NHD-C0216AZ-FN-GBW

NHD-C0216AZ-FN-GBW COG (Chip-on-Glass) Liquid Crystal Display Module NHDC0216AZFNGBW- Newhaven Display COG, 2 Lines x 16 Characters Model Transflective No Backlight STN Positive Gray 6:00 Optimal View Wide Temp RoHS Compliant Newhaven Display International, Inc. 2661 Galvin Ct. Elgin IL, 60124 Ph: 847-844-8795 Fax: 847-844-8796 www.newhavendisplay.com nhtech@newhavendisplay.com nhsales@newhavendisplay.com Document Revision History Revision 0 1 2 3 4 5 6 7 8 9 Date 7/20/07 8/1/07 6/4/08 9/9/09 10/9/09 10/15/09 6/2/11 4/14/17 7/5/19 1/30/20 Description Initial Release Edit temp. range errors Edit incorrect pinout User guide reformat Updated Electrical Characteristics information Updated Block Diagram Timing characteristics updated Updated Mechanical Drawing Added PCB Footprint Drawing Glass Panel Updated Functions and Features • • • • • • 2 lines x 16 characters Built-in NT7605 controller 5x8 dots with cursor +5V power supply 1/16 duty, 1/5 bias RoHS Compliant [2] Changed by CL CL BE MC MC AK TM AS SB 1 2 3 4 5 6 SYMBOL 7 8 REVISION DATE A A 49.4±0.2 (1.85) (3.49) (3.27) 2(MAX) 0.7 0.7 0.3 Tear Tape 1 Pin assignment NO. Symbol (3.5) 0.5±0.5 Black Silicone NT7605 14 0.5±0.5 10(MAX) (A.A 11.32) (V.A 14.3 MIN) 18.3±0.2 25.3±0.2 FRONT (2) (A.A 42.86) 4.15(MIN) (V.A 45.7 MIN) C B 0.8(MAX) BACK B 1 14 Label 5.2±0.5 P1.5*13=19.5±0.1 NEWHAVEN DISPLAY PO-WWYY NHD-C0216AZ-FN-GBW_Rev1A UV Glue 1±0.05 1 2 3 4 5 6 7 8 9 10 11 12 13 14 (30) 17.95±0.25 D FRONT 0.5±0.5 2.71 2.21 0.45 0.41 0.5±0.5 0.4±0.05 F Notes: 1. Driving: 2. Voltage: 3. Display View: 4. Op�mal View: 5. Backlight: 6. Driver IC: 1 0.55 0.59 4.68 6.64 BACK E 5° 3 D E STANDARD TOLERANCE: 1/16 Duty, 1/5 Bias 5.0V VDD, 4.7V VLCD STN Gray Posi�ve / Transflec�ve 6:00 No Backlight NT7605H 4-bit / 8-bit MCU Interface 2 VSS V0 VDD RS R/W E D0 D1 D2 D3 D4 D5 D6 D7 C (UNLESS OTHERWISE SPECIFIED) LINEAR: ±0.3mm 5 6 1A NHD-C0216AZ-FN-GBW UNLESS OTHERWISE SPECIFIED: DRAWN BY: - DIMENSIONS ARE IN MILLIMETERS DRAWN DATE: - THIRD ANGLE PROJECTION 4 REVISION: DRAWING/PART NUMBER: S. Baxi 1/30/20 APPROVED BY: SIZE: A3 S. Baxi SCALE: APPROVED DATE: DO NOT SCALE DRAWING NS 1/30/20 SHEET 1 OF 1 THIS DRAWING IS SOLELY THE PROPERTY OF NEWHAVEN DISPLAY INTERNATIONAL, INC. THE INFORMATION IT CONTAINS IS NOT TO BE DISCLOSED, REPRODUCED OR COPIED IN WHOLE OR PART WITHOUT WRITTEN APPROVAL FROM NEWHAVEN DISPLAY. 7 8 F 1 2 3 4 5 6 SYMBOL A 7 8 REVISION DATE Recommended PCB Footprint A B B C C D D E E STANDARD TOLERANCE: (UNLESS OTHERWISE SPECIFIED) Applicable Displays: 1) NHD-C0216AZ-FN-GBW LINEAR: ±0.3mm DRAWN BY: - DIMENSIONS ARE IN MILLIMETERS DRAWN DATE: - THIRD ANGLE PROJECTION 1 2 3 4 5 6 1.0 NHD-C0216AZ-FN-Footprint UNLESS OTHERWISE SPECIFIED: F REVISION: DRAWING/PART NUMBER: A. Shah 7/3/19 APPROVED BY: APPROVED DATE: DO NOT SCALE DRAWING SIZE: A3 A. Khan SCALE: NS 7/3/19 SHEET 1 OF 1 THIS DRAWING IS SOLELY THE PROPERTY OF NEWHAVEN DISPLAY INTERNATIONAL, INC. THE INFORMATION IT CONTAINS IS NOT TO BE DISCLOSED, REPRODUCED OR COPIED IN WHOLE OR PART WITHOUT WRITTEN APPROVAL FROM NEWHAVEN DISPLAY. 7 8 F Pin Description and Wiring Diagram Pin No. 1 2 3 4 5 6 7-10 Symbol E DB0-DB3 11-14 DB4-DB7 VSS V0 VDD RS R/W External Connection Power Supply Adj. Power supply Power Supply MPU MPU MPU Function Description Ground Power supply for contrast (approx. 0.3V) Supply voltage for logic (5.0V) Register select signal. RS=0: Command, RS=1: Data Read/Write select signal, R/W=1: Read R/W=0: Write Operation enable signal. Falling edge triggered. Four low order bi-directional three state data bus lines. These four are not used during 4-bit operation. Four high order bi-directional three state data bus lines. Recommended LCD connector: 1.5 mm pitch, 14 pins Soldered to PCB Recommended Breakout Board: NHD-PCB40 [5] Electrical Characteristics Item Operating Temperature Range Storage Temperature Range Supply Voltage Supply Current Supply for LCD (contrast) “H” Level input “L” Level input “H” Level output “L” Level output Optical Characteristics Optimal Viewing Angles Contrast Ratio Item Top Bottom Left Right Response Time Rise Fall Symbol TOP TST VDD IDD VLCD VIH VIL VOH VOL Condition Absolute Max Absolute Max TOP =25℃, Symbol ϕY+ ϕYθXθX+ CR TR TF Condition VDD=5.0V - CR ≥ 2 TOP = 25°C Min. -20 -30 4.5 0.6 4.4 0.8 * VDD VSS VDD – 0.8 VSS Min. 2 - Typ. 5.0 1.83 4.7 - Max. +70 +80 5.5 2.8 5.0 VDD 0.2 * VDD VDD VSS + 0.4 Typ. 35 60 40 40 4 150 150 Max. 250 250 Controller Information Built-in NT7605 Controller. Please download specification at http://www.newhavendisplay.com/app_notes/NT7605.pdf DDRAM address location: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F [6] Unit ⁰C ⁰C V mA V V V V V Unit ⁰ ⁰ ⁰ ⁰ ms ms Table of Commands [7] Timing Characteristics Read Operation [8] Write Operation [9] Built-in Font Table [10] Example Initialization Program 'INIT-------------------------------------------------------------------------------A = &H30 Call Writecom 'wake up Waitms 100 Call Writecom 'wake up Waitms 10 Call Writecom 'wake up Waitms 10 A = &H38 'function set Call Writecom A = &H10 'shift display=no Call Writecom A = &H0C 'display on Call Writecom A = &H06 'entry mode set Call Writecom '-----------------------------------------------------------------------------------Sub Writecom P1 = A Reset P3.0 'instruction Reset P3.7 'RW Waitms 1 Set P3.4 'E Waitms 1 Reset P3.4 'E End Sub '-----------------------------------------------------------------------------------Sub Writedata P1 = A Set P3.0 'data Reset P3.7 'RW Waitms 1 Set P3.4 'E Waitms 1 Reset P3.4 'E End Sub '------------------------------------------------------------------------------------ [11] Quality Information Test Item High Temperature storage Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature / Humidity Operation Thermal Shock resistance Vibration test Static electricity test Content of Test Endurance test applying the high storage temperature for a long time. Endurance test applying the low storage temperature for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. Endurance test applying vibration to simulate transportation and use. Endurance test applying electric static discharge. (5 Times) Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container. Test Condition +80⁰C, 96 Hrs. 1,2 +70⁰C, 96 Hrs. 2 -20⁰C, 96 Hrs. 1,2 +50⁰C, 90% RH, 96 Hrs. 1,2 0⁰C, 30min -> 25⁰C, 5min -> 50⁰C, 30min = 1 cycle For 10 cycles 10-55Hz, 1.5mm amplitude. 60 sec in each of 3 directions X, Y, Z For 15 minutes Air: ±8KV C: 150pF Contact: ±4KV R: 330Ω See Precautions at www.newhavendisplay.com/specs/precautions.pdf Warranty Information and Terms & Conditions [12] 2 -30⁰C, 96 Hrs. Precautions for using LCDs/LCMs http://www.newhavendisplay.com/index.php?main_page=terms Note 3