NHD-160128WG-BTMI-VZ#-1 数据手册
Product Specification
NHD-160128WG-BTMI-VZ#-1
Newhaven Display International, Inc.
2661 Galvin Court, Elgin, IL 60124 USA
Ph: 847.844.8795 | Fx: 847.844.8796
www.newhavendisplay.com
REACH
Compliant
RoHS
Compliant
Table of Contents
Document Revision History ……………………………………………………………………………………………………………………..…. 2
Functions and Features …………………………………………………………………………………………………………………..………….. 2
Mechanical Drawing ………………………………………………………………………………………………………..…………….….……... 3
Pin Description ……………………………………………………………………………………………………………………………….….……… 4
Electrical Characteristics ……………………………………………………………………………….…………………………………….…….. 5
Optical Characteristics ………………………………………………………………………………………………………………………………… 5
Driver Information ……………………………………………………………………………………………………..………………………………. 5
Table of Commands ……………………………………………………………………………………………………………….…………………… 6
Timing Characteristics ………………………………………………………………………………………………………………………………… 7
Quality Information …………….……………………………………………………………………………………..………………………..……. 9
Additional Resources
➢ Support Forum: http://www.nhdforum.newhavendisplay.com
➢ Github: https://github.com/newhavendisplay
➢ Example Code: https://www.newhavendisplay.com/example_code.html
➢
Knowledge Center: https://www.newhavendisplay.com/knowledge_center.html
➢ Quality Center: https://www.newhavendisplay.com/quality_center.html
➢ Precautions for using LCDs/LCMs: https://www.newhavendisplay.com/specs/precautions.pdf
➢ Warranty / Terms & Conditions: https://www.newhavendisplay.com/terms.html
1
Document Revision History
Revision
Date
Description
Changed By
0
3/16/10
Initial Release
-
1
4/13/10
User guide reformat
BE
2
4/21/10
Block diagram update
BE
3
5/14/10
Updated Input and Output Voltages in Electrical Characteristics
MC
4
5/15/17
Mechanical, Electrical & Optical Characteristics Updated
TM
5
12/29/17
Supply Current Updated
SB
6
9/20/19
Updated Drawing, Controller Link
AS
7
4/8/20
Glass Panel Updated
SB
8
6/24/20
Updated 2D Mechanical Drawing Page, Logic Voltage & Quality
Information
AS
9
7/8/20
Fixed typo on 2D Mechanical Drawing
AS
10
5/12/21
Electrical, Optical & Controller IC Updated
ZP
11
8/12/21
Mechanical Drawing & Quality Information updated
ZP
Functions and Features
•
•
•
•
160 x 28 pixels
Built-in RA6963N1 controller
+5.0V Power Supply
1/128 duty
2
1
A
2
3
Mechanical Drawing
14.0
16.52
5
6
SYMBOL
7
8
REVISION
DATE
A
129.0±0.5
118.0
101.0(VA)
95.96(AA)
3.5
2.9
3.5
7
10.0
12.62
4
2.54
16.5max
11.9
2.5
3.5
B
39.6
B
22.86
(P2.54*9)
102.0±0.5
96.2
95.0
88.0
82.0(VA)
76.76(AA)
CON2
20 19
20- 1.0 PTH
20- 1.8 PAD
A1
K1
F
57.5
57.0
4.0
122.0
Notes:
1. Driving:
2. Votage:
3. Display Type:
4. Optimal View:
5. Backlight:
6. Driver IC:
1
K
20.00
LED B/L
0.60
0.56
2
3
4
NEWHAVEN DISPLAY
NHD-160128WG-BTMI-VZ#_Rev1 B
www.newhavendisplay.com
C-PO#-datecode-Serial Number
Made in china
FG
Vss
VDD
Vo
Vee
WR
RD
CE
C/D
HALT
RESET
DB0
DB1
DB2
DB3
DB4
DB5
DB6
DB7
NC
C
D
E
STANDARD TOLERANCE:
0.56
0.60
1/128 Duty
5V V DD , 19.2V V LED
STN Negative, Blue
6:00
White LED
RA6963N1, 8-bit Parallel MPU
12.00
3.5
D
A
1.6
4- 3.5PTH
4- 5.5PAD
E
1
20
CON1
C
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
2 1
(UNLESS OTHERWISE SPECIFIED)
LINEAR: ±0.3mm
DRAWN BY:
- DIMENSIONS ARE IN MILLIMETERS
DRAWN DATE:
- THIRD ANGLE PROJECTION
6
1B
NHD-160128WG-BTMI-VZ#-1
UNLESS OTHERWISE SPECIFIED:
5
REVISION:
DRAWING/PART NUMBER:
Z.Palrang
08/12/2021
APPROVED BY:
APPROVED DATE:
DO NOT SCALE DRAWING
SIZE:
A3
Z.Palrang
SCALE:
08/12/2021
NS
SHEET 1 OF 1
THIS DRAWING IS SOLELY THE PROPERTY OF NEWHAVEN DISPLAY INTERNATIONAL, INC.
THE INFORMATION IT CONTAINS IS NOT TO BE DISCLOSED, REPRODUCED OR COPIED IN
WHOLE OR PART WITHOUT WRITTEN APPROVAL FROM NEWHAVEN DISPLAY.
7
8
F
Pin Description and Wiring Diagram
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12-19
20
A
K
Symbol
FG
VSS
VDD
V0
VEE
/WR
/RD
/CE
C/D
/HALT
/RESET
DB0-DB7
NC
LED+
LED-
External Connection
Power Supply
Power Supply
Power Supply
Adj. Power Supply
Power Supply
MPU
MPU
MPU
MPU
MPU
MPU
Power Supply
Power Supply
Function Description
Frame Ground
Ground
Power supply for Logic (+5.0V)
Power supply for contrast (approx. -14.2V)
Negative voltage output (-16.0V)
Active LOW Write signal
Active LOW Read signal
Active LOW Chip Select signal.
Register select signal. C/D=1: Command C/D=0: Data
Active LOW Clock operating stop signal
Active LOW Reset signal
This is an 8-bit Bi-directional data bus
No Connect
Backlight Anode (128mA @ 3.5V)
Backlight Cathode (Ground)
Recommended LCD connector: 2.54mm pitch pins
Backlight connector: Mates with: -
4
Electrical Characteristics
Item
Operating Temperature Range
Storage Temperature Range
Supply Voltage
Supply Current
Supply for LCD (contrast)
“H” Level input
“L” Level input
“H” Level output
“L” Level output
Backlight Supply Voltage
Backlight Supply Current
Backlight Lifetime
Symbol
TOP
TST
VDD
IDD
VLCD
VIH
VIL
VOH
VOL
Condition
Absolute Max
Absolute Max
VDD = 5.0V
TOP = 25°C
-
Min.
-20
-30
4.5
15
18.6
0.8*VDD
VSS
VDD-0.3
VSS
Typ.
5.0
30
19.2
-
Max.
+70
+80
5.5
60
19.8
VDD
0.15*VDD
VDD
0.3
Unit
⁰C
⁰C
V
mA
V
V
V
V
V
VLED
ILED
-
VLED = 3.5V
ILED = 80mA
3.4
96
-
3.5
128
50,000
3.6
160
-
V
mA
Hrs.
Optical Characteristics
Optimal
Viewing
Angles
Item
Top
Bottom
Left
Right
Contrast Ratio
Response Time
Rise
Fall
Symbol
ϕY+
ϕYθXθX+
CR
TR
TF
Condition
CR ≥ 2
TOP = 25°C
Min.
0
0
0
0
2
-
Typ.
3
200
250
Max.
20
40
30
30
300
350
Unit
⁰
⁰
⁰
⁰
ms
ms
Controller Information
Built-in RA6963N1 Controller.
Please download specification at https://www.newhavendisplay.com/resources_dataFiles/datasheets/LCDs/RA6963.pdf
5
Table of Commands
6
Timing Characteristics
7
Example Initialization Program
//------------------------------------------------------------------------------sbit ID = P3^1;
sbit CS = P3^1;
sbit RW = P3^0;
sbit CE = P3^4;
//sbit READ = P0^0;
sbit FS = P3^2;
sbit RST = P3^6;
//------------------------------------------------------------------------------void Writecom(char i)
{
P1 = i;
ID = 1;
CE = 0;
RW = 0;
//delay(1);
RW = 1;
CE = 1;
//delay(1);
}
void Writedata(char i)
{
P1 = i;
ID = 0;
CE = 0;
RW = 0;
//delay(1);
RW = 1;
CE = 1;
//delay(1);
}
//------------------------------------------------------------------------------void Init()
{
RST = 1;
RD = 1;
FS = 0;
Writedata(0x00);
Writedata(0x00);
Writecom(0x40);
Writedata(0x00);
Writedata(0x40);
Writecom(0x42);
Writedata(0x1E);
Writedata(0x00);
Writecom(0x41);
Writedata(0x1E);
Writedata(0x00);
Writecom(0x43);
Writecom(0x80);
}
8
Quality Information
Test Item
Content of Test
High Temperature storage
Endurance test applying the high storage
temperature for a long time.
Endurance test applying the low storage
temperature for a long time.
Endurance test applying the electric stress
(voltage & current) and the high thermal
stress for a long time.
Endurance test applying the electric stress
(voltage & current) and the low thermal
stress for a long time.
Endurance test applying the electric stress
(voltage & current) and the high thermal
with high humidity stress for a long time.
Endurance test applying the electric stress
(voltage & current) during a cycle of low
and high thermal stress.
Endurance test applying vibration to
simulate transportation and use.
Low Temperature storage
High Temperature
Operation
Low Temperature
Operation
High Temperature /
Humidity Operation
Thermal Shock resistance
Vibration test
Static electricity test
Endurance test applying electric static
discharge.
Test Condition
Note
+80⁰C , 200 Hrs.
2
-30⁰C , 200 Hrs.
1,2
+70⁰C , 200 Hrs.
2
-20⁰C , 200 Hrs.
1,2
+60⁰C , 90% RH , 96 Hrs.
1,2
-20⁰C,30min -> 25⁰C,5min ->
70⁰C,30min = 1 cycle
10 cycles
10-55Hz , 1.5mm amplitude.
60 sec in each of 3 directions
X,Y,Z
For 15 minutes
VS=±800V, RS=330Ω, CS=150pF
10 Times
3
Note 1: No condensation to be observed.
Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH.
Note 3: Test performed on product itself, not inside a container.
9
NHD-160128WG-BTMI-VZ#-1 价格&库存
很抱歉,暂时无法提供与“NHD-160128WG-BTMI-VZ#-1”相匹配的价格&库存,您可以联系我们找货
免费人工找货