NHD-C12864AZ-FSY-YBW-HT 数据手册
NHD‐C12864AZ‐FSY‐YBW‐HT
COG (Chip‐On‐Glass) Liquid Crystal Display Module
NHD‐ C12864‐ AZ‐ F‐ SY‐ Y‐ B‐ W‐ HT‐ Newhaven Display 128 x 64 pixels Model Transflective Side Yellow/Green LED Backlight STN‐ Yellow/Green 6:00 view Wide Temp (‐20°C ~ +70°C) With 12V Heater (‐40°C~ +70°C) RoHS Compliant
Newhaven Display International, Inc.
2511 Technology Drive, Suite 101 Elgin IL, 60124 Ph: 847‐844‐8795 Fax: 847‐844‐8796
www.newhavendisplay.com nhtech@newhavendisplay.com nhsales@newhavendisplay.com [1]
Document Revision History
Revision 0 1 2 3 • • • • • • Date 9/28/2007 10/5/2009 10/14/2009 11/19/2009 Description Initial Release User guide reformat Updated Electrical Characteristics Updated backlight supply current maximum Changed by ‐ BE MC MC
Functions and Features
128 x 64 pixels Built‐in ST7565P controller +3.3V power supply 1/65 duty cycle; 1/9 bias Built‐in Heater RoHS Compliant
[2]
Mechanical Drawing
1 2 3 4
REV
1
DESCRIPTION:
5
DATE
6
Heat panel connect
2007-1-31
A
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 VSS VDD V0 /RES /CS A0 VDD VDD VDD VDD VDD VDD VDD VDD SCL SI A K
A
PIN ASSIGNMENT
B
B
C
18 1
C
D
Model Name:
GENERAL TOL:
NHD-C12864AZ-FSY-YBW-HT
± 0.2 DATE
Newhaven Display
DRAWN NO. SCALE: UNIT:
D
APPROVALS DWN: Qiqei Qiu CHK: APP: Guoxiang Ye
1:1
Page:
SIZE:
A4
1
2
3
4
5
6
mm
1-1
Pin Description and Wiring Diagram
Pin No. Symbol 1 2 3 4 5 6 7‐14 15 16 17 18 VSS VDD NC /RES /CS A0 VDD SCL SI A K External Connection Power Supply Power Supply ‐ MPU MPU MPU Power Supply MPU MPU Power Supply Power Supply Function Description Ground Power Supply for LCD and logic (+3.3V) No Connect Operation Active LOW Reset signal Active LOW Chip Select Signal Register Select. 0: instruction; 1: data Power Supply for LCD and logic (+3.3V) Serial clock Input Serial data Input Power supply for backlight (+5V with on‐board 6.8ohm) Ground for backlight
Recommended LCD connector: 1.0mm Pitch pins. Molex p/n: 52271‐1879 Backlight connector: ‘A’ and ‘K’ pins on the LCD connector Mates with: ‐‐‐ Heater connector: SDA 43645‐0200 Mates with: SDA 43640‐0200
[4]
Electrical Characteristics
Item Operating Temperature Range Storage Temperature Range Supply Voltage Supply Current Supply for LCD (contrast) “H” Level input “L” Level input “H” Level output “L” Level output Backlight Supply Voltage Backlight Supply Current Heater panel resistance Heater Voltage Supply Heater Current Symbol TOP TST VDD IDD VDD‐V0 Vih Vil Voh Vol VLED ILED RH+/‐ VH IH Condition Absolute Max Absolute Max Ta=25°C, VDD=3.3V Ta=25°C Min. ‐20 ‐30 2.4 ‐ 8.3 2.2 0 2.4 ‐ ‐ ‐ ‐ ‐ ‐ Typ. ‐ ‐ 3.3 ‐ 8.7 ‐ ‐ ‐ ‐ 4.2 80 20 12V 1 Max. +70 +80 3.3 147 9.3 VDD 0.6 ‐ 0.4 ‐ 130 25 ‐ ‐ Unit ⁰C ⁰C V uA V V V V V V mA Ω V A
VLED=4.2V
VH=12.0V
Optical Characteristics
Item Viewing Angle ‐ Vertical Viewing Angle ‐ Horizontal Contrast Ratio Response Time (rise) Response Time (fall) Symbol θ Φ CR Tr Tf Condition CR 2 CR 2 Min. ‐60 ‐40 ‐ ‐ ‐ Typ. ‐ ‐ 6 150 150 Max. +35 +40 ‐ 250 250 Unit ⁰ ⁰ ‐ ms ms
Heater Circuit Example:
Controller Information
Built‐in ST7565P. Download specification at http://www.newhavendisplay.com/app_notes/ST7565.pdf [5]
Timing Characteristics
[6]
Table of Commands
[7]
Example Initialization Program
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''' Sub Command Reset P3.7 Reset P3.4 For Writecount = 1 To 8 Rotate A , Left , 1 Reset P3.1 P1 = A Set P3.1 Next Writecount Set P3.7 End Sub '''''''''''''''''''''''''''''''''''''''''''''''''''''''''' Sub Write Reset P3.7 Set P3.4 For Writecount = 1 To 8 Rotate A , Left , 1 Reset P3.1 P1 = A Set P3.1 Next Writecount Set P3.7 End Sub '''''''''''''''''''''''''''''''''''''''''''''''''''''''''' Sub Init Waitms 100 A = &HA0 Call Command A = &HAE Call Command A = &HC0 Call Command A = &HA2 Call Command A = &H2F Call Command A = &H26 Call Command A = &H81 Call Command A = &H11 Call Command A = &HAF Call Command End Sub ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
[8]
Quality Information
Test Item
High Temperature storage Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature / Humidity Operation Thermal Shock resistance
Content of Test
Endurance test applying the high storage temperature for a long time. Endurance test applying the low storage temperature for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. Endurance test applying vibration to simulate transportation and use.
Test Condition
+80⁰C , 48hrs ‐30⁰C , 48hrs +70⁰C 48hrs
Note
2 1,2 2
‐20⁰C , 48hrs
1,2
+40⁰C , 90% RH , 48hrs
1,2
Vibration test
Static electricity test
Endurance test applying electric static discharge.
‐0⁰C,30min ‐> 25⁰C,5min ‐> 50⁰C,30min = 1 cycle 10 cycles 10‐55Hz , 15mm amplitude. 60 sec in each of 3 directions X,Y,Z For 15 minutes VS=800V, RS=1.5kΩ, CS=100pF One time
3
Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container.
Precautions for using LCDs/LCMs
See Precautions at www.newhavendisplay.com/specs/precautions.pdf
Warranty Information and Terms & Conditions
http://www.newhavendisplay.com/index.php?main_page=terms
[9]
NHD-C12864AZ-FSY-YBW-HT 价格&库存
很抱歉,暂时无法提供与“NHD-C12864AZ-FSY-YBW-HT”相匹配的价格&库存,您可以联系我们找货
免费人工找货