NHD-12864WG-FTTI-VZ#000

NHD-12864WG-FTTI-VZ#000 Graphic Liquid Crystal Display Module NHD12864WGFTTIVZ#000- Newhaven Display 128 x 64 Pixels Display Type: Graphic Model White LED Backlight FSTN, Negative Transmissive, Wide Temperature, 6:00 Optimal View Built-in Negative voltage 2x10 straight vertical header (Molex 10-89-7201 or equivalent) for CON1: RA=18Ω SMT 1206Resistor & Short J1 RoHS Compliant Newhaven Display International, Inc. 2661 Galvin Ct. Elgin IL, 60124 Ph: 847-844-8795 Fax: 847-844-8796 www.newhavendisplay.com nhtech@newhavendisplay.com nhsales@newhavendisplay.com Document Revision History Revision 0 1 2 3 4 5 Date 10/22/08 3/23/10 5/6/10 11/1/16 8/15/18 2/14/19 Description Initial Release User guide reformat Block diagram/initialization updated Mechanical Drawing, Electrical & Optical Char. Updated Supply Current & Backlight Current Updated Backlight Module Redesign Functions and Features • • • • • 128 x 64 pixels Built-in RA6963 Controller +5.0V power supply 1/64 duty cycle RoHS Compliant [2] Changed by BE BE SB SB SB 1 2 3 4 5 6 7 SYMBOL 8 REVISION DATE A A 87.0±0.5 80.0 72.0 (VA) 66.52(AA) 2.5 9.0 0.52 0.48 B 65.0 2 1 15.4 D 22.86 (P2.54*9) 82.0 Notes: 1. Driver: 2. Display Mode: 3. Op�mal View: 4. Voltage: 5. Backlight: 6. Driver IC: 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1.6 4- 2.5PTH 4- 5.0PAD 2 3 0.64 2.54 5.85 1/64 Duty FSTN Nega�ve / Transmissive 6:00 5.0V VDD, 8.5V VLCD White LED RA6963 P2.54*9=22.86 25.4 5 6 D E STANDARD TOLERANCE: REVISION: DRAWING/PART NUMBER: 1.0 NHD-12864WG-FTTI-VZ#000 2.54 4 Vss Vdd Vo C/D RD WR DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 CE RST Vee MD2 FS1 HLT (UNLESS OTHERWISE SPECIFIED) LINEAR: ±0.3mm 2.72 F 20- 1.0PTH 20- 1.8PAD 2.54 2.5 E C 20 19 1.5 2.54 C 70.0±0.5 50.2 40.0(VA) 33.24(AA) 0.52 0.48 B 13.6MAX 9.9 15.0 18.38 4.0 7.5 10.24 UNLESS OTHERWISE SPECIFIED: DRAWN BY: - DIMENSIONS ARE IN MILLIMETERS DRAWN DATE: - THIRD ANGLE PROJECTION S. Baxi 02/14/19 APPROVED BY: SIZE: A3 S. Baxi SCALE: APPROVED DATE: DO NOT SCALE DRAWING NS 02/14/19 SHEET 1 OF 1 THIS DRAWING IS SOLELY THE PROPERTY OF NEWHAVEN DISPLAY INTERNATIONAL, INC. THE INFORMATION IT CONTAINS IS NOT TO BE DISCLOSED, REPRODUCED OR COPIED IN WHOLE OR PART WITHOUT WRITTEN APPROVAL FROM NEWHAVEN DISPLAY. 7 8 F Pin Description and Wiring Diagram Pin No. 1 2 3 4 5 6 7-14 15 16 17 18 19 20 A K Symbol VSS VDD V0 C/D /RD /WR DB0-DB7 /CE /RST VEE MD2 FS1 HLT LED+ LED- External Connection Power Supply Power Supply Adj. Power Supply MPU MPU MPU MPU MPU MPU Power Supply MPU MPU MPU Power Supply Power Supply Function Description Ground Supply Voltage for logic (+5.0V) Supply Voltage for contrast (approx. -3.0V ) Register Select signal. C/D=0: DATA C/D=1: COMMAND Active LOW Read signal Active LOW Write signal Bi-directional 8-bit data bus Active LOW Chip enable Active LOW Reset Signal Negative voltage output (-5.0V) Column select; H:32 column; L: 40 column Font Select: 1: 6x8 fonts, 0: 8x8 fonts Clock operating stop signal Backlight Anode (+3.5V) Backlight Cathode (Ground) Recommended LCD connector: 2.54mm pitch pins Backlight connector: - Mates with: - [4] Electrical Characteristics Item Operating Temperature Range Storage Temperature Range Supply Voltage Supply Current Supply for LCD (contrast) “H” Level input “L” Level input “H” Level output “L” Level output Backlight Supply Voltage Backlight Supply Current Backlight Lifetime Symbol TOP TST VDD IDD VLCD VIH VIL VOH VOL Condition Absolute Max Absolute Max VDD = 5.0V TOP = 25°C - Min. -20 -30 4.5 32 8.2 VDD - 2.2 VSS VDD-0.3 VSS Typ. 5.0 80 8.5 - Max. +70 +80 5.5 102 8.8 VDD 0.8 VDD 0.3 Unit ⁰C ⁰C V mA V V V V V VLED ILED - VLED = 5.0V ILED = 64mA 4.9 48 - 5.0 64 50,000 5.1 80 - V mA Hrs. Optical Characteristics Optimal Viewing Angles Item Top Bottom Left Right Contrast Ratio Response Time Rise Fall Symbol ϕY+ ϕYθXθX+ CR TR TF Condition CR ≥ 2 TOP = 25°C Min. 2 - Typ. 30 60 45 45 5 200 250 Max. 300 350 Controller Information Built-in RA6963 Controller. Please download specification at http://www.newhavendisplay.com/app_notes/RA6963.pdf [5] Unit ⁰ ⁰ ⁰ ⁰ ms ms Table of Commands [6] Timing Characteristics [7] Example Initialization Program //================================================= #define LCM_PORT P1 //DB0~DB7,DATA BUS sbit CD = P3^0; // DATA / INSTRUCTION sbit FS = P3^1; // CHIP ENABLE sbit MD2 = P3^2; // CHIP RESET sbit RESET = P3^3; // CHOICE CHIP1 sbit CE = P3^4; // CHIP READ/WRITE sbit WR = P3^6; // CHOICE CHIP2 sbit RD = P3^7; //------------------------------------------------// initial T6963C //------------------------------------------------void Initial_T6963C() { /*write text home address=0000h */ Write_data(0x00); Write_data(0x00); Write_command(0x40); Write_data(0x80); Write_data(0x00); Write_command(0x42); /*write text area address*/ Write_data(0x10); Write_data(0x00); Write_command(0x41); /*write graphic area address*/ Write_data(0x10); Write_data(0x00); Write_command(0x43); /*set display mode Display mode set (Graphic only enable)*/ Write_command(0x80); /*Graphic display enable*/ Write_command(0x98); } //------------------------------------------------// Write Data Function //------------------------------------------------void Write_data(data){ P1=data; CD=0; CE=0; WR=0; CE=1; WR=1; } //------------------------------------------------// Write Command Function //------------------------------------------------void Write_command(command){ P1 = command; CD=1; CE=0; WR=0; CE=1; WR=1; } //================================================= [8] Quality Information Test Item Content of Test High Temperature storage Endurance test applying the high storage temperature for a long time. Endurance test applying the low storage temperature for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. Endurance test applying vibration to simulate transportation and use. Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature / Humidity Operation Thermal Shock resistance Vibration test Static electricity test Test Condition Endurance test applying electric static discharge. 2 -30⁰C , 200hrs 1,2 +70⁰C 200hrs 2 -20⁰C , 200hrs 1,2 +60⁰C , 90% RH , 96hrs 1,2 -20⁰C,30min -> 25⁰C,5min -> 70⁰C,30min = 1 cycle 10 cycles 10-55Hz , 1.5mm amplitude. 60 sec in each of 3 directions X,Y,Z For 15 minutes VS=±800V, RS=330Ω, CS=150pF 10 Times Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container. Precautions for using LCDs/LCMs See Precautions at www.newhavendisplay.com/specs/precautions.pdf Warranty Information and Terms & Conditions http://www.newhavendisplay.com/index.php?main_page=terms [9] Note +80⁰C , 200hrs 3