GPIB-USB-HS

GPIB Controller for Hi-Speed USB NI GPIB-USB-HS • • • • • • • • • • • Completely IEEE 488.2 compatible Controls up to 14 GPIB instruments Compact size and light weight Plug-and-play configuration No external power required Built-in 2 m USB cable No GPIB cable required to connect to instruments Hi-Speed USB compliance Maximum GPIB transfer rates More than 1.8 MB/s (IEEE 488.1) More than 7.2 MB/s (HS488) Operating Systems • Windows Vista/XP/2000/Me/98 • Mac OS X • Linux ® Recommended Software • LabVIEW • LabWindows /CVI • Measurement Studio ™ Driver Software (included) • NI-488.2 Overview The compact NI GPIB-USB-HS transforms any computer with a USB port into a full-function, IEEE 488.2 controller that can control up to 14 programmable GPIB instruments. The small size and light weight of this controller make it ideal for portable applications using a laptop computer or other applications in which the computer has no available internal I/O slots. The GPIB-USB-HS works with Windows Vista/XP/2000/Me/98, Mac OS X, and Linux computers with a USB port. This controller is easy to install and use because there are no external DIP switches and you do not need to restart your computer for the system to recognize your IEEE 488.2 interface. It is a plug-and-play interface that the OS automatically recognizes and configures as soon as you physically attach it to the USB port on your computer. With the GPIB-USB-HS, you can get up and running quickly, so you can focus on developing your instrument control applications. USB Port The GPIB-USB-HS is the first GPIB interface to take advantage of the superior performance of Hi-Speed USB signaling (480 Mb/s). Plugging it into a Hi-Speed USB port provides industry-leading GPIB performance using both the standard and high-speed IEEE 488.1 handshake. Using a TNT family talker/listener/controller IEEE 488.2 ASIC, the GPIB-USB-HS implements the full range of GPIB controller functions, including those required and recommended by IEEE 488.2. It also implements normal and extended talker and listener, serial and parallel polling, service request, and pass/receive control functions. Drawing power directly from the USB port, the GPIB-USB-HS requires no external power input. With NI-488.2, you get a robust driver with additional utilities and wizards that help you troubleshoot your applications and decrease your development time (see Figure 2). Furthermore, you maintain compatibility with existing systems. Applications previously written for other National Instruments GPIB controllers can run unmodified with the GPIB-USB-HS. Connecting the GPIB-USB-HS to Your Instruments This controller does not require a GPIB cable to connect to your instruments. You can attach it directly to the GPIB port on your instrument and then connect the USB cable to the USB port on your computer. If you have multiple instruments in a daisy-chain or star configuration, attach any cables that connect to the other instruments first, and then piggyback the GPIB-USB-HS as the last connector in the stack. GPIB-USB-HS with USB Cable Included GPIB Instrument Figure 1. Easily connect your GPIB instruments to the USB port of your computer. GPIB Controller for Hi-Speed USB A. Run the Getting Started Wizard Ordering Information NI GPIB-USB-HS, NI-488.2 Software for Windows Vista/XP/2000 ............................................778927-01 NI GPIB-USB-HS, NI-488.2 Software for Windows Me/98..........................................................779704-01 NI GPIB-USB-HS, NI-488.2 Software for Mac OS X ....................................................................780570-01 NI GPIB-USB-HS, NI-488.2 Software for Linux ............................................................................779705-01 BUY NOW! B. Communicate with Your Instrument For complete product specifications, pricing, and accessory information, call 800 813 3693 (U.S.) or go to ni.com/gpib. Figure 2. Take these easy steps to get up and running with your instrument communication. BUY ONLINE a t ni.com o r CALL 800 813 3693 (U.S.) 2 GPIB Controller for Hi-Speed USB Specifications USB Port Hi-Speed USB signaling...................... 480 Mb/s Safety and Compliance Safety This product is designed to meet the requirements of the following standards of safety for electrical equipment for measurement, control, and laboratory use: • IEC 61010-1, EN 61010-1 • UL 61010-1, CSA 61010-1 Note: For UL and other safety certifications, refer to the product label or visit ni.com/certification, search by model number or product line, and click the appropriate link in the Certification column. IEEE 488 Compatibility IEEE 488.1 and IEEE 488.2 Maximum IEEE 488 Bus Transfer Rates1 IEEE 488 interlocked handshake......... 1.8 MB/s IEEE 488 noninterlocked handshake (HS488)......................... 7.2 MB/s 1Actual rates depend on system configuration, instrument capabilities, and USB port in use. Electromagnetic Compatibility This product meets the requirements of the following EMC standards for electrical equipment for measurement, control, and laboratory use: • EN 61326 (IEC 61326): Class A emissions; Basic immunity • EN 55011 (CISPR 11): Group 1, Class A emissions • AS/NZS CISPR 11: Group 1, Class A emissions • FCC 47 CFR Part 15B: Class A emissions • ICES-001: Class A emissions External Indicators Ready Green .............................................. USB full-speed Amber ............................................. Hi-Speed USB Active Green .............................................. Device active Power Requirement USB bus-powered device Maximum power consumption ........... 500 mA CE Compliance This product meets the essential requirements of applicable European Directives, as amended for CE marking, as follows: • 2006/95/EC; Low-Voltage Directive (safety) • 2004/108/EC; Electromagnetic Compatibility Directive (EMC) Note: Refer to the Declaration of Conformity (DoC) for this product for any additional regulatory compliance information. To obtain the DoC for this product, visit ni.com/certification, search by model number or product line, and click the appropriate link in the Certification column. Physical Dimensions.......................................... 10.7 by 6.6 by 2.6 cm (4.2 by 2.6 by 1.0 in.) I/O Connectors GPIB .................................................... IEEE 488 standard 24-pin USB .................................................... USB standard series A plug Operating Environment Temperature ........................................ 0 to 55 °C Relative humidity ................................ 10 to 90%, noncondensing Waste Electrical and Electronic Equipment (WEEE) EU Customers: At the end of their life cycle, all products must be sent to a WEEE recycling center. For more information about WEEE recycling centers and National Instruments WEEE initiatives, visit ni.com/environment/weee.htm. Storage Environment Temperature ........................................ -20 to 70 °C Relative humidity ................................ 5 to 95%, noncondensing BUY ONLINE a t ni.com o r CALL 800 813 3693 (U.S.) 3 NI Services and Support MA IN IN TA PL AN SERVICE NEEDS LO Y V DE EL OP NI has the services and support to meet your needs around the globe and through the application life cycle – from planning and development through deployment and ongoing maintenance. We offer services and service levels to meet customer requirements in research, design, validation, and manufacturing. Visit ni.com/services. Local Sales and Technical Support In offices worldwide, our staff is local to the country, giving you access to engineers who speak your language. NI delivers industry-leading technical support through online knowledge bases, our applications engineers, and access to 14,000 measurement and automation professionals within NI Developer Exchange forums. Find immediate answers to your questions at ni.com/support. We also offer service programs that provide automatic upgrades to your application development environment and higher levels of technical support. Visit ni.com/ssp. Training and Certification NI training is the fastest, most certain route to productivity with our products. NI training can shorten your learning curve, save development time, and reduce maintenance costs over the application life cycle. We schedule instructor-led courses in cities worldwide, or we can hold a course at your facility. We also offer a professional certification program that identifies individuals who have high levels of skill and knowledge on using NI products. Visit ni.com/training. Professional Services Our NI Professional Services team is composed of NI applications and systems engineers and a worldwide National Instruments Alliance Partner program of more than 600 independent consultants and integrators. Services range from start-up assistance to turnkey system integration. Visit ni.com/alliance. OEM Support We offer design-in consulting and product integration assistance if you want to use our products for OEM applications. For information about special pricing and services for OEM customers, visit ni.com/oem. P DE Hardware Services NI Factory Installation Services NI Factory Installation Services (FIS) is the fastest and easiest way to use your PXI or PXI/SCXI combination systems right out of the box. Trained NI technicians install the software and hardware and configure the system to your specifications. NI extends the standard warranty by one year on hardware components (controllers, chassis, modules) purchased with FIS. To use FIS, simply configure your system online with ni.com/pxiadvisor. Calibration Services NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software specifically designed for use by metrology laboratories. Visit ni.com/calibration. Repair and Extended Warranty NI provides complete repair services for our products. Express repair and advance replacement services are also available. We offer extended warranties to help you meet project life-cycle requirements. Visit ni.com/services. ni.com • 800 813 3693 National Instruments • info@ni.com *351670A-01* 351670A-01 2008-10282-301-101-D ©2008 National Instruments. All rights reserved. CVI, HS488, LabVIEW, Measurement Studio, National Instruments, National Instruments Alliance Partner, NI, ni.com, and SCXI are trademarks of National Instruments. The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries. Other product and company names listed are trademarks or trade names of their respective companies. A National Instruments Alliance Partner is a business entity independent from National Instruments and has no agency, partnership, or joint-venture relationship with National Instruments. ®