SC-A142A-FREQ

SC-B1420 Series LVCMOS SC-B1420 Series Rev Frequency Range: 1.0 MHz to 80.0 MHz Description The SC-B1420 Series of quartz crystal oscillators provide enable/disable 3-state LVCMOS compatible signals for bus connected systems. Supplying Pin 1 of the SC-B1420 units with a logic “1” or open enables its Pin 3 output. In the disable mode, Pin 3 presents a high impedance to the load. Features Size, mm 5x7 I/O 4 pad Supply Voltage 3.3V / 2.5V / 5V • High Reliability - NEL HALT/HASS qualified for crystal oscillator start-up conditions • Low jitter - Wavecrest jitter characterization available • Wide frequency range—1.0 MHz to 80.0 MHz • User specified tolerance available • Will withstand vapor phase temperatures of 253°C for 4 minutes maximum • Space-saving alternative to discrete component oscillators • 2.5 Volt operation • High shock resistance, to 1000g • No internal PLL avoids cascading PLL problems • Metal lid electrically connected to ground to reduce EMI • Gold plated pads • RoHS Compliant, Lead Free Construction Creating a Part Number SC - B142X - FREQ Package Code SC 4 pad 5x7 mm SMD Input Voltage Code Specification A 3.3 V B 2.5 V 5V Tolerance/Performance 0 ±100 ppm 0-70°C 1 ±50 ppm 0-70°C 7 ±25 ppm 0-70°C 9 Customer Specific A ±20 ppm 0-70°C B ±50 ppm -40 to +85°C C ±100 ppm -40 to +85°C Drawing Specifications Electrical Connection Pin 1 2 3 4 Connection Enable/Disable Ground Output VDD For the most up to date specifications on each NEL product, log on to our website— www.nelfc.com Dimensions shown in inches and millimeters. All tolerances are ±0.005 inches (±0.127mm) unless otherwise specified. 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone: 262-763-3591 Fax: 262-763-2881 Email: nelsales@nelfc.com www.nelfc.com LVCMOS SC-B1420 Series Rev Frequency Range: 1.0 MHz to 80.0 MHz Operating Conditions and Output Characteristics Electrical Characteristics Parameter Symbol Frequency Duty Cycle Logic 0 Logic 1 Rise & Fall Time Jitter, RMS(2) Tpz Enable Voltage Disable Voltage Frequency Stability(1) — — VOL VOH tr, tf — — — — dF/F Conditions — @ VDD/2 @ 600 µA @ 600 µA 10-90% VO — — — — Overall conditions including: voltage, calibration, temp., 10 yr aging, shock, vibration Min 1.0 MHz 45/55% — VDD -0.2 V — — — 2.0 V — -100 ppm Typical — — — — — 3 psec — — — — Max 80.0 MHz 55/45% 0.2 V — 8.0 ns — 25 ns — 0.8 V +100 ppm General Characteristics Parameter Symbol Supply Voltage(3) Supply Current Output Current Operating Temperature Storage Temperature Power Dissipation Lead Temperature Load Start-up Time VDD IDD IO TA TS PD TL — tS Conditions 2.5V±5% No Load Low level Output Current — — — Soldering, 10 sec. — 20 MHz or greater Less than 20 MHz Min 2.375 V 0.0 mA 0.0 mA 0ºC -55ºC — — — — — Typical 2.5 V — — — — — — — — — Max 2.625 V 40 mA ±16.0 mA 70ºC 125ºC 105 mW 300ºC 15 pf 10 ms 2 ms Environmental and Mechanical Characteristics Mechanical Shock Thermal Shock Vibration Soldering Condition Hermetic Seal Per MIL-STD-202, Method 213, Condition E Per MIL-STD-833, Method 1011, Condition A 0.060" double amplitude 10 Hz to 55 Hz, 35g’s 55 Hz to 2000 Hz 300ºC for 10 seconds Leak rate less than 1 x 10 -8 atm.cc/sec Footnotes: 1) Standard frequency stability (±20, ±25, ±50 ppm & others available). 2) Jitter performance is frequency dependent. Please contact factory for full Wavecrest characterization. 3) External high frequency power supply decoupling required.