NHD-7.0-800480EF-ATXV#-T

NHD-7.0-800480EF-ATXV#-T TFT (Thin-Film-Transistor) Color Liquid Crystal Display Module NHD7.0800480EFATXV#T- Newhaven Display 7.0” Diagonal 800x480 Pixels Model Built-in Driver / No Controller White LED Backlight TFT MVA Type, Wide Temperature RoHS Compliant Resistive Touch Panel Newhaven Display International, Inc. 2661 Galvin Ct. Elgin IL, 60124 Ph: 847-844-8795 Fax: 847-844-8796 www.newhavendisplay.com nhtech@newhavendisplay.com nhsales@newhavendisplay.com Document Revision History Revision 0 1 2 3 4 Date 8/29/2013 8/12/2014 4/1/2015 7/10/2015 3/15/16 Description Initial Release Touch Panel Characteristics updated Mechanical drawing updated Backlight characteristics updated Backlight Lifetime Added, Datasheet Reformat Functions and Features • • • • • • 800x480 resolution LED backlight 24-bit digital RGB interface 16.7M colors High-brightness 4-wire resistive Touch Panel [2] Changed by ML ML AK AK SB L A I Mechanical Drawing 0.7±0.2 (6) 6.11 (6.5) (7.26) 153.84 A.A (49.7) 1 40 COMPONENT AREA 5 1 YU YD XL XR W=0.5±0.05 P1X3=3±0.1 (86.1) 20.39±0.5 C DETAIL A 1 1 BACK 0.3±0.05 0.3±0.05 4 1 4-R2 74.93±0.5 22.4±0.5 CENTER LINE 1 W=0.3±0.03 P0.5X(40-1)=19.5±0.05 0.5±0.1 20.5±0.1 SYMBOL LED-K LED-A GND VDD R0 R1 R2 R3 R4 R5 R6 R7 G0 G1 G2 G3 G4 G5 G6 G7 B0 B1 B2 B3 B4 B5 B6 B7 GND DCLK DISP HSYNC VSYNC DEN NC GND NC(XR) NC(YD) NC(XL) NC(YU) B C LED CIRCUIT 3*8=24EA,20mA*8=160mA D Date 07/10/15 Unit Gen. Tolerance ±0.3mm 4 mm 5 Model: NHD-7.0-800480EF-ATXV#-T 6 The drawing contained herein is the exclusive property of Newhaven Display International, Inc. and shall not be copied, reproduced, and/or disclosed in any format without permission. [3] A PIN Assignment A DETAIL A (3:1) 3 PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Date K 40 .2 R0 2 4 0.3±0.03 1.75 3.5±0.3 O C P1*3=3 5±0.1 Notes: 1. Display Size: 7” TFT 2. Optimal View: Full View 3. Display Mode: Tranmissive / Normally White / Anti Glare D 4. Driver IC: HX8264-D02 5. Power Supply Voltage: 3.3V 6. Backlight: White LED / 9.6 V / 160 mA (Typ) 7. Luminance: 280 cd/m² (Typ) 8. Touch Panel: 4-Wire Resistive 1 1.5 Max. F N (39) 4 5±0.3 (4) COMPONENT AREA (17.07) 71±0.5 (4) 15±1 COVERLAYER OPEN Newhaven Display NHD-7.0-800480EF-ATX V#-T 10±0.5 YD STIFFENER (PI) ACTIVE AREA CENTER 6 Description T N E D I XR FRONT 800(RGB)*480 XL 78.17±0.5 85.63 A.A 89.1±0.2/BZ OPENING V,A88.52/TP A,A87.52/TP 104±0.3 OUTLINE 99±0.2/TP B TEAR TAPE YU 4.7±0.35 Contact side (80.82) 5 Rev COVERLAYER OPEN 165±0.3 164.3±0.2/TP V,A156.68/TP 156.7±0.2/BZ OPENING A,A155.68/TP 4 4.5±0.5 3 40.54±0.2 2 5.3 (5.499) (5.999) (6.6) A 2.019±0.2 1 Pin Description TFT: Pin No. 1 2 3 4 5-12 13-20 21-28 29 30 31 32 33 34 35 36 37 38 39 40 Symbol LED-K LED-A GND VDD [R0-R7] [G0-G7] [B0-B7] GND CLKIN DISP HSD VSD DEN NC GND NC(XR) NC(YD) NC(XL) NC(YU) Connection Power Supply Power Supply Power Supply Power Supply MPU MPU MPU Power Supply MPU MPU MPU MPU MPU Power Supply - Function Description Backlight Cathode (Ground) Backlight Anode (160mA @ 9.6V) Ground Supply Voltage for LCD and logic (+3.3V) Red Data signals Green Data signals Blue Data signals Ground Clock for input data Display on/off DISP=1:Display on Line synchronization signal Frame synchronization signal Data Enable signal No Connect Ground No Connect No Connect No Connect No Connect Recommended connector: 0.5mm pitch 40-Conductor FFC. Molex p/n: 54104-4031 (top contact) Resistive Touch Panel: Pin No. 1 2 3 4 Symbol XL YD XR YU Connection Touch Controller Touch Controller Touch Controller Touch Controller Function Description Touch Panel – Left Touch Panel – Down Touch Panel – Right Touch Panel – Up Recommended connector: 1.0mm pitch 4-Conductor FFC. Molex p/n: 52207-0485 (top contact) [4] Electrical Characteristics Item Operating Temperature Range Storage Temperature Range Supply Voltage Supply Current “H” Level Input “L” Level Input “H” Level Output “L” Level Output Backlight Supply Voltage Backlight Supply Current Backlight Lifetime Symbol Top Tst VDD IDD VIH VIL VOH VOL Condition Absolute Max Absolute Max o VDD=3.3V 25 C - Min. -20 -30 3.0 60 0.7*VDD GND VDD-0.4 - Typ. 3.3 85 - Max. +70 +80 3.6 120 VDD 0.3*VDD GND+0.4 Unit ⁰C ⁰C V mA V V V V VLED ILED - VLED=9.6V ILED = 160 mA Top = 25° C 8.7 20,000 9.6 160 50,000 9.9 - V mA Hrs. Condition Min. 220 - *Backlight Lifetime is rated as Hours until half-brightness, under normal operating conditions. Optical Characteristics Optimal Viewing Angles Item Top Bottom Left Right Contrast Ratio Luminance Response Time Symbol ϕY+ ϕYθXθX+ Cr L Tr+Tf Touch Panel Characteristics Item Linearity Terminal Resistance – X-Axis Terminal Resistance – Y-Axis Insulation Resistance Operating Voltage Chattering Activation Force Pen Writing Durability Pitting Durability Surface Hardness Min. -3 50 350 20 10 100,000 1,000,000 3 Cr ≥ 10 - Typ. - Max. 3 400 1100 10 10 100 - Driver Information Typ. 75 75 75 75 400 280 25 Max. 35 Unit % Ω Ω MΩ V ms g Characters Touches H Built-in HX8264-D02 Source Driver: http://www.newhavendisplay.com/app_notes/HX8264-D02.pdf Built-in HX8664-B Gate Driver: http://www.newhavendisplay.com/app_notes/HX8664-B.pdf [5] Unit ⁰ ⁰ ⁰ ⁰ 2 cd/m ms Timing Characteristics Horizontal Timing Vertical Timing [6] Horizontal Timing Vertical Timing [7] Parallel 24-bit RGB mode Input Clock and Data Timing Source Output Timing [8] Vertical Timing HV (Cascade) Vertical Timing DE (Cascade) Gate Output Timing (Cascade) [9] Vertical Timing HV (Dual Gate) Vertical Timing DE (Dual Gate) Gate Output Timing (Dual Gate) [10] Power ON/OFF Sequence Enter/Exit Standby Mode Sequence [11] Quality Information Test Item Content of Test High Temperature storage Endurance test applying the high storage temperature for a long time. Endurance test applying the low storage temperature for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. Endurance test applying vibration to simulate transportation and use. Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature / Humidity Operation Thermal Shock resistance Vibration test Static electricity test Test Condition Endurance test applying electric static discharge. Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container. 2 -30⁰C , 96hrs 1,2 +70⁰C, 96hrs 2 -20⁰C , 96hrs 1,2 +50⁰C , 90% RH , 96hrs 1,2 -30⁰C, 30min -> 80⁰C, 30min, Change time: 5min, 10 cycles 10-55Hz , 1.5mm amplitude. 60 sec in each of 3 directions X,Y,Z For 15 minutes VS=800V, RS=1.5kΩ, CS=100pF One time Precautions for using LCDs/LCMs See Precautions at www.newhavendisplay.com/specs/precautions.pdf Warranty Information See Terms and Conditions at http://www.newhavendisplay.com/index.php?main_page=terms [12] Note +80⁰C , 96hrs 3