NHD-7.0-800480EF-ASXV# 数据手册
NHD-7.0-800480EF-ASXV#
TFT (Thin-Film-Transistor) Color Liquid Crystal Display Module
NHD7.0800480EFASXV#-
Newhaven Display
7.0” Diagonal
800xRGBx480 Pixels
Model
Built-in Driver / No Controller
High Brightness, White LED Backlight
TFT
MVA, Wide Temperature
RoHS Compliant
Newhaven Display International, Inc.
2661 Galvin Ct.
Elgin IL, 60124
Ph: 847-844-8795
Fax: 847-844-8796
www.newhavendisplay.com
nhtech@newhavendisplay.com
nhsales@newhavendisplay.com
Document Revision History
Revision
0
1
2
3
4
Date
3/10/16
7/5/16
6/20/19
3/9/20
6/4/20
5
6
3/2/21
5/20/21
Description
Initial Release
Chromaticity Added
Backlight Characteristics Updated
LCD Driver Changed to EK9716
Updated 2D Mechanical Drawing, Contrast Ratio, Quality
Information
Updated Silkscreen on FPC
Updated Mechanical Drawing
Functions and Features
•
•
•
•
•
800xRGBx480 resolution
LED backlight
24-bit digital RGB interface
16.7M colors
Premium high brightness display
[2]
Changed by
SB
SB
SB
SB
AS
AS
JT
1
A
2
3
Mechanical Drawing
4
5
6
7
SYMBOL
8
REVISION
DATE
A
165±0.3
5.3
(6.889)
3.5±0.3
FRONT
800(RGB)*480
B
ACTIVE AREA CENTER
NEWHAVEN DISPLAY
WWYY
NHD-7.0-800480EF-A SXV#_Rev1A
BACK
89.1P0.2/BZ OPENING
85.63 A.A
49.7
104±0.3 OUTLINE
(80.82)
153.84 A.A
TEAR TAPE
B
6.11
(7.26)
156.7±0.2/BZ OPENING
White silk on FPC
1.5 Max.
40
1
DETAIL A
0.3±0.05
36.04
4.5±0.5
W=0.5±0.05
P1X3=3±0.1
(86.1)
20.39±0.5
D
COMPONENT
AREA
TFT Pinout:
4-R2
COVERLAYER OPEN
(39)
1
YU YD
XL XR
Contact side
(4)
4
5
COMPONENT AREA
(17.07)
71±0.5
(4)
15±1
COVERLAYER OPEN
STIFFENER (PI)
C
74.93±0.5
CENTER LINE
40
F
Notes:
1. Display Size:
7.0” TFT
2. Op�mal View:
Full View
3. Display Mode:
Transmissive / Normally White / An�-Glare
4. Driver IC:
EK9716 & EK73002
5. Supply Voltage:
3.3V
6. Backlight:
White LED / 9.3 V / 180 mA (Typ)
7. Brightness:
800cd/m² (Typ)
8. 3M Brightness Enhancement Film
1
2
3
4
.2
R0
E
3.5±0.3
1.75
0.3±0.03
1
W=0.3±0.03
P0.5X(40-1)=19.5±0.05
0.5±0.1
20.5±0.1
DETAIL A
K-
Symbol
LEDK
LEDA
GND
VDD
[R0-R7]
[G0-G7]
[B0-B7]
GND
CLK
DISP
HSYNC
HSYNC
DEN
NC
GND
NC(XR)
NC(YD)
NC(XL)
NC(YU)
D
E
STANDARD TOLERANCE:
(UNLESS OTHERWISE SPECIFIED)
LINEAR: ±0.3mm
A+
6
REVISION:
DRAWING/PART NUMBER:
1A
NHD-7.0-800480EF-ASXV
UNLESS OTHERWISE SPECIFIED:
DRAWN BY:
- DIMENSIONS ARE IN MILLIMETERS
DRAWN DATE:
- THIRD ANGLE PROJECTION
LED CIRCUIT
5
Pin No.
1
2
3
4
5-12
13-20
21-28
29
30
31
32
33
34
35
36
37
38
39
40
C
J.Thomas
5/20/2021
APPROVED BY:
SIZE:
A3
J.Thomas
SCALE:
APPROVED DATE:
DO NOT SCALE DRAWING
NS
5/20/2021
SHEET 1 OF 1
THIS DRAWING IS SOLELY THE PROPERTY OF NEWHAVEN DISPLAY INTERNATIONAL, INC.
THE INFORMATION IT CONTAINS IS NOT TO BE DISCLOSED, REPRODUCED OR COPIED IN
WHOLE OR PART WITHOUT WRITTEN APPROVAL FROM NEWHAVEN DISPLAY.
7
8
F
Pin Description
Pin No.
1
2
3
4
5-12
13-20
21-28
29
30
31
32
33
34
35
36
37
38
39
40
Symbol
LED-K
LED-A
GND
VDD
[R0-R7]
[G0-G7]
[B0-B7]
GND
DCLK
DISP
HSYNC
VSSYNC
DEN
NC
GND
NC(XR)
NC(YD)
NC(XL)
NC(YU)
Electrical Connection
Power Supply
Power Supply
Power Supply
Power Supply
MPU
MPU
MPU
Power Supply
MPU
MPU
MPU
MPU
MPU
Power Supply
-
Function Description
Backlight Cathode (Ground)
Backlight Anode (180mA @ 9.3V)
Ground
Supply Voltage for LCD and logic(+3.3V)
Red Data signals
Green Data signals
Blue Data signals
Ground
Dot data Clock (Falling Edge Triggered)
Display ON/OFF signal. DISP=1: Display ON
Line synchronization signal
Frame synchronization signal
Data Enable signal
No Connect
Ground
No Connect
No Connect
No Connect
No Connect
Recommended LCD connector: 40pin 0.5mm pitch FFC. Molex P/N: 54104-4031 (top contact)
[4]
Electrical Characteristics
Item
Operating Temperature Range
Storage Temperature Range
Supply Voltage
Supply Current
“H” Level Input
“L” Level Input
“H” Level Output
“L” Level Input
Backlight Supply Current
Backlight Supply Voltage
Backlight Lifetime*
Symbol
TOP
TST
VDD
IDD
VIH
VIL
VOH
VOL
Condition
Absolute Max
Absolute Max
VDD = 3.3V, 25oC
-
Min.
-20
-30
3.0
45
0.7*VDD
VSS
VDD - 0.4
VSS
Typ.
3.3
90
-
Max.
+70
+80
3.6
135
VDD
0.3*VDD
VDD
VSS + 0.4
Unit
⁰C
⁰C
V
mA
V
V
V
V
ILED
VLED
-
ILED = 180 mA
TOP = 25° C
8.4
20,000
180
9.3
50,000
225
10.2
-
mA
V
Hrs.
*Backlight lifetime is rated as Hours until half-brightness, under normal operating conditions. The LED of the backlight is driven by current drain; drive voltage is for
reference only. Drive voltage must be selected to ensure backlight current drain is below MAX level stated.
Optical Characteristics
Optimal
Viewing
Angles
Item
Top
Bottom
Left
Right
Contrast Ratio
Luminance
Response Time
Red
Green
Chromaticity
Blue
White
Symbol
ϕY+
ϕYθXθX+
CR
LV
TR+TF
XR
YR
XG
YG
XB
YB
XW
YW
Condition
Cr ≥10
ILED = 180 mA
TOP = 25°C
-
Min.
640
0.532
0.292
0.285
0.574
0.104
0.092
0.257
0.334
Typ.
70
70
70
70
500
800
25
0.582
0.342
0.335
0.624
0.154
0.142
0.307
0.384
Max.
0.632
0.392
0.385
0.674
0.204
0.192
0.357
0.434
Unit
⁰
⁰
⁰
⁰
cd/m2
ms
-
Driver Information
Built-in EK9716B Source Driver: https://www.newhavendisplay.com/appnotes/datasheets/LCDs/EK9716B_v1-1.pdf
Built-in EK73002AB2 Gate Driver: https://www.newhavendisplay.com/appnotes/datasheets/LCDs/EK73002AB2.pdf
[5]
Timing Characteristics
Parallel RGB Input Timing Requirements
Item
DCLK Frequency
DLCK Period
HSYNC
VSYNC
Period Time
Display Period
Pulse Width
Back Porch
Front Porch
Display Period
Period Time
Pulse Width
Back Porch
Front Porch
Symbol
Fclk
Tclk
Th
Thdisp
Thw
Thbp
Thfp
Tvdisp
Tv
Tvw
Tvbp
Tvfp
Min.
28.2
25
908
1
87
20
517
1
31
5
DE Mode Timing Diagram
[6]
Typ.
29.2
34
928
800
48
40
40
480
525
1
31
13
Max.
40
1088
87
1
200
613
3
29
101
Unit
MHz
ns
DCLK
DCLK
DCLK
DCLK
DCLK
H
H
H
H
H
Remark
-
Thw + Thbp = 88 DLCK is fixed
Tvw + Tvbp = 32 H is fixed
-
Input Setup Timing Requirements
Item
VDD Power Source Slew Time
CLK cycle time
CLK pulse duty
Data setup time
Data hold time
DEN setup time
DEN hold time
Symbol
Tpor
Tcph
Tcwh
Tdsu
Tdhd
Tesu
Tehd
Min.
20
40
8
8
8
8
Input Setup Timing Diagram
[7]
Typ.
50
-
Max.
20
60
-
Unit
ms
ns
%
ns
ns
ns
ns
Conditions
From 0V to 90% VDD
-
Power ON/OFF Sequence
Enter/Exit Standby Mode Sequence
[8]
Quality Information
Test Item
Content of Test
High Temperature storage
Endurance test applying the high storage
temperature for a long time.
Endurance test applying the low storage
temperature for a long time.
Endurance test applying the electric stress
(voltage & current) and the high thermal
stress for a long time.
Endurance test applying the electric stress
(voltage & current) and the low thermal
stress for a long time.
Endurance test applying the electric stress
(voltage & current) and the high thermal
with high humidity stress for a long time.
Endurance test applying the electric stress
(voltage & current) during a cycle of low
and high thermal stress.
Endurance test applying vibration to
simulate transportation and use.
Endurance test applying electric static
discharge.
Low Temperature storage
High Temperature
Operation
Low Temperature
Operation
High Temperature /
Humidity Operation
Thermal Shock resistance
Vibration test
Static electricity test
Test Condition
2
-30⁰C, 96hrs
1,2
+70⁰C, 96hrs
2
-20⁰C, 96hrs
1,2
+50⁰C, 90% RH, 96hrs
1,2
-20⁰C, 60min -> 70⁰C, 60min
= 1 cycle
For 20 cycles
10-50Hz, 5G amplitude.
30 min in each of 3 directions: X, Y, Z
Air: ±8KV 150pf/330Ω 5 Times
Contact: ±4KV 150pf/330Ω 5 times
3
Note 1: No condensation to be observed.
Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH.
Note 3: Test performed on product itself, not inside a container.
Precautions for using LCDs/LCMs
See Precautions at www.newhavendisplay.com/specs/precautions.pdf
Warranty Information and Terms & Conditions
http://www.newhavendisplay.com/index.php?main_page=terms
[9]
Note
+80⁰C, 96hrs
NHD-7.0-800480EF-ASXV# 价格&库存
很抱歉,暂时无法提供与“NHD-7.0-800480EF-ASXV#”相匹配的价格&库存,您可以联系我们找货
免费人工找货