.3±0.05 Tape Direction PS9552L2-E3 Outline and Dimensions (Reel) 2.0±0.5 330±2.0 2.0±0.5 13.0±0.2 R 1.0 21.0±0.8 25.5±1.0 29.5±1.0 100±1.0 Packing: 1 000 pcs/reel 23.9 to 27.4 Outer edge of flange Data Sheet PN10589EJ06V0DS 15 PS9552,PS9552L1,PS9552L2,PS9552L3 Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.5 +0.1 –0 1.75±0.1 5.3 MAX. 16.0±0.3 7.5±0.1 10.4±0.1 1.55±0.1 12.0±0.1 10.3±0.1 4.75±0.1 0.35±0.05 Tape Direction PS9552L3-E3 Outline and Dimensions (Reel) 2.0±0.5 2.0±0.5 13.0±0.2 330±2.0 21.0±0.8 100±1.0 R 1.0 17.5±1.0 21.5±1.0 Packing: 1 000 pcs/reel 15.9 to 19.4 Outer edge of flange 16 Data Sheet PN10589EJ06V0DS PS9552,PS9552L1,PS9552L2,PS9552L3 RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm) D A Part Number PS9552L2 PS9552L3 Lead Bending lead bending type (Gull-wing) for long creepage distance (surface mount) lead bending type (Gull-wing) for surface mount A 10.2 8.2 B 2.54 2.54 B C 1.7 1.7 C D 2.2 2.2 Data Sheet PN10589EJ06V0DS 17 PS9552,PS9552L1,PS9552L2,PS9552L3 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature • Time of peak reflow temperature • Time of temperature higher than 220°C • Time to preheat temperature from 120 to 180°C • Number of reflows • Flux 260°C or below (package surface temperature) 10 seconds or less 60 seconds or less 120±30 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (˚C) (heating) to 10 s 260˚C MAX. 220˚C to 60 s 180˚C 120˚C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature • Time • Preheating conditions • Number of times • Flux 260°C or below (molten solder temperature) 10 seconds or less 120°C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by Soldering Iron • Peak Temperature (lead part temperature) • Time (each pins) • Flux 350°C or below 3 seconds or less Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (b) Please be sure that the temperature of the package would not be heated over 100°C 18 Data Sheet PN10589EJ06V0DS PS9552,PS9552L1,PS9552L2,PS9552L3 (4) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. USAGE CAUTIONS 1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. Board designing (1) By-pass capacitor of more than 0.1 μF is used between VCC and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. (2) In older to avoid malfunctions and characteristics degradation, IGBT collector or emitter traces should not be closed to the LED input. 3. Make sure the rise/fall time of the forward current is 0.5 μs or less. 4. In order to avoid malfunctions, make sure the rise/fall slope of the supply voltage is 3 V/μs or less. 5. Avoid storage at a high temperature and high humidity. Data Sheet PN10589EJ06V0DS 19 PS9552,PS9552L1,PS9552L2,PS9552L3 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Application classification (DIN EN 60664-1 VDE0110 Part 1) for rated line voltages ≤ 300 Vr.m.s. for rated line voltages ≤ 600 Vr.m.s. Climatic test class (DIN EN 60664-1 VDE0110) Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) Upr = 1.5 × UIORM, Pd < 5 pC Test voltage (partial discharge test, procedure b for all devices) Upr = 1.875 × UIORM, Pd < 5 pC Highest permissible overvoltage Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) Clearance distance PS9552, PS9552L3 PS9552L1, PS9552L2 Creepage distance PS9552, PS9552L3 PS9552L1, PS9552L2 Comparative tracking index (DIN IEC 112/VDE 0303 Part 1) Material group (DIN EN 60664-1 VDE0110 Part 1) Storage temperature range Operating temperature range Isolation resistance, minimum value VIO = 500 V dc at TA = 25°C VIO = 500 V dc at TA MAX. at least 100°C Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current IF, Psi = 0) Power (output or total power dissipation) Isolation resistance VIO = 500 V dc at TA = Tsi Ris MIN. 10 9 Symbol Spec. Unit IV III 55/100/21 UIORM Upr 1 130 1 695 Vpeak Vpeak Upr 2 119 Vpeak UTR 8 000 2 >7.0 >8.0 >7.0 >8.0 Vpeak mm mm CTI 175 III a Tstg TA –55 to +125 –40 to +100 °C °C Ω Ω Ris MIN. Ris MIN. 10 10 12 11 Tsi Isi Psi 175 400 700 °C mA mW Ω 20 Data Sheet PN10589EJ06V0DS PS9552,PS9552L1,PS9552L2,PS9552L3 • T he information in this document is current as of October, 2008. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. • No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. • NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. • Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. • While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. • NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1 Data Sheet PN10589EJ06V0DS 21 PS9552,PS9552L1,PS9552L2,PS9552L3 Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. • Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. • Do not burn, destroy, cut, crush, or chemically dissolve the product. • Do not lick the product or in any way allow it to enter the mouth.