NHD-C12864A1Z-FSW-FBW-HTT

NHD-C12864A1Z-FSW-FBW-HTT COG (Chip-On-Glass) Liquid Crystal Display Module NHDC12864A1ZFSWFBWHTT- Newhaven Display 128 x 64 Pixels Model Transflective Side White LED Backlight FSTN, Positive 6:00 Optimal View Wide Temp With 12V Heater (-40°C to +70°C) RoHS Compliant Newhaven Display International, Inc. 2661 Galvin Ct. Elgin IL, 60124 Ph: 847-844-8795 Fax: 847-844-8796 www.newhavendisplay.com nhtech@newhavendisplay.com nhsales@newhavendisplay.com Document Revision History Revision 0 1 2 3 4 5 6 Date 7/17/08 9/28/09 10/14/09 11/20/09 10/26/10 10/27/10 08/31/15 7 8 9 10 8/3/2016 9/23/16 3/30/17 12/20/18 11 12 13 14 15 3/21/19 5/14/19 5/23/19 6/4/19 1/24/20 16 17 7/16/20 10/9/20 18 19 3/26/21 4/8/21 Description Initial Release User guide reformat Updated Electrical Characteristic Updated backlight supply current Updated backlight current Supply current updated Electrical characteristics, Optical characteristics, Mechanical drawings updated Updated Electrical Characteristics and Quality Info Updated Electrical Characteristics Updated Electrical Characteristics Updated Heater Resistance, Response time & Double-Sided Tape added to drawing Heater Resistance Updated Heater Resistance Modified, Backlight Current Updated Heater Note Added Added PCB Footprint Drawing Heater Resistance, Backlight Design & Electrical Characteristics Updated Updated Serial Interface Timing Characteristics Updated LCD Contrast Range from 8.7V/9.0V/9.3V to 8.8V/9.0V/9.2V Part Revision Upgraded to Rev1D Updated MIN Backlight Current & MAX Supply Voltage Updated the Electrical, Optical Characteristics, Table of Commands, Quality Information and Mechanical Drawing Functions and Features • • • • • • 128 x 64 pixels Built-in ST7565P controller +3.0V power supply 1/65 duty cycle; 1/9 bias Built-in Heater RoHS Compliant [2] Changed by BE MC MC BE BE SB TM TM TM SB SB SB SB AS SB AS AS AS JT 1 A 2 Mechanical Drawing 3 4 5 6 SYMBOL 7 8 REVISION DATE A B B C C D D E F Notes: 1. Driving: 2. Voltage: 3. Display Type: 4. Op�mal View 5. Backlight: 6. Driver IC: 7. Built-in Heater 1 E 1/65 duty, 1/9 bias 3.0V VDD, 9V VLCD FSTN Posi�ve / Transflec�ve 6:00 White Edge light LED` ST7565P 2-Line SPI Interface 2 3 STANDARD TOLERANCE: (UNLESS OTHERWISE SPECIFIED) LINEAR: ±0.3mm PCB HOLE Sec�on 4 5 NHD-C12864A1Z-FSW-FBW-HTT UNLESS OTHERWISE SPECIFIED: DRAWN BY: - DIMENSIONS ARE IN MILLIMETERS DRAWN DATE: 6 J.Thomas 4/8/21 - THIRD ANGLE PROJECTION Backlight PCB(PCB Back) REVISION: DRAWING/PART NUMBER: APPROVED BY: A3 J.Thomas SCALE: APPROVED DATE: DO NOT SCALE DRAWING 1E SIZE: NS 4/8/21 SHEET 1 OF 1 THIS DRAWING IS SOLELY THE PROPERTY OF NEWHAVEN DISPLAY INTERNATIONAL, INC. THE INFORMATION IT CONTAINS IS NOT TO BE DISCLOSED, REPRODUCED OR COPIED IN WHOLE OR PART WITHOUT WRITTEN APPROVAL FROM NEWHAVEN DISPLAY. 7 8 F [4] Pin Description and Wiring Diagram Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 Symbol SCL SI VDD A0 /RESET /CS VSS H H LEDLED+ NC External Connection MPU MPU Power Supply MPU MPU MPU Power Supply Power Supply Power Supply Power Supply Power Supply - Function Description Serial Clock input Serial Data input Supply Voltage for LCD and logic (+3.0V) Register Select. 0: instruction; 1: data Operation Active LOW Reset signal Active LOW Chip Select Signal Ground Heater Connection (+12V) Heater Connection (GND) Backlight Cathode (Ground) Backlight Anode (+3.3V) No Connect Recommended LCD connector: 2.54mm pitch thru-hole connection on PCB Backlight connector: --Mates with: --Recommended Breakout Board: NHD-PCB40 [5] Electrical Characteristics Item Symbol Operating Temperature Range1 TOP Storage Temperature Range Supply Voltage Supply Current Supply for LCD (contrast) “H” Level input “L” Level input “H” Level output “L” Level output TST VDD IDD VLCD VIH VIL VOH VOL Condition VH = 0V VH = 12.0V VDD = 3.0V TOP = 25°C - Min. -20 -40 -40 2.8 0.1 8.8 0.8*VDD 0 0.8*VDD VSS Typ. 3.0 0.2 9.0 - Max. +70 +70 +80 3.2 1.0 9.2 VDD 0.2*VDD VDD 0.2*VDD Unit °C °C °C V mA V V V V V Backlight Supply Voltage Backlight Supply Current VLED ILED VLED = 3.3V 3.2 20 3.3 50 3.4 60 V mA Heater Panel Resistance2 Heater Voltage Supply RH+/VH T = 25°C - 5 - 20 12 35 15 Ω V 1 Heater MUST be activated when operating temperature drops below -20°C 2 Heater measured using digital multi-meter Optical Characteristics Optimal Viewing Angles Item Top Bottom Left Right Contrast Ratio Response Time Rise Fall Rise Fall Symbol ϕY+ ϕYθXθX+ CR TR TF TR TF Condition CR ≥ 3 TOP = 25°C TOP = -40°C VH = 12V Min. 2 - Typ. 20 40 40 40 4 135 235 7.3 6.7 Controller Information Built-in ST7565P controller. Please download specification at https://www.newhavendisplay.com/resources_dataFiles/datasheets/LCDs/ST7565P.pdf [6] Max. 10 240 325 - Unit ° ° ° ° ms ms s s Timing Characteristics [7] Table of Commands [8] Example Initialization Program '''''''''''''''''''''''''''''''''''''''''''''''''''''''''' Sub Command Reset P3.7 Reset P3.4 For Writecount = 1 To 8 Rotate A , Left , 1 Reset P3.1 P1 = A Set P3.1 Next Writecount Set P3.7 End Sub '''''''''''''''''''''''''''''''''''''''''''''''''''''''''' Sub Write Reset P3.7 Set P3.4 For Writecount = 1 To 8 Rotate A , Left , 1 Reset P3.1 P1 = A Set P3.1 Next Writecount Set P3.7 End Sub '''''''''''''''''''''''''''''''''''''''''''''''''''''''''' Sub Init Waitms 100 A = &HA0 Call Command A = &HAE Call Command A = &HC0 Call Command A = &HA2 Call Command A = &H2F Call Command A = &H26 Call Command A = &H81 Call Command A = &H11 Call Command A = &HAF Call Command End Sub '''''''''''''''''''''''''''''''''''''''''''''''''''''''''' [9] Quality Information Test Item Content of Test High Temperature storage Endurance test applying the high storage temperature for a long time. Endurance test applying the low storage temperature for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. Endurance test applying vibration to simulate transportation and use. Endurance test applying electric static discharge. Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature / Humidity Operation Thermal Shock resistance Vibration test Static electricity test Test Condition 2 -40⁰C , 96hrs 1,2 +70⁰C , 96hrs 2 -40⁰C /-20°C, 96hrs 1,2 +50⁰C , 90% RH , 96hrs 1,2 -40⁰C /-20°C , 60min --> 70⁰C , 60min = 1 cycle For 20 cycles 10-50Hz , Acceleration of Gravity:5G 30 min in each of 3 directions X,Y,Z Air: ±8kV 150pF/330Ω, 5 Times Contact: ±4kV 150pF/330Ω, 5 Times 3 Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container. Precautions for using LCDs/LCMs See Precautions at www.newhavendisplay.com/specs/precautions.pdf Warranty Information and Terms & Conditions http://www.newhavendisplay.com/index.php?main_page=terms [10] Note +80⁰C , 96hrs