NHD-C12864M1R-FSW-FTW-3V6 数据手册
NHD-C12864M1R-FSW-FTW-3V6
COG (Chip-On-Glass) Liquid Crystal Display Module
NHDC12864M1RFSWFTW3V6-
Newhaven Display
128 x 64 pixels
Model
Transflective
Side White LED Backlight
FSTN (+)
12:00 Optimal View
Wide Temperature
3.3V LCD, 6.0V Backlight
RoHS Compliant
Newhaven Display International, Inc.
2661 Galvin Dr.
Elgin IL, 60124
Ph: 847-844-8795
Fax: 847-844-8796
www.newhavendisplay.com
nhtech@newhavendisplay.com
nhsales@newhavendisplay.com
Document Revision History
Revision
0
1
2
3
4
5
6
7
8
Date
5/6/2009
10/13/2009
11/20/2009
6/22/2010
2/3/2011
2/13/2011
3/28/2011
1/20/2014
10/9/18
Description
Initial Release
User guide reformat
Updated backlight supply current
Updated drawing to include Backlight Adhesive
Updated drawing with pin numbers
Change controller to ST7565R
Controller information updated
Mechanical drawing, Electrical characteristics updated
Backlight Drive Method Updated
Changed by
MC
MC
CL
AK
CL
AK
AK
SB
Functions and Features
• 128 x 64 pixels
• 8080 or 6800 MPU interface
• Built-in ST7565R controller
• +3.3V power supply
• 1/64 duty cycle; 1/9 bias
• RoHS Compliant
• 3M 9080 adhesive on backlight assembly
http://multimedia.3m.com/mws/mediawebserver?66666UuZjcFSLXTt4XfEnxfyEVuQEcuZgVs6EVs6E666666--
[2]
1
2
3
4
5
6
SYMBOL
7
8
REVISION
DATE
A
A
B
B
C
C
D
D
E
F
Notes:
1. Driver:
2. Display Mode:
3. Optimal View:
4. Voltage:
5. Backlight:
6. Driver IC:
1
E
1/65 Duty, 1/9 Bias
FSTN Positive / Transflective
12:00
3.3V VDD, 9.5V VLCD
White LED
ST7565
2
3
STANDARD TOLERANCES
(UNLESS OTHERWISE SPECIFIED)
LINEAR:
±0.3 mm
XX.
±0.3 mm
XX.X
XX.XX ±0.3 mm
UNLESS OTHERWISE SPECIFIED
- DIMENSIONS ARE IN MILLIMETERS
5
6
1.0
NHD-C12864M1R-FSW-FTW-3V6
DRAWN BY:
CHECKED BY:
S. Baxi
DRAWN DATE:
S. Baxi
10/09/18
- THIRD ANGLE PROJECTION
4
REVISION:
DRAWING/PART NUMBER:
CHECKED DATE:
10/09/18
DO NOT SCALE DRAWING
SIZE:
A3
APPROVED BY:
S. Baxi
SCALE:
APPROVED DATE:
10/09/18
NS
SHEET 1 OF 2
THIS DRAWING IS SOLELY THE PROPERTY OF NEWHAVEN DISPLAY INTERNATIONAL, INC.
THE INFORMATION IT CONTAINS IS NOT TO BE DISCLOSED, REPRODUCED OR COPIED IN
WHOLE OR PART WITHOUT WRITTEN APPROVAL FROM NEWHAVEN DISPLAY.
7
8
F
1
2
3
4
5
6
SYMBOL
7
8
REVISION
DATE
A
A
B
B
C
C
D
D
Double Sided Tape: t=0.1
E
E
STANDARD TOLERANCES
(UNLESS OTHERWISE SPECIFIED)
LINEAR:
±0.3 mm
XX.
±0.3 mm
XX.X
XX.XX ±0.3 mm
UNLESS OTHERWISE SPECIFIED
- DIMENSIONS ARE IN MILLIMETERS
F
2
3
4
5
6
1.0
NHD-C12864M1R-FSW-FTW-3V6
DRAWN BY:
CHECKED BY:
S. Baxi
DRAWN DATE:
S. Baxi
10/09/18
- THIRD ANGLE PROJECTION
1
REVISION:
DRAWING/PART NUMBER:
CHECKED DATE:
10/09/18
DO NOT SCALE DRAWING
SIZE:
A3
APPROVED BY:
S. Baxi
SCALE:
APPROVED DATE:
10/09/18
NS
SHEET 2 OF 2
THIS DRAWING IS SOLELY THE PROPERTY OF NEWHAVEN DISPLAY INTERNATIONAL, INC.
THE INFORMATION IT CONTAINS IS NOT TO BE DISCLOSED, REPRODUCED OR COPIED IN
WHOLE OR PART WITHOUT WRITTEN APPROVAL FROM NEWHAVEN DISPLAY.
7
8
F
Pin Description and Wiring Diagram
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Symbol
/CS1
/RES
A0
R/W
/WR
E
/RD
DB0
DB1
DB2
DB3
DB4
DB5
DB6 (SCL)
DB7 (SI)
VDD
VSS
VOUT
CAP3CAP1+
CAP1CAP2CAP2+
V1
V2
V3
V4
V5
VR
C86
PS
/IRS
External Connection
MPU
MPU
MPU
MPU
MPU
MPU
MPU
MPU
MPU
MPU
MPU
MPU
MPU
Power Supply
Power Supply
Power Supply
Power Supply
Power Supply
Power Supply
Power Supply
Power Supply
Power Supply
Power Supply
Power Supply
Power Supply
Power Supply
MPU
MPU
MPU
Function Description
Active LOW Chip Select
Active LOW Reset signal
Register Select signal. 0: instruction; 1: data register
6800 Mode: Read/Write select signal. R/W=1: Read R/W: =0: Write
8080 Mode: Active LOW Write Signal
6800 Mode: Active HIGH Enable Signal
8080 Mode: Active LOW Read Signal
Parallel Interface
DB0-DB7: Bi-directional 8-bit data bus
Serial Interface:
DB0-DB5: No connect in serial mode
DB6= Serial clock (SCL)
DB7= Serial data input (SI)
Power supply for LCD and logic (+3.3V)
Ground
Connect to 1uF cap to VSS
Connect to 1uF cap to CAP1+ (PIN-18)
Connect to 1uF cap to CAP3-(PIN17) and CAP1-(PIN19)
Connect to 1uF cap to CAP1+ (PIN-18)
Connect to 1uF cap to CAP2+ (PIN-21)
Connect to 1uF cap to CAP2- (PIN-20)
1.0uF-2.2uF cap to VSS
1.0uF-2.2uF cap to VSS
1.0uF-2.2uF cap to VSS
1.0uF-2.2uF cap to VSS
1.0uF-2.2uF cap to VSS
No Connect
Select MPU interface pin. C86=H: 6800; C86=L: 8080
Parallel/Serial select. PS= H: Parallel; PS=L: Serial
Internal resistor select. Set HIGH to use internal resistors
Recommended LCD connector: 0.5mm Pitch, 30 pin FFC. Molex p/n: 52892-3095
Backlight connector: -Mates with: --
[5]
Electrical Characteristics
Item
Operating Temperature Range
Storage Temperature Range
Supply Voltage
Supply Current
Supply for LCD (contrast)
“H” Level input
“L” Level input
“H” Level output
“L” Level output
Backlight Supply Current
Backlight Supply Voltage
Symbol
TOP
TST
VDD
IDD
VLCD
VIH
VIL
VOH
VOL
Condition
Absolute Max
Absolute Max
VDD = 3.3V
TOP = 25°C
-
Min.
-20
-30
3.0
9.2
0.8 * VDD
VSS
0.8 * VDD
VSS
Typ.
3.3
0.25
9.5
-
Max.
+70
+80
3.6
0.50
9.8
VDD
0.2 * VDD
VDD
0.2 * VDD
Unit
°C
°C
V
mA
V
V
V
V
V
ILED
VLED
ILED = 40mA
5.7
40
6.1
50
6.5
mA
V
Symbol
ϕY+
ϕYθXθX+
CR
TR
TF
Condition
Optical Characteristics
Optimal
Viewing
Angles
Item
Top
Bottom
Left
Right
Contrast Ratio
Response Time
Rise
Fall
CR ≥ 2
TOP = 25°C
Min.
2
-
Typ.
40
20
40
40
4
150
150
Max.
250
250
Controller Information
Built-in ST7565R controller.
Please download specification at http://www.newhavendisplay.com/app_notes/ST7565R.pdf
[6]
Unit
°
°
°
°
ms
ms
Timing Characteristics
[7]
[8]
[9]
Table of Commands
[10]
Example Initialization Program
'------------------------------------------------------------------------------Sub Init
Reset P3.7
'set Read/write to '0' for write
Reset P3.0
'RS
Set P3.1
'reset
Reset P3.4 'E
'Set P3.3
'Reset P3.3
Waitms 2
'Set P3.3
Waitms 20
A = &HA2
'1/9 BIAS
Call Writecom
A = &HA0
'ADC SELECT , NORMAL
Call Writecom
A = &HC8
'COM OUTPUT REVERSE
Call Writecom
A = &HA4
'DISPLAY ALL POINTS NORMAL
Call Writecom
A = &H40
'DISPLAY START LINE SET
Call Writecom
A = &H25
'INTERNAL RESISTOR RATIO
Call Writecom
A = &H81
'ELECTRONIC VOLUME MODE SET
Call Writecom
A = &H10
'ELECTRONIC VOLUME
Call Writecom
A = &H2F
'POWER CONTROLLER SET
Call Writecom
A = &HAF
'DISPLAY ON
Call Writecom
End Sub
'------------------------------------------------------------------------------Sub Writecom
Reset P3.0
Reset P3.7
Set P3.6
Set P3.4
P1 = A
Reset P3.4
Reset P3.6
Reset P3.7
End Sub
Sub Writedata
Set P3.0
Reset P3.7
Set P3.6
Set P3.4
P1 = A
Reset P3.4
Reset P3.6
Reset P3.7
End Sub
'A0 low
'R/W low
'CS1
'E
'A0 high
'R/W low
'CS1
'E
'-------------------------------------------------------------------------------
[11]
Quality Information
Test Item
Content of Test
High Temperature storage
Endurance test applying the high storage
temperature for a long time.
Endurance test applying the low storage
temperature for a long time.
Endurance test applying the electric stress
(voltage & current) and the high thermal
stress for a long time.
Endurance test applying the electric stress
(voltage & current) and the low thermal
stress for a long time.
Endurance test applying the electric stress
(voltage & current) and the high thermal
with high humidity stress for a long time.
Endurance test applying the electric stress
(voltage & current) during a cycle of low
and high thermal stress.
Endurance test applying vibration to
simulate transportation and use.
Low Temperature storage
High Temperature
Operation
Low Temperature
Operation
High Temperature /
Humidity Operation
Thermal Shock resistance
Vibration test
Static electricity test
Test Condition
Endurance test applying electric static
discharge.
2
-30⁰C , 240hrs
1,2
+70⁰C 240hrs
2
-20⁰C , 240hrs
1,2
+40⁰C , 90% RH , 240hrs
1,2
-20⁰C,30min -> 25⁰C,5min ->
70⁰C,30min = 1 cycle
10 cycles
10-55Hz , 15mm amplitude.
60 sec in each of 3 directions
X,Y,Z
For 15 minutes
VS=800V, RS=1.5kΩ, CS=100pF
One time
Note 1: No condensation to be observed.
Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH.
Note 3: Test performed on product itself, not inside a container.
See full Quality Specification at http://www.newhavendisplay.com/specs/quality_spec.pdf
[12]
Note
+80⁰C , 240hrs
3
Assembly Reliability Information
Test Item
Content of Test
Test Condition
High Temperature test on adhesive
Endurance of backlight
adhesive applying high
temperature for a long time.
Vibration test on adhesive
Endurance of backlight
adhesive applying vibration
to simulate transportation
and use.
Drop test on adhesive
Endurance of backlight
adhesive applying drop force
to simulate transportation
and use.
Note 1: No condensation to be observed.
Note 2: Conducted immediately after test condition.
Note 3: Test performed on product itself, not inside a container.
Note 4: Test performed inside standard shipping packaging.
Note
>50N to separate
backlight from LCD
1,2
30Hz, 10min
35Hz, 10min
40Hz, 20min
45Hz, 20min
Corner: 25cm, 1 drop
Edge: 25cm, 1 drop
Face: 100cm, 1 drop
>50N to separate
backlight from LCD
3
>50N to separate
backlight from LCD
4
Precautions for using LCDs/LCMs
See Precautions at www.newhavendisplay.com/specs/precautions.pdf
Warranty Information and Terms & Conditions
http://www.newhavendisplay.com/index.php?main_page=terms
[13]
Result
60°C, 50% RH, 240hrs
NHD-C12864M1R-FSW-FTW-3V6 价格&库存
很抱歉,暂时无法提供与“NHD-C12864M1R-FSW-FTW-3V6”相匹配的价格&库存,您可以联系我们找货
免费人工找货