CRYSTAL CLOCK OSCILLATORS
Data Sheet 0629J Rev. B
PECL/LVPECL HF VCXO
SU-X36CXXX Series
Description
The SU-X36CXXX Series of voltage controlled crystal oscillators (VCXO) provides high frequency with PECL/LVPECL complementary outputs. The outputs can be disabled for test automation or combining multiple clocks. The device does not use any frequency multiplication, providing exceptionally low Phase Noise and Jitter. It is packaged in a miniature, FR-4 based 9x14 mm SMD package.
Applications and Features
• Wide frequency range – 12.0MHz to 280.000MHz • Fiber Channel; 10 GbE; Infiniband; Network Processors; SONET/SDH • High Reliability - NEL HALT/HASS qualified for crystal oscillator start-up conditions • Extremely Low Phase Noise, Low Jitter • No Multiplication • SONET ±20ppm overall free-run stability available • Absolute Pull Range (APR) to ±100 ppm • High shock resistance, to 1000g • RoHS Compliant, Lead Free Construction
Creating a Part Number SU - X 36C X X X - FREQ Package Code Absolute Pull Range, ppm SU 6 pad 9x14mm SMD E ±20 F ±32 Input Voltage G ±50 5.0V±5% H ±100 A 3.3V±5% 9 Customer specific B 2.5V±5% Enable Option H Enable High L Enable Low Temperature Range, °C A 0 to 50 B 0 to 70 C -20 to 70 D -40 to 85 9 Customer specific
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: nelsales@nelfc.com www.nelfc.com
CRYSTAL CLOCK OSCILLATORS
SU-X36CXXX Series Continued PECL/LVPECL HF VCXO
Data Sheet 0629J Rev. B
Absolute Maximum Ratings
Parameter Operating Temperature Range Storage Temperature Range Supply Voltage Enable/Disable Voltage Parameter Nominal Frequency Supply Voltage Supply current Output Logic Type Load Output Levels Symb Fo Vcc Icc Symbol To Tst Vcc Ven/dis Conditions, Note Code Code A Code B Output to Vcc-2V, or Thevenin Equivalent overall Value -40 to +85 -50 to +90 -0.5 to 4.5 0 to Vcc MIN 12 4.75 3.135 2.375 TYP 5.0 3.3 2.5 60
LVPECL
Unit ºC ºC V V MAX 280 5.25 3.465 2.625 80 Unit MHz V mA Ohm V Vcc1.620 55/45 0.7 0.2 1.0
Electrical Parameters
50
Voh Vol
Vcc1.025 45/55 50/50 0.5 0.1
Duty Cycle (Symmetry) Rise/Fall Time Jitter Integrated
Tr/Tf J
Wavecrest characterized
Sub-harmonics Phase Noise
At 50% of output voltage swing 20 to 80, 80 to 20 % Integrated from Phase Noise, 12 KHz to 20 MHz, RMS 10 Hz to 80 KHz, RMS 50 Khz to 80 Mhz Random period, Accumul., pk-to-pk Deterministic @ 10 Hz @100 Hz @1 KHz @10KHz @100KHz @>1MHz Overall, including initial calibration, temperature, aging 10 years, shock and vibration @ Vc=Vcc/2; APR 50ppm, or less Vc to set F at Fo; T, Vcc, load - nominal, as shipped Over all conditions, see part # creation @ Fmod < 100 Khz At Vc = Vcc/2, -3dB Pin 2 = Low, 0 to Vcc1.62V Pin 2 = High, Vcc-1.025V to Vcc 155.52 MHz
% ns ps ps ps ps ps ps dBc
dBc/Hz
0.3 2.5 17 0 None -75 -105 -128 -142 -147 -147 ±30
£(Δf)
Frequency Stability, usually not specified unless necessary, APR is specified to incorporate stability Control Voltage Range Setability Absolute Pull Range Input Impedance Modulation Bandwidth Enable Disable
ΔF/F
±20
-70 -100 -125 -140 -145 -145
ppm
Vc Vcs APR Zin
0V 0.4 Vcc 20,32, 50,100 50 20
0.5 Vcc
Vcc 0.6 Vcc
V V ppm KOhm KHz
Enabled Disabled, Pin 4 = Logic “1", Pin 5 = Logic “0"
V V
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: nelsales@nelfc.com www.nelfc.com
CRYSTAL CLOCK OSCILLATORS
SU-X36CXXX Series Continued PECL/LVPECL HF VCXO
Electrical Connection Pin Connection 1 Vco 2 Enable/Disable 3 VEE 4 Output 5 Output Complement 6 VCC
Rev. B
Environmental and Mechanical Characteristics
Operating temp. range Mechanical Shock Thermal Shock Vibration Hermetic Seal Soldering conditions see part # table Per MIL-STD-202, Method 213, Cond. E Per MIL-STD-883, Method 1011, Cond. A Per MIL-STD-883, Method 2007, Cond. A Leak rate less than 1x10-8 atm.cc/s of helium See MAX reflow profile below
Maximum Reflow Profile
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: nelsales@nelfc.com www.nelfc.com