NHD-7.0-800480EF-ASXN#-T

NHD-7.0-800480EF-ASXN#-T TFT (Thin-Film-Transistor) Color Liquid Crystal Display Module NHD7.0800480EFASXN#T- Newhaven Display 7.0” Diagonal 800x480 Pixels Model Built-in Driver / No Controller Sunlight Readable TFT TN, Wide Temperature RoHS Compliant Resistive Touch Panel Newhaven Display International, Inc. 2661 Galvin Ct. Elgin IL, 60124 Ph: 847-844-8795 Fax: 847-844-8796 www.newhavendisplay.com nhtech@newhavendisplay.com nhsales@newhavendisplay.com Document Revision History Revision 0 1 2 3 4 5 6 7 Date 3/10/16 7/5/16 9/15/17 3/9/20 5/22/20 6/4/20 1/15/21 5/24/21 Description Initial Release Added Chromaticity, Updated Touch Panel Characteristics Backlight & Touch Panel Characteristics Updated LCD Driver Changed to EK9716 Fixed Errors in Typical Backlight Voltage Value Updated Viewing Angles, Quality Information Updated 2D Mechanical Drawing Updated Mechanical Drawing Functions and Features • • • • • • 800x480 resolution LED backlight 24-bit digital RGB interface 16.7M colors Sunlight Readable 4-wire resistive Touch Panel [2] Changed by SB SB SB SB AS AS AS JT 1 3 Mechanical Drawing 4 5 (6.889) (5.999) (5.499) 0.5±0.4 5.3 2.019±0.2 165±0.3 164.3±0.2/TP V.A156.68/TP 156.7±0.2/BZ OPENING 155.7±0.2/TOP-POL A.A155.68/TP 153.84 A.A 0.7±0.2 (6) 6.11 0.5±0.4 (6.5) (7.26) B TEAR TAPE FRONT XR ACTIVE AREA CENTER NEWHAVEN DISPLAY WWYY NHD-7.0-800480EF-ASXN#-T_Rev1A BACK (49.7) 85.63 A.A A.A87.52/TP V.A88.52/TP 88.1±0.2/TOP-POL 89.1±0.2/BZ OPENING 99±0.2/TP 104±0.3 OUTLINE 800(RGB)*480 XL YD P1*3=3 5±0.1 1 3 4 COVERLAYER OPEN 74.93±0.5 1 CENTER LINE 1 40 W=0.3±0.03 P0.5X(40-1)=19.5±0.05 0.5±0.1 20.5±0.1 .2 R0 2 4 22.4±0.5 Notes: 1. Display Size: 7.0” TFT 2. Op�mal View: 12:00 3. Display Mode: Transmissive / Normally White / An�-Glare 4. Driver IC: EK9716 & EK73002 5. Supply Voltage: 3.3V 6. Backlight: White LED / 9.3 V / 180 mA (Typ) 7. Brightness: 780cd/m² (Typ) 8. Touch Panel: 4-Wire Resis�ve 9. 3M Brightness Enhancement Film 1 STIFFENER (PI) 0.3±0.05 0.3±0.05 4 3.5±0.3 1.75 0.3±0.03 1 4.5±0.5 36.04 DETAIL A 10±0.5 5±0.3 40 78.17±0.5 W=0.5±0.05 P1X3=3±0.1 (86.1) 20.39±0.5 Pin No. 1 2 3 4 5-12 13-20 21-28 29 30 31 32 33 34 35 36 37 38 39 40 Date code on RTP FPC (17.07) (39) COMPONENT AREA Contact side 1 YU YD XL XR 1.8 Max. WWYY 4 COMPONENT AREA TFT Pinout: White silk on FPC 5 15±1 (4) 71±0.5 (4) 1 F DATE 4.7±0.35 COVERLAYER OPEN E 8 (80.82) YU D 7 REVISION A B C 6 SYMBOL 4-R2 A 2 5 D E STANDARD TOLERANCE: K- LED CIRCUIT Symbol LEDK LEDA GND VDD [R0-R7] [G0-G7] [B0-B7] GND DCLK DISP HSYNC VSYNC DEN NC GND XR YD XL YU C (UNLESS OTHERWISE SPECIFIED) LINEAR: ±0.3mm A+ 6 REVISION: DRAWING/PART NUMBER: 1A NHD-7.0-800480EF-ASXN#-T UNLESS OTHERWISE SPECIFIED: DRAWN BY: - DIMENSIONS ARE IN MILLIMETERS DRAWN DATE: - THIRD ANGLE PROJECTION J.Thomas 5/24/21 APPROVED BY: SIZE: A3 J.Thomas SCALE: APPROVED DATE: DO NOT SCALE DRAWING NS 5/24/21 SHEET 1 OF 1 THIS DRAWING IS SOLELY THE PROPERTY OF NEWHAVEN DISPLAY INTERNATIONAL, INC. THE INFORMATION IT CONTAINS IS NOT TO BE DISCLOSED, REPRODUCED OR COPIED IN WHOLE OR PART WITHOUT WRITTEN APPROVAL FROM NEWHAVEN DISPLAY. 7 8 F Pin Description TFT: Pin No. 1 2 3 4 5-12 13-20 21-28 29 30 31 32 33 34 35 36 37 38 39 40 Symbol LED_K LED_A GND VDD [R0-R7] [G0-G7] [B0-B7] GND DCLK DISP HSYNC VSYNC DEN NC GND NC(XR) NC(YD) NC(XL) NC(YU) External Connection Power Supply Power Supply Power Supply Power Supply MPU MPU MPU Power Supply MPU MPU MPU MPU MPU Power Supply - Function Description Backlight Cathode (Ground) Backlight Anode (180mA @ 9.3V) Ground Supply Voltage for LCD and logic (3.3V) Red Data signals Green Data signals Blue Data signals Ground Dot Data Clock (Falling Edge Triggered) Display on/off DISP=1:Display ON Line synchronization signal Frame synchronization signal Data Enable signal No Connect Ground No Connect No Connect No Connect No Connect Recommended connector: 0.5mm pitch 40-Conductor FFC. Molex p/n: 54104-4031 (top contact) Resistive Touch Panel: Pin No. 1 2 3 4 Symbol XL YD XR YU External Connection Touch Controller Touch Controller Touch Controller Touch Controller Function Description Touch Panel – Left Touch Panel – Down Touch Panel – Right Touch Panel – Up Recommended connector: 1.0mm pitch 4-Conductor FFC. Molex p/n: 52207-0485 (top contact) Driver Information Built-in HX8264-D02 Source Driver: http://www.newhavendisplay.com/app_notes/HX8264-D02.pdf Built-in HX8664-B Gate Driver: http://www.newhavendisplay.com/app_notes/HX8664-B.pdf [4] Electrical Characteristics Item Operating Temperature Range Storage Temperature Range Supply Voltage Supply Current “H” Level Input “L” Level Input “H” Level Output “L” Level Output Backlight Supply Current Backlight Supply Voltage Backlight Lifetime* Symbol TOP TST VDD IDD VIH VIL VOH VOL Condition Absolute Max Absolute Max VDD = 3.3V, 25oC - Min. -20 -30 3.0 45 0.7*VDD VSS VDD-0.4 VSS Typ. 3.3 90 - Max. +70 +80 3.6 135 VDD 0.3*VDD VSS+0.4 Unit ⁰C ⁰C V mA V V V V ILED VLED - ILED = 180 mA TOP = 25° C 8.4 20,000 180 9.3 50,000 225 10.2 - mA V Hrs. *Backlight lifetime is rated as Hours until half-brightness, under normal operating conditions. The LED of the backlight is driven by current drain; drive voltage is for reference only. Drive voltage must be selected to ensure backlight current drain is below MAX level stated. Optical Characteristics Optimal Viewing Angles Item Top Bottom Left Right Contrast Ratio Luminance Response Time Red Green Chromaticity Blue White Symbol ϕY+ ϕYθXθX+ CR LV TR + TF XR YR XG YG XB YB XW YW Condition ILED = 180 mA TOP = 25°C Min. 620 - Typ. 60 70 70 70 500 780 25 Max. - Unit ⁰ ⁰ ⁰ ⁰ cd/m2 ms - 0.532 0.292 0.285 0.574 0.104 0.092 0.257 0.334 0.582 0.342 0.335 0.624 0.154 0.142 0.307 0.384 0.632 0.392 0.385 0.674 0.204 0.192 0.357 0.434 - CR ≥ 10 Touch Panel Characteristics Item Linearity Terminal Resistance – X-Axis Terminal Resistance – Y-Axis Insulation Resistance Operating Voltage Chattering Activation Force Pen Writing Durability Pitting Durability Surface Hardness Min. -3 350 50 20 30 50,000 1,000,000 3 Typ. - Max. 3 1100 400 5 15 100 - [5] Unit % Ω Ω MΩ V ms g Characters Touches H Timing Characteristics Parallel RGB Input Timing Requirements Item DCLK Frequency DLCK Period HSYNC VSYNC Period Time Display Period Pulse Width Back Porch Front Porch Display Period Period Time Pulse Width Back Porch Front Porch Symbol Fclk Tclk Th Thdisp Thw Thbp Thfp Tvdisp Tv Tvw Tvbp Tvfp Min. 28.2 25 908 1 87 20 517 1 31 5 DE Mode Timing Diagram [6] Typ. 29.2 34 928 800 48 40 40 480 525 1 31 13 Max. 40 1088 87 1 200 613 3 29 101 Unit MHz ns DCLK DCLK DCLK DCLK DCLK H H H H H Remark - Thw + Thbp = 88 DLCK is fixed Tvw + Tvbp = 32 H is fixed - Input Setup Timing Requirements Item VDD Power Source Slew Time CLK cycle time CLK pulse duty Data setup time Data hold time DEN setup time DEN hold time Symbol Tpor Tcph Tcwh Tdsu Tdhd Tesu Tehd Min. 20 40 8 8 8 8 Input Setup Timing Diagram [7] Typ. 50 - Max. 20 60 - Unit ms ns % ns ns ns ns Conditions From 0V to 90% VDD - Power ON/OFF Sequence Enter/Exit Standby Mode Sequence [8] Quality Information Test Item Content of Test High Temperature storage Endurance test applying the high storage temperature for a long time. Endurance test applying the low storage temperature for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. Endurance test applying vibration to simulate transportation and use. Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature / Humidity Storage Thermal Shock resistance Vibration test Static electricity test Test Condition Endurance test applying electric static discharge. 2 -30⁰C, 96hrs 1,2 +70⁰C, 96hrs 2 -20⁰C, 96hrs 1,2 +50⁰C, 90% RH, 96hrs 1,2 -20⁰C, 60min -> 70⁰C, 60min, = 1 Cycle For 20 cycles 10-50Hz , 5G Acceleration 60 sec in each of 3 directions (X,Y,Z) For 30 minutes Air: ±8KV 150pf/330Ω 5 Times Contact: ±4KV 150pf/330Ω 5 times Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container. Precautions for using LCDs/LCMs See Precautions at www.newhavendisplay.com/specs/precautions.pdf Warranty Information and Terms & Conditions http://www.newhavendisplay.com/index.php?main_page=terms [9] Note +80⁰C, 96hrs 3