NHD-5.7-320240WFB-ETXI#-T-1

NHD-5.7-320240WFB-ETXI#-T-1 TFT (Thin-Film-Transistor) Color Liquid Crystal Display Module NHD5.7320240WFBETXI#-1 T- Newhaven Display 5.7” Diagonal 320xRGBx240 Pixels Model Built-in Driver + 16-Bit Controller White LED Backlight TFT 12:00 Optimal View, Wide Temp. RoHS Compliant Touch Panel Newhaven Display International, Inc. 2661 Galvin Ct. Elgin IL, 60124 Ph: 847-844-8795 Fax: 847-844-8796 www.newhavendisplay.com nhtech@newhavendisplay.com nhsales@newhavendisplay.com Document Revision History Revision 0 1 2 3 4 5 6 7 8 9 10 11 Date 7/8/2009 7/29/2009 11/4/2009 3/26/2010 5/24/2011 1/6/2012 5/15/2012 7/17/2012 1/10/17 2/21/17 4/19/17 5/30/19 Description Initial Release MECHANICAL DRAWING UPDATE Quality Information Update Pin Description Update Electrical characteristics updated Pixel data format updated Touch panel pin description updated Mechanical drawing updated Mech. Drawing, Electrical and Optical Characteristics Updated Mechanical and Electrical Characteristics Updated Mechanical Drawing and Optical Characteristics Updated Recommended Connector, Electrical & Optical Characteristics Updated Functions and Features • • • • 320xRGBx240 resolution LED backlight 16-bit parallel interface SSD1963 Controller [2] Changed by CL CL BE MP AK AK AK AK TM TM TM SB 1 2 3 4 5 6 7 SYMBOL 8 REVISION DATE A A B B C C Part area D E F D Part Area Notes: 1. Voltage: 2. Backlight: 3. Display Type: 4. Display Mode: 5. Driver IC: 6. Interface: 7. Op�mal View: 8. Luminance: 1 3.3V VDD 140mA @ 9.9V, White LED 5.7” TFT, 320x240 Pixels Transmissive, Normally White SSD1963, 16-Bit Parallel Interface 8-bit Parallel MCU 12:00 390 cd/m² (Typical) 2 3 4 Backlight Circuit A E STANDARD TOLERANCE: K (UNLESS OTHERWISE SPECIFIED) LINEAR: ±0.3mm NHD-5.7-320240WFB-ETXI#-T-1 UNLESS OTHERWISE SPECIFIED: DRAWN BY: - DIMENSIONS ARE IN MILLIMETERS DRAWN DATE: - THIRD ANGLE PROJECTION 5 6 REVISION: DRAWING/PART NUMBER: S. Baxi 5/30/19 APPROVED BY: A3 S. Baxi SCALE: APPROVED DATE: DO NOT SCALE DRAWING 1.0 SIZE: NS 5/30/19 SHEET 1 OF 2 THIS DRAWING IS SOLELY THE PROPERTY OF NEWHAVEN DISPLAY INTERNATIONAL, INC. THE INFORMATION IT CONTAINS IS NOT TO BE DISCLOSED, REPRODUCED OR COPIED IN WHOLE OR PART WITHOUT WRITTEN APPROVAL FROM NEWHAVEN DISPLAY. 7 8 F 1 2 3 4 5 6 7 SYMBOL 8 REVISION DATE A 4.50 5.90 A 1.55±0.1(ADH Included) 104.00±0.2(O.D) 93.30±0.2(V.A) 90.30(A.A) 5.30 5.80 5.40 7.90 119.20(A.A) bot t om Pitch2.54x3=7.62 Pin1 left 10.00±0.3(Stiffener) D 51.50±0.5 61.00±0.7 13.40 Housing Drawing 15.00±0.2 Single layer thickness 0.24±0.02 Housing E F Notes: 1. Touch Panel Type: 2. Opera�ng Voltage: 3. Life�me: Pen: Pi�ng: 4. Surface Hardness: 5. Opera�ng Force: 6. Transmi�ance: 7. Response TIme: 1 C 14.90 Pin4 BACK 10.00 t op B D 14.50 C 140.00±0.2(O.D) SEC:A" SCALE:2X Back plate 122.10±0.2(V.A) 12.70 ITO GLASST=1.1mm Pitch 2.54*3=7.62 ITO FILM T=0.188mm 2.54 Line Width 1.30*4 B FRONT Pin4 10.00 Pin1 ADH 6.00 right PIN OUT 1 Top 48.20±0.5 Resis�ve 3V ~ 15V 2 100,000 Characters 1,000,000 Touches ≥3H 30g ~ 100g ≥78% 10 ms 3 2 3 4 Bottom Left Right E STANDARD TOLERANCE: (UNLESS OTHERWISE SPECIFIED) LINEAR: ±0.3mm NHD-5.7-320240WFB-ETXI#-T-1 UNLESS OTHERWISE SPECIFIED: DRAWN BY: - DIMENSIONS ARE IN MILLIMETERS DRAWN DATE: - THIRD ANGLE PROJECTION 4 5 6 REVISION: DRAWING/PART NUMBER: S. Baxi 5/30/19 APPROVED BY: A3 S. Baxi SCALE: APPROVED DATE: DO NOT SCALE DRAWING 1.0 SIZE: NS 5/30/19 SHEET 2 OF 2 THIS DRAWING IS SOLELY THE PROPERTY OF NEWHAVEN DISPLAY INTERNATIONAL, INC. THE INFORMATION IT CONTAINS IS NOT TO BE DISCLOSED, REPRODUCED OR COPIED IN WHOLE OR PART WITHOUT WRITTEN APPROVAL FROM NEWHAVEN DISPLAY. 7 8 F Pin Description CON2: Pin No. 1 2 3 4 5 6 7-22 23 24 25 26 27 28 29-32 Symbol GND VCC NC D/C# WR# RD# [DB0-DB15] NC NC CS# RES# R/L U/D NC External Connection Power Supply Power Supply MPU MPU MPU MPU MPU MPU - Function Description Ground Power supply for LCD and logic (3.3V) No Connect Register Select signal – : 1=Data , 0=Command Active LOW Write signal, 8080 MPU interface Active LOW Read signal, 8080 MPU interface Bi-directional data bus lines No Connect No Connect Active LOW Chip Select signal Active LOW Reset signal Scan direction 1: Right (Tied internally) Scan direction 0: Down (Tied internally) No Connect External Connection Power Supply Power Supply Function Description Red, LED Anode (140mA @ 9.9V) No Connect White, LED Cathode (Ground) External Connection Touch Controller Touch Controller Touch Controller Touch Controller Function Description TOP BOTTOM LEFT RIGHT Recommended LCD connector: 0.5mm pitch 32-Conductor FFC. Molex 015166-0348 Backlight: Pin No. 1 2 3 Symbol VDD NC GND Backlight connector: JST p/n: XHP-3 Mates with: JST p/n: B 3B-XH-A Touch Panel: Pin No. 1 2 3 4 Symbol Y+ YX+ X- Recommended Touch panel connector: 2.54mm pitch Standard Pin Headers [5] Electrical Characteristics Item Operating Temperature Range Storage Temperature Range Supply Voltage Supply Current “H” Level input “L” Level input Backlight Supply Current Backlight Supply Voltage Backlight Lifetime* Symbol TOP TST VDD IDD VIH VIL Condition Absolute Max Absolute Max VDD = 3.3V - Min. -20 -30 3.0 105 0.8*VDD GND Typ. 3.3 210 - Max. +70 +80 3.6 315 VDD 0.2*VDD Unit ⁰C ⁰C V mA V V ILED VLED - ILED = 140mA TOP = 25°C 9.0 - 140 9.9 50,000 210 10.5 - mA V Hrs. Symbol ϕY+ ϕYθXθX+ CR LV TR TF Condition Min. 150 310 - Typ. 70 50 70 70 250 390 15 35 Max. 30 50 Unit ⁰ ⁰ ⁰ ⁰ cd/m2 ms ms *Backlight lifetime is rated as Hours until half-brightness, under normal operating conditions. The LED of the backlight is driven by current drain; drive voltage is for reference only. Drive voltage must be selected to ensure backlight current drain is below MAX level stated. Optical Characteristics Optimal Viewing Angles Contrast Ratio Luminance Item Top Bottom Left Right Response Time Rise Fall Touch Panel Characteristics Item Linearity Circuit Resistance – X-Axis Circuit Resistance – Y-Axis Insulation Resistance Operating Voltage Response Time Transmittance Activation Force Pen Writing Durability Pitting Durability Surface Hardness Min. 150 350 20 3 78 30 100,000 1,000,000 3 CR ≥ 10 ILED = 140 mA TOP = 25°C Typ. - Max. 1.5 650 1000 15 10 100 - Controller Information Unit % Ω Ω MΩ V ms % g Characters Touches H Built-in SSD1963 Controller. Please download specification at http://www.newhavendisplay.com/app_notes/SSD1963.pdf [6] 8080 Mode Interface: The 8080 mode MPU interface consists of CS#, D/C, RD#, WR#, and DB[7:0]. This interface uses WR# to define a write cycle and RD# to define a read cycle. If the WR# goes LOW when the CS# signal is LOW, the data or command will be latched into the system at the rising edge of WR#. Similarly, the read cycle will start when RD# goes LOW and end at the rising edge of RD#. See the SSD1963 datasheet for detailed timing diagrams. Command Instructions: See the SSD1963 datasheet for the Instruction Table and Command Descriptions. Pixel Data Format: [7] Quality Information Test Item High Temperature storage Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature / Humidity Operation Thermal Shock resistance Vibration test Static electricity test Content of Test Endurance test applying the high storage temperature for a long time. Endurance test applying the low storage temperature for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. Endurance test applying vibration to simulate transportation and use. Endurance test applying electric static discharge. Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container. Precautions for using LCDs/LCMs Test Condition +80⁰C , 200hrs http://www.newhavendisplay.com/index.php?main_page=terms [8] 2 -30⁰C , 200hrs 1,2 +70⁰C , 200hrs 2 -20⁰C , 200hrs 1,2 +60⁰C, 90% RH, 96hrs 1,2 -20⁰C, 30min -> 25⁰C, 5min -> 70⁰C, 30min = 1 cycle For 10 cycles 10-55Hz, 1.5mm amplitude. 60 sec in each of 3 directions X,Y,Z For 15 minutes VS=800V, RS=1.5kΩ, CS=100pF One time See Precautions at www.newhavendisplay.com/specs/precautions.pdf Warranty Information and Terms & Conditions Note 3