NHD-7.0-800480EF-ATXL#

NHD-7.0-800480EF-ATXL# TFT (Thin-Film-Transistor) Color Liquid Crystal Display Module NHD7.0800480EFATXL#- Newhaven Display 7.0” Diagonal 800xRGBx480 Pixels Model Built-in Driver / No Controller White LED backlight TFT 12:00 Optimal View, Wide Temperature RoHS Compliant Newhaven Display International, Inc. 2661 Galvin Ct. Elgin IL, 60124 Ph: 847-844-8795 Fax: 847-844-8796 www.newhavendisplay.com nhtech@newhavendisplay.com nhsales@newhavendisplay.com Document Revision History Revision 0 1 2 3 4 5 6 7 8 9 Date 8/29/2013 2/10/2015 4/1/2015 3/11/16 7/5/16 6/20/19 1/21/20 6/4/20 3/2/21 5/21/21 Description Initial Release Mechanical drawing updated Mechanical drawing updated Added Backlight Lifetime, Datasheet Reformat Added Chromaticity Backlight Characteristics Updated LCD Driver Changed to EK9716 Updated 2D Mechanical Drawing, Quality Information Updated 2D Mechanical Drawing & Chromaticity Values Updated the Mechanical Drawing Functions and Features • • • • 800xRGBx480 resolution LED backlight 24-bit digital RGB interface 16.7M colors [2] Changed by ML AK AK SB SB SB SB AS AS JT 1 3 Mechanical Drawing (6.889) 5 6 7 SYMBOL 8 REVISION DATE A 165±0.3 156.7±0.2/BZ OPENING 155.7±0.2 TOP POL 153.84 A.A 6.11 0.5±0.4 (7.26) 3.5±0.3 49.7 85.63 A.A 88.1±0.2 TOP POL 89.1P0.2/BZ OPENING 104±0.3 OUTLINE TEAR TAPE B 800(RGB)*480 ACTIVE AREA CENTER NEWHAVEN DISPLAY WWYY NHD-7.0-800480EF-ATXL#_Rev1A BACK 0.5±0.4 5.3 B (80.82) 4 FRONT A 2 C TFT Pinout: Pin No. 1 2 3 4 5-12 13-20 21-28 29 30 31 32 33 34 35 36 37 38 39 40 NHD-7.0-800480EF_A 1.5 Max. DETAIL A COVERLAYER OPEN STIFFENER (PI) 40 Contact side 20.39±0.5 0.3±0.05 4.5±0.5 36.04 W=0.5±0.05 P1X3=3±0.1 (86.1) D 1 COMPONENT AREA (17.07) (39) 1 YU YD XL XR 5 15±1 (4) 71±0.5 (4) 4 COMPONENT AREA White silk on FPC 4-R2 COVERLAYER OPEN 74.93±0.5 CENTER LINE 1 W=0.3±0.03 P0.5X(40-1)=19.5±0.05 0.5±0.1 20.5±0.1 .2 F 40 R0 0.3±0.03 1.75 3.5±0.3 E C Notes: DETAIL A 1. Display Size: 7.0” TFT 2. Op�mal View: 12:00 View 3. Display Mode: Transmissive / Normally White / An�-Glare 4. Driver IC: EK9716 & EK73002 5. Supply Voltage: 3.3V 6. Backlight: White LED / 16 V / 60 mA (Typ) 7. Brightness: 330 cd/m² (Typ) 8. 3M Brightness Enhancement Film 1 2 3 4 Symbol LEDK LEDA GND VDD [R0-R7] [G0-G7] [B0-B7] GND CLK DISP HSYNC HSYNC DEN NC GND NC(XR) NC(YD) NC(XL) NC(YU) D E STANDARD TOLERANCE: (UNLESS OTHERWISE SPECIFIED) A+ LINEAR: ±0.3mm K- LED CIRCUIT 5*3=15EA,20mA*3=60mA 5 6 REVISION: DRAWING/PART NUMBER: 1A NHD-7.0-800480EF-ATXL# UNLESS OTHERWISE SPECIFIED: DRAWN BY: - DIMENSIONS ARE IN MILLIMETERS DRAWN DATE: - THIRD ANGLE PROJECTION J.Thomas 5/21/21 APPROVED BY: SIZE: A3 J.Thomas SCALE: APPROVED DATE: DO NOT SCALE DRAWING NS 5/21/21 SHEET 1 OF 1 THIS DRAWING IS SOLELY THE PROPERTY OF NEWHAVEN DISPLAY INTERNATIONAL, INC. THE INFORMATION IT CONTAINS IS NOT TO BE DISCLOSED, REPRODUCED OR COPIED IN WHOLE OR PART WITHOUT WRITTEN APPROVAL FROM NEWHAVEN DISPLAY. 7 8 F Pin Description Pin No. 1 2 3 4 5-12 13-20 21-28 29 30 31 32 33 34 35 36 37 38 39 40 Symbol LED-K LED-A GND VDD [R0-R7] [G0-G7] [B0-B7] GND CLKIN DISP HSD VSD DEN NC GND NC(XR) NC(YD) NC(XL) NC(YU) Connection Power Supply Power Supply Power Supply Power Supply MPU MPU MPU Power Supply MPU MPU MPU MPU MPU Power Supply - Function Description Ground for Backlight Backlight Power Supply (60mA @ 16V) Ground Power Supply (+3.3V) Red Data Signals Green Data Signals Blue Data Signals Ground Clock for input data (Falling Edge Triggered) Display on/off DISP=1: Display on Line synchronization signal Frame synchronization signal Data Enable signal No Connect Ground No Connect No Connect No Connect No Connect LCD connector: 0.5mm pitch 40-Conductor FFC. Molex p/n: 54104-4031 (top contact) Backlight connector: on LCD connector Mates with: --- [4] Electrical Characteristics Item Operating Temperature Range Storage Temperature Range Supply Voltage Supply Current “H” Level Input “L” Level Input “H” Level Output “L” Level Output Backlight Supply Current Backlight Supply Voltage Backlight Lifetime* Symbol TOP TST VDD IDD VIH VIL VOH VOL Condition Absolute Max Absolute Max VDD=3.3V. 25oC - Min. -20 -30 3.0 47 0.7 * VDD VSS VDD – 0.4 VSS Typ. 3.3 95 - Max. +70 +80 3.6 143 VDD 0.3 * VDD VDD VSS + 0.4 Unit ⁰C ⁰C V mA V V V V ILED VLED - ILED = 60 mA TOP = 25° C 30 14 20,000 60 16 50,000 75 17 - mA V Hrs. *Backlight lifetime is rated as Hours until half-brightness, under normal operating conditions. The LED of the backlight is driven by current drain; drive voltage is for reference only. Drive voltage must be selected to ensure backlight current drain is below MAX level stated Optical Characteristics Optimal Viewing Angles Item Top Bottom Left Right Contrast Ratio Luminance Response Time Red Green Chromaticity Blue White Symbol ϕY+ ϕYθXθX+ CR LV TR+TF XR YR XG YG XB YB XW YW Condition CR ≥10 ILED = 60 mA TOP = 25°C - Min. 260 0.531 0.280 0.298 0.559 0.102 0.054 0.252 0.284 Typ. 70 60 70 70 500 330 25 0.581 0.330 0.348 0.609 0.152 0.104 0.302 0.334 Max. 0.631 0.380 0.398 0.659 0.202 0.154 0.352 0.384 Unit ⁰ ⁰ ⁰ ⁰ cd/m2 ms - Driver Information Built-in EK9716B Source Driver: https://www.newhavendisplay.com/appnotes/datasheets/LCDs/EK9716B_v1-1.pdf Built-in EK73002AB2 Gate Driver: https://www.newhavendisplay.com/appnotes/datasheets/LCDs/EK73002AB2.pdf [5] Timing Characteristics Parallel RGB Input Timing Requirements Item DCLK Frequency DLCK Period HSYNC VSYNC Period Time Display Period Pulse Width Back Porch Front Porch Period Time Display Period Pulse Width Back Porch Front Porch Symbol Fclk Tclk Th Thdisp Thw Thbp Thfp Tv Tvdisp Tvw Tvbp Tvfp Min. 28.2 25 908 1 87 20 517 1 31 5 DE Mode Timing Diagram [6] Typ. 29.2 34 928 800 48 40 40 525 480 1 31 13 Max. 40 1088 87 1 200 613 3 29 101 Unit MHz ns DCLK DCLK DCLK DCLK DCLK H H H H H Remark - Thw + Thbp = 88 DLCK is fixed Tvw + Tvbp = 32 H is fixed - Input Setup Timing Requirements Item VDD Power Source Slew Time CLK cycle time CLK pulse duty Data setup time Data hold time DEN setup time DEN hold time Symbol Tpor Tcph Tcwh Tdsu Tdhd Tesu Tehd Min. 25 40 8 8 8 8 Input Setup Timing Diagram [7] Typ. 50 - Max. 20 60 - Unit ms ns % ns ns ns ns Conditions From 0V to 90% VDD - Power ON/OFF Sequence Enter/Exit Standby Mode Sequence [8] Quality Information Test Item Content of Test High Temperature storage Endurance test applying the high storage temperature for a long time. Endurance test applying the low storage temperature for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. Endurance test applying vibration to simulate transportation and use. Endurance test applying electric static discharge. Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature / Humidity Operation Thermal Shock resistance Vibration test Static electricity test Test Condition 2 -30⁰C, 96hrs 1,2 +70⁰C, 96hrs 2 -20⁰C, 96hrs 1,2 +50⁰C, 90% RH, 96hrs 1,2 -20⁰C, 60min -> 70⁰C, 60min = 1 Cycle, For 20 cycles 10-50Hz, 5G amplitude. 30 min in each of 3 directions: X, Y, Z Air: ±8KV 150pf/330Ω 5 Times Contact: ±4KV 150pf/330Ω 5 times 3 Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container. Precautions for using LCDs/LCMs See Precautions at www.newhavendisplay.com/specs/precautions.pdf Warranty Information and Terms & Conditions http://www.newhavendisplay.com/index.php?main_page=terms [9] Note +80⁰C, 96hrs