NHD-3.5-320240MF-ASXN#-T

NHD-3.5-320240MF-ASXN#-T TFT (Thin-Film-Transistor) Color Liquid Crystal Display Module NHD3.5320240MFASXN#T- Newhaven Display 3.5” Diagonal 320xRGBx240 Pixels Model Built-in Driver / No Controller Sunlight Readable TFT TN, Wide Temperature RoHS Compliant 4-Wire Resistive Touch Panel Newhaven Display International, Inc. 2661 Galvin Ct. Elgin IL, 60124 Ph: 847-844-8795 Fax: 847-844-8796 www.newhavendisplay.com nhtech@newhavendisplay.com nhsales@newhavendisplay.com Document Revision History Revision 0 1 2 3 4 Date 04/29/16 6/30/16 9/22/16 6/30/20 7/31/20 5 6 1/13/21 3/2/21 Description Initial Release Added Chromaticity Backlight & Supply Current Updated Revised Note on Manual Registers Configuration Updated 2D Mechanical Drawing, Driver IC Part Number to NV3035GTC, Timing Charts & Quality Information Updated 2D Mechanical Drawing Updated Chromaticity Value Typo & RTP Material Characteristics Functions and Features • • • • • • 320xRGBx240 resolution LED backlight 24-bit Digital RGB interface (6.4MHz) 3.3V power supply With 4-Wire resistive Touch Panel Sunlight readable [2] Changed by SB SB SB AS AS AS AS 1 3 4 5 Mechanical Drawing 7 8 REVISION DATE A (3.12) (3.52) (2.3) 2.12±0.2 76.9±0.2 76.6±0.2/TP 72.88±0.15/Bezel opening TP/V,A/71.82 TP/A,A70.08 A,A70.08 (38.45) R GB 0.05+0.20 -0.05 2.01±0.2 (2.41) (3.41) 4.4±0.25 X2 RG B (29.4) A,A52.56 TP/A,A/52.56 TP/V,A/55.05 55.36±0.15/Bezel opening 63.6±0.2/TP 63.9±0.2 B 6 SYMBOL Y1 Y2 TEAR TAPE A 2 TFT Pin Assignment NEWHAVEN DISPLAY WWYY NHD-3.5-320240MF-ASXN#-T Pin No. 1 2 3 4 5 6 7 8 9 10 11 12-19 20-27 28-35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 X1 C NHD-3.5-320240MF_A 0390671 X1 STIFFENER 3±0.3 4.5±0.5 (36.2) 5.5±0.5 27.5±0.5 D 1234 single side area Date code on RTP FPC CONTACT SIDE .5 R0 Component area Y2 55.9±0.5 49.7±0.5 Y1 0.3±0.05 15.7±0.3 WWYY FPC out from the bottom 20.45±0.5 X2 16.55±0.5 single side area 0.3±0.05 27.5±0.2 4 B 1 0.5±0.1 1 2 3 A 54 P0.5*53=26.5±0.05 54.7±0.5 Detail B 2-1 4-0.5 PITCH 1*3=3 5±0.2 4±0.3 F NOTES: 1. Display Size: 3.5” TFT 2. Optimal Viewing Directon: 12:00 3. Display Mode: Transmissive / Normally White / Anti-Glare 4. Driver IC: NV3035GTC 5. Power Supply Voltage: 3.3V 6. Backlight: White LED / 19.2 V (Typ) / 40 mA 7. Brightness: 780 cd/m² (Typ) 8. Touch Panel: 4-Wire Resistive W=0.35 0.35±0.05 2.25 0.2 0.5 3±0.3 E 1 RTP Pin Assignment 0.125 0.35±0.03 DETAIL:A Pin No. 1 2 3 4 Symbol Y1 X1 Y2 X2 Symbol LED_K LED_K LED_A LED_A NC NC NC RSTB SPENB SPCK SPDA B0-B7 G0-G7 R0-R7 HSD VSD CLKIN NC NC VDD VDD NC NC NC NC NC NC NC NC NC DEN GND GND B C D E STANDARD TOLERANCE: (UNLESS OTHERWISE SPECIFIED) LINEAR: ±0.3mm DRAWN BY: - DIMENSIONS ARE IN MILLIMETERS DRAWN DATE: - THIRD ANGLE PROJECTION 5 6 1.0 NHD-3.5-320240MF-ASXN#-T UNLESS OTHERWISE SPECIFIED: 4 REVISION: DRAWING/PART NUMBER: A. Shah 1/13/21 APPROVED BY: APPROVED DATE: DO NOT SCALE DRAWING SIZE: A3 A. Shah SCALE: NS 1/13/21 SHEET 1 OF 1 THIS DRAWING IS SOLELY THE PROPERTY OF NEWHAVEN DISPLAY INTERNATIONAL, INC. THE INFORMATION IT CONTAINS IS NOT TO BE DISCLOSED, REPRODUCED OR COPIED IN WHOLE OR PART WITHOUT WRITTEN APPROVAL FROM NEWHAVEN DISPLAY. 7 8 F Pin Description TFT: Pin No. 1-2 3-4 5-7 8 9 10 11 12-19 20-27 28-35 36 37 38 39-40 41-42 43-51 52 53-54 Symbol LED_K LED_A NC RESET /CS SCK SDI B0-B7 G0-G7 R0-R7 HSYNC VSYNC DOTCLOCK NC VDD NC DEN GND External Connection Power Supply Power Supply MPU MPU MPU MPU MPU MPU MPU MPU MPU MPU Power Supply Power Supply Function Description Backlight Cathode (Ground) Backlight Anode (40mA @ 19.2V) No Connect Active LOW Reset signal Active LOW Serial Chip Select signal Serial Clock signal Serial Data signal Blue Data signals Green Data signals Red Data signals Horizontal (Line) Sync signal Vertical (Frame) Sync signal Dot Clock signal No Connect Supply Voltage for LCD and logic (3.3V) No Connect Data Enable signal (No Connect) Ground Recommended connector: 54pin, 0.5mm pitch, FFC connector. Molex P/N 51296-5494 Resistive Touch Panel: Pin No. 1 2 3 4 Symbol Y1 X1 Y2 X2 External Connection Touch Controller Touch Controller Touch Controller Touch Controller Function Description Left Down Right Up Recommended connector: 4pin, 1.0mm pitch, FFC connector. Molex P/N 52207-0485 Driver Information Built-in NV3035GTC driver. No controller. Please download specification at https://www.newhavendisplay.com/resources_dataFiles/datasheets/LCDs/NV3035GTC.pdf NOTE: Control registers accessible via the display’s 3-wire SPI interface are used to set optimal functionality of the driver IC and TFT panel during manufacturing of the display. These control registers are not intended for use during normal operation of the display. Changing these register values may result in undesired visual artifacts and improper functionality of the display. [4] Electrical Characteristics Item Operating Temperature Range Storage Temperature Range Digital Supply Voltage Supply Current “H” Level input “L” Level input “H” Level output “L” Level output Backlight Supply Voltage Backlight Supply Current Backlight Lifetime* Symbol TOP TST VDD IDD VIH VIL VOH VOL Condition Absolute Max Absolute Max VDD=3.3V - Min. -20 -30 3.0 5 0.8*VDD VSS VDD-0.4 VSS Typ. 3.3 10 - Max. +70 +80 3.6 15 VDD 0.2*VDD VDD VSS+0.4 Unit ⁰C ⁰C V mA V V V V VLED ILED - VLED =19.2V ILED = 40 mA TOP = 25° C 17.4 20,000 19.2 40 50,000 19.8 50 - V mA Hrs. *Backlight lifetime is rated as Hours until half-brightness, under normal operating conditions. Optical Characteristics Optimal Viewing Angles Item Top Bottom Left Right Contrast Ratio Luminance Response Time Rise Fall Red Green Chromaticity Blue White Symbol ϕY+ ϕYθXθX+ CR LV Tr Tf XR YR XG YG XB YG XW YW Condition Min. 200 620 0.520 0.258 0.268 0.578 0.096 0.051 0.223 0.278 CR ≥ 10 ILED = 40 mA TOP = 25° C - Typ. 40 60 60 60 350 780 25 25 0.570 0.308 0.308 0.628 0.146 0.101 0.273 0.328 Touch Panel Characteristics Item Linearity Circuit Resistance – X-Axis Circuit Resistance – Y-Axis Insulation Resistance Operating Voltage Chattering Transmittance Activation Force Pen Writing Durability Pitting Durability Surface Hardness Haze Min. 150 200 20 75 20 20,000 1,000,000 3 2 Typ. 4 Max. 1.5 550 900 5 15 80 6 [5] Unit % Ω Ω MΩ V Ms % g Characters Touches H % Max. 40 40 0.620 0.358 0.358 0.678 0.196 0.151 0.323 0.378 Unit ⁰ ⁰ ⁰ ⁰ cd/m2 ms ms - Timing Characteristics Parameter Symbol Min. Typ. Max. System Operation Timing VDD Power Source Slew Time RSTB active pulse Width TPOR TRSTB 40 CLKIN clock time HSD to CLKIN HSD width VSD width HSD period time VSD setup time VSD hold time HSD setup time HSD hold time Data set-up time Data hold time DEN setup time Time that VSD to 1st line data input Tclk Thc Thwh Tvwh Th Tvst Tvhd Thst Thhd Tdsu Tdhd Tesd 35.7 1 1 60 8 10 8 10 8 10 12 63.56 - 1 67 - Tvs 2 13 127 Tvs 12 20 28 Tvs 17 25 33 1000 Unit Conditions us us From 0V to 90% VDD VDD = 3.3V ns CLKIN CLKIN Th us ns ns ns ns ns ns ns Th Please refer to timing table (P25) Input Output Timing DIN[23:0] to CLKIN DIN[23:0] to CLKIN DEN to CLKIN @C1R601/8bit RGB HV mode Control by HDLY[6:0] setting Tvs = HDLY[6:0] @CCIR656 NTSC mode Control by HDLY[6:0] setting Tvs = HDLY[6:0] @CCIR656 PAL mode Control by HDLY[6:0] setting Tvs = HDLY[6:0] @24bit RGB HV mode Control by HDLY[6:0] setting Tvs = HDLY[6:0] 96% final, CL=30pF, RL=2KΩ 96% final, CL=40pF 96% final, CL=33nF, RL=100Ω Time that CCIR_V to 1st line data input Time that CCIR_V to 1st line data input Time that VSD to 1st line data input Source output stable time 1 Gate output stable time VCOMOUT output stable time Tvs 2 13 127 Tst Tgst Tcst - 25 500 4 30 1000 8 Serial Clock SPCK pulse duty Serial data setup time Serial data hold time Serial clock high/low Chip select distinguish SPENA to VSD SPENB input setup time SPENB input hold time Tspck Tscdut Tisu Tihd Tssw Tcd Tcv Teck Tcke 320 40 120 120 120 1 1 150 150 50 - 60 - ns % ns ns ns us us Ns ns Parameter Symbol Min. Typ. Max. Unit Conditions CLKIN frequency CLKIN cycle time CLKIN pulse duty Time that HSD to 1st data input (NTSC) Fclk Tclk Tcwh 6.1 125 40 6.4 156 50 8.0 164 60 MHz ns % VDD=3.0~3.6V Ths 40 70 255 CLKIN DDLY=70,Offset=0(fixed) Th Th Th us ns us 3-wire serial communication AC timing [6] Tckh/Tspck Tclk Input Data Format Clock and Data Input Timing Diagram [7] 3-wire Timing Diagram Input Data Timing [8] Quality Information Test Item Content of Test High Temperature storage Endurance test applying the high storage temperature for a long time. Endurance test applying the low storage temperature for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. Endurance test applying vibration to simulate transportation and use. Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature / Humidity Operation Thermal Shock resistance Vibration test Static electricity test Test Condition Endurance test applying electric static discharge. 2 -30⁰C , 96hrs 1,2 +70⁰C , 96hrs 2 -20⁰C , 96hrs 1,2 +50⁰C , 90% RH , 96hrs 1,2 -20⁰C,60min -> 25⁰C,5min -> 70⁰C,60min = 1 cycle 20 cycles 10-50Hz , 5G Acceleration 60 sec in each of 3 directions (X,Y,Z) For 30 minutes Air: ±8kV 150pF/330Ω, 5 Times Contact: ±4kV 150pF/330Ω, 5 Times Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container. Precautions for using LCDs/LCMs See Precautions at www.newhavendisplay.com/specs/precautions.pdf Warranty Information and Terms & Conditions http://www.newhavendisplay.com/index.php?main_page=terms [9] Note +80⁰C , 96hrs 3