RD36UJ

DATA SHEET ZENER DIODES RD4.7UJ to RD39UJ LOW NOISE SHARP BREAKDOWN CHARACTERISTICS ZENER DIODES 2PIN ULTRA SUPER MINI MOLD DESCRIPTION Type RD4.7UJ to RD39UJ Series are 2PIN Ultra Super Mini Mold Package zener diodes possessing an allowable power dissipation of 150 mW featuring low noise and sharp breakdown characteristic. They are intended for use in audio equip0.3±0.05 0.8±0.1 0.15 0.11+0.05 –0.01 0±0.05 PACKAGE DIMENSIONS (Unit: mm) ment, instrument equipment. 2.1±0.1 1.3±0.1 FEATURES • Low Noise • Sharp Breakdown characteristics • Vz; Applied E24 standard APPLICATIONS Circuits for Constant Voltage, Constant Current, Waveform clipper, Surge absorber, etc. Cathode Indication MAXIMUM RATINGS (TA = 25 °C) Power Dissipation Forward Current Reverse Surge Power P IF PRSM 150 mW 100 mA 2.2 W (at t = 10 µs/1 pulse) Show Fig. 6 Junction Temperature Storage Temperature Tj Tstg 150 °C –55 to +150 °C The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. Document No. D13938EJ3V0DS00 (3rd edition) (Previous No. DC-2135) Date Published March 1999 N CP(K) Printed in Japan © 0.7±0.1 1993 RD4.7UJ to RD39UJ ELECTRICAL CHARACTERISTICS (TA = 25 ± 2 °C) Zener Voltage Type Number Class MIN. N RD4.7UJ N1 N2 N3 N RD5.1UJ N1 N2 N3 N RD5.6UJ N1 N2 N3 N RD6.2UJ N1 N2 N3 N RD6.8UJ N1 N2 N3 N RD7.5UJ N1 N2 N3 N RD8.2UJ N1 N2 N3 N RD9.1UJ N1 N2 N3 N RD10UJ N1 N2 N3 N RD11UJ N1 N2 N3 N RD12UJ N1 N2 N3 N RD13UJ N1 N2 N3 4.39 4.39 4.52 4.66 4.81 4.81 4.95 5.10 5.26 5.26 5.44 5.63 5.81 5.81 6.01 6.21 6.41 6.41 6.60 6.80 7.00 7.00 7.21 7.46 7.69 7.69 7.94 8.20 8.47 8.47 8.76 9.06 9.35 9.35 9.66 10.00 10.32 10.32 10.64 10.97 11.28 11.28 11.59 11.93 12.29 12.29 12.72 13.17 Vz (V)Note 1 MAX. 4.91 4.62 4.76 4.91 5.36 5.05 5.20 5.36 5.91 5.54 5.73 5.91 6.53 6.11 6.32 6.53 7.14 6.74 6.94 7.14 7.83 7.35 7.60 7.83 8.61 8.08 8.34 8.61 9.51 8.91 9.21 9.51 10.51 9.82 10.16 10.51 11.50 10.84 11.17 11.50 12.52 11.83 12.17 12.52 13.86 12.95 13.40 13.86 Data Sheet D13938EJ3V0DS00 Dynamic Impedance Zz (Ω)Note 2 MAX. Iz (mA) Reverse Current IR (µA) MAX. VR (V) Iz (mA) 0.5 800 0.5 2 1.0 0.5 500 0.5 2 1.5 0.5 200 0.5 1 2.5 0.5 100 0.5 1 3.0 0.5 60 0.5 0.5 3.5 0.5 60 0.5 0.5 4.0 0.5 60 0.5 0.5 5.0 0.5 60 0.5 0.5 6.0 0.5 60 0.5 0.1 7.0 0.5 60 0.5 0.1 8.0 0.5 80 0.5 0.1 9.0 0.5 80 0.5 0.1 10.0 2 RD4.7UJ to RD39UJ Zener Voltage Type Number Class MIN. N RD15UJ N1 N2 N3 N RD16UJ N1 N2 N3 N RD18UJ N1 N2 N3 N RD20UJ N1 N2 N3 N RD22UJ N1 N2 N3 N RD24UJ N1 N2 N3 N RD27UJ N1 N2 N3 N RD30UJ N1 N2 N3 N RD33UJ N1 N2 N3 N RD36UJ N1 N2 N3 N RD39UJ N1 N2 N3 13.63 13.63 14.12 14.62 15.13 15.13 15.58 16.07 16.63 16.63 17.24 17.87 18.51 18.51 19.14 19.80 20.46 20.46 21.09 21.76 22.42 22.42 23.19 23.98 24.75 24.75 25.56 26.46 27.38 27.38 28.35 29.37 30.30 30.30 31.21 32.14 33.08 33.08 33.95 34.87 35.78 35.78 36.63 37.56 Vz (V)Note 1 MAX. 15.38 14.35 14.85 15.38 16.91 15.87 16.36 16.91 18.81 17.52 18.15 18.81 20.79 19.42 20.12 20.79 22.82 21.47 22.15 22.82 25.17 23.59 24.38 25.17 27.95 26.04 26.96 27.95 31.04 29.00 30.04 31.04 33.97 32.02 32.98 33.97 36.83 34.92 36.85 36.83 39.67 37.75 38.69 39.67 0.5 360 0.5 0.1 30 0.5 300 0.5 0.1 27 0.5 250 0.5 0.1 25 0.5 200 0.5 0.1 23 0.5 150 0.5 0.1 21 0.5 120 0.5 0.1 19 0.5 100 0.5 0.1 17 0.5 100 0.5 0.1 15 0.5 80 0.5 0.1 13 0.5 80 0.5 0.1 12 0.5 80 0.5 0.1 11 Iz (mA) Dynamic Impedance Zz (Ω)Note 2 MAX. Iz (mA) Reverse Current IR (µA) MAX. VR (V) Note 1. Tested with pulse (40 ms) 2. Zz is measured at Iz by given a very small A.C. current signal Data Sheet D13938EJ3V0DS00 3 RD4.7UJ to RD39UJ TYPICAL CHARACTERISTICS (TA = 25 °C) Fig. 1 P – TA RATING 200 30×30×0.75 P.C.B. (Ceramic) P - Power Dissipation - mW 150 20×15×0.75 P.C.B. (Ceramic) 10×7.5×0.75 P.C.B. (Glass Epoxy) 100 10×7.5×0.75 P.C.B. (Ceramic) 50 0 50 100 TA - Ambient Temperature - °C 150 200 Fig. 2 Iz – Vz CHARACTERISTICS (a to d) RD9.1UJ RD10UJ RD11UJ RD12UJ RD13UJ RD4.7UJ RD5.1UJ RD5.6UJ RD6.2UJ RD6.8UJ RD7.5UJ 100 m RD8.2UJ 100 m Iz - Zener Current - A 1m Iz - Zener Current - A 10 m 10 m 1m 100 µ 100 µ 10 µ 10 µ 3 4 5 6 7 8 9 9 10 11 12 13 14 Vz - Zener Voltage - V (a) Vz - Zener Voltage - V (b) 4 Data Sheet D13938EJ3V0DS00 RD15UJ 15 RD4.7UJ to RD39UJ RD27UJ RD16UJ RD18UJ RD20UJ RD22UJ RD24UJ RD30UJ RD33UJ RD36UJ 38 40 42 100 m 100 m Iz - Zener Current - A 1m Iz - Zener Current - A 10 m 10 m 1m 100 µ 100 µ 10 µ 10 µ 16 18 20 22 24 26 28 28 30 32 34 36 Vz - Zener Voltage - V (c) Vz - Zener Voltage - V (d) Fig. 3 γ z – Vz CHARACTERISTICS 0.08 0.06 0.04 0.02 0 –0.02 –0.04 4 8 12 %/°C 32 24 mV/°C 16 8 0 –8 –16 16 20 24 28 32 36 40 VZ - Zener Voltage - V γZ -VZ - Temperature Coefficient - mV/°C γZ -VZ - Temperature Coefficient - %/°C RD39UJ 44 Data Sheet D13938EJ3V0DS00 5 RD4.7UJ to RD39UJ Fig. 4 TRANSIENT THERMAL IMPEDANCE CHARACTERISTIC 1000 833 °C/W Zth – Transient Thermal Impedance – °C/W 100 10 1 1m P.C.B. (Glass Epoxy) (30mm×30 mm×1.6mm) 10 m 100 m 1 t – Time – s 10 100 Fig. 5 SURGE REVERSE POWER RATINGS 1000 TA = 25 °C Repetitive PRSM – Surge Reverse Power – W PRSM tT 100 10 1 1µ 10 µ 100µ 1m 10 m 100 m tT – Pulse Width – s 6 Data Sheet D13938EJ3V0DS00 RD4.7UJ to RD39UJ [MEMO] Data Sheet D13938EJ3V0DS00 7 RD4.7UJ to RD39UJ [MEMO] • The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. • No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. • NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. • Descriptions of circuits, software, and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software, and information in the design of the customer's equipment shall be done under the full responsibility of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third parties arising from the use of these circuits, software, and information. • While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. • NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated “quality assurance program“ for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. M7 98.8