778928-01

GPIB Interface for PCI Mezzanine Bus NI PMC-GPIB ◾◾ Completely IEEE 488.2 compatible ◾◾ FIFO buffers to decouple GPIB transfers from PCI transfers ◾◾ Maximum GPIB transfer rates ◾◾ More than 1.5 MB/s (IEEE 488.1) ◾◾ More than 7.7 MB/s (HS488) ◾◾ Complete compatibility with most recent PMC specifications ◾◾ Bus-master DMA controller ◾◾ Plug-and-play design for easy hardware installation Operating Systems ◾◾ Windows XP/2000/Me/9x/NT ◾◾ Any operating system (NI-488DDK) ◾◾ Solaris (SPARC) Recommended Software ◾◾ LabVIEW ◾◾ LabWindows™/CVI ◾◾ Measurement Studio Driver Software (included) ◾◾ NI-488.2 ◾◾ NI-488DDK Overview The NI PMC-GPIB is a low-cost, high-performance IEEE 488 interface for the PMC bus – the PCI Mezzanine Card standard (IEEE P1386.1). It is a standard for mezzanine interfaces for VME motherboards. PMC is electrically a superset of desktop PCI with a different physical configuration. An NI TNT family ASIC performs the basic IEEE 488 talker, listener, and controller functions required by the IEEE 488.2 standard and increases the maximum data transfer rate of ANSI/IEEE 488.1-1987 to 8 MB/s using the highspeed GPIB protocol (HS488). The PMC-GPIB is available with NI-488.2 for Windows XP/2000/Me/9x/NT. Alternatively, you can use the NI-488DDK, a comprehensive source-code package for developing applications for other operating systems. NI-488DDK consists of more than 20 board-level functions provided in source code to give you a head start when you must design your own GPIB driver. NI-488DDK, a subset of the NI-488.2, uses the same syntax for straightforward migration of applications from NI-488DDK to NI-488.2. Ordering Information PMC-GPIB, NI-488.2, and 2 m GPIB cable for Windows XP/2000/Me/98 .................................................... 778040-01 Windows NT ......................................................................... 777485-01 Windows 95 .......................................................................... 777486-01 Solaris (SPARC) ..................................................................... 778928-01 PMC-GPIB, NI-488DDK, and 2 m GPIB cable ................................. 777431-01 BUY NOW For complete product specifications, pricing, and accessory information, call 800 813 3693 (U.S.) or go to ni.com/gpib. GPIB Interface for PCI Mezzanine Bus Specifications IEEE 488 Compatibility IEEE 488.1 and IEEE 488.2 compatible Power Consumption Typical ................................................... Theoretical maximum............................ 100 mA @ 5 V = 500 mW, 3 mA @ Vio ≤ 15 mW 129 mA @ 5 V = 645 mW, 10 mA @ Vio ≤ 50 mW Maximum IEEE 488 Bus Transfer Rate IEEE 488 interlocked handshake ........... IEEE 488 noninterlocked (HS488) handshake ........................... 7.7 MB/s (Actual rates depend on system configuration and instrument capabilities.) 1.5 MB/s Performance GPIB HS488 ............................................... 3-wire................................................ 7.7 MB/s 1.5 MB/s Environment Operating Ambient temperature ....................... Relative humidity .............................. Storage Ambient temperature ....................... -20 to 70 °C 5 to 95%, noncondensing Relative humidity .............................. 0 to 55 °C 10 to 90%, noncondensing Power Requirement +5 VDC................................................... 600 mA typical Physical Dimensions PMC .................................................. Connector GPIB .................................................. PMC .................................................. Micro D-Sub 25-pin 32-bit, Universal Signaling 7.4 by 14.9 cm (2.9 by 5.9 in.) Compliance Refer to the Declaration of Conformity (DoC) for this product for any additional regulatory compliance information. To obtain the DoC for this product, click Declarations of Conformity Information at ni.com/certification. Signaling PMC VIO ................................................ GPIB ...................................................... 3.3 V/5 V (Universal), 33 MHz HS488, 3-wire B UY ONLINE at ni.com or C ALL 800 813 36 93 (U.S.) 2 NI Services and Support NI has the services and support to meet MA IN IN TA PL your needs around the globe and through the application life cycle – from planning and development through deployment and ongoing maintenance. We offer services and service levels to meet customer requirements in research, design, validation, and manufacturing. Visit ni.com/services. Local Sales and Technical Support In offices worldwide, our staff is local to the country, giving you access to engineers who speak your language. NI delivers industry-leading technical support through online knowledge bases, our applications engineers, and access to 14,000 measurement and automation professionals within NI Developer Exchange forums. Find immediate answers to your questions at ni.com/support. We also offer service programs that provide automatic upgrades to your application development environment and higher levels of technical support. Visit ni.com/ssp. AN SERVICE NEEDS LO Y V DE Training and Certification NI training is the fastest, most certain route to productivity with our products. NI training can shorten your learning curve, save development time, and reduce maintenance costs over the application life cycle. We schedule instructor-led courses in cities worldwide, or we can hold a course at your facility. We also offer a professional certification program that identifies individuals who have high levels of skill and knowledge on using NI products. Visit ni.com/training. EL OP Professional Services Our NI Professional Services team is composed of NI applications and systems engineers and a worldwide National Instruments Alliance Partner program of more than 600 independent consultants and integrators. Services range from start-up assistance to turnkey system integration. Visit ni.com/alliance. OEM Support We offer design-in consulting and product integration assistance if you want to use our products for OEM applications. For information about special pricing and services for OEM customers, visit ni.com/oem. P DE Hardware Services System Assurance Programs NI system assurance programs are designed to make it even easier for you to own an NI system. These programs include configuration and deployment services for your NI PXI, CompactRIO, or Compact FieldPoint system. The NI Basic System Assurance Program provides a simple integration test and ensures that your system is delivered completely assembled in one box. When you configure your system with the NI Standard System Assurance Program, you can select from available NI system driver sets and application development environments to create customized, reorderable software configurations. Your system arrives fully assembled and tested in one box with your software preinstalled. When you order your system with the standard program, you also receive systemspecific documentation including a bill of materials, an integration test report, a recommended maintenance plan, and frequently asked question documents. Finally, the standard program reduces the total cost of owning an NI system by providing three years of warranty coverage and calibration service. Use the online product advisors at ni.com/advisor to find a system assurance program to meet your needs. Calibration Services NI recognizes the need to maintain properly calibrated devices for highaccuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software specifically designed for use by metrology laboratories. Visit ni.com/calibration. Repair and Extended Warranty NI provides complete repair services for our products. Express repair and advance replacement services are also available. We offer extended warranties to help you meet project life-cycle requirements. Visit ni.com/services. ni.com n 8 00 813 3693 n National Instruments info@ni.com ©2009 National Instruments. All rights reserved. CompactRIO, CVI, FieldPoint, HS488, LabVIEW, Measurement Studio, National Instruments, National Instruments Alliance Partner, NI, NI-488, and ni.com are trademarks of National Instruments. The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Other product and company names listed are trademarks or trade names of their respective companies. A National Instruments Alliance Partner is a business entity independent from National Instruments and has no agency, partnership, or joint-venture relationship with National Instruments. 2009-11300-301-101-D