NHD-24064WG-AYYH-VZ#

Product Specification NHD-24064WG-AYYH-VZ# Newhaven Display International, Inc. 2661 Galvin Court, Elgin, IL 60124 USA Ph: 847.844.8795 | Fx: 847.844.8796 www.newhavendisplay.com REACH Compliant RoHS Compliant Table of Contents Document Revision History ……………………………………………………………………………………………………………………..…. 2 Functions and Features …………………………………………………………………………………………………………………..………….. 2 Mechanical Drawing ………………………………………………………………………………………………………..…………….….……... 3 Pin Description ……………………………………………………………………………………………………………………………….….……… 4 Electrical Characteristics ……………………………………………………………………………….…………………………………….…….. 5 Optical Characteristics ………………………………………………………………………………………………………………………………… 5 Controller Information ……..………………………………………………………………………………………..………………………………. 5 Table of Commands ………………………………………..…………………………………………………………………….…………………… 6 Timing Characteristics ……………..………………………………………………………………………………………………………………… 7 Built-in Font Table ……………………………………………………………………………………………………..………………………..……. 8 Example Code …………………………………..………………………………………………………………..……………………………….….... 9 Quality Information ………………………………………………………………………………………………….………………………………. 10 Additional Resources ➢ Support Forum: http://www.nhdforum.newhavendisplay.com ➢ Github: https://github.com/newhavendisplay ➢ Example Code: https://www.newhavendisplay.com/example_code.html ➢ Knowledge Center: https://www.newhavendisplay.com/knowledge_center.html ➢ Quality Center: https://www.newhavendisplay.com/quality_center.html ➢ Precautions for using LCDs/LCMs: https://www.newhavendisplay.com/specs/precautions.pdf ➢ Warranty / Terms & Conditions: https://www.newhavendisplay.com/terms.html 1 Document Revision History Revision Date Description Changed By 0 2/28/08 Initial Release - 1 4/19/10 User guide reformat BE 2 5/13/10 Updated Backlight Current Min/Max- New Mechanical Drawing: Backlight Connector Cable is not on this display MC 3 5/14/10 Mechanical drawing update MP 4 5/14/10 Drawing update MP 5 11/16/10 Pin description update AK 6 9/20/11 Mechanical Drawing Updated TJ 7 5/16/12 Optical characteristics updated AK 8 2/28/13 Electrical characteristics updated AK 9 5/7/13 Wiring diagram and font table updated. JN 10 8/21/17 Mechanical, Electrical & Optical Characteristics Updated SB 11 8/23/19 PCB Redesign SB 12 05/18/21 Electrical, Optical & IC Updated ZP 13 08/23/21 Updated Mechanical Drawing ZP Functions and Features • • • • 240 x 64 pixels Built-in RA6963N1 controller +5.0V Power Supply 1/64 duty 2 1 A 2 Mechanical Drawing 3 4 5 6 SYMBOL 7 8 REVISION DATE A Pin Assignment B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 C D 190.0±5.0 F A1 Notes: 1. Driver: 2. Voltage: 3. Display Mode: 4. Op�mal View: 5. Backlight: 6. Driver IC: 1 A3 K3 1/64 Duty, 1/9 Bias 5V VDD, 12.5V VLCD STN Posi�ve/ Yellow-Green / Transflec�ve 6:00 Yellow-Green LED RA6963N1 2 3 4 RED LINE 0.53 0.49 E 0.53 0.49 A2 K2 K1 WHITE LINE FG VSS VDD V0 /WR /RD /CE C/D VEE(NC) /RESET DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 FS NC(VEE) B C D E STANDARD TOLERANCE: (UNLESS OTHERWISE SPECIFIED) Component Side LINEAR: ±0.3mm 6 1A NHD-24064WG-AYYH-VZ# UNLESS OTHERWISE SPECIFIED: DRAWN BY: - DIMENSIONS ARE IN MILLIMETERS DRAWN DATE: - THIRD ANGLE PROJECTION 5 REVISION: DRAWING/PART NUMBER: Z.Palrang 08/23/2021 APPROVED BY: SIZE: A3 Z.Palrang SCALE: APPROVED DATE: DO NOT SCALE DRAWING 08/23//2021 NS SHEET 1 OF 1 THIS DRAWING IS SOLELY THE PROPERTY OF NEWHAVEN DISPLAY INTERNATIONAL, INC. THE INFORMATION IT CONTAINS IS NOT TO BE DISCLOSED, REPRODUCED OR COPIED IN WHOLE OR PART WITHOUT WRITTEN APPROVAL FROM NEWHAVEN DISPLAY. 7 8 F Pin Description and Wiring Diagram Pin No. 1 2 3 4 5 6 7 8 9 10 11~18 19 20 A K Symbol FGND VSS VDD V0 /WR /RD /CE C/D VEE /RST DBO~DB7 FS NC LED+ LED- External Connection Power Supply Power Supply Power Supply Adj. Power Supply MPU MPU MPU MPU Power Supply MPU MPU MPU Power Supply Power Supply Function Description Frame Ground Ground Power supply for logic (+5.0V) Power supply for contrast (approx. -7.5V) Active LOW Write signal Active LOW Read signal Active LOW chip enable Register Select signal C/D=0: DATA C/D=1: COMMAND Negative voltage output (-10V) Active LOW Reset signal 8-bit Bi-directional data bus Font Select: 1=6x8 fonts, 0=8x8 fonts No Connect Backlight Anode (4.2V) Backlight Cathode (Ground) Recommended LCD connector: 2.54mm pitch pins Backlight connector: --- Mates with: --- 4 Electrical Characteristics Item Operating Temperature Range Storage Temperature Range Supply Voltage Supply Current Supply for LCD (contrast) “H” Level input “L” Level input “H” Level output “L” Level output Backlight Supply Current Backlight Supply Voltage Lifetime* Symbol TOP TST VDD IDD VLCD VIH VIL VOH VOL Condition Absolute Max Absolute Max VDD = 5.0V TOP = 25°C - Min. -20 -30 4.5 8.2 12.1 0.8*VDD VSS VDD - 0.3 VSS Typ. 5.0 16.5 12.5 - Max. +70 +80 5.5 33 12.9 VDD 0.15*VDD VDD 0.3 Unit ⁰C ⁰C V mA V V V V V ILED VLED - ILED = 660mA TOP = 25°C 528 4.0 - 660 4.2 100,000 792 4.4 - mA V Hrs. *The LED of the backlight is driven by current drain; drive voltage is for reference only. Drive voltage must be selected to ensure backlight current drain is below MAX level stated. Optical Characteristics Optimal Viewing Angles Item Top Bottom Left Right Contrast Ratio Response Time Rise Fall Symbol ϕY+ ϕYθXθX+ CR TR TF Condition CR ≥ 2 TOP = 25°C Min. 0 0 0 0 2 - Typ. 3 200 250 Max. 20 40 30 30 300 350 Unit ° ° ° ° ms ms Controller Information Built-in RA6963N1. Please download specification at https://www.newhavendisplay.com/resources_dataFiles/datasheets/LCDs/RA6963.pdf 5 Table of Commands 6 Timing Characteristics 7 Built-in Font Table 8 Example Program Code void command(int A) { P1 = A; ID = 1; CE = 0; WRT = 0; WRT = 1; CE = 1; } void data(int A) { P1 = A; ID = 0; CE = 0; WRT = 0; WRT = 1; CE = 1; } void init() { RST = 1; RDD = 1; F_S = 1; data(0x00); data(0x00); commnd(0x40); data(0x00); data(0x40); command(0x42); data(0x1E); data(0x00); command(0x41); data(0x1E); data(0x00); command(0x43); command(0x80); } //Command //Data //Set Text Home Address //Low Address Columns //High Address //Set Graphic Home Address //Low Address Columns //High Address //Set Text Area //Low Address Columns //High Address //Set Graphic Areaa //Mode Set to 'OR' mode 9 Quality Information Test Item Content of Test High Temperature storage Endurance test applying the high storage temperature for a long time. Endurance test applying the low storage temperature for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. Endurance test applying vibration to simulate transportation and use. Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature / Humidity Operation Thermal Shock resistance Vibration test Static electricity test Endurance test applying electric static discharge. Test Condition Note +80⁰C, 200hrs 2 -30⁰C, 200hrs 1,2 +70⁰C, 200hrs 2 -20⁰C, 200hrs 1,2 +60⁰C, 90% RH, 96hrs 1,2 -20⁰C, 30min -> 25⁰C, 5min -> 70⁰C, 30min = 1 cycle 10 cycles 10-55Hz, 1.5mm amplitude. 60 sec in each of 3 directions X,Y,Z For 15 minutes Air: ±800V 150pF/330Ω, 5 Times Contact: ±600V 150pF/330Ω, 5 Times 3 Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container. 10