NHD-5.7-320240WFB-ETXI#-1

NHD-5.7-320240WFB-ETXI#-1 TFT (Thin-Film-Transistor) Color Liquid Crystal Display Module NHD5.7320240WFBETXI#-1 Newhaven Display 5.7” Diagonal 320xRGBx240 Pixels Model Built-in Driver + 16-Bit Controller White LED Backlight TFT 12:00 Optimal View, Wide Temp. RoHS Compliant Newhaven Display International, Inc. 2661 Galvin Ct. Elgin IL, 60124 Ph: 847-844-8795 Fax: 847-844-8796 www.newhavendisplay.com nhtech@newhavendisplay.com nhsales@newhavendisplay.com Document Revision History Revision 0 1 2 3 4 5 6 7 8 9 Date 7/8/2009 7/29/2009 11/4/2009 3/19/2010 5/24/2011 1/6/2012 1/9/17 2/21/17 4/19/17 2/4/20 Description Initial Release MECHANICAL DRAWING UPDATE Quality Information Update Pin description updated Electrical characteristics updated Pixel data format updated Mech. Drawing, Electrical and Optical Characteristics Updated Mechanical Drawing and Electrical Characteristics Updated Mechanical Drawing and Optical Characteristics Updated Mechanical Drawing & Backlight Current Updated Functions and Features • • • • 320xRGBx240 resolution LED backlight 16-bit parallel interface SSD1963 Controller [2] Changed by CL CL BE BE AK AK TM TM TM SB 1 2 3 4 5 6 7 SYMBOL 8 REVISION DATE A A 12.40 Max 7.00±0.5 4-O3.5 PTH (38.95) 78.00±0.5(PCB) 37.15 (31.72) 70.00±0.5(PCB) 1 94.40 109.00±0.5 101.00 88.64 VA 86.40 AA CN-FPC-50P/P0.5 Top Contact 320*RGB*240 CN-FPC-32P/P0.5 Bottom Contact C K(WHITE) (11.9) 200±10.0 32 K(WHITE) A(RED) A(RED) 1.00Max JST XH-3 (5.0) Tape (10*33mm) Label E F Notes: 1. Voltage: 2. Backlight: 3. Display Type: 4. Display Mode: 5. Driver IC: 6. Interface: 7. Op�mal View: 8. Luminance: 1 NEWHAVEN DISPLAY NHD-5.7-320240WFB-ETXI#-1 DATE CODE Made in China 3.3V VDD 140mA @ 9.9V, White LED 5.7” TFT, 320x240 Pixels Transmissive, Normally White SSD1963 8-bit Parallel MCU 12:00 500 cd/m² (Typical) 2 3 Backlight Circuit DB2 DB3 DB4 DB5 A B C DB6 DB7 DB8 DB9 DB10 DB11 DB12 DB13 DB14 DB15 NC NC 20 21 22 23 24 25 26 27 28 29 30 31 32 1.00 D (5.0) GND VDD NC D/C WR RD DB0 DB1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 (22.40) 13.76 15.30 7.30 B 4.00 10.18 7.30 4.00 7.00 160.00±0.5 149.00±0.5 152.00 138.60 118.28 VA 115.20 AA D CS RST RL UD NC NC E NC NC STANDARD TOLERANCE: (UNLESS OTHERWISE SPECIFIED) LINEAR: ±0.3mm K 5 6 1.0 NHD-5.7-320240WFB-ETXI#-1 UNLESS OTHERWISE SPECIFIED: DRAWN BY: - DIMENSIONS ARE IN MILLIMETERS DRAWN DATE: - THIRD ANGLE PROJECTION 4 REVISION: DRAWING/PART NUMBER: S. Baxi 2/4/20 APPROVED BY: SIZE: A3 S. Baxi SCALE: APPROVED DATE: DO NOT SCALE DRAWING NS 2/4/20 SHEET 1 OF 1 THIS DRAWING IS SOLELY THE PROPERTY OF NEWHAVEN DISPLAY INTERNATIONAL, INC. THE INFORMATION IT CONTAINS IS NOT TO BE DISCLOSED, REPRODUCED OR COPIED IN WHOLE OR PART WITHOUT WRITTEN APPROVAL FROM NEWHAVEN DISPLAY. 7 8 F Pin Description CON2: Pin No. 1 2 3 4 5 6 7-22 23 24 25 26 27 28 29-32 Symbol GND VCC NC D/C# WR# RD# [DB0-DB15] NC NC CS# RES# R/L U/D NC External Connection Power Supply Power Supply MPU MPU MPU MPU MPU MPU - Function Description Ground Power supply for LCD and logic (3.3V) No Connect Register Select signal – : 1=Data , 0=Command Active LOW Write signal, 8080 MPU interface Active LOW Read signal, 8080 MPU interface Bi-directional data bus lines No Connect No Connect Active LOW Chip Select signal Active LOW Reset signal Scan direction 1: Right (Tied internally) Scan direction 0: Down (Tied internally) No Connect External Connection Power Supply Power Supply Function Description Red, LED Anode (140mA @ 9.9V) No Connect White, LED Cathode (Ground) Recommended LCD connector: 0.5mm pitch 32-Conductor FFC. Molex 015166-0348 Backlight: Pin No. 1 2 3 Symbol VDD NC GND Backlight connector: JST p/n: XHP-3 Mates with: JST p/n: B 3B-XH-A [4] Electrical Characteristics Item Operating Temperature Range Storage Temperature Range Supply Voltage Supply Current “H” Level input “L” Level input Backlight Supply Current Backlight Supply Voltage Backlight Lifetime* Symbol TOP TST VDD IDD VIH VIL Condition Absolute Max Absolute Max VDD = 3.3V - Min. -20 -30 3.0 105 0.8*VDD GND Typ. 3.3 210 - Max. +70 +80 3.6 315 VDD 0.2*VDD Unit ⁰C ⁰C V mA V V ILED VLED - ILED = 140mA TOP = 25°C 9.0 - 140 9.9 50,000 175 10.5 - mA V Hrs. Symbol ϕY+ ϕYθXθX+ CR LV TR TF Condition Min. 150 400 - Typ. 70 50 70 70 250 500 15 35 Max. 30 50 Unit ⁰ ⁰ ⁰ ⁰ cd/m2 ms ms *Backlight lifetime is rated as Hours until half-brightness, under normal operating conditions. The LED of the backlight is driven by current drain; drive voltage is for reference only. Drive voltage must be selected to ensure backlight current drain is below MAX level stated. Optical Characteristics Optimal Viewing Angles Contrast Ratio Luminance Item Top Bottom Left Right Response Time Rise Fall CR ≥ 10 ILED = 140 mA TOP = 25°C Controller Information Built-in SSD1963 Controller. Please download specification at http://www.newhavendisplay.com/app_notes/SSD1963.pdf [5] 8080 Mode Interface: The 8080 mode MPU interface consists of CS#, D/C, RD#, WR#, and DB[7:0]. This interface uses WR# to define a write cycle and RD# to define a read cycle. If the WR# goes LOW when the CS# signal is LOW, the data or command will be latched into the system at the rising edge of WR#. Similarly, the read cycle will start when RD# goes LOW and end at the rising edge of RD#. See the SSD1963 datasheet for detailed timing diagrams. Command Instructions: See the SSD1963 datasheet for the Instruction Table and Command Descriptions. Pixel Data Format: [6] Quality Information Test Item High Temperature storage Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature / Humidity Operation Thermal Shock resistance Vibration test Static electricity test Content of Test Endurance test applying the high storage temperature for a long time. Endurance test applying the low storage temperature for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. Endurance test applying vibration to simulate transportation and use. Endurance test applying electric static discharge. Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container. Precautions for using LCDs/LCMs Test Condition +80⁰C , 200hrs http://www.newhavendisplay.com/index.php?main_page=terms [7] 2 -30⁰C , 200hrs 1,2 +70⁰C , 200hrs 2 -20⁰C , 200hrs 1,2 +60⁰C, 90% RH, 96hrs 1,2 -20⁰C, 30min -> 25⁰C, 5min -> 70⁰C, 30min = 1 cycle For 10 cycles 10-55Hz, 1.5mm amplitude. 60 sec in each of 3 directions X,Y,Z For 15 minutes VS=800V, RS=1.5kΩ, CS=100pF One time See Precautions at www.newhavendisplay.com/specs/precautions.pdf Warranty Information and Terms & Conditions Note 3