UPD703003AGC-33

V850 family Product Letter Description V853 32-bit RISC Microcontrollers The single-chip V853 microcontroller is a member of NEC’s 32-bit RISC V850 family. It integrates CPU, ROM, RAM and peripheral functions on chip. The internal bus is 32 bits wide, the external bus 16 bits wide. Controller memory options are listed in Table 1. Applications Like other V850 series controllers, the V853 device is used for real-time control applications, such as servo motor control in computer peripherals and machine tools, for engine management control, consumer electronics and multimedia. Flash memory, a variety of serial communication channels and AD/DA converters make it the perfect choice for compact communication terminals and complete control systems. Typical benefits of Flash memory are individually programmed devices in the final production process and field upgradability. With their low power consumption and power-saving modes, V853 devices are also ideal for portable applications. Features • Small 32-bit RISC CPU core • 30 ns minimum instruction execution time (33 MHz max. clock) • 16-Mbyte linear address space • 1-Mbyte external address space • 32 general-purpose registers • 74 instructions optimized for embedded control • DSP functionality with 16-bit multiplication and saturation logic in a single clock cycle • • • • • • • • • • Up to 8 Kbytes internal RAM Interrupt controller Real-time pulse unit/timers Serial interface with baud rate generator A/D and D/A converters PWM Clock generator Power save functions Mask ROM, Flash versions 100-pin LQFP package Block Diagram NMI INTP Interrupt Controller ROM Mask 96/128 Kbytes or Flash 128/256 Kbytes CPU Core PC Instruction Queue ASTB DSTB Barrel Shifter Hardware Multiplier 16 x 16 > 32 R/W Bus Control Unit UBEN LBEN WAIT A16-A19 AD0-AD15 HLDRQ HLDAK TI TO TCLR1 Timer/Counter 16-bit timer: 5 channels System Registers SIO SO0/TxD0 SI0/RxD0 SCK0 SO1/TxD1 SI1/RxD1 SCK1 SO2 SI2 SCK2 SO3 SI3 SCK3 UART/CSI BRG UART/CSI BRG CSI BRG CSI AVDD AVREF1 A/D Converter PWM PWM AVSS ADTRG ANI1-ANI7 RAM 4 Kbytes/ 8 Kbytes General Registers A L U Internal Peripheral Bus CKSEL Oscillator and Clock Generator CLKOUT X1 X2 System Control MODE RESET P0-11 ANO Ports D/A Converter AVREF Functional Block Description CPU The internal CPU, based on Harvard architechture, is a very compact 32-bit RISC engine. Most instructions are executed in a single clock cycle under control of a 5-stage pipeline. It also includes a 16 x 16-bit hardware multiplier with 32-bit result and saturation logic. A 32-bit barrel shifter and bit manipulation instructions accelerate complex bit operations. Bus Control Unit (BCU) The BCU initiates the bus cycles based on the physical addresses generated by the CPU. When an instruction stored in external memory is executed and no bus cycle initiation is requested by the CPU, the BCU creates a prefetch address to prefetch an instruction code which is then inserted in the internal instruction queue. RAM The internal RAM, with a capacity of 4 or 8 Kbytes, is mapped from address FFFFE000H. The CPU can access any data in one clock cycle. ROM The internal ROM (96 or 128 Kbytes) or Flash ROM (128 or 256 Kbytes) is mapped from 00000000H. The CPU can access any instruction from the ROM/Flash ROM in one clock cycle. PROM Programming Ports Interrupt Controller The Flash memory can be written and erased electrically. The V853 has 67 input/output port pins that can be used alternatively as control pins. The interrupt controller handles the interrupt request issued by internal peripheral hardware and external sources. Up to 8 interrupt priority levels can be specified for each interrupt request. Clock Generator The clock generator produces the CPU operating clock. The internal frequency can be selected as 5x or 1x of crystal frequency by using the internal PLL or 1/2x crystal frequency without PLL. An external clock can be used instead of the clock generator. A clock-out signal is available. Real-time Pulse Unit (RPU)/Timers Serial Interface The RPU includes a 5-channel 16-bit timer/counter unit. The serial interface includes two channels of CSI (Clocked Serial Interface) and two channels which can be operated in the UART (Asynchronous Serial Interface) or the CSI mode. The UART transfers data via the TxD and RxD pins. The baud rate is determined by the on-chip dedicated baud rate generator. The CSI transfers data via the SO, SI and SCK pins at a baud rate determined by the on-chip dedicated baud rate generator or an external clock. A/D Converter An 8-channel A/D converter with 10-bit resolution and a 2-channel 8-bit D/A converter are integrated. PWM A 2-channel PWM unit with different operating modes is available on chip. V853 32-bit RISC Microcontrollers Ordering Information Devices Part Number µPD703004AGC-25 µPD703004AGC-33 µPD703003AGC-25 µPD703003AGC-33 µPD70F3004AGC-25 µPD70F3004AGC-33 µPD70F30025AGC-25 µPD70F30025AGC-33 µPD7030025AGC-25 µPD7030025AGC-33 Max. freq. (MHz) 25 33 25 33 25 33 25 33 25 33 ROM (Kbytes) 96 96 128 128 256 256 Flash (Kbytes) 128 128 256 256 - RAM (Kbytes) 4 4 4 4 4 4 8 8 8 8 Documentation Doc Number U13919EE2V0CD00 U10243EJ6V0UM00 U10913EJ5V0UM00 U13188EJ2V1DS00 U13189EJ2V0DS00 Devices NEC Micro-Components V850 V853 V853 Mask V853 Flash Type CD-ROM Architecture Manual User’s Manual Data Sheet Data Sheet Tools Order Number V850-IAR-Toolset IE-703003-MC-EM1 CPDW95/NT-CDR-V800 FA100-GC SC100SDN FlashMASTER Devices V850 V853 V850 V850 V850 Description ICE + C Compiler Emulation Board C/C++ Compiler (GHS) Type Hardware & Software Hardware Optional Software Hardware Hardware & Software Hardware 100-pin LQFP Programming Adapter Starter Kit Programmer Emulation Probe Extension Optional Hardware StartWARE-GHS-V850/SA1 V850 For further information on NEC’s V850 family or other NEC products visit our European website at www.nec.de V853 32-bit RISC Microcontrollers NEC Offices NEC Electronics (Europe) GmbH, Oberrather Str. 4, D-40472 Düsseldorf, Tel. (02 11) 65 03 01, Fax (02 11) 65 03-3 27 NEC Electronics (Germany) GmbH, Kanzlerstr. 2, D-40472 Düsseldorf, Tel. (02 11) 65 03 02, Fax (02 11) 65 03-4 90 - Podbielskistr. 164, D-30177 Hannover, Tel. (05 11) 3 34 02-0, Fax (05 11) 3 34 02-34 - Arabellastr. 17, D-81925 München, Tel. (0 89) 92 10 03-0, Fax (0 89) 91 31 82 - Industriestr. 3, D-70565 Stuttgart, Tel. (07 11) 9 90 10-0, Fax (07 11) 9 90 10-19 NEC Electronics (BNL) - Boschdijk 187a, NL-5612 HB Eindhoven, Tel. (0 40) 2 44 58 45, Fax (0 40) 2 44 45 80 NEC Electronics (Scandinavia) - Täby Centrum, Entrance S (7th floor), S-18322 Täby, Tel. (08) 6 38 08 20, Fax (08) 6 38 03 88 NEC Electronics (France) S.A., 9, rue Paul Dautier, B.P. 187, F-78142 Vélizy-Villacoublay Cédex, Tél. (01) 30 67 58 00, Fax (01) 30 67 58 99 NEC Electronics (France) S.A., Representacion en Espana, Juan Esplandiu 15, E-28007 Madrid, Tel. (01) 5 04 27 87, Fax (01) 5 04 28 60 NEC Electronics Italiana S.R.L., Via Fabio Filzi, 25A, I-20124 Milano, Tel. (02) 66 75 41, Fax (02) 66 75 42 99 - Rome Office, Via Monte Cervialto, 131, I-00139 Roma, Tel. (06) 8 86 22 91/2, Fax (06) 8 86 22 39 NEC Electronics (UK) Ltd., Cygnus House, Sunrise Parkway, Milton Keynes, GB-MK14 6NP, Tel. (0 19 08) 69 11 33, Fax (0 19 08) 67 02 90 - Scotland Office, Block 3, Carfin Industrial Estate, Motherwell GB-ML1 4UL, Tel. (0 16 98) 73 22 21, Fax (0 16 98) 83 38 68 © Published by NEC Electronics (Europe) GmbH, Printed in Germany, February 2000 Document No. U12893EE3V0PL00 With compliments NEC makes no warranty with respect to this documentation and disclaims any implied warranties of merchantability or fitness for particular purpose. NEC does not assume any responsibility for circuits shown or claim that they are free from patent infringement. Product specifications are subject to change without notice. To ensure that you have the latest product data, please contact your local NEC sales office. © NEC Electronics (Europe) GmbH