AB-A36DH9E-FREQ

CRYSTAL CLOCK OSCILLATORS Data Sheet 0630B Rev. C PECL/LVPECL UHF VCXO AB-X36DXXX Series Description The AB-X36DXXX Series of voltage controlled crystal oscillators (VCXO) provides ultra high frequency with PECL/LVPECL complementary outputs. The outputs can be disabled for test automation or combining multiple clocks. The device is based on low noise analog harmonic frequency multiplication, providing exceptionally low Phase Noise and Jitter. It is packaged in a miniature, FR-4 based 9x14 mm SMD package. Applications and Features • Wide frequency range – 200.0MHz to 1.000GHz • Fiber Channel; 10 GbE; Infiniband; Network Processors; SONET/SDH • High Reliability - NEL HALT/HASS qualified for crystal oscillator start-up conditions • Extremely Low Phase Noise, Low Jitter • SONET ±20ppm overall free-run stability available • Absolute Pull Range (APR) to ±1000 ppm • High shock resistance, to 1000g • RoHS Compliant, Lead Free Construction Creating a Part Number AB - X 36D X X X - FREQ Package Code Absolute Pull Range, ppm AB 6 pad 9x14mm SMD E ±20 F ±32 Input Voltage G ±50 0 5.0V±5% H ±100 A 3.3V±5% 9 Customer specific Enable Option H Enable High L Enable Low Temperature Range, °C A 0 to 50 B 0 to 70 C -20 to 70 D -40 to 85 9 Customer specific 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: nelsales@nelfc.com www.nelfc.com CRYSTAL CLOCK OSCILLATORS AB-X36DXXX Series Continued PECL/LVPECL UHF VCXO Data Sheet 0630B Rev. C Absolute Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Supply Voltage Enable/Disable Voltage Parameter Nominal Frequency Supply Voltage Supply current Output Logic Type Load Output Levels Symb Fo Vcc Icc Output to Vcc-2V, or Thevenin Equivalent overall Symbol To Tst Vcc Ven/dis Conditions, Note Code Code A Value -40 to +85 -50 to +90 -0.5 to 4.5 0 to Vcc MIN 200 4.75 3.135 TYP 5.0 3.3 60 LVPECL Unit ºC ºC V V MAX 1000 5.25 3.465 80 Unit MHz V mA Ohm V Vcc1.620 55/45 0.7 0.2 1.0 0.3 2.5 25 1 -50 -60 -90 -118 -135 -140 -145 ±30 -46 -55 -85 -113 -130 -135 -140 Electrical Parameters 50 Voh Vol Vcc1.025 45/55 50/50 0.5 0.1 Duty Cycle (Symmetry) Rise/Fall Time Jitter Integrated Tr/Tf J Wavecrest characterized Sub-harmonics Phase Noise At 50% of output voltage swing 20 to 80, 80 to 20 % Integrated from Phase Noise, 12 KHz to 20 MHz, RMS 10 Hz to 80 KHz, RMS 50 Khz to 80 Mhz Random period, Accumul., pkto-pk Deterministic @ 10 Hz @100 Hz @1 KHz @10KHz @100KHz @>1MHz Overall, including initial calibration, temperature, aging 10 years, shock and vibration @ Vc=Vcc/2; APR 50ppm, or less Vc to set F at Fo; T, Vcc, load - nominal, as shipped Over all conditions, see part # creation @ Fmod < 100 Khz At Vc = Vcc/2, -3dB Pin 2 = Low, 0 to Vcc1.62V Pin 2 = High, Vcc-1.025V to Vcc 622.080 MHz, APR 50ppm or less @ 622.08MHz % ns ps ps ps ps ps ps dBc dBc/Hz £(Δf) Frequency Stability, usually not specified unless necessary, APR is specified to incorporate stability Control Voltage Range Setability Absolute Pull Range Input Impedance Modulation Bandwidth Enable Disable ΔF/F ±20 ppm Vc Vcs APR Zin 0V 0.4 Vcc 20,32, 50,100 50 20 0.5 Vcc Vcc 0.6 Vcc V V ppm KOhm KHz Enabled Disabled, Pin 4 = Logic “1", Pin 5 = Logic “0" V V 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: nelsales@nelfc.com www.nelfc.com CRYSTAL CLOCK OSCILLATORS AB-X36DXXX Series Continued PECL/LVPECL UHF VCXO Electrical Connection Pin Connection 1 Vco 2 Enable/Disable 3 VEE 4 Output 5 Output Complement 6 VCC 0 .5 5 ( 1 4 m m ) Rev. C 0 .3 5 ( 9 m m ) 0 .2 4 ( 6 .1 m m ) RECOM M ENDED PAD LAYOUT 0 .0 4 5 ( 1 .1 4 m m ) 1 0 .3 0 0 ( 7 .6 2 m m ) 6 5 4 0 .2 0 0 ( 5 .0 8 m m ) 2 3 0 .0 6 0 ( 1 .5 2 m m ) 0 .1 0 0 ( 5 .1 m m ) 0 .0 5 0 ( 1 .2 7 m m ) 0 .2 0 0 ( 1 0 .2 m m ) Environmental and Mechanical Characteristics Operating temp. range Mechanical Shock Thermal Shock Vibration Hermetic Seal Soldering conditions see part # table Per MIL-STD-202, Method 213, Cond. E Per MIL-STD-883, Method 1011, Cond. A Per MIL-STD-883, Method 2007, Cond. A Leak rate less than 1x10-8 atm.cc/s of helium See MAX reflow profile below Maximum Reflow Profile 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: nelsales@nelfc.com www.nelfc.com