NHD-5.7-320240WF-ETXI#-T

User’s Guide NHD-5.7-320240WFB-ETXI#-T LCM (Liquid Crystal Display Module) RoHS Compliant For product support, contact Newhaven Display International 2511 Technology Drive, #101 Elgin, IL 60124 Tel: (847) 844-8795 Fax: (847) 844-8796 November 10, 2008 RECORDS OF REVISION VERSION DATE 0 A 2008.04.01 2008.05.27 DOC. FIRST ISSUE REVISED PAGE NO. SUMMARY 8 First issue Modify pin2 and pin8 Contents 1. Module Classification Information 2. Block Diagram 3. Electrical Characteristics 4. Absolute Maximum Ratings 5. Interface Pin Function 6. Timing Characteristics 7. Optical Characteristics 8. Contour Drawing 9. LED driving conditions 10. Inspection specification 11. software (Register Initiate code) ร 3 ଄Δ٥ 22 ଄ 1.Module Classification Information   NHD 5.7-320240 WFB - E T X I   c d e f #T ghi j c Brand᧶NEWHAVEN DISPLAY INTERNATIONAL d Display Size: 5.7inch diagonal, 320xRGBx240 pixels e Display Type᧶WFB: TFT f Model serials number: E : with Epson Controller g Backlight Type᧶ NൺWithout backlight h LCD Mode᧶ i LCD Polarizer Type/ Temperature range/ View direction AൺLED, Amber BൺEL, Blue green RൺLED, Red DൺEL, Green OൺLED, Orange WൺEL, White GൺLED, Green FൺCCFL, White TൺLED, White YൺLED, Yellow Green SൺLED, Bright White BൺTN Positive, Gray TൺFSTN Negative NൺTN Negative, MൺSTN Negative, Blue GൺSTN Positive, Gray FൺFSTN Positive YൺSTN Positive, Yellow Green X: TFT, normally white AൺReflective, N.T, 6:00 HൺTransflective, W.T,6:00 DൺReflective, N.T, 12:00 KൺTransflective,W.T,12:00 GൺReflective, W. T, 6:00 CൺTransmissive, N.T,6:00 JൺReflective, W. T, 12:00 FൺTransmissive, N.T,12:00 BൺTransflective, N.T,6:00 IൺTransmissive, W. T, 6:00 EൺTransflective, N.T.12:00 LൺTransmissive, W.T,12:00 j Special Code # : RoHS Compliant T: With Touch Panel Newhaven Display International Page 4 of 22 NHD -5.7-320240WFB-ETXI#-T This product is composed of a TFT LCD panel, driver ICs, FPC, Control Board and a backlight unit. Item Dimension Unit 320 x RGBx240(TFT) dots 149.0x 109.0 x 11.5 (max) mm View area 115.200x 86.40 mm Dot pitch 0.12 x 0.36 mm Dot Matrix Module dimension Driving IC package COG LCD type TFT, Negative, Transmissive View direction 6 o’clock Backlight Type LED,Normally White Controller IC SID13A04 - 16 bit mode only *Expose the IC number blaze (Luminosity over than 1 cd) when using the LCM may cause IC operating failure. *Color tone slight changed by temperature and driving voltage. ร 5 ଄Δ٥ 22 ଄ 2.Block Diagram TFT ARRAY/CELL 320(R/G/B) X 240 6 bits data for R/G/B CLK Hs Vs S1D13A04 Power Circuit BackLight Vcom VGL Circuit VGH VCC(3.3V) GND Address Bus Data Bus 17 bit 16bit Contral signal Bit0 ~ Bit4 RED Bit5 ~ Bit10 GREEN Bit11~ Bit15 BLUE ร 6 ଄Δ٥ 22 ଄ 3.Electrical Characteristics Item Symbol Condition Min Typ Max Unit VCC Ё 3.0 3.3 3.6 V Input High Volt. VIH Ё 0.7 VCC Ё VCC V Input Low Volt. VIL Ё 0 Ё 0.3Vcc V Supply Voltage For Logic VGH *1 LCD Driving Supply Voltage Supply Current V 15 Ta=25к VGL*2 *3 -10 V VcomH 2.5 5.5 VcomL -2.0 0 IVDD VDD=3.3V Ё 5 8 mA 4.Absolute Maximum Ratings Item Symbol Min Typ Max Unit Operating Temperature TOP -20 Ё +70 к Storage Temperature TST -30 Ё +80 к VGH -0.3 Ё 18 V VGL -15 Ё 0.3 V VCC -0.3 Ё 6.0 V Power Supply Voltage ร 7 ଄Δ٥ 22 ଄ 5.Interface Pin Function 5-1 Pins Connection To Control Board ˣ˂ˡʳ ˦̌̀˵̂˿ʳ ˙̈́˶̇˼̂́ʳ ˄ʳ ˩˶˶ʳ ˣ̂̊˸̅ʳ˦̈̃̃˿̌ʳˍʳʾˆˁˆ˩ʳ ˅ʳ ˩˶˶ʳ ˣ̂̊˸̅ʳ˦̈̃̃˿̌ʳˍʳʾˆˁˆ˩ʳ ˆʳ ˇʳ ˈʳ ˉʳ ˊʳ ˋʳ ˌʳ ˄˃ʳ ˄˄ʳ ˄˅ʳ ˄ˆʳ ˄ˇʳ ˄ˈʳ ˄ˉʳ ˄ˊʳ ˄ˋʳ ˄ˌʳ ˅˃ʳ ˅˄ʳ ˅˅ʳ ˅ˆʳ ˗˕˃ʳ ˗˕˄ʳ ˗˕˅ʳ ˗˕ˆʳ ˗˕ˇʳ ˗˕ˈʳ ˗˕ˉʳ ˗˕ˊʳ ˗˕ˋʳ ˗˕ˌʳ ˗˕˄˃ʳ ˗˕˄˄ʳ ˗˕˄˅ʳ ˗˕˄ˆʳ ˗˕˄ˇʳ ˗˕˄ˈʳ ˖˦ʳ ˠ˥ʳ ˥˗ʳ ˪˥ʳ ˕˛˘ʳ ʳ ˅ˇʳ ˥˘˦˧ʳ ˅ˈʳ ˪˔˜˧ʳ ˣ˂ˡʳ ˦̌̀˵̂˿ ˙̈́˶̇˼̂́ʳ ˅ˉʳ VCC ˣ̂̊˸̅ʳ˦̈̃̃˿̌ʳˍʳʾˆˁˆ˩ʳ Typically used as input clock ˅ˊʳ ˖˟˞ʳ source for pixel clock . Normally this pin can be floated ˅ˋʳ ˚ˡ˗ʳ ˚̅̂̈́˷ʳ˹̂̅ʳ˿̂˺˼˶ʳ˶˼̅˶̈˼̇ʳ ˅ˌʳ ˚ˡ˗ʳ ˚̅̂̈́˷ʳ˹̂̅ʳ˿̂˺˼˶ʳ˶˼̅˶̈˼̇ʳ ˆ˃ʳ ˚ˡ˗ʳ ˚̅̂̈́˷ʳ˹̂̅ʳ˿̂˺˼˶ʳ˶˼̅˶̈˼̇ʳ ˆ˄ʳ ˔˗˄ʳ ˦̌̆̇˸̀ʳ˴˷˷̅˸̆̆ʳ˵̈̆ʳ˵˼̇̆ʳ ˆ˅ʳ ˚ˡ˗ʳ ˚̅̂̈́˷ʳ˹̂̅ʳ˿̂˺˼˶ʳ˶˼̅˶̈˼̇ʳ ˆˆʳ ˔˗˅ʳ ˦̌̆̇˸̀ʳ˴˷˷̅˸̆̆ʳ˵̈̆ʳ˵˼̇̆ʳ ˆˇʳ ˚ˡ˗ʳ ˚̅̂̈́˷ʳ˹̂̅ʳ˿̂˺˼˶ʳ˶˼̅˶̈˼̇ʳ ˦̌̆̇˸̀ʳ˴˷˷̅˸̆̆ʳ˵̈̆ʳ˵˼̇̆ʳ ˜́̃̈̇ʳ ˷˴̇˴ʳ ˹̅̂̀ʳ ̇˻˸ʳ ̆̌̆̇˸̀ʳ ˷˴̇˴ʳ ˆˈʳ ˔˗ˆʳ ˵̈̆ˁʳ ˆˉʳ ˚ˡ˗ʳ ˚̅̂̈́˷ʳ˹̂̅ʳ˿̂˺˼˶ʳ˶˼̅˶̈˼̇ʳ ˆˊʳ ˔˗ˇʳ ˆˋʳ ˔˗ˈʳ ˆˌʳ ˔˗ˉʳ ˇ˃ʳ ˔˗ˊʳ ˇ˄ʳ ˔˗ˋʳ ˇ˅ʳ ˔˗ˌʳ ˇˆʳ ˔˗˄˃ʳ ˖˻˼̃ʳ̆˸˿˸˶̇ʳ˼́̃̈̇ˁʳ ˇˇʳ ˔˗˄˄ʳ ˦˸˸ʳˡ̂̇˸ʻ˄ʼʳ ˇˈʳ ˔˗˄˅ʳ ˦̌̆̇˸̀ʳ˴˷˷̅˸̆̆ʳ˵̈̆ʳ˵˼̇̆ʳ ̇˻˼̆ʳ̃˼́ʳ˼́̃̈̇̆ʳ̇˻˸ʳ̅˸˴˷ʳ˶̂̀̀˴́˷ ˇˉʳ ˔˗˄ˆʳ ̊̅˼̇˸ʳ˸́˴˵˿˸ʳ̆˼˺́˴˿ʳ ˇˊʳ ˔˗˄ˇʳ ˧˻˼̆ʳ̃˼́ʳ˼́̃̈̇̆ʳ̇˻˸ʳ˵̌̇˸ʳ˸́˴˵˿˸ʳ ˇˋʳ ˔˗˄ˈʳ ̆˼˺́˴˿ʳ˹̂̅ʳ̇˻˸ʳ˻˼˺˻ʳ˷˴̇˴ʳ˵̌̇˸ʳ ʳ ʽˡ̂̇˸ʳʻ˅ʼʳ ˔˶̇˼̉˸ʳ˿̂̊ʳ˼́̃̈̇ʳ̇̂ʳ̆˸̇ʳ˴˿˿ʳ˼́̇˸̅́˴˿ʳ ˇˌʳ ˔˗˄ˉʳ ̅˸˺˼̆̇˸̅̆ʳ̇̂ʳ̇˻˸ʳ˷˸˹˴̈˿̇ʳ̆̇˴̇˸ʳ ˧˻˼̆ʳ̃˼́ʳ̂̈̇̃̈̇̆ʳ̇˻˸ʳ̊˴˼̇ʳ̆˼˺́˴˿ʳ ˈ˃ʳ ˔˗˄ˊʳ ˡ̂̇˸ʻ˄ʼˍ ŎİœĤġŪŴġŴŦŵġũŪŨũġŵŰġŢŤŤŦŴŴġťŪŴűŭŢźġţŶŧŧŦųĭġŭŰŸġŵŰġŢŤŤŦŴŴġŵũŦġųŦŨŪŴŵŦųŴį ġ ŏŰŵŦĩijĪĻġġŃʼnņġŴũŰŶŭťġţŦġŴŦŵġũŪŨũĭġŵũŪŴġťŪŴűŭŢźġŴŶűűŰųŵŴġōŪŵŵŭŦġņůťŪŢůġIJķĮţŪŵġŮŰťŦġŰůŭźįʳ ร 8 ଄Δ٥ 22 ଄ 6.Timing Characteristics 7.2/Joufsgbdf!Ujnjoh! ร 9 ଄Δ٥ 22 ଄ 7.Optical Characteristics ร 10 ଄Δ٥ 22 ଄ 7.1 Definition of optical characteristics ร 11 ଄Δ٥ 22 ଄ ร 12 ଄Δ٥ 22 ଄ 8.Contour Drawing 149.0±0.5 152.0±0.2 4.0 37.3 138.7±0.5 118.28±0.2(VA)(Frame) 4-1 PTH (320*3)*240 Dots 94.4 7.3 86.40±0.2(AA) 115.20±0.2(AA) 15.3 44.4 6.2 101.0±0.2 88.6±0.2(VA)(Frame) 6.3 CON2 Vcc Vcc DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 DB8 DB9 DB10 DB11 DB12 DB13 DB14 18 DB15 CS 19 20 MR 21 RD 22 WR 23 BHE 24 REST 25 WAIT 26 VCC 27 CLK 28 GND 29 GND 30 GND 31 AD1 32 GND 33 AD2 34 GND AD3 GND AD4 AD5 AD6 AD7 AD8 AD9 AD10 AD11 AD12 AD13 AD14 AD15 AD16 AD17 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 200.0±10.0 3 9.43 1 CON2 1.0 11.5Max 7.0±0.5 The non-specified tolerance of dimension is 0.36 0.12 DOT SIZE SCALE 40/1 (38.9) 1 2 3 0.2mm. A NC K 78.0(PCB) (22.4) 55.7 1 50 50.0 CON1 70.0(PCB) 109.0±0.5 4.0 13.76 7.4 7.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 CON2 ሿٙ૿ The non-specified tolerance of dimension is ร 13 ଄Δ٥ 22 ଄ 0.2mm. 9. LED driving conditions Parameter Symbol Min. Typ. Max. Unit LED Current ILED ---- 140 210 mA LED voltage VLED 9.0 ---- 10.5 V - (10,000) ---- ---- - IV 210.2 262.8 ---- CD/M2 LED life Time Luminous Intensity Note 1: There are 7 Groups LED shown as below, =9.9 V(Min) Note 4: The luminous is measured through LCD panel. ร 14 ଄Δ٥ 22 ଄ Remark Note1 Note 2,3 Note 4 10. Inspection specification NO 01 02 03 04 Item Criterion AQL Electrical Testing 1.1 Missing vertical, horizontal segment, segment contrast defect. 1.2 Missing character , dot or icon. 1.3 Display malfunction. 1.4 No function or no display. 1.5 Current consumption exceeds product specifications. 1.6 LCD viewing angle defect. 1.7 Mixed product types. 1.8 Contrast defect. 0.65 Black or white 2.1 White and black spots on display Љ0.25mm, no more than spots on LCD three white or black spots present. (display only) 2.2 Densely spaced: No more than two spots or lines within 3mm 2.5 3.1 Round type : As following drawing ӥːʻʳ̋ʳʾʳ̌ʳʼʳ˂ʳ˅ʳ ʳ ʳ ʳ ˦˜˭˘ʳ ˔˶˶˸̃̇˴˵˿˸ʳˤʳ˧ˬ ʳ ʳ ʳ ʳ ʳ ӥЉ˃ˁ˄˃ ˔˶˶˸̃̇ʳ́̂ʳ˷˸́̆˸ ˃ˁ˄˃ІӥЉ˃ˁ˅˃ ˅ʳ ˃ˁ˅˃ІӥЉ˃ˁ˅ˈ ˄ʳ ˃ˁ˅ˈІӥʳ ˃ʳ ʳ 2.5 LCD black spots, white spots, contamination 3.2 Line type : (As following drawing) (non-display) Length Width --WЉ˃ˁ˃˅ LЉˆˁ˃ 0.02ІWЉ˃ˁ˃ˆ LЉ˅ˁˈ 0.03ІWЉ˃ˁ˃ˈʳ --0.05ІW Polarizer bubbles If bubbles are visible, judge using black spot specifications, not easy to find, must check in specify direction. Size ӥ ӥЉ˃ˁ˅˃ ˃ˁ˅˃ІӥЉ˃ˁˈ˃ ˃ˁˈ˃ІӥЉ˄ˁ˃˃ ˄ˁ˃˃Іӥ Total Q TY ร 15 ଄Δ٥ 22 ଄ Acceptable Q TY Accept no dense 2.5 2 As round type Acceptable Q TY Accept no dense 3 2 0 3 2.5 NO 05 Item Scratches Criterion Follow NO.3 LCD black spots, white spots, contamination Symbols Define: x: Chip length y: Chip width z: Chip thickness k: Seal width t: Glass thickness a: LCD side length L: Electrode pad length: AQL 6.1 General glass chip : 6.1.1 Chip on panel surface and crack between panels: 06 Chipped glass ̍ˍʳ˖˻˼̃ʳ̇˻˼˶˾́˸̆̆ʳ ̌ˍʳ˖˻˼̃ʳ̊˼˷̇˻ʳ ̋ˍʳ˖˻˼̃ʳ˿˸́˺̇˻ʳ ˭Љ˄˂˅̇ʳ ˡ̂̇ʳ̂̉˸̅ʳ̉˼˸̊˼́˺ʳ˴̅˸˴ ̋Љ˄˂ˋ˴ʳ ˄˂˅̇І̍Љ˅̇ʳ ˡ̂̇ʳ˸̋˶˸˸˷ʳ˄˂ˆ˾ʳ ʳ ̋Љ˄˂ˋ˴ʳ Ф˜˹ʳ̇˻˸̅˸ʳ˴̅˸ʳ˅ʳ̂̅ʳ̀̂̅˸ʳ˶˻˼̃̆ʿʳ̋ʳ˼̆ʳ̇̂̇˴˿ʳ˿˸́˺̇˻ʳ̂˹ʳ˸˴˶˻ʳ˶˻˼̃ˁʳ ʳ ˉˁ˄ˁ˅ʳ˖̂̅́˸̅ʳ˶̅˴˶˾ˍʳ ʳ ʳ ̍ˍʳ˖˻˼̃ʳ̇˻˼˶˾́˸̆̆ʳ ̌ˍʳ˖˻˼̃ʳ̊˼˷̇˻ʳ ̋ˍʳ˖˻˼̃ʳ˿˸́˺̇˻ʳ ˭Љ˄˂˅̇ʳ ˡ̂̇ʳ̂̉˸̅ʳ̉˼˸̊˼́˺ʳ˴̅˸˴ ̋Љ˄˂ˋ˴ʳ ˄˂˅̇І̍Љ˅̇ʳ ˡ̂̇ʳ˸̋˶˸˸˷ʳ˄˂ˆ˾ʳ ʳ ̋Љ˄˂ˋ˴ʳ Ф˜˹ʳ̇˻˸̅˸ʳ˴̅˸ʳ˅ʳ̂̅ʳ̀̂̅˸ʳ˶˻˼̃̆ʿʳ̋ʳ˼̆ʳ̇˻˸ʳ̇̂̇˴˿ʳ˿˸́˺̇˻ʳ̂˹ʳ˸˴˶˻ʳ˶˻˼̃ˁʳ ʳ ร 16 ଄Δ٥ 22 ଄ 2.5 NO Item Criterion AQL ˦̌̀˵̂˿̆ʳˍʳ x: Chip length y: Chip width z: Chip thickness k: Seal width t: Glass thickness a: LCD side length L: Electrode pad length 6.2 Protrusion over terminal : 6.2.1 Chip on electrode pad : ̌ˍʳ˖˻˼̃ʳ̊˼˷̇˻ʳ ʳ ̋ˍʳ˖˻˼̃ʳ˿˸́˺̇˻ʳ ̌Љ˃ˁˈ̀̀ʳ ̋Љ˄˂ˋ˴ʳ ˉˁ˅ˁ˅ʳˡ̂́ˀ˶̂́˷̈˶̇˼̉˸ʳ̃̂̅̇˼̂́ˍʳ 06 ̍ˍʳ˖˻˼̃ʳ̇˻˼˶˾́˸̆̆ʳ ˃ʳ Іʳ ̍ʳЉʳ̇ʳ Glass crack 2.5 ̌ˍʳ˖˻˼̃ʳ̊˼˷̇˻ʳ ʳ ̋ˍʳ˖˻˼̃ʳ˿˸́˺̇˻ʳ ̍ˍʳ˖˻˼̃ʳ̇˻˼˶˾́˸̆̆ʳ ̌Љʳ˟ʳ ̋Љ˄˂ˋ˴ʳ ˃ʳ Іʳ ̍ʳЉʳ̇ʳ Ф˜˹ʳ̇˻˸ʳ˶˻˼̃̃˸˷ʳ˴̅˸˴ʳ̇̂̈˶˻˸̆ʳ̇˻˸ʳ˜˧ˢʳ̇˸̅̀˼́˴˿ʿʳ̂̉˸̅ʳ˅˂ˆʳ̂˹ʳ̇˻˸ʳ˜˧ˢʳ̀̈̆̇ʳ ̅˸̀˴˼́ʳ˴́˷ʳ˵˸ʳ˼́̆̃˸˶̇˸˷ʳ˴˶˶̂̅˷˼́˺ʳ̇̂ʳ˸˿˸˶̇̅̂˷˸ʳ̇˸̅̀˼́˴˿ʳ̆̃˸˶˼˹˼˶˴̇˼̂́̆ˁʳ Ф˜˹ʳ̇˻˸ʳ̃̅̂˷̈˶̇ʳ̊˼˿˿ʳ˵˸ʳ˻˸˴̇ʳ̆˸˴˿˸˷ʳ˵̌ʳ̇˻˸ʳ˶̈̆̇̂̀˸̅ʿʳ̇˻˸ʳ˴˿˼˺́̀˸́̇ʳ̀˴̅˾ʳ ́̂̇ʳ˵˸ʳ˷˴̀˴˺˸˷ˁʳ ˉˁ˅ˁˆʳ˦̈˵̆̇̅˴̇˸ʳ̃̅̂̇̈˵˸̅˴́˶˸ʳ˴́˷ʳ˼́̇˸̅́˴˿ʳ˶̅˴˶˾ˁʳ ̌ˍʳ̊˼˷̇˻ʳ ʳ ̌Љ˄˂ˆ˟ʳ ʳ ʳ ร 17 ଄Δ٥ 22 ଄ ̋ˍʳ˿˸́˺̇˻ʳ ̋ʳЉʳ˴ʳ NO Item 07 Cracked glass 08 09 10 11 Backlight elements Bezel PCBΕCOB Soldering Criterion ˧˻˸ʳ˟˖˗ʳ̊˼̇˻ʳ˸̋̇˸́̆˼̉˸ʳ˶̅˴˶˾ʳ˼̆ʳ́̂̇ʳ˴˶˶˸̃̇˴˵˿˸ˁʳ ʳ ˋˁ˄ʳ˜˿˿̈̀˼́˴̇˼̂́ʳ̆̂̈̅˶˸ʳ˹˿˼˶˾˸̅̆ʳ̊˻˸́ʳ˿˼̇ˁʳ ˋˁ˅ʳ˦̃̂̇̆ʳ̂̅ʳ̆˶̅˴̇˶˻˸˷ʳ̇˻˴̇ʳ˴̃̃˸˴̅ʳ̊˻˸́ʳ˿˼̇ʳ̀̈̆̇ʳ˵˸ʳ˽̈˷˺˸˷ˁʳ˨̆˼́˺ʳ ˟˖˗ʳ̆̃̂̇ʿʳ˿˼́˸̆ʳ˴́˷ʳ˶̂́̇˴̀˼́˴̇˼̂́ʳ̆̇˴́˷˴̅˷̆ˁʳ ˋˁˆʳ˕˴˶˾˿˼˺˻̇ʳ˷̂˸̆́ϗ̇ʳ˿˼˺˻̇ʳ̂̅ʳ˶̂˿̂̅ʳ̊̅̂́˺ˁʳ ʳ ʳ ˌˁ˄ʳ˕˸̍˸˿ʳ̀˴̌ʳ́̂̇ʳ˻˴̉˸ʳ̅̈̆̇ʿʳ˵˸ʳ˷˸˹̂̅̀˸˷ʳ̂̅ʳ˻˴̉˸ʳ˹˼́˺˸̅̃̅˼́̇̆ʿʳ̆̇˴˼́̆ʳ ̂̅ʳ̂̇˻˸̅ʳ˶̂́̇˴̀˼́˴̇˼̂́ˁʳ ˌˁ˅ʳ˕˸̍˸˿ʳ̀̈̆̇ʳ˶̂̀̃˿̌ʳ̊˼̇˻ʳ˽̂˵ʳ̆̃˸˶˼˹˼˶˴̇˼̂́̆ˁʳ ʳ ʳ ˄˃ˁ˄ʳ˖ˢ˕ʳ̆˸˴˿ʳ̀˴̌ʳ́̂̇ʳ˻˴̉˸ʳ̃˼́˻̂˿˸̆ʳ˿˴̅˺˸̅ʳ̇˻˴́ʳ˃ˁ˅̀̀ʳ̂̅ʳ ˶̂́̇˴̀˼́˴̇˼̂́ˁʳ ˄˃ˁ˅ʳ˖ˢ˕ʳ̆˸˴˿ʳ̆̈̅˹˴˶˸ʳ̀˴̌ʳ́̂̇ʳ˻˴̉˸ʳ̃˼́˻̂˿˸̆ʳ̇˻̅̂̈˺˻ʳ̇̂ʳ̇˻˸ʳ˜˖ˁʳ ˄˃ˁˆʳThe height of the COB should not exceed the height indicated in the assembly diagram. 10.4 There may not be more than 2mm of sealant outside the seal area on the PCB. And there should be no more than three places. 10.5 No oxidation or contamination PCB terminals. 10.6 Parts on PCB must be the same as on the production characteristic chart. There should be no wrong parts, missing parts or excess parts. 10.7 The jumper on the PCB should conform to the product characteristic chart. 10.8 If solder gets on bezel tab pads, LED pad, zebra pad or screw hold pad, make sure it is smoothed down. ʳ ʳ ˄˄ˁ˄ʳˡ̂ʳ̈́ˀ̀˸˿̇˸˷ʳ̆̂˿˷˸̅ʳ̃˴̆̇˸ʳ̀˴̌ʳ˵˸ʳ̃̅˸̆˸́̇ʳ̂́ʳ̇˻˸ʳˣ˖˕ˁʳ ˄˄ˁ˅ʳˡ̂ʳ˶̂˿˷ʳ̆̂˿˷˸̅ʳ˽̂˼́̇̆ʿʳ̀˼̆̆˼́˺ʳ̆̂˿˷˸̅ʳ˶̂́́˸˶̇˼̂́̆ʿʳ̂̋˼˷˴̇˼̂́ʳ̂̅ʳ ˼˶˼˶˿˸ˁʳ ˄˄ˁˆʳˡ̂ʳ̅˸̆˼˷̈˸ʳ̂̅ʳ̆̂˿˷˸̅ʳ˵˴˿˿̆ʳ̂́ʳˣ˖˕ˁʳ ˄˄ˁˇʳˡ̂ʳ̆˻̂̅̇ʳ˶˼̅˶̈˼̇̆ʳ˼́ʳ˶̂̀̃̂́˸́̇̆ʳ̂́ʳˣ˖˕ˁʳ ʳ ร 18 ଄Δ٥ 22 ଄ AQL 2.5 0.65 2.5 0.65 2.5 0.65 2.5 2.5 0.65 2.5 2.5 0.65 0.65 2.5 2.5 2.5 2.5 0.65 NO 12 Item General appearance Criterion ʳ ˄˅ˁ˄ʳˡ̂ʳ̂̋˼˷˴̇˼̂́ʿʳ˶̂́̇˴̀˼́˴̇˼̂́ʿʳ˶̈̅̉˸̆ʳ̂̅ʿʳ˵˸́˷̆ʳ̂́ʳ˼́̇˸̅˹˴˶˸ʳˣ˼́ʳ ʻˢ˟˕ʼʳ̂˹ʳ˧˖ˣˁʳ ˄˅ˁ˅ʳˡ̂ʳ˶̅˴˶˾̆ʳ̂́ʳ˼́̇˸̅˹˴˶˸ʳ̃˼́ʳʻˢ˟˕ʼʳ̂˹ʳ˧˖ˣˁʳ ˄˅ˁˆʳˡ̂ʳ˶̂́̇˴̀˼́˴̇˼̂́ʿʳ̆̂˿˷˸̅ʳ̅˸̆˼˷̈˸ʳ̂̅ʳ̆̂˿˷˸̅ʳ˵˴˿˿̆ʳ̂́ʳ̃̅̂˷̈˶̇ˁʳ ˄˅ˁˇʳ˧˻˸ʳ˜˖ʳ̂́ʳ̇˻˸ʳ˧˖ˣʳ̀˴̌ʳ́̂̇ʳ˵˸ʳ˷˴̀˴˺˸˷ʿʳ˶˼̅˶̈˼̇̆ˁʳ ˄˅ˁˈʳ˧˻˸ʳ̈̃̃˸̅̀̂̆̇ʳ˸˷˺˸ʳ̂˹ʳ̇˻˸ʳ̃̅̂̇˸˶̇˼̉˸ʳ̆̇̅˼̃ʳ̂́ʳ̇˻˸ʳ˼́̇˸̅˹˴˶˸ʳ̃˼́ʳ ̀̈̆̇ʳ˵˸ʳ̃̅˸̆˸́̇ʳ̂̅ʳ˿̂̂˾ʳ˴̆ʳ˼˹ʳ˼̇ʳ˶˴̈̆˸ʳ̇˻˸ʳ˼́̇˸̅˹˴˶˸ʳ̃˼́ʳ̇̂ʳ̆˸̉˸̅ˁʳ ˄˅ˁˉʳ˧˻˸ʳ̅˸̆˼˷̈˴˿ʳ̅̂̆˼́ʳ̂̅ʳ̇˼́ʳ̂˼˿ʳ̂˹ʳ̆̂˿˷˸̅˼́˺ʳʻ˶̂̀̃̂́˸́̇ʳ̂̅ʳ˶˻˼̃ʳ ˶̂̀̃̂́˸́̇ʼʳ˼̆ʳ́̂̇ʳ˵̈̅́˸˷ʳ˼́̇̂ʳ˵̅̂̊́ʳ̂̅ʳ˵˿˴˶˾ʳ˶̂˿̂̅ˁʳ ˄˅ˁˊʳ˦˸˴˿˴́̇ʳ̂́ʳ̇̂̃ʳ̂˹ʳ̇˻˸ʳ˜˧ˢʳ˶˼̅˶̈˼̇ʳ˻˴̆ʳ́̂̇ʳ˻˴̅˷˸́˸˷ˁʳ ˄˅ˁˋʳˣ˼́ʳ̇̌̃˸ʳ̀̈̆̇ʳ̀˴̇˶˻ʳ̇̌̃˸ʳ˼́ʳ̆̃˸˶˼˹˼˶˴̇˼̂́ʳ̆˻˸˸̇ˁʳ ˄˅ˁˌʳ˟˖˗ʳ̃˼́ʳ˿̂̂̆˸ʳ̂̅ʳ̀˼̆̆˼́˺ʳ̃˼́̆ˁʳ ˄˅ˁ˄˃ʳˣ̅̂˷̈˶̇ʳ̃˴˶˾˴˺˼́˺ʳ̀̈̆̇ʳ̇˻˸ʳ̆˴̀˸ʳ˴̆ʳ̆̃˸˶˼˹˼˸˷ʳ̂́ʳ̃˴˶˾˴˺˼́˺ʳ ̆̃˸˶˼˹˼˶˴̇˼̂́ʳ̆˻˸˸̇ˁʳ ˄˅ˁ˄˄ʳˣ̅̂˷̈˶̇ʳ˷˼̀˸́̆˼̂́ʳ˴́˷ʳ̆̇̅̈˶̇̈̅˸ʳ̀̈̆̇ʳ˶̂́˹̂̅̀ʳ̇̂ʳ̃̅̂˷̈˶̇ʳ ̆̃˸˶˼˹˼˶˴̇˼̂́ʳ̆˻˸˸̇ˁʳ ʳ ร 19 ଄Δ٥ 22 ଄ AQL 2.5 0.65 2.5 2.5 2.5 2.5 2.5 0.65 0.65 0.65 0.65 11. software (Register Initiate code) { \ { 0x14, 0x00000000 }, /* Power Save Configuration Register */ \ { 0x64, 0x28D70000 }, /* GPIO Status and Control Register */ \ { 0x04, 0x00000000 }, /* Memory Clock Configuration Register */ \ { 0x08, 0x00000032 }, /* Pixel Clock Configuration Register { 0x0C, 0x00000061 }, /* Panel Type and MOD Rate Register { 0x10, 0x00000010 }, /* Display Settings Register */ \ { 0x20, 0x00000030 }, /* Horizontal Total Register */ \ { 0x24, 0x00000027 }, /* Horizontal Display Period Register */ \ { 0x28, 0x0000000F }, /* Horizontal Display Period Start Position Register */ \ { 0x2C, 0x00870156 }, /* FPLINE Register { 0x30, 0x00000103 }, /* Vertical Total Register { 0x34, 0x000000EF }, /* Vertical Display Period Register { 0x38, 0x00000013 }, /* Vertical Display Period Start Position Register { 0x3C, 0x00800000 }, /* FPFRAME Register { 0x40, 0x00000000 }, /* Main Window Display Start Address Register { 0x44, 0x000000A0 }, /* Main Window Line Address Offset Register { 0x50, 0x00000000 }, /* PIP+ Window Display Start Address Register { 0x54, 0x000000A0 }, /* PIP+ Window Line Address Offset Register { 0x58, 0x00000000 }, /* PIP+ Window X Positions Register */ \ { 0x5C, 0x00000000 }, /* PIP+ Window Y Positions Register */ \ { 0x60, 0x00000000 }, /* Special Purpose Register */ \ { 0x70, 0x00000000 }, /* PWM Clock Configuration Register { 0x74, 0x00000000 }, /* PWMOUT Duty Cycle Register { 0x80, 0x00000000 }, /* Scratch Pad A Register */ \ { 0x84, 0x00000000 }, /* Scratch Pad B Register */ \ { 0x88, 0x00000000 }, /* Scratch Pad C Register */ \ { S1D_REGDELAYON, 0x00000032 }, */ \ */ \ */ \ */ \ */ \ */ \ */ \ */ \ */ \ */ \ */ \ */ \ */ \ /* LCD Panel Power On Delay (in ms) */ \ { 0x64, 0x28D70001 }, /* GPIO Status and Control Register */ \ { 0x14, 0x00000000 } /* Power Save Configuration Register */ \ } ร 20 ଄Δ٥ 22 ଄ Newhaven LCM Sample Estimate Feedback Sheet Module NumberΚ Page: 1 1ΕPanel SpecificationΚ 1. Panel TypeΚ ϭ Pass ϭ NG , 2. View DirectionΚ ϭ Pass ϭ NG , 3. Numbers of DotsΚ ϭ Pass ϭ NG , 4. View AreaΚ ϭ Pass ϭ NG , 5. Active AreaΚ ϭ Pass ϭ NG , 6. Operating TemperatureΚ ϭ Pass ϭ NG , 7. Storage TemperatureΚ ϭ Pass ϭ NG , 1. PCB SizeΚ ϭ Pass ϭ NG , 2. Frame SizeΚ ϭ Pass ϭ NG , 3. Material of FrameΚ ϭ Pass ϭ NG , 4. Connector PositionΚ ϭ Pass ϭ NG , 5. Fix Hole PositionΚ ϭ Pass ϭ NG , 6. Backlight PositionΚ ϭ Pass ϭ NG , 7. Thickness of PCBΚ ϭ Pass ϭ NG , 8. Height of Frame to PCBΚ ϭ Pass ϭ NG , 9. Height of ModuleΚ ϭ Pass ϭ NG , 10. OthersΚ ϭ Pass ϭ NG , 1. Pitch of ConnectorΚ ϭ Pass ϭ NG , 2. Hole size of ConnectorΚ ϭ Pass ϭ NG , 3. Mounting Hole sizeΚ ϭ Pass ϭ NG , 4. Mounting Hole TypeΚ ϭ Pass ϭ NG , 5. OthersΚ ϭ Pass ϭ NG , 1. B/L TypeΚ ϭ Pass ϭ NG , 2. B/L ColorΚ ϭ Pass ϭ NG , 8. OthersΚ 2ΕMechanical SpecificationΚ 3ΕRelative Hole SizeΚ 4ΕBacklight SpecificationΚ 3. B/L Driving Voltage (Reference for LED Type)Κ ϭ Pass 4. B/L Driving CurrentΚ ϭ Pass ϭ NG , 5. Brightness of B/LΚ ϭ Pass ϭ NG , 6. B/L Solder MethodΚ ϭ Pass ϭ NG , 7. OthersΚ ϭ Pass ϭ NG , ЇЇ Go to page 2 ІІ ร 21 ଄Δ٥ 22 ଄ ϭ NG , Newhaven Module NumberΚ Page: 2 5ΕElectronic Characteristics of ModuleΚ 1. Input VoltageΚ ϭ Pass ϭ NG , 2. Supply CurrentΚ ϭ Pass ϭ NG , 3. Driving Voltage for LCDΚ ϭ Pass ϭ NG , 4. Contrast for LCDΚ ϭ Pass ϭ NG , 5. B/L Driving MethodΚ ϭ Pass ϭ NG , 6. Negative Voltage OutputΚ ϭ Pass ϭ NG , 7. Interface FunctionΚ ϭ Pass ϭ NG , 8. LCD UniformityΚ ϭ Pass ϭ NG , 9. ESD testΚ ϭ Pass ϭ NG , ϭ Pass ϭ NG , 10. OthersΚ 6ΕSummaryΚ Sales signatureΚ Customer SignatureΚ DateΚ ร 22 ଄Δ٥ 22 ଄ / / User’s Guide TS320240BRNO Touch Panel For product support, contact Newhaven Display International 2511 Technology Drive, #101 Elgin, IL 60124 Tel: (847) 844-8795 Fax: (847) 844-8796 November 5, 2007 1 12. Touch panel Information: TS-320240BRNO 2 ELECTRICAL SPECIFICATIONS: ITEM SPECIFICATION TS-320240BRNO CONDITION 350Ω ~ 1000Ω DIRECTION: X 200Ω ~ 650Ω DIRECTION: Y INSULATION MORE THAN DC 25V RESISTANCE 20MΩ CHATTERING LESS THAN TIME 15 msec ON RESISTANCE 100K PULL-UP LINEARITY ±1.5% X AXIS ±1.5% Y AXIS MACHINE SPECIFICATIONS ITEM OPERATING SPECIFICATION LESS THAN 80g FORCE CONDITION R8.0 HS 40 ° SILICON RUBBER OR R0.8 POLYACETAL PEN SURFACE MORE THAN 2H PENCIL TEST LIGHT MORE THAN @550nm TRANSMISSION 80 % HITACHI U3300 DURABILITY FOR MORE THAN FORCE: 250g PEN SELECTIONS 1,200,000 TIMES SPEED: 2cm/sec HARDNESS