NHD-C0216CU-FSW-GBW-3V3

NHD-C0216CU-FSW-GBW-3V3 COG (Chip-on-Glass) Liquid Crystal Display Module NHDC0216CUFSWGBW3V3- Newhaven Display COG, 2 Lines x 16 Characters Model Transflective Side White LED Backlight STN Positive, Gray 6:00 Optimal View Wide Temp 3VDD, 3.2V Backlight RoHS Compliant Newhaven Display International, Inc. 2661 Galvin Ct. Elgin IL, 60124 Ph: 847-844-8795 Fax: 847-844-8796 www.newhavendisplay.com nhtech@newhavendisplay.com nhsales@newhavendisplay.com Document Revision History Revision 0 1 2 3 4 5 6 7 8 9 10 11 Date 8/29/08 9/10/09 10/9/09 10/22/09 11/19/09 8/5/10 5/17/11 7/26/12 5/18/16 2/17/17 6/24/19 9/4/19 Description Initial Release User guide reformat Updated Electrical Characteristics Mechanical Drawing dimensions added Updated backlight current Electrical Characteristics Update Updated Pin Description Mechanical drawing updated Mechanical Drawing, Electrical and Optical Char. Updated Backlight Characteristics Updated Added PCB Footprint Drawing Mechanical Drawing, Footprint & Current Updated Functions and Features • • • • • • • 2 lines x 16 characters Built-in ST7032-0D controller +3.0V power supply 8-bit parallel data input from MPU 1/16 duty, 1/5 bias No CGRAM available RoHS Compliant [2] Changed by BE MC BE MC MP BE AK SB SB AS SB 1 2 3 4 5 6 SYMBOL 7 8 REVISION DATE A A B B NEWHAVEN DISPLAY NHD-C0216CU-FSW-GBW-3V3 WW/YY C C D D E E F Notes: 1. Driver: 2. Voltage: 3. Display Mode: 4. Op�mal View: 5. Backlight: 6. Driver IC: 1 1/16 Duty, 1/5 Bias 3V VDD, 5V VLCD STN Posi�ve / Gray / Transflec�ve 6:00 White LED ST7032i-0D - 8/4 Bit Parallel Interface 2 3 STANDARD TOLERANCE: (UNLESS OTHERWISE SPECIFIED) LINEAR: ±0.3mm 5 6 1.0 NHD-0216CU-FSW-GBW-3V3 UNLESS OTHERWISE SPECIFIED: DRAWN BY: - DIMENSIONS ARE IN MILLIMETERS DRAWN DATE: - THIRD ANGLE PROJECTION 4 REVISION: DRAWING/PART NUMBER: S. Baxi 9/5/19 APPROVED BY: SIZE: A3 S. Baxi SCALE: APPROVED DATE: DO NOT SCALE DRAWING NS 9/5/19 SHEET 1 OF 1 THIS DRAWING IS SOLELY THE PROPERTY OF NEWHAVEN DISPLAY INTERNATIONAL, INC. THE INFORMATION IT CONTAINS IS NOT TO BE DISCLOSED, REPRODUCED OR COPIED IN WHOLE OR PART WITHOUT WRITTEN APPROVAL FROM NEWHAVEN DISPLAY. 7 8 F 1 2 3 4 5 6 SYMBOL A 7 8 REVISION DATE Recommended PCB Footprint A B B C C D D E E STANDARD TOLERANCE: (UNLESS OTHERWISE SPECIFIED) LINEAR: ±0.3mm F Applicable Displays: 1) NHD-C0216CU-FSW-GBW-3V3 1 DRAWING/PART NUMBER: UNLESS OTHERWISE SPECIFIED: DRAWN BY: - DIMENSIONS ARE IN MILLIMETERS DRAWN DATE: - THIRD ANGLE PROJECTION 2 3 4 5 6 SIZE: NHD-C0216CU-Footprint S. Baxi 9/5/19 APPROVED BY: APPROVED DATE: DO NOT SCALE DRAWING A3 SCALE: S. Baxi NS 9/5/19 SHEET 1 OF 1 THIS DRAWING IS SOLELY THE PROPERTY OF NEWHAVEN DISPLAY INTERNATIONAL, INC. THE INFORMATION IT CONTAINS IS NOT TO BE DISCLOSED, REPRODUCED OR COPIED IN WHOLE OR PART WITHOUT WRITTEN APPROVAL FROM NEWHAVEN DISPLAY. 7 8 F Pin Description and Wiring Diagram Pin No. 1 2 3 4 5-12 13 14 15 16 Symbol XRESET RS R/W E DB0-DB7 VSS VDD VOUT CAP1P External Connection MPU MPU MPU MPU MPU 17 CAP1N A LED+ Power Supply Power supply for Backlight (20mA) K LED- Power Supply Backlight Ground Power Supply Function Description Active LOW Reset Signal Register Select signal. RS=0: instruction; RS=1: data Read/Write select signal, R/W=1: Read R/W: =0: Write Operation Enable signal. Falling edge triggered. 8-bit bi-directional data bus lines Ground Supply Voltage for logic for LCD (+3.0V) DC/DC voltage converter. Connect to 1uF capacitor to VDD Voltage booster circuit. Connect to 0.47uF-2.2uF cap to PIN17. Voltage booster circuit. Connect to 0.47uF-2.2uF cap to PIN16. Recommended LCD connector: 1.5mm pitch pins, solder to PCB Backlight connector: --- Mates with: - -Recommended Breakout Board: NHD-PCB40 [5] Electrical Characteristics Item Operating Temperature Range Storage Temperature Range Supply Voltage Supply Current Supply for LCD (contrast) “H” Level input “L” Level input “H” Level output “L” Level output Backlight Supply Current* Backlight Voltage Symbol TOP TST VDD IDD VLCD VIH VIL VOH VOL Condition Absolute Max Absolute Max VDD = 3.0V TOP = 25°C - Min. -20 -30 2.7 150 4.7 0.7 * VDD VSS 0.75 * VDD VSS Typ. 3.0 300 5.0 - Max. +70 +80 3.5 600 5.3 VDD 0.2 * VDD VDD 0.8 Unit ⁰C ⁰C V µA V V V V V ILED VLED ILED = 20mA 2.8 20 3.2 25 3.4 mA V Symbol ϕY+ ϕYθXθX+ CR TR TF Condition Min. 2 - Typ. 30 40 40 40 5 90 110 Max. 100 180 Unit ° ° ° ° ms ms *Backlight is current driven; do not supply more than 30 mA. Luminance is directly related to Backlight Supply Current. Optical Characteristics Optimal Viewing Angle Contrast Ratio Item Top Bottom Left Right Response Time Rise Fall CR ≥ 2 TOP = 25°C Controller Information Built-in ST7032 Controller. Please download specification at http://www.newhavendisplay.com/app_notes/ST7032.pdf DDRAM Address 1 00 40 2 01 41 3 02 42 4 03 43 5 04 44 6 05 45 7 06 46 8 07 47 9 08 48 10 09 49 11 0A 4A 12 0B 4B [6] 13 0C 4C 14 0D 4D 15 0E 4E 16 0F 4F Table of Commands [7] Timing Characteristics [8] Built-in Font Table [9] Example Initialization Program /********************************************************************************/ /********************************************************************************/ void init() //initialize the LCD { P3 = 1; P1 = 1; RST = 0; delay(2); RST = 1; delay(20); Writecom(0x30); delay(2); Call writecom(0x30); Call writecom(0x30); Call writecom(0x39); Call writecom(0x14); Call writecom(0x56); Call writecom(0x6D); //RESET //end reset //wake up //wake up //wake up //function set //internal osc frequency //power control //follower control Call writecom(0x70); //contrast Call writecom(0x0C); //display on Call writecom(0x06); //entry mode Call writecom(0x01); //clear delay(10); } /********************************************************************************/ void writecom(int c) { RW = 0; //Write RS = 0; //Command E = 1; P1 = c; E = 0; } /********************************************************************************/ void writedata(int d) { RW = 0; //Write RS = 1; //Data E = 1; P1 = d; E = 0; } /********************************************************************************/ /********************************************************************************/ [10] Quality Information Test Item High Temperature storage Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature / Humidity Operation Thermal Shock resistance Vibration test Static electricity test Content of Test Endurance test applying the high storage temperature for a long time. Endurance test applying the low storage temperature for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. Endurance test applying vibration to simulate transportation and use. Endurance test applying electric static discharge. Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container. Test Condition +80⁰C , 240hrs 1,2 +70⁰C , 240hrs 2 -20⁰C , 240hrs 1,2 +40⁰C , 90% RH , 240hrs 1,2 -20⁰C,30min -> 25⁰C,5min -> 70⁰C,30min = 1 cycle 10 cycles 10-55Hz , 15mm amplitude. 60 sec in each of 3 directions X,Y,Z For 10 minutes VS=800V, RS=1.5kΩ, CS=100pF One time See Precautions at www.newhavendisplay.com/specs/precautions.pdf Warranty Information and Terms & Conditions [11] 2 -30⁰C , 240hrs Precautions for using LCDs/LCMs http://www.newhavendisplay.com/index.php?main_page=terms Note 3