NHD-24064WG-ATMI-VZ#

Product Specification NHD-24064WG-ATMI-VZ# Newhaven Display International, Inc. 2661 Galvin Court, Elgin, IL 60124 USA Ph: 847.844.8795 | Fx: 847.844.8796 www.newhavendisplay.com REACH Compliant RoHS Compliant Table of Contents Document Revision History .......................................................................................................................... 2 Mechanical Drawing .................................................................................................................................... 3 Pin Description ............................................................................................................................................ 4 Wiring Diagram ........................................................................................................................................... 4 Electrical Characteristics .............................................................................................................................. 5 Optical Characteristics ................................................................................................................................. 5 Controller Information................................................................................................................................. 5 Table of Commands ..................................................................................................................................... 6 Timing Characteristics .................................................................................................................................. 7 Built-in Font Table ....................................................................................................................................... 8 Example Initialization Program .................................................................................................................... 9 Quality Information ................................................................................................................................... 10 Additional Resources ➢ Support Forum: https://support.newhavendisplay.com/hc/en-us/community/topics ➢ GitHub: https://github.com/newhavendisplay ➢ Example Code: https://support.newhavendisplay.com/hc/en-us/categories/4409527834135-Example-Code/ ➢ Knowledge Center: https://www.newhavendisplay.com/knowledge_center.html ➢ Quality Center: https://www.newhavendisplay.com/quality_center.html ➢ Precautions for using LCDs/LCMs: https://www.newhavendisplay.com/specs/precautions.pdf ➢ Warranty / Terms & Conditions: https://www.newhavendisplay.com/terms.html 1 Document Revision History Revision Date Description Changed By 0 02/28/2008 Initial Release - 1 04/19/2010 User guide reformat BE 2 05/13/2010 Updated Backlight Supply Voltage and Current MC 3 11/16/2010 Pin description update AK 4 05/04/2012 Optical characteristics updated AK 5 05/06/2013 Electrical and optical characteristics updated. Wiring diagram and mechanical drawing updated. Font table added. JN 6 10/31/2016 Mechanical Drawing, Electrical & Optical Char. Updated SB 7 01/17/2017 PCB Redesign SB 8 05/25/2018 VEE Reset to -10V SB 9 08/15/2018 Supply Current & Backlight Voltage Updated SB 10 02/13/2019 Supply Current Updated SB 11 05/12/2021 Electrical, Optical & Controller IC Updated ZP 12 08/17/2021 Updated Mechanical Drawing ZP 13 08/02/2022 Updated Backlight Supply Current CJ 2 1 A 2 Mechanical Drawing 3 4 5 6 SYMBOL 7 8 REVISION DATE A Pin Assignment B C C 20.00 D 12.00 Notes: 1. Driver: 2. Voltage: 3. Display Mode: 4. Op�mal View: 5. Backlight: 6. Driver IC: 1 D NEWHAVEN DISPLAY NHD-24064WG-ATMI-VZ#_Rev1D www.newhavendisplay.com C-PO#-datecode-Serial Number Made in China E F B E Standard Tolerance: 1/64 Duty, 1/9 Bias 5.0V VDD STN Nega�ve / Blue / Transmissive 6:00 Edge White LED RA6963N1 2 3 (Unless otherwise specified) Linear: ±0.3mm Unless otherwise specified: • Dimensions are in Millimeters • Third Angle Projection Revision: Drawing/Part Number: NHD-24064WG-ATMI-VZ# Drawn By: Drawn Date: Z.Palrang 08/17/2021 Approved By: Approved Date: Do Not Scale Drawing Size: Z.Palrang 08/17/2021 1D A3 Scale: NS Sheet 1 of 1 This drawing is solely the property of Newhaven Display International, Inc. The information it contains is not to be disclosed, reproduced or copied in whole or part without written approval from Newhaven Display. 4 5 6 7 8 F Pin Description Pin No. 1 2 3 4 5 6 7 8 9 10 11~18 19 20 A K Symbol FGND VSS VDD V0 /WR /RD /CE C/D VEE RESET DBO~DB7 FS NC LED+ LED- External Connection Power Supply Power Supply Power Supply Adj. Power Supply MPU MPU MPU MPU Power Supply MPU MPU MPU Power Supply Power Supply Function Description Frame Ground Ground Power supply for logic (+5.0V) Power supply for contrast (approx. -7V) Active LOW Write signal Active LOW Read signal Active LOW chip enable Register Select signal C/D=0: DATA C/D=1: COMMAND Negative voltage output (-10V) Active LOW reset signal 8-bit Bi-directional data bus Font Select: 1=6x8 fonts, 0=8x8 fonts No Connect Backlight Anode (+3.5V) Backlight Cathode (Ground) Recommended LCD connector: 2.54mm pitch pins Backlight connector: JST-XHP-3 Mates with: B 3B-XH-A Wiring Diagram 4 Electrical Characteristics Item Operating Temperature Range Storage Temperature Range Supply Voltage Supply Current Supply for LCD (contrast) “H” Level input “L” Level input “H” Level output “L” Level output Backlight Supply Voltage Backlight Supply Current Backlight Lifetime Symbol TOP TST VDD IDD VLCD VIH VIL VOH VOL Condition Absolute Max Absolute Max VDD = 5.0V TOP = 25°C - Min. -20 -30 4.5 8.2 12.1 0.8*VDD VSS VDD-0.3 VSS Typ. 5.0 16.5 12.5 - Max. +70 +80 5.5 33 12.9 VDD 0.15*VDD VDD 0.3 Unit ⁰C ⁰C V mA V V V V V VLED ILED - VLED = 3.5V ILED = 80mA 3.4 60 - 3.5 80 50,000 3.6 100 - V mA Hrs. Optical Characteristics Optimal Viewing Angles Item Top Bottom Left Right Contrast Ratio Response Time Rise Fall Symbol ϕY+ ϕYθXθX+ CR TR TF Condition CR ≥ 2 TOP = 25°C Min. 0 0 0 0 2 - Typ. 3 200 250 Max. 20 40 30 30 300 350 Unit ⁰ ⁰ ⁰ ⁰ ms ms Controller Information Built-in RA6963N1 Controller. Please download specification at https://support.newhavendisplay.com/hc/en-us/articles/4414786723479-RA6963 5 Table of Commands 6 Timing Characteristics 7 Built-in Font Table 8 Example Initialization Program void command(int A) { P1 = A; ID = 1; CE = 0; WRT = 0; WRT = 1; CE = 1; } void data(int A) { P1 = A; ID = 0; CE = 0; WRT = 0; WRT = 1; CE = 1; } void init() { RST = 1; RDD = 1; F_S = 1; data(0x00); data(0x00); commnd(0x40); data(0x00); data(0x40); command(0x42); data(0x1E); data(0x00); command(0x41); data(0x1E); data(0x00); command(0x43); command(0x80); } //Command //Data //Set Text Home Address //Low Address Columns //High Address //Set Graphic Home Address //Low Address Columns //High Address //Set Text Area //Low Address Columns //High Address //Set Graphic Area //Mode Set to 'OR' mode 9 Quality Information Test Item Content of Test High Temperature storage Endurance test applying the high storage temperature for a long time. Endurance test applying the low storage temperature for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. Endurance test applying vibration to simulate transportation and use. Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature / Humidity Operation Thermal Shock resistance Vibration test Static electricity test Endurance test applying electric static discharge. Test Condition Note +80⁰C, 96 Hrs. 2 -30⁰C, 96 Hrs. 1,2 +70⁰C 96 Hrs. 2 -20⁰C, 96 Hrs. 1,2 +60⁰C, 90% RH, 96 Hrs. 1,2 -20⁰C,30min -> 25⁰C,5min -> 70⁰C,30min = 1 cycle 10 cycles 10-55Hz, 1.5mm amplitude. 60 sec in each of 3 directions X,Y,Z For 15 minutes VS=±800V, RS=330Ω, CS=150pF 10 Times 3 Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container. 10