NHD-C0216AZ-FSW-GBW

NHD-C0216AZ-FSW-GBW COG (Chip-on-Glass) Liquid Crystal Display Module NHDC0216AZFSWGBW- Newhaven Display COG, 2 Lines x 16 Characters Model Transflective Side White LED Backlight STN Positive, Gray 6:00 Optimal View Wide Temp RoHS Compliant Newhaven Display International, Inc. 2661 Galvin Court Elgin IL, 60124 Ph: 847-844-8795 Fax: 847-844-8796 www.newhavendisplay.com nhtech@newhavendisplay.com nhsales@newhavendisplay.com Document Revision History Revision 0 1 2 3 4 5 6 7 8 9 10 11 12 Date 2/12/07 2/19/09 10/9/09 10/15/09 6/2/11 8/14/12 9/16/14 7/15/16 3/8/17 4/14/17 3/6/18 6/24/19 2/19/20 Description Initial Release User guide reformat Updated Electrical Characteristics Updated Block Diagram Timing characteristics updated Mechanical drawing updated Electrical Characteristics updated Pin Length Modified Electrical Characteristics Mechanical Drawing & ILED Updated Supply Current Updated Added PCB Footprint Drawing Glass Panel Updated Functions and Features • • • • • • 2 lines x 16 characters Built-in NT7605 controller 5x8 dots with cursor +5V power supply 1/16 duty, 1/5 bias RoHS Compliant [2] Changed by BE MC MC AK AK ML SB SB SB SB AS SB 1 2 3 4 5 6 SYMBOL 7 8 REVISION DATE A A B/L 54.55±0.2 1 A BACK A B/L 18.3±0.2 K 5±0.2 Pin Assignment NO. Symbol Black tape 0.3 Tear Tape 1.4 1 0.5±0.5 Black Silicone 14 6.65 0.5±0.5 12.3 10(MAX) C NT7605 B LCD 2(MAX) K (8.42) FRONT (7) (A.A 42.86) 3 (A.A 11.32) (V.A 45.7 MIN) 1.5 (V.A 14.3 MIN) 0.8(MAX) 4.15(MIN) (2) LCD 25.3±0.2 (3.49) B LCD 49.4±0.2 1 UV Glue 14 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1±0.05 P1.5*13=19.5±0.1 6.3±0.5 17.95±0.25 Viewing direction FRONT 0.5±0.5 D 2.71 2.21 0.45 0.41 0.5±0.5 0.7 BACK 5° 1.2 0.55 0.59 4.68 6.64 3±0.5 3±0.5 5±0.3 0.4±0.05 E F Notes: 1. Driver: 2. Voltage: 3. Display Mode: 4. Op�mal View: 5. Backlight: 6. Driver IC: 1 1/16 Duty, 1/5 Bias 5.0V VDD, 4.7V VLCD STN Posi�ve / Gray / Transflec�ve 6:00 White LED NT7605H-BDT01 8/4-Bit MPU Interface 2 3 VSS V0 VDD RS R/W E D0 D1 D2 D3 D4 D5 D6 D7 C D E STANDARD TOLERANCE: (UNLESS OTHERWISE SPECIFIED) LINEAR: ±0.3mm 5 6 1A NHD-C0216AZ-FSW-GBW UNLESS OTHERWISE SPECIFIED: DRAWN BY: - DIMENSIONS ARE IN MILLIMETERS DRAWN DATE: - THIRD ANGLE PROJECTION 4 REVISION: DRAWING/PART NUMBER: S. Baxi 2/19/20 APPROVED BY: SIZE: A3 S. Baxi SCALE: APPROVED DATE: DO NOT SCALE DRAWING NS 2/19/20 SHEET 1 OF 1 THIS DRAWING IS SOLELY THE PROPERTY OF NEWHAVEN DISPLAY INTERNATIONAL, INC. THE INFORMATION IT CONTAINS IS NOT TO BE DISCLOSED, REPRODUCED OR COPIED IN WHOLE OR PART WITHOUT WRITTEN APPROVAL FROM NEWHAVEN DISPLAY. 7 8 F 1 2 3 4 5 6 SYMBOL A 7 8 REVISION DATE Recommended PCB Footprint A B B C C D D E E STANDARD TOLERANCE: (UNLESS OTHERWISE SPECIFIED) Applicable Displays: 1) NHD-C0216AZ-FSW-GBW LINEAR: ±0.3mm DRAWN BY: - DIMENSIONS ARE IN MILLIMETERS DRAWN DATE: - THIRD ANGLE PROJECTION 1 2 3 4 5 6 1.0 NHD-C0216AZ-Footprint UNLESS OTHERWISE SPECIFIED: F REVISION: DRAWING/PART NUMBER: A. Shah 6/4/19 APPROVED BY: APPROVED DATE: DO NOT SCALE DRAWING SIZE: A3 A. Khan SCALE: NS 6/4/19 SHEET 1 OF 1 THIS DRAWING IS SOLELY THE PROPERTY OF NEWHAVEN DISPLAY INTERNATIONAL, INC. THE INFORMATION IT CONTAINS IS NOT TO BE DISCLOSED, REPRODUCED OR COPIED IN WHOLE OR PART WITHOUT WRITTEN APPROVAL FROM NEWHAVEN DISPLAY. 7 8 F Pin Description and Wiring Diagram Pin No. 1 2 3 4 5 6 7-10 Symbol VSS V0 VDD Rs R/W E DB0-DB3 External Connection Power Supply Adj. Power supply Power Supply MPU MPU MPU 11-14 15 16 DB4-DB7 A K MPU MPU Power Supply Function Description Ground Supply Voltage for contrast (approx. 0.3V) Supply voltage for logic (5.0V) Register Select signal. RS=0: Command, RS=1: Data Read/Write select signal, R/W=1: Read R/W=0: Write Operation Enable signal. Falling edge triggered. Four low order bi-directional three state data bus lines. These four are not used during 4-bit operation. Four high order bi-directional three state data bus lines. Power supply for LED Backlight (3.0V) Ground for Backlight Recommended LCD connector: 1.5 mm pitch, 14 pins Soldered to PCB Backlight connector: A and K pins Mates with: Solder to wires or PCB Recommended Breakout Board: NHD-PCB40 [5] Electrical Characteristics Item Operating Temperature Range Storage Temperature Range Supply Voltage Supply Current Supply for LCD (contrast) “H” Level input “L” Level input “H” Level output “L” Level output Backlight Supply Current Backlight Supply Voltage Symbol TOP TST VDD IDD VLCD VIH VIL VOH VOL Condition Absolute Max Absolute Max VDD = 5.0V TOP = 25°C - Min. -20 -30 4.5 0.6 4.4 0.8 * VDD VSS VDD – 0.6 VSS Typ. 5.0 2 4.7 - Max. +70 +80 5.5 3 5.0 VDD 0.2 * VDD VDD VSS + 0.6 Unit °C °C V mA V V V V V ILED ILED ILED = 15 mA 2.8 15 3.0 23 3.2 mA mA Symbol ϕY+ ϕYθXθX+ CR TR TF Condition Min. 2 - Typ. 35 60 40 40 6 150 150 Max. 250 250 *The LED of the backlight is driven by current drain; drive voltage is for reference only. Drive voltage must be selected to ensure backlight current drain is below MAX level stated. Optical Characteristics Optimal Viewing Angles Contrast Ratio Item Top Bottom Left Right Response Time Rise Fall CR ≥ 2 TOP = 25°C Controller Information Built-in NT7605 Controller. Please download specification at http://www.newhavendisplay.com/app_notes/NT7605.pdf DDRAM Address 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F [6] Unit ° ° ° ° ms ms Table of Commands [7] Timing Characteristics Write Operation [8] Read Operation [9] Built-in Font Table [10] Example Initialization Program 'INIT-------------------------------------------------------------------------------A = &H30 Call Writecom 'wake up Waitms 100 Call Writecom 'wake up Waitms 10 Call Writecom 'wake up Waitms 10 A = &H38 'function set Call Writecom A = &H10 'shift display=no Call Writecom A = &H0C 'display on Call Writecom A = &H06 'entry mode set Call Writecom '-----------------------------------------------------------------------------------Sub Writecom P1 = A Reset P3.0 'instruction Reset P3.7 'RW Waitms 1 Set P3.4 'E Waitms 1 Reset P3.4 'E End Sub '-----------------------------------------------------------------------------------Sub Writedata P1 = A Set P3.0 'data Reset P3.7 'RW Waitms 1 Set P3.4 'E Waitms 1 Reset P3.4 'E End Sub '------------------------------------------------------------------------------------ [11] Quality Information Test Item High Temperature storage Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature / Humidity Operation Thermal Shock resistance Vibration test Static electricity test Content of Test Endurance test applying the high storage temperature for a long time. Endurance test applying the low storage temperature for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. Endurance test applying vibration to simulate transportation and use. Endurance test applying electric static discharge. Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container. Test Condition +80⁰C , 48hrs 1,2 +70⁰C , 48hrs 2 -20⁰C , 48hrs 1,2 +40⁰C , 90% RH , 48hrs 1,2 0⁰C,30min -> 25⁰C,5min -> 50⁰C,30min = 1 cycle 10 cycles 10-55Hz , 15mm amplitude. 60 sec in each of 3 directions X,Y,Z For 15 minutes VS=800V, RS=1.5kΩ, CS=100pF One time See Precautions at www.newhavendisplay.com/specs/precautions.pdf Warranty Information and Terms & Conditions [12] 2 -30⁰C , 48hrs Precautions for using LCDs/LCMs http://www.newhavendisplay.com/index.php?main_page=terms Note 3