NHD-5.0-800480TF-ATXL#

NHD-5.0-800480TF-ATXL# TFT (Thin-Film-Transistor) Color Liquid Crystal Display Module NHD5.0800480TFATXL# Newhaven Display 5.0” Diagonal 800xRGBx480 Pixels Model Built-in Driver / No Controller White LED Backlight TFT MVA, Enhanced Optical Characteristics, Wide Temperature RoHS Compliant Newhaven Display International, Inc. 2661 Galvin Court Elgin IL, 60124 Ph: 847-844-8795 Fax: 847-844-8796 www.newhavendisplay.com nhtech@newhavendisplay.com nhsales@newhavendisplay.com Document Revision History Revision 0 1 2 3 4 5 6 7 8 9 10 11 12 13 Date 3/20/2013 8/28/2013 9/16/2014 9/2/15 10/30/15 2/23/16 4/5/16 7/22/16 4/14/17 10/5/18 7/10/19 1/14/20 3/23/20 5/7/20 14 1/29/21 15 16 3/2/21 5/5/21 Description Initial Release Electrical characteristics updated Electrical characteristics updated Driver, Electrical, Optical characteristics updated Backlight lifetime rating added, Datasheet Reformat Corrected Notes on Drawing Brightness Updated Updated Mechanical Drawing, Electrical Characteristics Supply Current Updated Driver IC Updated & Chromaticity Added Timing Characteristics Updated Driver Change to ILI6122, Optical Characteristics Updated FPC Redesign Updated Chromaticity Values, Added Information for DE Mode Operation Production Line Changed Part Revision Updated from Rev1C to Rev1D Updated Silkscreen on FPC Updated Mechanical Drawing Functions and Features • • • • • 800xRGBx480 resolution, up to 16.7M colors 18-LED backlight 24-bit RGB interface Enhanced Optical Characteristics Wide Viewing Angles [2] Changed by AK AK ML AK SB SB SB TM SB SB SB SB SB AS AS AS JT 1 3 Mechanical Drawing 4 5 6 7 SYMBOL 8 REVISION DATE A 120.7±0.3 111.1±0.2(Bezel Opening) 110.3±0.3(TOP-POL) 108(TFT A,A) 1.82±0.2 0.4±0.4 (3.36) A 2 4.8±0.2 0.4±0.4 (6.35) 3.1±0.2 5.0" TFT 800(RGB)*480 BACK B FRONT B 75.8±0.3 67.9±0.2(Bezel Opening) 67.1±0.3(TOP-POL) 64.8(TFT A,A) Tear Tape NEWHAVEN DISPLAY -WWYY NHD-5.0-800480TF-ATXL#_Rev1D White silk on FPC C 30.15±0.2 42.88±0.5 W=0.3 SINGLE AREA 40 0.3±0.05 3.5±0.3 0.5±0.1 P0.5*39=19.5±0.05 5±0.5 23±0.2 K A 20±0.2 Contact side 46±0.3 K 1 Pin No. 1 2 3 4 5-12 13-20 21-28 29 30 31 32 33 34 35 36 37 38 39 40 YU YD XL XR STIFFENER (PI) COMPONENT AREA 16.15±0.3 D 20.5±0.1 10±0.2 R0 .3 70.06±0.3 E F C TFT Pinout: Notes: 1. Display size: 5.0” TFT 2. Display mode: MVA/Transmissive/Normally White/An�-glare 3. Supply Voltage: 3.3V 4. Driver IC: ILI6122 5. Backlight: White LED / 19.2V (Typ) / 60mA (Typ) 6. Brightness: 620 cd/m² (Typ) 7. 3M Brightness Enhancement Film 1 2 3 4 Symbol LEDK LEDA GND VDD [R0-R7] [G0-G7] [B0-B7] GND CLK STBYB HSD VSD DEN NC GND NC(XR) NC(YD) NC(XL) NC(YU) D E STANDARD TOLERANCE: (UNLESS OTHERWISE SPECIFIED) LINEAR: ±0.3mm A+ 5 K- 1D NHD-5.0-800480TF-ATXL# UNLESS OTHERWISE SPECIFIED: DRAWN BY: - DIMENSIONS ARE IN MILLIMETERS DRAWN DATE: - THIRD ANGLE PROJECTION 6 REVISION: DRAWING/PART NUMBER: J.Thomas 5/5/21 APPROVED BY: SIZE: A3 J.Thomas SCALE: APPROVED DATE: DO NOT SCALE DRAWING NS 5/5/21 SHEET 1 OF 1 THIS DRAWING IS SOLELY THE PROPERTY OF NEWHAVEN DISPLAY INTERNATIONAL, INC. THE INFORMATION IT CONTAINS IS NOT TO BE DISCLOSED, REPRODUCED OR COPIED IN WHOLE OR PART WITHOUT WRITTEN APPROVAL FROM NEWHAVEN DISPLAY. 7 8 F Pin Description Pin No. 1 2 3 4 5-12 13-20 21-28 29 30 31 32 33 34 35 36 37 38 39 40 Symbol LEDLED+ GND VDD [R0-R7] [G0-G7] [B0-B7] GND CLKIN STBYB HSD VSD DEN NC GND XR YD XL YU External Connection LED Power Supply LED Power Supply Power Supply Power Supply MPU MPU MPU Power Supply MPU MPU MPU MPU MPU Power Supply - Function Description Ground for Backlight Backlight Power Supply (60mA @ 19.2V) Ground Power supply for LCD and logic (3.3V) Red Data Signals Green Data Signals Blue Data Signals Ground Clock for input data (Rising Edge) 1: Normal Operation; 0: Standby Mode Line synchronization signal Frame synchronization signal Data Enable signal; Positive Polarity (Required in DE mode) No Connect Ground No Connect No Connect No Connect No Connect Recommended LCD connector: 0.5mm pitch 40-Conductor FFC. Molex p/n: 54104-4031 (top contact) Backlight connector: on LCD connector Mates with: --- The ILI6122 driver IC is configured for DE Mode by default which eliminates the need to depend on HSD and VSD timing signals. Using DE mode in place of Sync mode, the display will no longer be affected by changes to the sync timing or porch settings in the event of a driver IC change. This will maintain a consistent display performance for any driver IC changes that may occur in the future. The ILI6122 driver will treat the data on the Dx[7:0] RGB data bus as active display data while DEN is at “H” level and ignore the data on the Dx[7:0] RGB data bus while DEN is at “L” level. Sync Mode can still be provided as the default setting but will need to be ordered as a custom option. Driver Information Built-in ILI6122 Source Driver: http://www.newhavendisplay.com/appnotes/datasheets/LCDs/ILI6122.pdf Built-in ILI5960D Gate Driver: http://www.newhavendisplay.com/appnotes/datasheets/LCDs/ILI5960D.pdf [4] Electrical Characteristics Item Operating Temperature Range Storage Temperature Range Supply Voltage Supply Current “H” Level input “L” Level input “H” Level output “L” Level output Backlight Supply Current Backlight Supply Voltage Backlight Lifetime* Symbol TOP TST VDD IDD VIH VIL VOH VOL Condition Absolute Max Absolute Max VDD = 3.3V - Min. -20 -30 3.0 39 0.7 * VDD GND VDD - 0.4 GND Typ. 3.3 78 - Max. +70 +80 3.6 117 VDD 0.3 * VDD VDD 0.4 Unit ⁰C ⁰C V mA V V V V ILED VLED - ILED = 60mA TOP = 25°C 16.8 - 60 19.2 50,000 75 20.4 - mA V Hrs. - *Backlight lifetime is rated as Hours until half-brightness, under normal operating conditions. The LED of the backlight is driven by current drain; drive voltage is for reference only. Drive voltage must be selected to ensure backlight current drain is below MAX level stated. Optical Characteristics: Optimal Viewing Angles Item Top Bottom Left Right Contrast Ratio Luminance Response Time Red Green Chromaticity Blue White Symbol ϕY+ ϕYθXθX+ CR LV TR + TF XR YR XG YG XB YB XW YW Condition CR ≥ 10 ILED = 60 mA TOP = 25°C - [5] Min. 60 60 60 60 400 500 0.499 0.294 0.293 0.538 0.085 0.053 0.254 0.292 Typ. 70 70 70 70 500 620 25 0.549 0.344 0.343 0.588 0.135 0.103 0.304 0.342 Max. 50 0.599 0.394 0.393 0.638 0.185 0.153 0.354 0.392 Unit ⁰ ⁰ ⁰ ⁰ cd/m2 ms - Timing Characteristics Horizontal Input Timing Parameter Horizontal Display Area Symbol thd DCLK Frequency fclk 1 Horizontal Line HSD Pulse Width HSD Back Porch (Blanking) HSD Front Porch th thpw thb thfp Min 862 1 46 16 Value 800 Typ 33.3 1056 46 210 Unit MHz Max 50 1200 40 46 354 MHz DCLK Vertical Input Timing Parameter Vertical Display Area VSD Period Tim VSD Pulse Width VSD Back Porch (Blanking) VSD Front Porch Symbol tvd tv tvpw tvb tvfp Min 510 1 23 7 Typ 480 525 23 22 Min 10 20 40 8 8 8 8 8 8 8 8 - Typ 50 - Max 20 60 6 Max 650 20 23 147 Unit HSD AC Characteristics Parameter VDD Power ON Slew Rate RSTB Pulse Width CLKIN cycle time CLKIN pulse duty VSD setup time VSD hold time HSD setup time HSD hold time Data set-up time Data hold time DE setup time DE hold time Output stable time Symbol TPOR TRST Tcph Tcwh Tvst Tvhd Thst Thhd Tdsu Tdhd Tesu Tehd Tsst Unit ms µs ns % ns ns ns ns ns ns ns ns µs Conditions From 0V to 90% VDD CLKIN = 45MHz D0R[7:0], D1G[7:0], D2B[7:0] to CLKIN D0R[7:0], D1G[7:0], D2B[7:0] to CLKIN 10%-90% target voltage CL = 120pf, R= 10kΩ Parallel 24-Bit RGB Mode TIming Parameter CLKIN Frequency CLKIN time CLKIN Pulse Duty Time from HSD to Source Output Time from HSD to LD Time from HSD to STV Time from HSD to CKV Time from HSD to OEV LD Pulse Width CKV Pulse Width OEV Pulse Width Symbol Fclk Tclk Tcwh Thso Thld Thstv Thckv Thoev Twld Twckv Twoev Min 20 40 - Typ 40 25 50 20 20 2 20 4 10 66 92 [6] Max 50 60 - Unit MHz Ns % CLKIN CLKIN CLKIN CLKIN CLKIN CLKIN CLKIN CLKIN Conditions VDD = 2.7V ~ 3.6V Tclk Vertical Input Timing Horizontal Input Timing [7] Input Clock and Data Timing Source Output Timing [8] Power ON/OFF Sequence Enter/Exit Standby Mode Sequence [9] Quality Information Test Item Content of Test High Temperature storage Endurance test applying the high storage temperature for a long time. Endurance test applying the low storage temperature for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. Endurance test applying vibration to simulate transportation and use. Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature / Humidity Operation Thermal Shock resistance Vibration test Static electricity test Test Condition Endurance test applying electric static discharge. 2 -30⁰C, 96 Hrs. 1,2 +70⁰C, 96 Hrs. 2 -20⁰C, 96 Hrs. 1,2 +50⁰C, 90% RH, 96 Hrs. 1,2 -20⁰C, 60min -> 70⁰C, 60min = 1 Cycle for 20 cycles 10-50Hz, 5G in each of 3 directions X, Y, Z For 30 minutes each direction Air: 8kV, 150pF, 330Ω, 5 times Contact: 4kV, 150pF, 330Ω, 5 times Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container. Precautions for using LCDs/LCMs See Precautions at www.newhavendisplay.com/specs/precautions.pdf Warranty Information and Terms & Conditions http://www.newhavendisplay.com/index.php?main_page=terms [10] Note +80⁰C, 96 Hrs. 3